How to assemble a shoe cabinet. In our electronic catalog - Do-it-yourself shoe rack from leading Italian manufacturers

The shoe rack in the hallway is very useful device for storing shoes. It will be especially relevant in a large family, where shoes that are in constant use take up a lot of space. On such shelves, you can easily organize everything, up to seasonal use. In addition, the shoe rack has all the conditions for storing shoes, which significantly increases its service life. In our article, we will analyze what types of shoe racks are, their advantages and disadvantages, and also tell you how to make such shelves and cabinets at home using the most common materials.

To date, there are a lot of options for this furniture, but they all belong to two main categories. Based on this, shoe racks can be:

open type;
closed type.

It can be all kinds of shelves, cabinets, benches, both compact and full-sized. With a combination of certain characteristics, several types of such products can be distinguished:

shoe cabinets- these are open-type shelves, the design of which can be both the simplest and the most elaborate. Their height can also vary from the desire of the owner of the apartment. The advantage of such products is the ability to install shoes different sizes. Shoes after the street, wet or dry, can be freely installed on such shelves, thanks to open type it will be ventilated, which will ensure its drying. The disadvantage of such products can be called open view shelves, which does not always look aesthetically pleasing;
cabinet-bona- This is a bulky design, inside of which there are several shelves for placing shoes. Such shelves can be located both at right angles and at an angle, depending on the desire of the owner of such furniture. Shoe deformation is excluded, since all shoes rest completely on the entire sole. The dimensions of such a cabinet allow you to place all the available shoes in the house, arranging them according to the seasons. The doors of such a cabinet can be made of frosted or transparent glass, and the door design itself can be hinged, sliding or accordion. The advantage of such a product is the placement a large number shoes, and the disadvantages include large dimensions, which are unlikely to fit into a narrow hallway;
slim shoe rack This is a product that takes up little space. They are not too deep, but they have folding shelves that can be opened to 45 or 90 degrees. The advantage of such products is the possibility of installation in small hallways, especially since they can accommodate a lot of shoes. Their disadvantage is the inability to store large and high shoes. Although, now manufacturers are working on this issue, and are starting to produce products with different compartments;
cupboard- This is a low product with hinged doors, which is ideal for storing seasonal shoes of various heights. The advantages of such a cabinet include
the functionality of the closet, in addition to shoes, there can also fit a product for caring for it. In addition, such cabinets are often equipped with a seat that helps to put on shoes. The disadvantages include the fact that shoes for storage must be dried;
the shoe rack can also be installed in the closet if nothing else can be put in the hallway besides him. Shelves in this case can be of various sizes, stationary or retractable, on which you can place all the shoes, or only for the season. The advantage of this solution is the saving of free space;
shops- these are products that are a symbiosis of bedside tables and shoe cabinets. All shoes are located on open shelves, but the product itself is equipped with a seat for convenience. The advantage of this solution can be called ease of use and simplicity of design, which can be made by hand. The design of such products can be the most diverse, so you can install such a bench to decorate the hallway.

The choice of material for shoes

From how correctly the material for the manufacture of shoe racks is selected, its service life and convenience will depend. To date, in stores you can find various models of these products, and they are all made of various materials. The most popular models are made of wood, plastic and glass, but there are other options:

wooden, their advantage is environmental friendliness and beautiful appearance. Wood has always been considered an expensive material that is ideal for making any furniture. Such shoe racks will look perfect in hallways decorated in classical style. Despite their advantages, they also have disadvantages. They are very demanding for care, in order for the product to please the eye for a long time, it is necessary to use various wood impregnations. Shoes that will be placed on such shelves must be perfectly clean so as not to spoil the product;
plastic products are considered the most affordable, this is their undoubted advantage. But the look is not the same. long term operation can be a big disadvantage. Some types of plastic used for the manufacture of shoe racks are fragile, so cracks and chips cannot be avoided;
hardware, more durable and reliable, which is a huge plus. Their only disadvantage is the need for treatment with special compounds with anti-corrosion properties. If for the manufacture of such shoes was used thin metal, then under the weight of the shoe, it can bend;
glass products have several advantages: they are very durable, as they are made of special glass, they have a sophisticated appearance, but there are also several disadvantages. Firstly, such a design is very heavy and massive, and secondly, various kinds of prints are very noticeable on the glass, which are very difficult to remove. Therefore, you will have to choose between the aesthetic side or the practical side;
Chipboard the most popular material for shoe racks that are designed at home. Him affordable price that opens wide opportunities. In addition, products made from it have the following qualities: they are very compact and light, undemanding to care for. The only negative is poor resistance to moisture, which can cause the material to crack or swell;
wicker products are distinguished by their beauty and attractiveness. These are the most sophisticated shoe options that fit perfectly into almost all hallway interiors. But the most important advantage of such products is that the shoes installed in them are ventilated.

These are not all the options that can be found on the Internet, the authors' fantasies are endless, so you can even see stone products installed in large country houses. Whatever product you decorate the hallway, it the main task to accommodate the shoes of all family members, so you need to carefully consider the choice and, if necessary, make a shoe rack yourself.

Do-it-yourself plywood shoe rack

There are many options for making shoe racks at home. Their design can be the most ordinary, or with the addition of frilly elements, but the main thing that should be present in any product is a roomy space with shelves where you can conveniently place your shoes.

The first version of the shoe rack that we will consider will be a plywood model. Everything you need for this job will be listed below:

plywood;
shoe brushes;
self-tapping screws;
spikes;
acrylic paint;
building glue;
brush;
dowels.

The design of such shelves can be anything, so you can experiment with both acrylic and gouache. Shoe brushes will be needed as shoe holders.

Making shelves for shoes consists of several steps:

Other options for making shoes can be viewed in the video below:

Wooden shoe rack

If you take wooden boards as a manufacturing material, you can make a sufficiently strong and robust design. The thickness of the board should be approximately 1.5 cm.

To work, you need to prepare a standard set of tools:

Work begins with the preparation of the rear and side parts of the structure. In most cases, the height of the shoe rack can be any, it all depends on your desire and capabilities. If it is supposed to place several shelves there, then the height should correspond to the fact that a pair of shoes can fit on each level. The width of the shoe is in most cases standard, 23 cm, but this does not mean that you cannot increase it if necessary.

You can attach a key holder to the shoe rack so that the keys are always in sight.

Now you can take up the manufacture of shelves. Their number depends on your needs, and the width is calculated based on the dimensions of the main product. If the width of the shoe is 23 cm, then the width of the shelves is 20 cm.

After preparing all the parts, you can start assembling them:

First, the attachment points on all parts are marked and holes are drilled through them;
First, the side parts of the shoe are fastened, then its back part is attached with nails;
It remains to install a shelf or shelves and the shoe rack is ready.

Shoe racks in the hallway - this is a fairly necessary product used to store shoes. Firstly, you will keep your shoes clean, which will significantly extend their service life, secondly, you will avoid clutter in the hallway, and thirdly, you will not have to shift unnecessary pairs of shoes from place to place every day, choosing what wear to work today. Thanks to design developments, you can get ideas for making your own shelves or cabinets, or purchase a ready-made model for storing shoes.

Even a small amount of untidy shoes in the hallway creates a feeling of untidiness and disorder. But what if the family is large and there are a lot of shoes? What if the corridor is too narrow? In such a situation, capacious and light-weight shelves for shoes will save. With their help, you can compactly place all sandals, shoes, boots and boots, saving space in the lobby. We offer to organize free space in the hallway and make a roomy shoe rack. Moreover, a do-it-yourself shoe rack is a great opportunity to show off your knowledge and carpentry skills, because its design is extremely simple.

Another positive point in favor of making your own shoe stand is the availability of materials from which you can make it. In addition, if you use the available tools and materials for its manufacture, you can significantly save the family budget.

Wooden shoe rack in the hallway - no one canceled the tradition

The tree is the most common and available material to create any homemade furniture, this also applies to shelves for shoes. There are options for making shelves from chipboard or MDF, from boards or furniture panels. You can get a budget shelf if you make it out of plywood with your own hands. Stop your choice on quality plywood from birch.

Except suitable material you need a standard set for carpentry tools:

hacksaw or jigsaw;
sandpaper or grinder;
drill;
screws and metal corners for fastening the structure or furniture ties;
special protective equipment for the processing of wooden products.

The first thing you need to think about is the drawings and diagrams of the shelf or rack you like. You can draw them yourself or find suitable ones on the Internet and fit them to your size.

So, to create a shelf for shoes made of wood, everything is prepared, you can get to work.

Shoes underfoot in the hallway create inconvenience and clutter up the space. Buying a special shelf or even a locker is expensive for many and why, if you can create not only a functional structure from improvised materials in the house and garage, but also emphasize the design of the hallway. For assembly, we will use both familiar wood materials and non-standard ones - PVC pipes, pallets and even cardboard.

Depending on what shoes you store in the hallway, the diameter of the pipes will depend. Let's start with more simple option, which is suitable for storing demi-season, summer, children's, as well as home shoes. We use as a basis sewer PVC pipes with a diameter of 110 mm. This is quite enough to accommodate shoes up to size 42. For larger shoes, we recommend using pipes with a diameter of 160 or 200 mm. Additionally, for shoes, you will need a hacksaw, a tie belt, an aerosol can of paint. The order of work is as follows:

1. Sawing off desired length pipes with a hacksaw. We recommend 30 cm, but you can make the length shorter or longer, everything will depend on the size of the shoes. One such pipe is a cell for one or a pair of shoes. We make as many of these cells as you need to accommodate the entire collection.
2. We grind the sharp edges formed after the cut sandpaper
3. To better match the shelf with the interior, paint it in the selected color. More convenient to work with spray paint but you can use other materials
4. We expose the pipes with a pyramid and tighten them with a belt.
5. Insert shoes into each cell and enjoy the result.

Pipes for such a shelf are best fastened with liquid nails

But if you need a more voluminous shelf for shoes in the hallway, we buy sewer PVC pipes with a diameter of 300 mm. It will certainly fit not only shoes and sneakers, but also long boots. We divide the selected pipe into equal sections with a hacksaw and also clean the sharp edges with sandpaper. For decorating compartments, we suggest using paper wallpaper or self-adhesive vinyl film. Decorate not only the outside, but also inner part so that the shelf has a complete look. Insulating or fabric tape of a suitable size will help to hide the joints formed at the edges. Next, we fasten the workpieces together using hot glue or bolt fastening. The number of sections in each row is up to you. They can be the same, presented in the form of a pyramid or honeycombs, your imagination is already working here.

Classic wood shelving

Wooden shoe storage shelf is simple and convenient option. Due to the fact that the tree lends itself well to processing, it is easy to work with it. To achieve the desired shape and size, you will need a planer, Sander, saw, hammer, a set of screwdrivers, as well as a pencil and tape measure for marking. To create shelves, we prepare in advance: wooden blocks and strips, self-tapping screws, varnish for opening.

We saw off six equal bars 33 cm long. These will be the sidewalls of the structure, 2 for each shelf. Their length is the depth of the rack, which is enough to comfortably put an adult pair of shoes. On the sides of the sidewalls with a planer we make cuts corresponding to the depth of the long bars on which the shoes will stand. For each shelf, we suggest providing 4 transverse beams about 62 cm long, so that several pairs of shoes can comfortably fit on one tier. We insert long bars into the recesses of the sidewalls and fasten them together with self-tapping screws. We do the same procedure with the rest of the shelves, you choose their number yourself. Sharp edges are sanded with sandpaper.

The optimal distance between each shelf should be at least 25 cm, so that you have the opportunity to place not only short shoes, but also long boots. In our case, the total height of the structure will be a little more than 80 cm, it will consist of three shelves. To connect the shelves, we use wooden planks, we also make cuts in them to the depth of the beam every 25 cm.

In our case, we make the lower cuts at a distance of 25 cm from each other, and the last one after 33 cm. Thus, after connecting the shelves, the upper part of the structure will protrude literally by 7 cm, this is enough. We overlap the upper side planks with a transverse bar, making a side. We grind sharp edges with a machine or sandpaper, open the structure with varnish in several layers. The shoe rack is ready. With your own hands you, where at least three pairs of shoes will fit on one shelf.

In order to make this unusual shelf, you will need plywood and shoe brushes, you can use the old Soviet type. First, let's decide on the dimensions of the upper part. We measure the dimensions of the future shelf. The length of the structure will depend on the number of brushes. We make the depth of the shelf 5 cm more than the width of the brush. We decided on the dimensions, now we cut out two absolutely identical blanks and connect them together with a "book", we get an angle of 90 °. To connect the parts, we step back from the edge of the bottom of the shelf 1 cm and connect both ends with a screw. We do the same with the second side. Next, we cut out two identical squares of plywood, the sides of which correspond to the width of the shelf, and fix them on both sides, closing the corner.

Let's get brushes. If they are with handles, cut them off with a hacksaw, smooth out the rough edges with a file. We drill two holes on each side in each brush, with the help of screws we fasten them to the bottom of the shelf in one or more rows - it all depends on the quantity. The first part of the design is ready, set it aside.

If the brushes have handles, they must be sawn off.

Take another sheet of plywood. It should be equal to the length of the first part, and its width should correspond to the largest shoe size. On average, you will get 35–40 cm, which corresponds to a size 43–44. To make the lower side, we cut out another plank of plywood, equal to the total length and width of 15 cm. We fix both parts at 90 °, connecting the ends according to the same principle as in the first part of the structure. We get a side for shoes.

Now we connect the first and second blanks together with screws, paying attention Special attention at the corners. We paint, and when the paint dries, we make two side holes in the back panel for mounting on the wall. Such a shoe rack will fit into any hallway and will not take up much space. Thanks to the brush holders, the shoes will not fall over.

This shoe rack is more difficult. To make it with your own hands, you will need certain carpenter skills, additional tools and materials that may not be in the arsenal. Let's analyze two options for a round rotating whatnot with shelves - ordinary and with soft pouf for sitting.

Using a jigsaw, we create circles from wooden plates and mark the sections

For the first option, we are preparing wooden plate 12 mm thick and cut it into three equal squares of 70 cm each. These will be the bases for the shelves. If you want to make the bookcase taller, cut out more blanks. We turn the square shape of the cut plate into a circle with a radius of 35 cm using electric jigsaw. We cut the plate into equal boards - these are the walls of the sector, each of which will have a pair of shoes. Moreover, they should not be the same in height in each tier. For example, for the lower shelf, they can be made higher, sections for high boots, and the upper ones can be made symmetrical for shoes and sneakers. To make the sectors even, with the help of a protractor we mark angles of 60 °, with a ruler we make markings on both sides of the circle. On each line of the sector we nail nails until we bring them to the stop. We apply liquid nails to the marking and fasten the plank, finally fix it with reverse side iron nails. So we do with the rest of the shelves.

Doing wooden frame to raise the whatnot above ground level, we connect it to the bottom shelf. Next, paint all the elements in your favorite color, after sanding the edges. We recommend using white paint, and for contrast, make a black border. In order for each shelf to rotate freely, we install turntables between the tiers, fix them strictly in the center, having previously drilled a hole for the bolt and nut.

The final step will be the coloring of the shelf

The second option is a rotating shoe rack with a soft seat. General principle its assembly is unchanged. However, instead of three or more tiers, we recommend making two, adjusting comfortable height for sitting. Also, instead of the frame base, you can attach wheels so that the shelf also becomes mobile. We make the upper part of the bookcase soft. We use batting as a base. We cut out two circles from the filler corresponding to the diameter of the shelf, and two more smaller ones, by about 7-10 cm. When laying the batting, we get a ledge. It's upholstery time. We cut the fabric along the diameter of the circle with a margin of at least 5 cm. We fix it around the entire perimeter with construction stapler. You will learn more about how far to fasten the staples and how to select upholstery material in the article about. We cut off the excess fabric, and to hide the staples, we frame the outline with upholstery tape.

Shelves made of cardboard for shoes, however, like the rest cardboard furniture are gaining more and more popularity in interior design. As a basis, ordinary cardboard boxes are used, which, perhaps, everyone can find in the house. If you don’t have them, think about the nearest store or warehouse where such boxes are lying around idle. Apart from corrugated cardboard for work you will need colored wide adhesive tape, scissors, a ruler and a glue gun, if it is not there, you can use ordinary PVA.

Cardboard rectangles are folded into triangles along the folds

We prepare cardboard by cutting out a rectangle with sides of 45 × 35 cm. This size will be optimal for both small and big couple shoes. We measure with a ruler 15 cm from each edge and make folds. The sides that we will bend in a triangle are pasted over with colored tape, this will be the central part of the stand. We fold the cardboard along the folds in a triangle, fix it along the edges and center with colored tape. We repeat the same manipulations with all other sections - we choose their number at your discretion. After you make all the sections according to the plan, we proceed to collect the cardboard shelf. We fasten the bottom row of triangles together with colored tape, for reliability we go through the joints with a glue gun. We do the same with the rest of the rows, we fasten them together. At the end of the work, you will get a shoe stand made of triangles. We store shoes in through sections.

Attention, in order for the design to serve you for a long time, shoes should always be dry and clean.

Another budget invention made of cardboard is vertical shelves for shoes. It is easy to make such a design with your own hands. It is ideal for storing slippers, shoes, sneakers and summer shoes in the hallway, does not take up much space. For work, you will need a sheet of cardboard 70 × 60 cm.

We retreat along the length of the cardboard from the edges by 2.5 cm. From these points we measure a vertical line of 25 cm and draw a horizontal segment 20 cm long. We connect the sides, we get a rectangle 25 × 20 cm. A square 25 × 25 cm is formed between the two rectangles. we retreat 11 cm from the upper corners of the square. We draw diagonals to the lower corners of the square and we get two triangles on both sides. We draw a rectangle with sides 35 × 25 cm from the square down. As a result, you should get a T-shaped blank, where the protrusions are two equal rectangles with sides 25 × 20 cm, and the central part is a square 25 × 20 cm and a rectangle 35 × 25 see. We cut off everything superfluous.

To work, you need a large sheet of cardboard

Now we bend the cardboard along the lines, first vertical in the center, and then diagonal. In order not to damage the material, we use a ruler for even bending. After that, we lift the lower rectangle (35 × 25 cm), then the T-shaped top and wrap the diagonal bends for the base on both sides. In the toga, you should get a pocket with triangular ribs on the sides. We fix the bends on the back of the base with ordinary cardboard glue. For reliability, we recommend a glue gun. We make several such shelves-pockets, after which we connect them together by the upper ledge with the same glue. The number of sections is up to you. At will, the shelves can be decorated, painted and upholstered with twine, glued with self-adhesive film. At the end, we make a hole in the last section, hang a vertical shelf on the wall.

Simple shelves from boxes and pallets

You can make a shelf for shoes from boxes that are also found on the farm. For their construction, you will not need to additionally purchase complex parts and tools. If you are the owner of mesh boxes, we fasten them together in a vertical position with a clamp or strong wire. The front of the shelf remains open, put the shoes. We choose the number of tiers ourselves, it all depends on the size and depth of the boxes.

The same can be done with wooden boxes. To fasten them together you will need nails and a hammer. This design will look better if it is sanded and painted wood. If desired wooden boxes you can not fasten together, but hang on the wall in a chaotic manner.

However, the simplest shoe rack is constructed from a pallet. All you have to do with it is sand it down and repaint it to your desired color. Having installed the pallet in a vertical position, we insert shoes into the gaps between the slats. It will hold up well and won't fall off.

In most cases, a limited space is allocated for this room, which is why it is so important to use it wisely.

In the hallway, it is necessary to provide that each thing has its own place: in this case, you will not spend a lot of time on fees. At the same time, if the clothes are simpler and on hooks, then for shoes and accessories it is better to provide special shelves or in the hallway. They will be discussed in this article.

Homemade shelves for the hallway: purpose and varieties

Shelves differ in the number of compartments for shoes, in style. In addition, they can be both open and closed. They differ in depth, height and a number of other criteria.

One of the most common shoe racks is the so-called. It is a complete stand-alone design.

Advice! Even if the space allows you to place several "shoe racks", it is better to proceed from the fact that exactly as many shoes should fit on the shelves as all family members use in one season. The rest of the shoes are much more convenient to keep in boxes.

Do-it-yourself shoe racks in the hallway: a photo in one or another hallway style

If you make shelves with your own hands, then you have great opportunities to organically fit them into. In this scenario, it is much easier to comply uniform style rooms.

Consider which shelves are best suited for one or another popular interior style.

For the now popular, shelves made of natural materials. A tree will look especially appropriate. Such wooden shelves can be decorated with carvings and patterns. A two-tiered model will look very authentic: the shoes themselves are located on the bottom shelf, and on the top - for various accessories and small things. And if this two-tiered shelf is “closed” on top with a “lid”, then it can be used as a convenient one, designed for shoes.

Shelves covered with a lid that slightly extends beyond the edges of the shelves look especially harmonious. Such shelves fit perfectly into. If you are afraid that this functional accessory will look too simple, then keep in mind that this is the main concept of these stylistic trends. If you want something more luxurious for your entryway, then it is better to choose styles like empire, baroque or.

Advice! When using wood, keep in mind that it should be well impregnated and covered with a protective layer.

Brief educational program: "How to make shelves yourself"

You can make shelves for the hallway yourself. This will take time, patience and necessary minimum materials and tools.

It all depends on the material used to make the shelves. If you have opted for, then it is advisable to prefer ready-made processed boards, which can be purchased in modern construction stores. In this case, the manufacture of the shelf will not cause any particular difficulties. However, if you decide to do everything exclusively with your own hands, then you will need the following tools and parts:

plane;
emery;
special glue for wood;
metal corners;
screwdriver or screwdriver;
saw;
self-tapping screws;
roulette;
pencil.

We suggest using the standard wooden board 25 to 35 cm wide and a couple of centimeters thick.

First you need to cut out the vertical side walls. Each of them should turn out to be approximately equal to 80-90 cm. Prepare the support bars, as well as the cross bars. Then proceed to cut out four fragments, which will become shoe shelves. Their size should be approximately 60-70 cm.

Entering a house or apartment, we first take off our shoes and outerwear in the cold season. Accommodation outerwear never causes problems, but with shoes a different situation. Especially this problem concerns large families, as well as owners of extensive shoe collections.