Options for corner cabinets for kitchen sinks, how to choose. How to choose or make a comfortable cabinet for a kitchen sink with your own hands Make a frame for a sink with your own hands

Installing a sink in the kitchen - do it yourself, reliably and firmly

One of the indispensable attributes of any kitchen is the sink. It is required to the same extent as a stove (gas or electric). But installing a sink in the kitchen with your own hands is much easier than connecting a stove, if you know the basic instructions and the typical secrets of such work.

Different sinks are needed, different sinks are important
How to assemble a kitchen sink - install a cabinet
How to install an overhead sink on a cabinet - brief instructions
Installing a sink in the kitchen - do-it-yourself mortise installation

Indeed, kitchen sinks are produced in a wide range of products, which can make your eyes wide open in a specialized plumbing store. Kitchen sinks can be divided into at least six categories:

Wall-mounted, mortise and overhead sinks. Mounted option is now rare, it is more relevant for communal apartments and government institutions than for modern renovation. But inset and overmount sinks compete with each other in popularity; their long-term reliability and aesthetic appeal are comparable;
Sinks made of stainless steel alloys, chrome-plated or nickel-plated, sinks made of natural granite or porcelain stoneware artificial stone, acrylic and even glass (!). However, due to practicality, 90% of all models are made of stainless steel and representative porcelain stoneware;
Sinks are angular and standard, round, oval, square, rectangular and shaped. The more intricate the shape of the sink, the more difficult it is to give it impeccable cleanliness and maintain a sparkling shine on a daily basis. After all, the sink is used not for beauty in the living room, but for mundane household needs in the kitchen;
By design, a distinction is made between ordinary single sinks and sinks with two bowls (of the same or different sizes, the same or various shapes etc.). There are convenient models with water overflow from one bowl to another;
According to the location of the mixer - on the wall or on the sink itself (the first option is rare);
According to availability additional options– possibility of installing a water filter, connections for washing machine, automatic valves for adjusting drainage, additional taps for connecting garden hoses, etc.

Shells from of stainless steel have gained overwhelming popularity due to their reasonable price, durable functionality, compatibility with a wide variety of kitchen renovations and ease of sanitization.

You can check the quality of the steel alloy of the sink right in the store - an ordinary flat magnet will stick to it very firmly, but with bad steel the magnet will “fly off” at the slightest vibration.

Granite and steel sinks are available in overhead and inset versions; installing a sink in the kitchen with your own hands is possible for both. However, first we need to take care of the furniture base of our installation efforts.

2 How to assemble a sink in the kitchen - installing a cabinet

Recessed and overhead sinks are installed in cabinets and cabinets, with opening (less often sliding) doors in the front and an empty opening in the back. Assembling these elements kitchen set has its own characteristics. The fact is that they do not have internal bulkheads; they can interfere with the connection of the sewerage system and water pipes. This means that there will be no additional stiffeners inside the cabinet. If a countertop sink is installed, even the countertop is missing; it is replaced by a steel sink panel.

The assembly of the sink cabinet should be much more reliable and durable than other parts of the kitchen set. It needs to be installed on special supports, because... Even with the best sealing, water leaks are possible. It wouldn’t hurt to treat the material itself with water-repellent compounds. Inside the bedside table, it is necessary to provide fastenings for tightening jumpers - they are installed after connecting the sink to the communications for the strength of the entire structure. The lintels themselves can be made from flat and thick planks, which will serve as additional mini-shelves inside the cabinet.

3 How to install an overhead sink on a cabinet - brief instructions

Overhead installation option kitchen sink It can be ordinary or “sliding”. In the latter case, the sink itself is equipped with curved slides on the side and front side, there are special grooves on the bedside table. After you have successfully assembled a sink in the kitchen, all that remains is to slide the sink into these grooves, move the structure to the wall - and you can connect the communications.

If you use a direct overhead mounting option, you will have to seal all joints. High-quality waterproof sealant combines the properties of glue and a protective waterproof composition. The upper perimeter of the open cabinet is generously coated with this composition; all that remains is to precisely place the sink itself on top.

A large and heavy overhead sink cannot be installed using sealing adhesive alone!

Otherwise, one day it will fall inside the cabinet along with the dishes, destroying the sewer and breaking off the pressure water hoses. Negative impressions from such an accident will be available to both you and your neighbors below. As well as eliminating the plumbing collapse and renovating two rooms from the personal budget. How to install an overhead sink on a cabinet without the risk of such an incident? Using auxiliary bars or internal sheathing.

Simple overhead sinks are usually equipped with additional fasteners. Massive bars, precisely screwed with wrong side cabinets. It is necessary to accurately mark the bottom edge of the pre-installed (without glue!) sink and build an internal sheathing along this line. Then the sink will rest on auxiliary bars, and not on the thin end of the bedside table. The operation is similar to hidden installation of sheathing. only in the final stage is it supplemented with adhesive sealing of the joint between metal and wood.

4 Installing a sink in the kitchen - do-it-yourself mortise installation

Before attaching a metal sink to the cabinet using the mortise method, you need to make sure that the cabinet is strong and can be precise installation the entire structure into the installation opening. Experiment with moving the cabinet in advance - after fixing the sink you will only have to do this once. After connecting the sewerage and water supply, the cabinet with the sink should stand like a glove, without distortions or vibrations.

How to install a sink in the kitchen with your own hands - step-by-step diagram

Step 1: Marking

Most mortise sinks are sold with a ready-made template; it acts as a packaging container. It is enough to cut out such a template from cardboard and attach it to the countertop at the location of the sink - and the outline seat ready.

If there is no template, you will have to make it yourself. To do this, it is better to use thick cardboard (for example, from a TV or monitor). Having measured inner part sinks, transfer this size to the cardboard surface and cut off a few centimeters more. It is better to cut a piece of cardboard several times than to look for a new piece.

Step 2: Location

The proverb about the need to measure seven times before the first cut is very relevant for our work. You can move the finished template around the tabletop easily and freely - until you start sawing right through it. So take into account how the tap will open, where the filter will be, how it will be positioned kitchenware and so on.

The cardboard template should be traced as evenly and accurately as possible. To do this, attach it to the tabletop with ordinary tape and draw one thin line with a pencil. After which the “cardboard assistant” peels off and goes into waste paper; we will no longer need it. We cover the perimeter of the future hole from the outside with masking tape for 8-12 cm in order to prevent it from being damaged by mechanical tools.

Step 3: Drill and saw

Yes, yes, the first mechanical tool will be a drill, not a saw. A drill with a diameter of 2 mm is selected and several closely spaced holes are drilled in the place where it is convenient to start cutting out the contour. The holes are connected into a single groove using a chisel.

It is convenient to saw the tabletop with a wood jigsaw. Just don’t forget to stock up on extra blades - thick tabletops are difficult to saw, and the blade is likely to break if it deviates slightly from the vertical. Take your time and move the jigsaw confidently - it is more difficult to correct a crooked cut than to immediately cut a hole along a plumb line, with a strictly perpendicular cut.

Step 4: Complete the installation

On the end of fresh mounting hole Apply sealant and insert the sink tightly. We hold the sink under load for 10 to 60 seconds (depending on the type of sealing compound). Carefully remove excess glue from the outer and inside sinks and wait several hours until the sealant completely hardens. We connect hoses, pipes, sewerage, install a faucet and use the new sink for your pleasure.

Today we will show you how to use MDF boards and mosaics to make an attractive vanity unit that can be installed in the bathroom or kitchen.

For this you will need the following materials:

universal glue (latex based), it is moisture resistant;

First you need to make a template from a piece of paper.

Options for kitchen cabinets under the sink, their pros and cons

To make it easier, place the shell on paper and trace its outline.

Using a paper sample, mark the slab of the required size.

Then, using a drill, drill four holes. They are necessary in order to cut an opening under the sink with a jigsaw.

For reliability, it is better to use two MDF boards.

Before installing them together with the sink in place, it is necessary to make a hole in the cabinet for communications.

Now you can install the finished surface using corner fastenings and self-tapping screws. This part of the work can be entrusted to men, but the next stage can be done by women.

All that remains is to cover the surface with mosaic tiles.

Apply it in small sections, as the glue hardens quickly (10-15 minutes).

A few more touches.

And this is what the mosaic looks like after grouting.

Reference

MDF boards are made from fine wood chips by dry pressing at high temperature and pressure.

They are distinguished by the fact that during the production process they are given special properties, such as water resistance, biostability and fire resistance.

Fiberboards began to be produced in America in 1966. In 1997, the production process was established in Russia. But the main global producer at present is, of course, China.

MDF boards are an inexpensive and easily processed material. They have a homogeneous structure that lends itself well to processing, which is why they are recommended to be used in the manufacture of elements for bathrooms and kitchens.

Prices are rising every day, and now, in order to renovate the kitchen and update the kitchen set, you will have to invest heavily. However, you can save money, not only on repairs yourself, but also on kitchen furniture.

Today we will look at how to make a cabinet for a sink with your own hands as cheaply as possible.

The sink is one of the main elements in the kitchen. If you decide to assemble the kitchen set yourself, then this element must be prepared first.

According to our design, the width of the sink cabinet in the kitchen is 75 cm. The doors will open as standard, i.e. We will install them on hinges, not on rollers.

The project assumes that a single tabletop will be installed along the entire length of the kitchen unit, which is why the upper part of the cabinet is not manufactured. At the same time, we will buy doors and the front part of the shelf to speed up the process and make the cabinet under the kitchen sink more attractive. However, a cabinet for a sink can be assembled cheaper if you make these elements yourself. But at the same time you will have to seriously work on your appearance. We will consider these points separately below in the text.

Below is the drawing kitchen cabinet under the sink with the specified dimensions of width, length and height, which are 75, 60 and 87 cm, respectively.

In order to assemble a cabinet for a sink with your own hands, we will need the following tools:

Tape measure, pencil
Screwdriver or cross-head screwdriver
Screws
Drill
Sandpaper
Paint brushes (if you will be painting the cabinet under the sink)

Also, in the process of assembling a cabinet for a kitchen sink, the following materials will be required:

Back panel pressboard
Plywood sheet for crossbars
Sheet Chipboard thickness from 12 mm (optional with cladding) for side walls
Facing tape to match the color of the chipboard cladding
2 doors (if you don’t make it yourself)
Front panel for the top shelf (if you don’t make it yourself)
Guides and rollers for the top shelf
Handle for top shelf and 2 door handles
4 hinges for installing doors
Wood paint (in case of using chipboard without cladding)

So, let's look at how to assemble a cabinet for a sink with your own hands.

The first step in assembling a cabinet for a sink with your own hands in the kitchen is preparing the side walls.

As a material for the manufacture of these elements, you can choose a chipboard, preferably lined on one side. Choose the color and texture of the cladding to suit your taste. In our project we will use a white silver chipboard and a matching color facing tape.

Chipboard with cladding

If, however, you decide to use a chipboard without cladding to save money, then you will need to think about color scheme for the future cabinet under the kitchen sink and stock up on paint.

Chipboard without cladding

The dimensions of the side walls should be 87 by 60 cm. Moreover, in the lower part of the front walls it is necessary to cut a rectangle measuring 6 by 11 cm.

If in your kitchen there is installed along the wall along which the kitchen set will be located floor plinth, then it is recommended to cut the prepared side walls at an angle to ensure that the sink cabinet fits snugly against the wall.

The second step is to attach the crossbars to the prepared side walls.

For crossbars, you can take ordinary plywood with a width of at least 12 cm. There is no point in heavily processing and preparing these crossbars, since they will not be visible and hidden from view.

There are two ways to fasten the crossbars and walls.

The first method is to use steel corners for furniture - two for each joint plane. The second is to screw the screws directly into the crossbar, but in this case you will have to use thicker plywood or even a chipboard as a crossbar.

At the same time, to hide the caps of the fasteners, you will need linings to match the color of the walls.

The third step in assembling a do-it-yourself sink cabinet for the kitchen is attaching the lower base. It is best to choose the same material as for the side walls, i.e. Chipboard board. From it you need to cut a rectangle measuring 70 by 50 cm. It is best to secure the lower base by screwing the screws directly into the crossbars fixed at the previous stage.

At the same time, for ease of use of the cabinet under the sink, the caps should be recessed below the surface by drilling a small recess for them, which after installation should be covered with wooden filler.

The fourth step, one of the last in assembling a cabinet for a sink with your own hands, is to attach the upper crossbars to secure the upper part of the cabinet for a sink.

The first crossbar will be positioned vertically and fastened so as not to protrude beyond the perimeter of the cabinet under the sink. It is to this cross member that the back wall will be attached. The second cross member will be located, on the contrary, horizontally. Just like in the second step, we recommend using chipboard rather than plywood for the crossbar for ease of installation. The thickness of the slab will allow you to fasten the elements of the kitchen cabinet without the use of additional fasteners.

If the chipboard panels were chosen without cladding, then it’s time to paint all the elements of the cabinet.

The fifth step in assembling a cabinet for a kitchen sink is fixation back wall locker

This wall will not perform any functions other than visual isolation of the cabinet and will not bear the load. In this regard, pressed cardboard can be chosen as the material for this element. In addition, in such a wall it will be easier to cut holes for connecting communications.

The sixth step is to separately assemble the front frame. The dimensions of the top shelf and doors can be arbitrary depending on personal preferences. The dimensions selected for this project are shown in the drawing below.

The remaining unclosed ends of the side walls made of chipboard boards in the lower part of the cabinet should be sealed with end plastic tape using an iron.

The seventh step is to install the top shelf on casters.

We will not consider the shelf assembly process in this article due to the same type of process for all products; the main thing is to take into account the actual dimensions. You can either make the front panel of the shelf yourself, but then it will be quite simple, or you can order it from a company with a more interesting profile, like the doors.

The eighth step is attaching the cabinet doors under the sink.

We choose the pattern, profile, texture and color of the doors according to your taste. In our project, we chose simple doors with a rectangular interior. Such doors can even be bought in an online store, and are most often called “Facade to body”. If desired, you can even choose doors with grooved glass. It all depends on your taste and budget.

The hinges determine how wide the doors will open and whether they will warp. Hinges vary in opening angle and installation principle, and there are even models with closers. The choice of loops is a topic for a separate article.

AND The final stage– bring appearance the resulting do-it-yourself sink cabinet in the kitchen to a decent level.

The handles should be screwed to the doors and the front panel of the top shelf.

In our project, we attach not one, but two handles to the shelf. Moreover, we select the color of the handles in contrast to the color of the cabinet itself under the sink.
So, here we look at how to assemble a cabinet for a sink with your own hands. Now that other elements of the kitchen set are ready, it will be possible to install a single countertop and sink.

DIY bedside table - easy to make and practical

A bedside table is a diverse concept. This can be a bedside container for newspapers and a tea mug, or a stand for a huge TV with built-in speakers and an electronic rotating system to attract the viewer's attention.

Such a simple concept - and an endless number of execution options. Making a bedside table with your own hands is quite simple, but it is important to decide necessary design. My friend needed a kitchen cabinet with one top drawer.

If you please.

Appearance of the manufactured bedside table

To make a bedside table you need

Here I give a list of tools that it would be better for everyone to keep in constant readiness, along with a fishing rod, favorite gun and chess:

Drill-driver.
A battery-powered one would be optimal if the household also has a hammer drill.
Set of drills. In this case - on wood.
Set of bits. If you want to assemble the furniture yourself, the kit should include a bit, which is a hexagon for confirmations.
Hinge cutter 35 mm in diameter.
Iron.
Roulette.
Pencil.
A carpenter's tool called a "right angle", with a measuring ruler.
Sandpaper, dry rag.

I’ll immediately note about the iron and other objects that were not clear at first.

Since you will be forced to order cutting on the side (a chipboard sheet measuring 1830x2440 mm is the smallest), it makes sense to save on gluing the edges. Now on sale is a 0.5 mm thick melamine edge in the color of the material, which is easy to glue on yourself. Since it has an adhesive base, just attach it to the desired end with the beautiful side up and iron it with a heated iron.

Using a dry cloth, press the still hot edge to achieve good adhesion. Excess edges are removed with a dull knife and the edges are processed with sandpaper.

Detailing the bedside table

A cabinet made with your own hands may differ in content, functionality and appearance.

This largely depends on the amount you are willing to spend on fittings. Here I am writing details of the simplest and cheapest cabinet. Drawer without runners, facades - laminated chipboard.

772x500 – 2 pcs., sides of the cabinet.
368x500 – 2 pcs., bottom and shelf.
368x100 – 3 pcs., base and two upper strips.
480x110 – 2 pcs., drawer sides.
334x110 – 2 pcs., box front and back walls.
150x395 – drawer front.
515x395 – cabinet door.

All dimensions are for chipboard with a thickness of 16 mm.

We take a special kitchen tabletop, 28 mm thick.

Its size is 525x400 mm.

Fiberboard for the back wall of the cabinet and the bottom of the drawer:

670x395 mm – rear wall.
475x365 mm – bottom of the box.

I have already written how to glue the edge, now it’s time to prepare the parts for assembly. The main fasteners for us are confirmations, for which we need to drill holes. We drill into the plane with a diameter of 8 mm, into the end of the parts - with a diameter of 5 mm.

The figure shows which parts are drilled into the end, and which into the plane - simply based on general design cabinets.

Nightstand assembly diagram

List of required accessories

A do-it-yourself bedside table is also our business card to everyone who doubted our abilities, so even in an inexpensive version, fasteners need to be taken as seriously as possible.

We buy from a furniture fittings store:

Confirmats 5x70 – 22 pieces. It is enough to screw the tie strips and the plinth one confirmat on each side.
Self-tapping screws 4x30 – packaging. They will come in handy for other jobs around the house, but specifically here they are needed in order to screw the tabletop to top bars, and the front of the box - to the front wall of the box box.
All this is screwed up from the inside.
Self-tapping screws 4x16 – packaging. This is a fastener for hinges and hardboard (fibreboard). You should buy it with a hidden cap, and also deepen it into the bottom of the drawer so as not to scratch the shelf.
Furniture hinges – 2 pcs.
Which sink cabinet to choose?

Since our cutter is 35 mm in diameter, we buy the corresponding hinges.
Furniture handles – 2 pcs. For the front of the drawer, it is better to buy additional screws for handles, 35 mm long.

Assembly diagram of our cabinet drawer

Making a bedside table

It is better to coordinate the production of bedside tables of this model with friends or acquaintances - simply because chipboard sheet you can make two and a half of them.

Assembly is so simple that you can start selling “extra” cabinets. To fully satisfy potential customers and your own, screw furniture legs, the so-called “hooves,” onto the bottom sides of the furniture.

They will help you position the cabinet on an uneven floor. Adjustable legs of this type can also be found in specialized stores that sell furniture fittings.

Ready bedside table

In general terms, we have already understood how to make a bedside table with our own hands - it remains to take into account two very important technical points.

Sampling for loops. One constant should be remembered: The distance from the edge of the facade to the center of the hinge hole is always 22 mm.
Naturally, for hinges with a seat size of 35 mm. Above and below the door it is usually marked at a level of 60-80 mm - this is not critical if there are no design features. Then you can simply attach the facade with screwed hinges to the sidewall at the desired height and secure it to the body.
Right angles.
When assembling a drawer or cabinet box, always check the geometric correctness of the resulting parallelepiped. Otherwise, the product will turn out to be lopsided and with poorly opening facades.

That's all, good luck with your work.

You can use steel pipe to make a solid base under the sink that will last longer. The stand is especially suitable for summer cottages.
A stand under the washbasin can also be purchased at the store. However, there are practically no steel structures.

Wooden and ceramic sinks are not suitable in some cases. Steel structure Can be easily used in suburban areas, indoors utilities and in production.

Advantages and disadvantages of steel drains

Steel under sinks, well protected from moisture, can withstand a very long time. They are resistant to high temperatures and adverse external conditions. For example, such laundering cannot be destroyed by chemicals.

The stand can be made from old pipes, especially if the craftsman has no special requirements for the aesthetic component.

The equipment can be placed under the sink from steel pipes. During sanitation of sanitary equipment, this design will not cause problems. Removing this product is very easy.

The downside to steel gutters is that they often don't look as nice as ceramic or wood ones.

Of course, a trained craftsman can make it attractive, with extra finishing.

Hull under the flow of your hand. 6 options.

Wood, as well as plywood and particle boards, are suitable for finishing the frame. If necessary, you can use steel sheets.

List and materials

To make a steel washbasin, you will need:

— pipes are cut to the dimensions indicated in the drawing;
— welding;
- bend;
— paints and other protective compounds.

Sink installation

The sink is assembled in several stages.

First, you must take preliminary measurements to purchase the required number of pipes. Measure the height of the frame and its dimensions. To accurately determine the volume of the stand, the craftsman must have a sink that will be mounted on the frame.

The height of the frame is determined individually.

Usually it is 70 - 85 cm. This optimal height for an adult. If the skeleton is lower or higher, the use of a washbasin is inappropriate. The leader must also maintain the position of the mixer.

One thing to keep in mind is that the water does not fall to the ground and the flow from the faucet does not cause splashing.

Once the measurements are taken, it's time for the pipes. You can buy pipes already cut to the specified sizes. Suitable for stainless steel pipes. It is better to make the top of the abyss a single figure. This means that the hose is not cut, but rather bent using a pipe bender. This will make the frame look much better. After purchasing the hose, you must first wrap the top of the frame and weld that part of the foot onto the stand.

If you just weld the legs together but don't connect your bottom ends, the stand will be unstable.

It may even break with occasional falls. Therefore, the lower parts of the frame must also be connected to the pipes. Now the worst work is over and you can start cosmetic decoration. The stitch must be finished and the design must be colored.

If necessary, you can further complete the structure. For example, a steel frame can protect elements for fastening wooden sheets.

The most economical material would be chipboard. These sheets are cheap and durable. Drywall will not work in this case because it is too sensitive to moisture. Steel plates can be welded to the sink directly on the frame. We must not forget the door and consider the possibilities of access to the pipe.

In the production of washbasins, the stand is usually not subjected to special coatings other than painting.

In a commercial environment decorative finishing doesn't last long. You can come up with a more attractive option for doing laundry at home.

One of the important characteristics of any interior is the organization of storage. Any housewife will confirm that this issue is especially acute in the kitchen or bathroom. In order to use every centimeter of space under sinks and sinks, cabinets are installed that create extra bed for storing various household products, and also allow you to close communications, making the interior more harmonious and cozy.

Preparatory stage

In order for the work to go smoothly, it is necessary to prepare all the tools in advance, decide on the materials, and take measurements. These efforts can provide half the success if you do not ignore the preparation stage.

Choosing material

The optimal material for such a product is different for everyone. Let's look at the features of the most popular ones:

Wood is a classic, durable and very “cozy” material, quite heavy and massive, which should be taken into account when manufacturing hanging models. Must have moisture resistant coating. Quite an expensive option.

Drywall is a common and inexpensive material, which is easy to work with, and waterproof sheets are commercially available. However, it is quite fragile and frame reinforcement will be required for mortise sinks.

MDF - its advantages are moisture resistance and strength, which is reflected in the cost - not the cheapest option.

Plastic – great option for the bathroom, is not afraid of water, however, it requires reinforcement of the structure, because it bends easily.

Glass is pretty complex material, it is worth choosing if you are confident that you can handle it. Alternatively, you can make it out of glass individual elements structures (internal shelves or doors), which will look great, for example, in combination with natural wood.

IMPORTANT!

If a cabinet is one of your first projects, we advise you to choose a simpler and cheaper material option: plasterboard or MDF.

We take measurements

The dimensions of the cabinet directly depend on the size of the sink being installed, as well as on the availability of free space in this area of the room. The countertop can be exactly the size of the sink, or it can be much larger, depending on the available space around the sink.

Height usually varies between 70–100 cm.

Required materials and tools

List necessary tools will largely depend on the material chosen, but you you will definitely need:

screws;
screwdriver;
drill;
screwdriver;
hacksaw or jigsaw;
hammer;
pliers.

In addition to parts made from the main material, you will also need fittings - hinges, handles, as well as brushes, varnish and paint, if you need to further improve the aesthetic properties of the cabinet.

Auxiliary elements such as pencil, tape measure.

DIY kitchen sink cabinet: step-by-step guide

Ready-made furniture does not always fit in size due to the characteristics of the room; making custom-made furniture takes a lot of time and is not cheap at all, but there is a way out - to make a cabinet yourself.

Creating a sink cabinet with your own hands is not so difficult if you have minimal skills in working with tools and the selected material.

Step 1. We cut out blanks from the selected material in accordance with custom sizes. You will need the following parts:

side walls (2 pcs.);
doors (1 or 2 depending on design);
bottom plinth.

Step 2. We attach the bottom and side walls to each other using screws. The bottom should be located above the top border of the baseboard.

Step 3. We fasten the lower plinth.

Step 4. We install two spacer strips - one on the top of the front part, flush with the side walls, the other on the back part 20 cm below the top.

Step 5. We prepare holes for attaching the hinges on which the doors will be hung, and screw the hinges.

Step 6. We hang the doors on their hinges and insert the sink into the assembled cabinet body. Ready!

Now you can safely place various items under the sink, because there is now enough space there.

The kitchen sink cabinet has become such a familiar element of the interior that it is often not noticed. Not only the appearance of the kitchen, but also its functionality as a whole depends on it. Such a cabinet can be purchased at any furniture and plumbing store, but it is much cheaper and more enjoyable to assemble this kitchen element with your own hands, especially since it consists of a small number of parts and does not require skill.

The sink cabinet has become a familiar element kitchen interior

Exterior view and internal structure of the washing cabinet

The main difference between a washing cabinet and other kitchen cabinets is the absence of internal shelves and drawers, since the entire space is occupied by the sink and the communications connected to it. Some models of such cabinets try to equip drawers, but the presence of a constant source of moisture does not allow storing many items in them, especially dishes and substances that are afraid of water.

Cabinet with drawer system

When making a cabinet with your own hands, it would be best to abandon the idea of arranging the interior space with shelves or drawers, since they greatly complicate the design, and their practical value is very questionable.

A standard sink cabinet consists of two side walls, a bottom, a back wall, fronts and a countertop with a cutout for the sink. If the kitchen is equipped with an overhead sink, the countertop is not installed. Also, the back wall is often excluded from the components for a kitchen sink, since it interferes with the normal supply of communications.

Construction and standard sizes cabinet

Standard cabinet dimensions are 85 cm high, 60 cm wide and 50 cm deep. Of all the parameters, it is recommended to change only the width, since this alone does not affect the ease of use of the sink and depends primarily on the width of the sink.

The optimal height of the sink is considered to be 84-87 cm, since with such parameters you can use the sink while washing dishes without bending over. Even small deviations from this height can cause discomfort and fatigue in people of average height.

Materials for the production of a sink cabinet

The kitchen is a constant source of high temperature and humidity. Therefore, all materials for production kitchen furniture must have increased moisture resistance. This requirement especially applies to cabinets for sinks, since the proximity of a water source quickly renders them unusable. wooden surfaces, which do not have sufficient waterproofing.

Corner sink cabinet made of natural wood

Modern kitchen furniture is made from the following materials:

Chipboard (chipboard). This traditional material, from which most kitchens in the lower price range are made. The main disadvantage is that even if there are minor coating defects (scratches, cracks), the slab quickly absorbs water and swells.
MDF is a board made of fine wood impregnated with a binder. Compared to chipboard, it retains moisture much better, but requires no less reliable protection.
Natural wood. Premium kitchen furniture and facades are produced from it. After high-quality treatment with waterproof varnishes, such a material becomes hydrophobic, but prolonged exposure to high humidity in combination with elevated temperature still negatively affects the properties of wood.

For the manufacture of most sink cabinets, chipboard or MDF is used, which is important to reliably protect from moisture penetration, especially in places of cuts and holes. Basic methods of protecting furniture boards:

Laminated chipboard cabinet

Lamination is the most common type of coating for chipboard and MDF. Sheets for furniture production under impact high temperature and pressure are covered with a special film, after which a protective varnish is applied.
Coating with polymer materials is used mainly to protect MDF boards. For this purpose, acrylic, plastic, and enamel are used. All these materials not only help protect furniture from moisture and physical influences, but also give the kitchen a beautiful and bright look.

Making a cabinet for a sink with your own hands

Before you start making a sink cabinet, you should choose the material from which it will be made, determine the appearance and dimensions. Since cabinet fronts are not easy to make, it is recommended to buy them separately and focus only on assembling the cabinet frame. This will give you the opportunity to make a product that will hardly differ in appearance and characteristics from store-bought analogues.

Sink cabinet assembly diagram

The whole process can be divided into several stages:

Purchase of materials. The main components that you will need: chipboard or MDF boards (16-18 mm thick) for the cabinet walls, a plate (22-25 mm thick) for making the countertop (if the sink is mortise or under-mounted).
Marking and cutting materials. In the absence of skills in sawing chipboard and MDF is better All you have to do is entrust this important process to specialized companies that charge a relatively small fee for cutting and edging furniture boards.
Assembly of component elements. On at this stage You may find the standard instructions for assembling a sink cabinet useful, but there is nothing particularly complicated at this stage, since there are few constituent elements, almost all of them are different and have a clearly defined purpose.
Installation of a sink and connection of communications. At this stage, it is important to accurately determine the position of the drain neck and connect a siphon to it, drain pipe, and if there is a washing or washing machine in the kitchen dishwasher- extra plums for them. Also very important reliable waterproofing all connections, which will prevent the washing cabinet from getting wet in the future.

Selecting and assembling a sink cabinet is a responsible process that will allow you to preserve the beautiful appearance of your kitchen for a long time and ensure comfortable conditions to use this integral element of the kitchen set.

We spend a lot of time in the kitchen when we are at home. Here we communicate with family and friends, cook delicious dishes, and just relax with a cup of delicious tea. That is why the interior and style of this room are given the greatest importance. After all, a kitchen should not only be convenient and comfortable, but also beautiful. Besides quality repairs and the most modern household appliances, one of the main details of the kitchen interior is furniture.

What to do if one of the elements of the set, for example, a kitchen cabinet under the sink, has become unusable? But this particular piece of furniture is an important independent element and has specific design features. The kitchen sink cabinet is constantly exposed to negative influence moisture and therefore breaks more often. If this happens, then there are several options to solve the problem.

The first is to completely change the headset. But this is very expensive and not always advisable. The second option would be to purchase only a cabinet, but you may not be able to find exactly the same one, especially if the furniture was purchased a long time ago. Another solution is to restore a broken cabinet or make a new one yourself. In order to accomplish this, you need desire and the most basic skills. And also an understanding of some of the special features of this element of kitchen furniture.

Designs and types of sink cabinets

The simplest basic version of a cabinet is a regular one floor cabinet without a back wall and often without a bottom, hollow inside. Thanks to this solution, it is very easy to connect communications to the sink, and it is also possible to choose a sink of almost any depth and shape. More difficult option is equipped with special elements inside and allows rational use of the space under the sink. There are two types of placement of a cabinet under the sink in the kitchen - linear and angular.

For linear placement, cabinet and others floor elements The headset is installed in the same plane. The cabinet itself under the sink has a rectangular shape and a standard width of 60 cm. But the length of the bedside table can be different. It depends on the dimensions of the sink itself.

There are two types of corner sink cabinets - trapezoidal and L-shaped. The most common is the second option. Due to the shortened length of one of the side parts, easy access to the inside of the cabinet is provided. Such models are more ergonomic and fit very succinctly into almost any interior, especially in small kitchen spaces. In such cabinets it is better to install narrow doors with a maximum width of 30 cm.

The trapezoidal cabinet is more complex design. Its frontal surface can be broken, rounded or linear. Due to the increased size of such cabinets, they can accommodate sinks of different sizes and shapes, for example, consisting of several bowls. Inside these kitchen cabinets under the sink there is a fairly large space where you can place not only a siphon, but also various systems for storage - retractable, rotary or roll-out.

What is needed to make a cabinet for a sink?

If you are planning to make a cabinet for a kitchen sink with your own hands, then first of all you need to decide on its design, shape, size and material from which it will be made. Kitchen furniture is most often made from chipboard, MDF or solid wood natural wood. Wood, especially valuable species, looks very beautiful in already finished products, will make the interior elegant and rich, but it is also quite expensive. Modern MDF and chipboard are of high quality and, which is very important for a sink cabinet, are impregnated with special moisture-resistant compounds. If you choose one of these materials, then it is best to use laminated panels for the facade parts - they are higher quality, beautiful and durable.

The dimensions of the cabinet depend on the area of the entire room and the size of other kitchen furniture, as well as the dimensions and shape of the sink. The design of the sink with cabinet should match the overall interior of the kitchen and other elements of the furniture. And, of course, you need to choose the color of the panels identical to the rest of the furniture. Otherwise, the set will look disjointed. And this is not beautiful and not stylish.

Stages of making a bedside table

After you have decided on the material, shape and size, you need to make a drawing according to which the cabinet will be assembled. And also buy everything necessary details and materials for its manufacture:

hinges for doors;
special corners;
self-tapping screws;
primer;
putty;
varnish for opening a finished product;
sandpaper.

To make and install a kitchen sink cabinet with your own hands, you will need the following tools:

tape measure and ruler;
hacksaw;
screwdrivers;
hexagon;
putty knife;
tassels.

When everything is ready, you can start working. First of all, we cut out the details of the future bedside table for the kitchen sink according to the drawings. This cabinet requires: 2 sides, a bottom, upper spacers, which depend on the width of the cabinet, one or two doors, a tabletop and a lower baseboard. For some models, for example, with a triangular sink, you will also need four legs.

Important: When cutting panels, you need to ensure that the chips are located at the bottom. A 16mm indentation must be made from the front edge.

Then you need to evenly distribute a layer of putty over all elements of the cabinet and carefully level it with a spatula. After the surfaces have dried, you need to sand them with sandpaper. After making sure that the dimensions of all structural parts correspond to the drawings, we proceed to assembly. Since in most cases the back wall is not installed, furniture corners should be used to increase the stability of the sink with a kitchen cabinet. When the cabinet is assembled, it needs to be painted or varnished.

Interesting: A special tint varnish is best suited. It must be applied in several layers and when working, use a brush with natural bristles.

Unfortunately, the realities of life for the average resident of Russia are such that kitchens in most houses, and especially apartments, are of modest size. They are more or less able to satisfy the needs of a not too spoiled family.

Design of a small kitchen with a sink by the window

If standard furniture samples are suitable, then there will be fewer difficulties in equipping the kitchen. You just need to go to furniture store, choose the option that suits your price and taste. In the event that you are not looking for easy ways or space, for example, there is not enough space for a cabinet with a sink, then a decent way out of this situation would be to make a sink with your own hands that matches the area and your needs.

Trapezoidal cabinet with a round sink in the corner of a small kitchen

There are a number of significant advantages to creating a sink cabinet with your own hands.

The opportunity to save money by applying your skills in working with wooden elements, tools and plumbing.
Create a product required sizes, forms, fill with additional shelves on which to place household chemicals, brushes and various necessary small items, and provide space for a trash can under the shelf.
To make a cabinet, use any available material left over from the renovation that you have - wooden blocks, simple or laminated chipboard, ready-made shelves from cabinets, screws, corners.

Design and construction- which is easier to do

When arranging a kitchen set, we have to build on the square footage we have. The arrangement of furniture can be different: in one or two rows, in the letter “G”, in the letter “P”, or have a complex shape that needs to be built to suit the personal configuration of the kitchen.

The arrangement of kitchen furniture directly depends on the location of the stove and sink. When doing it yourself, you also need to pay attention to which shape of the kitchen cabinet for the sink will be easier to make with your own hands. Sinks come in the following forms.

The sink is an important element of the installation

The structure of the niches is of great importance in installing a cabinet under the sink. They are installed in several ways.

DIY sink cabinet: necessary materials and tools

Laminated chipboard is rightfully considered the most popular material for making a sink cabinet with your own hands, since it is less susceptible to moisture.

Chipboard with cladding

If you choose this material, you must prepare a special edge tape in advance to avoid evaporation of the aldehyde resins contained in the chipboard. It is important to understand that their evaporation is harmful to the health of residents.

Chipboard without facing for subsequent painting

An excellent combination of price and quality is MDF board. It is denser than chipboard and the fastenings hold better.

Laminated MDF would be better suited for furniture, due to its properties

Laminated chipboard or MDF coatings can imitate almost any material

Another option is solid wood, but it is more expensive, absorbs moisture and is difficult to maintain.

Solid wood for furniture making

When you decide on the main material, you need to prepare additional components.

Pressed cardboard for the back wall.
Plywood for crossbars.
Facing tape in the color of the cabinet.
Handles, hinges, corners and screws.

To bring your ideas to life, the following tools will help you: .

Pencil, ruler or tape measure.
Drill, screwdriver.
Phillips screwdriver.
Saw or jigsaw.
Internal corners, hinges for doors.

Tools and accessories for assembling a cabinet with your own hands

Manufacturing process: step-by-step instructions

The process of making a cabinet for a sink with your own hands should be divided into several stages.

Preparation. We draw a drawing of the sink cabinet on paper, based on measurements taken on site and your design wishes.
Model of a kitchen cabinet under the sink with the specified dimensions of width, length and height
Manufacturing of parts. Following the drawing data, we cut out the side walls, bottom and doors from plywood. In the case where the sink is countertop, a countertop is not needed. If the sink is mortise, transfer the dimensions to the countertop canvas and cut it out with a jigsaw. The remaining parts of the cabinet are also cut out with a jigsaw, and if you don’t have one, then using a hacksaw for metal will be more correct, since it causes fewer chips. Sand the edges with sandpaper.
Sawing parts for the cabinet of the required sizes

Side walls for sink cabinet
Assembly of frame parts. We start by attaching the walls of the cabinet with crossbars. This can be done in two ways - fastened with internal steel corners or connected with screws, then you need to take thicker plywood. Screw the bottom onto the screws.
Attaching crossbars to prepared side walls

Attaching the lower base by driving screws directly into the fixed crossbars
To fix the top of the cabinet we use the upper crossbars. The back wall will be attached to one of them. We make it thin, out of cardboard, and nail it onto small nails.
Attaching the top crossbars to secure the top of the cabinet under the sink

Fixing the back wall of the cabinet
Installation of facades. We apply and mark the places where the hinges are attached. Drill holes for the hinges and install. Hung doors are adjustable in height. The selection of hinges should be taken seriously, since their wide opening depends on them and whether they will become loose over time.
Assembly of the front frame according to the specified dimensions

Fastening cabinet doors under the sink
Decorate the appearance. If you need to paint, varnish, furniture film, screw in handles. On the inside of the door, attach a convenient pocket for a washcloth or other small items. To increase storage space, make a shelf. It should be easy to remove and put in place. To do this, a deep slot is cut from the wall in the middle, necessary for the passage of the sewer pipe. Place on bars secured with screws to the cabinet walls.
Ready-made kitchen cabinet made of chipboard for an overhead sink

To extend the service life of the product, it should be raised above the floor, placed on legs or wheels, plastic or thick rubber heels.

How to improve the appearance of a chipboard cabinet

Exquisite version of a sink with a cabinet for the kitchen

Having made a sink cabinet from ordinary chipboard, one more step will be added to these steps - transforming the appearance and protecting yourself from harmful fumes.

Apply a thin layer of putty and smooth with a spatula. After this procedure, the surface will become smooth.
After the putty has dried, apply a primer.
Apply tint varnish. We use a brush with natural bristles.

Some people consider wallpaper as a finishing option. Wallpaper should be washed. Glue to the surface using PVA glue. Having made a similar cabinet for a sink in your country house or apartment, you will definitely not be disappointed. You will use your design talent, save money and enjoy further contemplation of the creation of your labors.