Refurbish an old coffee table. How to restore an old table with your own hands: choose the best way. Decorate the table with wallpaper

Buy good furniture, is sometimes difficult. if you have old table, which you don't use because appearance its deteriorated over the years, we will tell you a few simple ways how to restore its former beauty with your own hands, and, perhaps, make it a highlight of your interior.

Before decorating a table in one way or another, you need to inspect it in order to assess its condition, then carry out the necessary repair work with your own hands, and then prepare the surface for decoration.

How to prepare the table surface?

Surface preparation - essential restoration step. It is produced in the following sequence:

Option 1. Coating with paint and varnish

This option great for beginners, it does not require any special knowledge or skills from you.

Sequencing:

A simple do-it-yourself table restoration for beginners is completed.

And since there is a bunch of various technologies for the restoration and alteration of furniture, we will consider other options.

Option 2. Mosaic cladding

If table top in use was scratched, or dents appeared on its surface, you can veneer it with your own hands with a mosaic that will hide all defects and return the table to its former beauty.

Prepare for work:

Repair procedure:

Check if the legs are holding well. If necessary, secure them properly with self-tapping screws.
Degrease the surfaces of the tabletop and legs with alcohol or acetone.
Sand and sand surfaces.
Places that cannot be sanded, putty, and then sand.
Cover all surfaces with a coat of paint. Leave until dry. For work it is better to use paint in an aerosol.
Apply glue in a good layer on the surface of the table.
Mosaic cut and glue mesh down. Press the mosaic and smooth. Postpone work until the adhesive has completely hardened.
Carefully seal the painted edges with adhesive tape and grout the mosaic.
Wipe the surface of the table with a damp sponge.
After a day, wipe the table with a small amount of vegetable oil.

Our table, lined with mosaics with our own hands, is ready.

Option 3. Decorating with a pattern

If the tabletop has no obvious defects, then it is quite possible to get by with decorating the surface with drawings.

We will need:

Work order:

We grind the old surface, sand and putty.
We cover the countertop with base color paint.
Let's draw a picture. You can use a special stencil, apply asymmetrical multi-colored splashes or depict an elaborate ornament. You can make multi-colored stripes by sticking tape in even lines on the countertop and painting over the stripes between the tape.
After the pattern has completely dried, we cover the finished tabletop with varnish and leave to dry.

A table decorated with do-it-yourself drawings can be used for its intended purpose.

Option 4. Wallpaper decoration

One of the most easy, low cost ways restoration of the furniture surface - pasting the table top with wallpaper.

For this you will need:

Procedure:

Degrease the countertop.
We cover the surface with paint and leave to dry.
We measure and cut a sheet of wallpaper to the size of the countertop.
We glue the wallpaper, carefully smoothing it to avoid the appearance of bumps and bubbles.
We bend the ends of the wallpaper under the countertop and glue it.
On top of the wallpaper, if desired, you can apply a frame or some kind of pattern.
We fix the wallpaper along the contour with nails.
Coat the product with varnish and leave to dry.

Decorating the tabletop with wallpaper with your own hands is completed.

Option 5. Decoupage

Decoupage technique is great suitable for restoration old furniture. On sale there is a huge variety of napkins and applications for decoupage. Using this technology, you can decorate not only the table top, but also the sides and even the legs.

Prepare for work:

Decoupage napkins
PVA glue
tassel

If napkins for decoupage you could not find, instead of drawing from them, you can transfer an image from newspapers or magazines to the surface of the table.

Procedure:

Prepare the surface of the table.
We transfer the drawing with glue to the countertop and other surfaces. We are waiting for everything to dry.
We cover the table with varnish.

It remains to wait for complete drying and the design of the table using the decoupage technique is ready.

Option 6. Restoring with varnishing

If your the table is not too damaged by time, however, its appearance is no longer very good, and the varnishing needs to be replaced, you can do this:

A week later, our restored table is ready.

Other ways to restore old tables

Stick a self-adhesive film on the surface of the table.
Cover the countertop with oilcloth, nailing it under the table with a construction stapler.
If the table top cannot be repaired, you can replace it with glass and install a beautiful backlight from below or cover the table surface with ceramic tiles.

As seen from practice table restoration process does not tolerate fuss. A lot of time can pass between the start of work and the receipt of the finished result. But if you approach the matter with all responsibility and thoroughness, your table will turn out no worse than a new one.

We continue our journey into the world of updated things. In the previous issue, they told us their stories, this time there are 8 tables on the stage. And no less interesting transformations that happened to each of them.

They received not only a fresh look, but also new features. And for the "flexibility of character" and willingness to change, the owners gave them a chance for a second youth. Some became just comfortable things, and others - even interior decoration.

Watch the stories 8 tables and tables in "before" and "after" condition, and let your own things take on no less interesting and spectacular "faces"!

If you want, take a look at our new piggy bank of ideas, where 23 models are described in detail.

idea number 1: ancient table-book-> colorful terrace table

A very old thing that has retained, in spite of everything, stability and elegance. lower extremities. Her young owners decided that a little outrageous outfit would not hurt her. Unlike pretty ladies, old things bright colors sometimes very fitting.

But when small children come to visit, they are delighted with such a dining table, which on ordinary days does not take up extra space at all. These are acrylic paints, a stencil and a preliminary sketch on paper.

idea number 2: instead of boring lessons-> exciting hobby

Once upon a time there was a girl, and she considered the preparation of lessons the most boring thing in the world. Therefore, she transferred all her feelings to her school table. And then she grew up and figured out how to get rid of not the most pleasant memories.

The body of the old table was stripped of the worn paint, puttyed and repainted in a stylish wenge color. A furniture film with a zebrano pattern was attached to the fronts of the drawers. And the new bright red funny paw handles are in harmony with the shade of the inside of the drawers, also updated. Happened perfect place for a home hobby: just look at him, and boredom will be blown away by the wind.

idea #3:massive monster -> elegant gentleman

The massive old table survived more than one generation of intellectuals in this family. One of the great-grandfathers of the current owner even owned a successful publishing house. His entrepreneurial spirit was inherited.

The young lady got creative and turned a family heirloom into an elegant item that blends in perfectly with her home. And to complete the experience, she surrounded it with interior details that matched in color. Laconic bronze handles, specially purchased in vintage style - in memory of the origin of the table.

idea #4: sad gray donkey-> flirtatious green crocodile

The gray faceless two-pedestal table has long ceased to please its owners, and they were pondering how to get rid of it. But once a niece-student came to visit, critically examined the "donkey" and a couple of days later brought it to her home, despite the protests of her parents.

Imagine the amazement of the old owners when they saw what happened to the boring subject. His young mistress has created for herself a flirtatious corner for studying and sewing. Juicy green tone matte paint - on the table and old chair from the closet. Plus — a new fluffy upholstery-skin on the seat. And for harmony - flat handles for drawers, covered with printed pink fabric.

By the way, she is thinking about attaching a mirror in the same colors to the wall: it would also turn out to be a dressing table. That's what fantasy is!

Do you want to be in touch with us every day? Welcome to our Planet of Inspiration Vkontakte! Check it out, scroll through! Like? Join and get inspired every day!

Idea #5: The Baroness' Journey from the 18th to the 21st Century

Her new owner acquired an elegant antique little thing at a flea market. The seller assured that Baroness N once owned it. Well, well, - the buyer decided, - then we will rejuvenate the Baroness.

As is known, White color refreshes even a very respectable age. It was chosen as the new color for this antique dressing table. The necessary variety is achieved thanks to the new decoupage tabletop and harmoniously selected items on it.

Idea #6: The Exhausted Magazine Friend-> mobile little thing for children's room

Almost every home once had a similar coffee table. And someone to this day is stored somewhere in the closet or in the country. Why not give him a chance to serve your children too?!

Check how firmly the fasteners for the legs and table top are held. Add bright colors and a stencil pattern - in general, nothing complicated. This table has already "worn" rollers. If yours does not yet have such mobility, then strengthen them too: a young owner will surely like a bright mobile little thing.

idea #7:old card table -> cubby dining on the balcony

Like all previous tables, this card table has been stripped of its old finish and freshly painted. And inside they attached small format ceramic tiles. Now it easily withstands weather fluctuations on an open balcony.

Putting in our 5 cents for this theme: instead of tiles, you can use an inexpensive mosaic - it will look absolutely luxurious. Or - trimming multi-colored tiles left over from the repair: split into small pieces and laid like a mosaic - this is a budget solution.

Important: ordinary tile adhesive (dry in bags) cannot be used, only ready-made viscous, solvent-based (like "dragon").

idea number 8: fresh colors bring summer closer

A metal table resistant to bad weather and wind has honestly served you in the yard for several years, and now, alas, has lost its sight? The same situation happened in this story. And recently, folding chairs with a wooden seat and a back on metal frame. In anticipation of summer, the owners decided to create such a colorful corner that attracts attention. Turquoise paint for metal and the same for wood (for chairs). Plus - update the legs of the entire "kit" with black.

But the most spectacular decoration is a white pattern on the tabletop, applied using a stencil. If you don’t want to suffer with “small art”, you can use ready-made vinyl stickers.

If the table, which has served faithfully for many years, is completely old, do not rush to throw it away. There are many ways to decorate an old table with your own hands and give it a new life. Below is a master class on how to do this.

If the table itself is still strong, but there is simply a loss of appearance, then it can be updated and turned into a real pride of the owners. For today, hand-made is valued more than ever. There are a lot of ways to decorate an old table. These include:

tiling;
painting;
painting on wood;
film wrapping;
decoupage;

Decoupage - a new look from napkins

You can update the table using decoupage without even having special skills. You can learn how to work in this technique with your own hands by studying any master class.

materials

For work you will need:

pictures for decoupage - you can replace them with ordinary napkins with your favorite pictures and even images from magazines;
acrylic varnish - it is best to buy varnish in a spray can;
PVA glue;
tassel;
napkin.

Instruction

Progress:

Clean the table from old layers, paint, dirt. Degrease the surface of the table by wiping it with a cloth with alcohol. If the surface is not completely cleaned, then the decoupage will turn out sloppy.

Pick up pictures and make a composition out of them. Any pictures will do. kitchen table you can choose motifs of fruits and vegetables, different colors. A handmade table with motifs of ancient buildings will look very original.

Important : if special pictures for decoupage are used, then you don’t need to do anything with them - just stick them. If the pictures are cut from a napkin, then two-layer napkins must be divided into layers. If the picture is cut out of a magazine, then its bottom layer must be removed by wetting the picture and removing the layer with your own hands. Then the restoration of the table will be more accurate.

Arrange the cut out pictures on the table. Mix PVA glue with water in a ratio of 1: 1 and stick the pictures to the table in the selected places. To avoid the formation of bubbles, iron the pictures with a napkin, expelling excess bubbles. Next, the pictures should dry.

After the decoupage dries, the surface of the table with pictures must be varnished. Varnish for decoupage is applied in several steps. Each coat of varnish should dry well. The better this operation is carried out, the more resistant the table surface will be to moisture. Do-it-yourself decoupage is ready - such a restoration will be inexpensive, and the table will look very stylish. If decoupage is done carefully, then such a table can become a real decoration of the house.

We paint the surface

The surface of the old kitchen table can be painted with paints. Such a restoration is more suitable for an old wooden table. Painting does not always require special artistic skills and talents. detailed wizard the class will show that even a beginner in this business can do it.

materials

For work you will need:

paints - best acrylic, resistant to sun and water;
brushes;
stencils;
foam sponge;

Stages of work

Restoration begins with cleaning the surface of the table. If necessary, it must be sanded. Next, the surface is washed and degreased.

Drawings for painting can be found on the Internet or made by yourself. The master class advises to print the drawing and make a stencil out of it, carefully cutting out the contours of the elements with a clerical knife. When making a stencil, one must not forget to leave jumpers between paper elements. Then drawing will be easy. If you want to update the table, but there is no data for drawing or you don’t want to make a stencil, you can buy ready-made stencils in stores finishing materials or art supplies.

You can update the table by applying a pattern in the form of a border around the edges or by making a complex composition of individual elements scattered across the surface of the table.

Further, the restoration of the table includes the application of paint on a stencil. There are subtleties here. So that the stencil does not move during operation, it is better to glue it around the perimeter with masking tape. You need to take a little paint on the brush, otherwise the paint will spread and penetrate under the stencil, ruining the drawing.

Important : Instead of a brush, a sponge is often used, on which paint is drawn. The pattern applied with a sponge looks more even and uniform. Paint with this method of application practically does not flow and the risk of spoiling the work is minimal.

After the painting dries, the surface of the table is varnished. Lacquer is applied in several layers - it protects the painting from water and makes the surface more durable. The restoration of the table with your own hands is over.

Paint and only paint

You can update the table quite simply - by painting it entirely. To do this, select:

acrylic paints;
alkyd paints;
epoxy paints.

All of them are resistant to water and do not require additional protection lacquered surfaces.

Important : if the surface of the table is large, then it is best to paint it with a roller. This will give a uniform, even, "factory" surface. Such a restoration will be almost invisible to outsiders.

Self-adhesive film - the laziest way

Paint can be replaced with self-adhesive film. Today there is a large number of film colors, so you can make any design of the table.

Before pasting the table, the surface must be thoroughly cleaned, rinsed and degreased. Next, the film is carefully glued to the surface and leveled - care must be taken not to form bubbles. This completes the restoration.

Tile decoration

You can update the table with your own hands if you decorate it with tiles. To do this, you can choose:

ceramic tiles;
mosaic tiles;
tiles made of composite plastic materials.

Important : It is convenient to work with tiles in the form of a mosaic. Such tiles are easy to cut with a knife, cutting off excess parts.

Restoration begins with cleaning and degreasing the surface. Then, using a special adhesive, the tile is glued to the surface. After a few hours, you can rub the joints between the tiles with grout or special joint paint. A master class on this topic can be viewed on the Internet.

How to decorate the kitchen table with your own hands (video)

Updating the table yourself is not difficult at all. To do this, you just need to apply a little imagination and patience.

Many people have old dining or kitchen tables left at home, they are usually polished or wooden and have a completely out of fashion look. Do you want to throw it away? Not worth it! Why spend on new table, the more old tables are much better than modern ones and can last for many more years

In this article, we will show 4 universal ways to update the old dinner table with your own hands, without spending much on the family budget!

The main methods of restaurant work include the following:

Table painting (usually a special paint is used for wooden surfaces, it can be both acrylic-based and enameled)
Countertop replacement (the table top can be ordered ready-to-size, or you can make it yourself, as shown in the master classes below)

They can be used singly or combined depending on the damage and condition of your furniture.

Refurbishing the kitchen countertop

Look at your dining table. If it general state more or less satisfies you with its appearance, but the countertop is completely worn out or the countertop simply cannot be removed without damaging the entire structure, this master class is definitely for you.

Materials:

White enamel paint for wood;
Deglosser;
Polyurethane varnish on water based matte (you can use glossy at your discretion);
boards;
Liquid Nails;
Putty for wood;
Fine sandpaper;
Brush, cloth, water.

Restoration instructions

Step 1: Remove old paint

Treat the table legs with a deglosser.
Thanks to this tool, you do not need to sand and tear off the old paint, but simply apply it on top, wait for it to dry and paint it in the desired color.
Apply 3 layers of enamel paint and wait for it to dry completely.

Step 2

Turn the table upside down. If you removed the legs for painting, then it will be more convenient for you to paint the bottom of the tabletop and the side wooden fasteners.
Apply the deglosser and paint in the same way as you would on the legs.

After drying, turn the table back and paint the table top around the edges, capturing 10 centimeters, it is not necessary to paint over the whole.

Step 3: Laying out a new countertop from the boards

After complete drying, measure the dimensions of the countertop, its length and width. Boards should be slightly larger in size, centimeters 5 more than the future base e - tabletop.
Take liquid nails and spread them evenly across the middle of the table. Then start from the number of boards you have.
If there is an even number of them, for example, 6, then they must join right in the middle. In the case of an odd number, it is the unpaired board that you should put in the middle. Again, see how it will be better, based on the dimensions of your particular table and boards.

After gluing the middle, glue the remaining boards on the sides. Leave the table to dry for 12 hours or a day, depending on the glue.

Step 4: Putty

Be sure to fill the gaps between the boards with wood putty, otherwise pieces of food will get stuck in them.
You can smooth it out with your finger, and wipe off excess with a damp cloth.

TIP: Let the putty dry for a couple of hours, and then sand all the boards with a thin sandpaper.

Step 5: Polishing

Wipe the boards well, leaving no dust or debris on them. Take the polyurethane varnish, stir it and start applying it on the boards with long strokes. Try to make the first layer thin.
Leave the countertop to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.

Step 6: Whitewash

As soon as the varnish dries after the last painting, start preparing the paint. In this case, the effect of whitewashing is planned, to achieve it, mix 1 part paint with 4 parts water.

Paint over a section of the board with a brush, and then immediately wipe it with a cloth. Paint the entire countertop like this, then add some more water to the paint and go over again.

After complete drying, the table is ready for use.

How to update a polished table

If you have a small polished table gathering dust in the corner for a thousand years, which it is high time to send to a landfill, but your hand does not rise, then you should pick up magic tools and become a fairy godmother for it.

Materials and tools:

Sander;
Sandpaper;
stain;
Paint removal gel;
Plastic scraper;
Brush;
Water-based polyurethane varnish;
Dark enamel paint;
Drawer handles.

Work order

Step 1: Remove old varnish

Dress in closed clothes and shoes. If the legs are removable, separate them from the tabletop for ease of sanding.
Sand all parts of the table well, getting rid of all dents and scratches.
Small parts, as well as places where the table can be damaged, grind with sandpaper.

Step 2: Apply stain

Apply your favorite stain to the prepared parts of the table, following the instructions. Depending on the selected stain, wait for the drying time.

Step 3: Processing the Table Shelf

To clean the shelf of the table, use the gel to remove the paint.
After applying it, wait 4 minutes (depending on the gel) and carefully, with a plastic scraper, clean the shelf, trying not to scrape the wood.
Then apply stain.

Step 4: Varnish the surface

Wipe all parts of the table well, without leaving dust and debris on them. Take a polyurethane varnish, stir it up and start applying with long strokes.
Try to make the first layer thin.. Leave everything to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
You can, after drying, apply a third layer, but no more.

Step 5: Painting the Table

Paint the table in the color of your choice, wait for it to dry, and assemble it.
Screw the knobs into the drawer.

Agree that the result of the work done is impressive!

How to paint a wooden table white

One of the evenings, you realized, looking around, that you were among monotonous gloomy things? Want to freshen up your room and don't know where to start? White wooden furniture always looks very impressive and expands the space.

You can make a white table from absolutely any color. In this master class, we will show how to paint a black table into white.

Prepare the following:

Means for removing paint and varnish products;
Degreaser;
Plastic scraper;
Fine sandpaper;
Brush;
Polyurethane varnish;
Enamel paint.

Work order:

Step 1: Remove old paint

Need to be removed old layer varnish from the tables. To do this, use a paint remover. To protect yourself from harmful chemicals, wear protective gloves, a mask and goggles.
Apply the product to the areas where the paint was removed. Depending on the instructions, wait the indicated time and begin to carefully remove the layer of paint, being careful not to scrape the wood.
After removing all the paint, degrease the surface with a special solution.

Step 2: Sand and varnish

Pass sandpaper over the entire surface of the tables. Then wipe them well from dust.
Take polyurethane varnish, stir it and start applying with long strokes. Try to make the first layer thin.
Leave everything to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.

Step 3: Painting the table

Wait for the varnish to dry completely and start applying the paint. Paint in 3 layers and leave to dry for a day. After that, you can arrange tables and please the eye with a new thing.

Loft style wooden dining table

Now very fashionable tabletops made of wood with legs in a contrasting color. Such tables came to us from the Loft style - it is distinguished by its simplicity and a little rudeness. But such wooden tables really fit any interior.

We are watching a master class on how to make a stylish Loft out of an old table.

Tools:

Saw;
boards;
Polyurethane varnish;
Brush;
Enamel paint;
Liquid Nails;

Mounting technology

Step 1: Cut out the boards

Measure the dimensions of the countertop, its length and width. Boards should be slightly larger in size, 5 centimeters higher than the future base - countertop

Cover prepared boards polyurethane varnish. To do this, stir it and start applying with long strokes. Try to make the first layer thin.
Leave the boards to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
After the varnish has dried, paint the boards with enamel paint in 2 layers and leave to dry for 12 hours.

Step 2: Installing the countertop

Prepare an old countertop by sprinkling some sand on it and wiping it down with a cloth.
Once the paint is dry, apply liquid nails to the old countertop and start gluing the painted boards to it.
To make the boards stick well, put a load on the countertop and leave it for a day.

The end result is a great little loft-style dining table!

You can refresh the interior, even slightly updating old thing. It is not worth spending huge money on buying a new dining room or coffee table when if the opportunity to do everything with your own hands. By adding a little imagination, you can decorate the table simply amazing with the help of stencils.

And if you are at the company with a table , then you will plunge your guests into envy - after all, you will have an original, unique collection of furniture that can even be called designer if you try and decorate it. Create to surprise!

Everyone dreamed at least once in their life to discover artistic talent and try themselves as a restorer or decorator. Table restoration is a unique opportunity to combine business with pleasure. First, this good way to save money on buying new furniture, and secondly, to restore the old table with your own hands is doubly pleasant. It is noteworthy that the restoration technology is available to everyone, even non-professionals. The result is an exclusive product, which has no analogues. How to restore and transform an old kitchen table? How to cover wooden tabletop? Tips, recommendations, photos, as well as a unique new restoration master class from designers will help you make real masterpiece from an outdated piece of furniture.

Restoration of furniture - in itself is very fascinating process, and with a competent approach, it is also very useful, allowing you to significantly save on the purchase of new furniture

Update methods

How to update the countertop in the kitchen with your own hands? What are the wood countertops in the kitchen covered with? Beginners have many questions and, as a result, difficulties in the restoration process, which plunge them into a stupor. Of course, any alteration and restoration of kitchen furniture may not lead to the result that was originally planned. However, here it should be remembered that it is never too late to get rid of the old table and buy a new one, but it is still worth a try.

You can do the restoration of the kitchen table with your own hands or update it in the following ways.

Painting through tulle involves painting the product with paint according to the principle of a stencil. To do this, the fabric is spread on the table in such a way that there are no tubercles. Next, you need to use spray paint paint over the entire surface and let it dry, then remove the tulle. As a result, a beautiful lace pattern is formed on the table.
Alteration of the table may consist in restoration with the help of ceramic tiles. Such a coating is not only attractive, but also practical, as it withstands various kinds of impacts. It can be whole blocks or multi-colored fragments in the form of a mosaic. If there is no tile, glass fragments can be used as a material for restoration.
You can update the old table with self-adhesive film. Modern manufacturers offer inexpensive models with original drawings. For restoration, it is enough to glue the surface of the product - and it will change before our eyes.
If the table is made of solid wood, you can use the burning technique as an idea for restoration, but this requires certain work skills, as well as special equipment in the form of an electric burner.
Decoupage is a very fashionable way to transform furniture and give it a completely different look. This does not require special artistic skills, because the basis is taken finished photos on paper or napkin, which are attached to the table.

Product restoration

Restoration of the countertop involves returning to its original appearance without visible changes in the design. Many private masters and firms offer their restoration services, but due to the high cost, this option is not available to everyone. The restoration process is long and painstaking, however, if you wish, you can update the kitchen table with your own hands at home. Before you repair the countertop, you need to prepare the following materials:

goggles, respirator, gloves;
grinder or sandpaper of coarse and fine grain;
artistic or paint brush, roller;
impregnation and putty for wood;
wood glue, liquid nails;
acrylic or alkyd paint, stain, countertop varnish or wax;
antiseptic and primer.

When necessary tools at hand, you can get to work.

preliminary repair

Before covering the wooden tabletop, you should pay attention to the underframe and the general condition of the table: are the legs loosened, are some parts missing. New life the old table begins primarily with the elimination of these defects, since the functional component is important for any furniture. It must be disassembled, the old coating removed from each part, sanded and assembled back, fixed with glue or liquid nails. Many restorers insist that the integrity of the table should not be violated, as it will quickly become unusable.

Here each case is individual. For flimsy designs, assembly can really be fatal. The puncher may destroy the surface or it may be chipped. If the furniture is solid and massive, then you should not be afraid of this. At correct assembly the product will become stronger and more stable. After work, it is important to ventilate the room, as the accumulated dust can later settle on the countertop of the kitchen table. Dust adhering to the surface after painting will spoil the appearance, so spring-cleaning not prevent.

Primary processing

A wooden table, like chipboard countertops, needs to be impregnated with an antiseptic, which will protect against pests and fungi. This substance will not allow woodworms to attack the product in the future. After processing, the table is recommended to be left to dry for at least a day. Next, you need to remove the old coating with grinder. You can also use coarse-grained sandpaper at the beginning and fine-grained sandpaper at the end of grinding.

Kitchen worktop restoration

Before covering a wooden countertop, you should carefully inspect the surface for damage and chips. Small cracks up to 3 mm are sealed with putty, and then polished again so that there are no tubercles. Large chips can be repaired with veneer. It is necessary to pre-make a stencil right size. In order to make it correctly, you should cover the surface of the chipped part of the table with paint, then press it with paper. A clean, unpainted spot is the necessary stencil. Next, you need to cut the veneer along the contour and glue it to the surface with wood glue. Pressing the part tightly, leave to dry for 10-12 hours. How to cover the countertop after cosmetic repairs? Alkyd or shellac primer for wood. This will ensure even paint coverage. The primer should be applied in 2 coats and allowed to dry completely after each treatment. After that, the surface can be sanded again.

Table painting

Now you can proceed directly to painting. Since the restoration requires the restoration of the original appearance, you should choose the right shade. Modern manufacturers offer a wide range color palette, but it is not always possible to find an absolutely identical version that was used before restoration. You can purchase several types of paints, mix them and come to the desired color. How to cover a wooden tabletop so that it lasts for many more years? There are a lot of options here, but the most common is water-dispersion acrylic paint. It is non-toxic, dries quickly and is quite moisture resistant.

Using a brush, apply a thin layer, leave to dry, then cover with a second one - and also allow to dry. For dark shades, it is recommended to repeat the procedure three times. If the table will stand on the street, care must be taken to protect the surface from moisture and precipitation. This is where alkyd paint comes in handy. Despite the pungent toxic smell, it is successfully used for exterior finish. It is moisture resistant and is not afraid of being hit by direct sun rays. Most a budget option – Oil paint oil based. This material is suitable for the restoration of countertops coffee tables that are not actively exposed to mechanical stress. Please note that after dyeing, the product will be ready for further processing after 3-4 days.

Protective covering

How to cover wooden countertops in the kitchen for long-term use? Best with matte water-based polyurethane varnish. He will provide reliable protection from external influences and damage. The varnish is applied in 2-3 layers in one direction, after each it is necessary to dry the surface for 4 hours and sand it. How to varnish a countertop so that there are no waves? It is necessary to wait for complete drying, and clean the small points with sandpaper. A white spot may form at the cleaning site, but this should not be scared, because after polishing the surface will become perfectly smooth.

Polish should be selected according to characteristics similar to the previous varnish. After the procedure, you can cover the countertop with wax. These are special wax sheets with a pleasant natural aroma. Before work, it should be softened (you can warm it up a little or leave it in the sun), and then rub it in in a circular motion with felt. This process is long and painstaking, but it should be given Special attention, since it depends on the quality of the coating further term operation and presentable appearance of the product.

There is another option than to cover a wooden tabletop - this is ordinary wax, which is rubbed into the surface with a cotton cloth. Such a polished table looks very stylish and sophisticated, but is more suitable for the living room than for the kitchen.

This is how the long process of restoration is carried out. A little patience, diligence and a creative creative approach - and the old piece of furniture will look like in a photo from a glamorous magazine.