A hanger for an apartment, made directly from wood with your own hands, is always an original and unique thing, so it’s better not to limit your own imagination. At the same time, for the sake of decorativeness, you should not sacrifice the convenience of the design and its practicality.
Main nuances
Wall-mounted and equally floor-mounted, the hanger will be useful in any room. Due to the ease of manufacture, home craftsmen often make them the highlight of the interior when they decorate:
- kitchen;
- bath;
- hallway;
- bathroom.
A child's room can also be decorated with a completely unique design for minimal money.
In general, the design of the product in question must be developed in such a way that the result meets the following criteria:
- conciseness;
- simplicity;
- sophistication;
- strength;
- compactness;
- moderation of cost.
If there is not much space, then it is worth making wall option. Corner design Ideal for a small sauna or hallway.
A floor hanger can withstand heavy loads, but, as a rule, it is not installed in the bathroom or kitchen. Similar models take up a lot of space and perform few functions.
For towels and a robe (apron), it is much more expedient to hang a small hanger there with a couple of hooks.
Furniture items also discussed in this article are distinguished by the method of placing clothes. In particular, they come with:
- hooks;
- barbell (under the hangers).
The first option takes much less space indoors, but in the second room it is much more convenient to hang things. They do not wrinkle and dry quickly. Most often, residential structures are made of wood or chipboard. Metal is more appropriate in a bathroom or kitchen because it is easier to clean and is not so susceptible to dampness.
When choosing a design, you need to make sure that the finished product matches the overall style of the room where it is planned to be placed.
Yes, for classic interior It’s better to create an antique hanger with curly details and a carved edge. It is designed accordingly:
- dark varnish;
- paint with a worn effect;
- decoupage technique;
- gilding, etc.
Hooks are chosen in retro style. By the way, in this case they can be perfectly replaced by mushroom-shaped handles from old cabinets.
Simple hanger
Based on the basic model presented in the drawing, it is easy to build 
a huge number of variations in the most different styles from almost any available material.
You will need to prepare:
- jigsaw;
- impact drill;
- dowels;
- self-tapping screws;
- hooks;
- pencil;
- roulette;
- spirit level;
- screwdriver
Take a flat board of suitable length for the base. If desired, it is easy to supply it with:
- a shelf for hats with side supports;
- panels made of wooden planks;
- compartment for keys;
- hooks for bags, accessories and umbrellas.
For a bath or kitchen, take natural wood conifers. Suitable for residential premises:
- plywood;
It is important that the workpiece is free of visible defects (however, cracks and chips are not difficult to decorate if the product is “antique”).
The length indicated in the diagram is approximate, choose it based on the needs of your family. You just need to take into account that the hooks should be located every 10-15 cm, and the outer ones should be installed no closer than 5 cm from the end.
The product is mounted on the wall using hidden hinges or directly with dowels through the thickness of the material. In the latter case, the holes are drilled so that they are hidden by the hooks. By the way, you don’t have to buy them at the store; it’s not difficult to make them from old cutlery. Steel forks or spoons bend perfectly and are easily fixed with self-tapping screws.
For a bathhouse, for this purpose, you can take cuttings of branches with protruding knots. In this case, the back side of the workpiece is slightly ground off, secured with glue and additionally with screws from the inside.
Also, the base can, in principle, be made in any shape:
- round;
- wavy;
- trapezoidal.
It is also easy to assemble from several planks of different widths and lengths, fastening them with common guides.
To prevent the wall from getting too worn, it must be protected from clothing with a special panel. The simplest option is a piece of plywood covered with foam rubber, and on top: leatherette or silk.
Options
It is not difficult to build a hanger in a “wild” style from any board available on the farm. Its edges are deliberately cut crookedly with a jigsaw with the sole set at a 45-degree angle. Then:
- the surface is sanded with sandpaper;
- treated with a piranha type nozzle or a wire brush;
- chaotic hammer blows form dents;
- covered with stain;
- varnish;
- screw in suitable bronze hooks.
If there are any at home welding machine, then it is not difficult to make a structure from commercially available forged elements. In this case wood panel framed with an iron corner, and selected parts are welded to the latter. Alternatively, the boards are used as a background, or only for a shelf for hats.
Hanger for the nursery
This tree-shaped model is both floor-standing and wall-mounted. To make it they take sheet material. Plywood or chipboard is best.
The procedure here is:
- on the surface of the slab, draw the contours of a tree with a pencil at a height suitable for your child;
- the figure is cut out with a jigsaw, working from the wrong side so as not to damage the laminate;
- the edges are sanded with emery and must be removed from dust;
- primed with any suitable composition and cover with thermal tape;
- the product can also be simply painted in suitable color phthalic enamel - in this case, the end is smoothed with wood putty and sanded.
- the hanger is attached to the wall using ready-made brackets;
- A backlight is placed behind it - this way it will replace the child’s night light.
Wardrobe items are hung on branches if necessary.
None today home interior It’s impossible to imagine without a convenient clothes hanger. In every hallway you can find a hanger for outerwear, most often it is wooden structure. It is this universal device that allows you to compactly place such items as a hat, umbrella, coat, jacket. And if it is made by a professional designer, then it can become both an excellent addition to the interior and its highlight.
Today there are many types of hangers, such as wall-mounted and floor-mounted types. In addition, they are made from the most various materials– wood, metals, plastic. Let's look at the history, types and features of making hangers.
Story
They first began to be used in the 16th centuries AD, in military and church institutions in France. The design of such devices was simple - two wooden boards were fastened with a rope in the middle, creating something similar to a cross. This was the first wooden hanger.
The design and arrangement of hangers have constantly changed, thanks to which today there is a huge assortment of a wide variety of hanger models on the furniture market. Hangers made of wood are especially popular, as they are easy to manufacture and install, are environmentally friendly and have a number of advantages over devices made of metal and plastic. But today hangers have a huge range and all possible design solutions.
Range
Today, the assortment includes numerous variations of clothing hangers. Floor-standing devices are made in the form of lanterns, various statues, pillars, and the tree-shaped design is very popular.
In general, not only clothes are hung on floor structures, but also hats, umbrellas and canes, bags and keys. Therefore, the floor hanger must be stable and strong in order to withstand a wide variety of loads.
The main advantage of any floor installation, is that it does not require any installation - just install it and it is ready for use.
Devices mounted on the wall require high-quality installation, since if they are not fixed to the wall, they may fall off due to loads. They also have the most different kinds executions that will complement or create the interior of the room.
DIY clothes hanger.
Let's look at some original types of wall and hanging hangers:
- Hanging hangers– you can hang ordinary wooden hangers against the wall, it will look original. This unique solution will add lightness and an extraordinary atmosphere to the interior of your hallway.
- Transformers– a convenient, functional design in the form of a wide wooden board with a large number of holes into which dowels made of wood or plastic are inserted. You can install mini shelves on two dowels.
- Branch- another original suspended structure. This is an ordinary branch, placed against the wall, with the help of ropes coming out of the ceiling, above the shelf with shoes in a horizontal position.
- Window– such a wall hanger does not need to be mounted and can be made with your own hands from a wooden window frame without glass.
- Collars– these are original hooks made of wooden flat slats in the form of collars. It is convenient to place both clothes and hats on them. Universal hanger for jacket, shirt, coat.
- Door knob– a unique solution for a wall hook in the form door handle, allowing you to place a bunch of keys, clothes, and a hat.
- Snowboard– a design made from a snowboard and wall hooks.
- Bicycle or its parts– a great addition to a sporty room interior. You can place bicycle seats, handlebars, and pedals in the form of wall hangers.
- Scissors– a creative wall hook for clothes in the form of stuck into wooden stand metal scissors.
- Chairs– excellent design solution, in the form of wall-mounted chairs.
- Minimalist– usually look like round hooks made of wood mounted into the wall. Excellent hangers for the hallway with a modern design.
- Puzzles- complex designer design with retractable puzzle-shaped hooks.
- Intricate devices - today's designers can perform the most various designs from wooden slats, sticks, circles, in the form of original devices.
If you decide to make a clothing device with your own hands, then for this you will need certain knowledge and materials. Before starting work, it is better to choose among the photos finished products suitable option execution of hangers.
What you need to make a hanger yourself
If you decide to make a wall or floor hanger yourself, then you need to be patient, learn the basics of carpentry and prepare the necessary tools:
- Crosshead screwdriver;
- Hacksaw and axe;
- Sandpaper with different abrasive particles;
- Self-tapping screws of various sizes;
- Drills and drill;
- Small cloves if necessary.
In the form of materials you need to prepare:
- Dry wood - you can purchase a finished piece, which will be pre-processed and ready for use in applied products;
- Bars of various sizes from high-quality types of wood;
- High quality wood glue;
- Ready-made decorative hooks or metal rods for their manufacture;
- Silicone of small thickness.
After completing the preparations for the start of work, you can begin making a wooden floor hanger with your own hands.
Manufacturing of floor structures
The first thing you need to do is create a base on which the wooden clothes hanger will rest. Of course, wood is a strong and stable material, but you can make the base metal. To do this, we fasten together a base, preferably a large one, for greater stability, and a tripod made of dry wood, which will subsequently serve as a hanger.
Floor hanger option.
This can be done using wooden blocks, but note that the base should be more massive and heavier than the hanger itself so that it does not fall, preferably 3-4 times. We attach hooks to dry wood if they are provided according to the author’s idea. You can attach a shoulder, this will make the design more airy and pleasant appearance. Hooks should be installed in advance, or made with your own hands.
After the design is ready, we proceed to its finishing. Its style depends on the interior of the room in which the hanger will be installed. In any case, the hanger painted in White color, and if the texture of the wood is clean and clearly visible, the product can only be coated with varnish. The floor coat rack, which looks like wood and is varnished, will fit seamlessly into almost any interior.
Making a wall structure
Of course, it is best to purchase a ready-made design in a store, but this way you will not be able to add originality to the interior and realize your design fantasies yourself. If you decide to make a wall hanger with your own hands, then you can use a regular plank with hooks as a solution.
In the form of a plank capable of withstanding heavy loads, you can use a piece of wooden board, part of sheets from chipboard or MDF. The length should be selected in accordance with your needs and fantasies, the width should be sufficient to accommodate several hooks. You decorate the plank as a base yourself, use your imagination, and implement interesting ideas. After decoration, the product should be varnished.
Original wall hanger with your own hands.
The stores sell a wide variety of coat hooks, so the selection will allow you to choose the most suitable ones. But if you want to do something original, use non-standard solutions - handles from cabinets and chests of drawers, spanners, cutlery. Designers often use knots from high-quality trees in the form of hooks. They can realize their potential if you pick up knots of elegant shape.
If you want the clothes you place to not touch the wall, you can improve the design by making the height wall structure more. This should be done by securing long strips and slats below the coat hooks themselves. In this case, you can install a shelf or a mirror in part of the structure, you can make holders for keys.
The wall hanger is fixed as high as possible. To do this, use a drill and drills to make holes in the wall, insert dowels there, screw self-tapping screws into them and place a hanger. Please note that holes should also be made in the hanger itself for attaching screws to the heads. The distance of the holes should be parallel to each other at different angles of the structure. A larger number of holes and screws in the wall will provide stability.
Video: DIY wooden hangers
Usually the hallway is small, so when arranging it, every square centimeter is important. To save space, it is better to install a small hanger rather than clutter the room with cabinets. Moreover, there are interesting ideas handmade wooden hangers. These are the ones that will be discussed in the article.
Making a wall structure
To make a wooden wall hanger with your own hands, you will need the following tools:
- Sections of boards.
- Hacksaws with different grits.
- An awl and several hooks.
- Jigsaw and screwdriver.
- You also need to stock up on a blowtorch.
First you need to decide exactly how long the hanger will be and cut a piece from the board the right size. Using a jigsaw, you can give the edges a round shape.
When making a hanger from wood with your own hands, the surface of the board used must be treated with a blowtorch. If it is not there, the board can be burned over the burner. In this case, you must be careful not to injure your hands.
The workpiece must be attached to the wall. There are several ways you can do this. You can attach “ears” to reverse side boards, drilling several holes for fastening, or fix the resulting workpiece to the wall.
The hooks must be secured with screws. This hanger will look better if you attach antique-finished hooks to it. The design will look more spacious if you choose a triple hook.
Tools for making a floor version
You can also make a floor clothes hanger from wood. When performing such work, you cannot do without a drill, self-tapping screws, and a Phillips screwdriver. To make a floor-mounted clothes hanger from wood, you need to stock up on a fitting, a self-tapping screw and drills. In addition to a level and a hacksaw, you will need a tape measure and stain. You will need varnish and coarse sandpaper for the job.
In addition, to work on a wooden clothes hanger, you will need thick pieces of wood. Instead, you can use an old metal Christmas tree support or a floor lamp. The main thing is that the wooden base is stable.
You can’t do without a wooden post. You can buy it for a hanger in a wooden hallway hardware store, or make it yourself.
You also need to prepare wood glue and metal hooks. To perform such work, you will need a piece of rubber sheet (it must be glued to the bottom surface) and solid boards (they are attached near the cross). You can make a drawing of a wooden hanger in advance.
The procedure for making a floor hanger
When working on the lower part, first of all you should make a cross. The bars for the rack hanger must be sawn in half and sanded to remove burrs. After this, they should be connected at an angle of 90 degrees.
To make the connection tighter, with the help of a chisel, you need to select the recesses near the elements of the cross along the entire bar. By connecting these areas, you can see that they are fixed motionless. After that, using a fitting, you need to cut out the supports of the product and fasten them with self-tapping screws.
Before screwing in, a hole should be drilled with a drill so that small cracks do not appear on the wood, reducing its service life. The diameter of the screw should be larger diameter drill. The self-tapping screw should be screwed in only after the holes are filled with glue.
When manufacturing the upper part, it is necessary to take into account next moment: it is better not to attach the hooks to the trunk, but first mount them on a small square. Alternatively, you can step back a little from the top and attach the bars to the trunk.
If you have to hang a lot of clothes on the product, you need to drill holes under the screws for strength and fill them with glue. To make the hanger look neat, it must be treated with stain.
If you wish, you can add creativity using original elements. For example, hooks can be replaced with cutlery or towels with branches.
original version
How to make an original model clothes hanger yourself? For the next option, you will need a saw, a planer and several wooden boards. You also cannot do without a drill, a brush and a screwdriver. In addition, you should stock up on rubber gloves and varnish.
Having made the drawing, you need to start working. After cutting out the boards with a jigsaw, you should sand the surface. The edges of the wood used must be rounded with a boss.
After the varnish has dried and the workpiece is ready, you can start working on the hooks. They can be made from either metal or wood.
Using electric or hand drill, you should drill several holes in the box and place the prepared wooden rods on the glue (it is important that they protrude one centimeter). Finally, you need to drill several holes in the workpiece and insert the prepared hooks.
Wooden hanger option
It can also be done in another way. To make hooks, you should use oak blocks that have knots. The log must be split in half using an ax. The length of the knots should be 3 centimeters, and the diameter should be at least 15 centimeters.
One side of the chip must be leveled electric plane. Next, the surface should be treated with varnish.
Use self-tapping screws to attach the hanger to the wall. First you need to drill out the chamfer with a drill, and then prepare the hole. Its diameter should be the same as the screw head. This is necessary so that the product is not damaged.
Wooden hanger for children's room
If desired, you can make a hanger for the children's room. To do this, you need to prepare a blowtorch, jigsaw and hacksaw. Can't do without sandpaper, screwdriver and awl. You should also stock up on a tape measure and a pencil.
In addition, you need to prepare several hooks, screws and wooden boards. To decorate a hanger, you should use paint brush, primer varnish. You can’t do without decoupage blanks, scissors, glue and a sponge.
After making the drawing, you need to take out a wooden board and place it on a stable support. Using a jigsaw you need to cut out several blanks.
The next stage is firing the boards. To do this, you need to use a blowtorch or gas burner. The sawn parts must be coated with paint or varnish.
If you want to make a wall hanger, you need to install metal strips and drill several holes for fastening. You can also make through holes. After they are done, you need to pass the screws.
The final stage is attaching metal hangers to the wall. They can be arranged either in a certain order or randomly. To fix them, use magnets or an adhesive strip.
Hammer hanger option
The peculiarity of such a hanger is that the hooks will be replaced with old hammers: you need to cut off the handles from them, and leave only their ends. First you need to prepare the board - sand it and cover it with a layer of varnish.
The hooks must be laid out and the place of their attachment must be marked on the board with a pencil. Next, you need to mark with a pencil the locations of the screws. Finally, you need to attach the hooks.
You can attach an additional shelf for scarves, hats and other small items. They need to be done like this: having measured the distance on both sides, you should take the bracket and mark several holes for fasteners. After drilling the hole, you need to mount the bracket.
The structure must be attached to the wall. To do this, you need to mark the desired place and make holes. The size of the drill should be the same as the size of the dowel.
Making a hanger from natural wood
You can also make a hanger from natural wood. First you need to split the decks in half. One of the sides needs to be leveled using an electric plane.
To prepare the surface for use, the wood must be treated with an anti-fungal agent and covered with a layer of transparent varnish.
To install the hanger on the wall, it is better to use self-tapping screws. After drilling the chamfer, you need to prepare the hole. To prevent damage to the product, it is important that the diameter matches the screw.
You can make a hanger from broken coat hangers. To do this, you need to prepare a board and broken hangers. You can't do without glue, a brush and varnish.
The board must be prepared in advance: drill several holes for fastening and attach the prepared hangers. After this, you should wait for the glue to dry.
You can also attach the back of a wooden chair to a hook from an old hanger. The edges need to be sanded. You can cover the hanger with bright paint.
As you can see, making a hanger yourself with your own hands is not so difficult. To do this, you just need to show desire, set aside a little time, and also purchase some materials and tools at a hardware store if they are not available at home.
When we come home, the first thing we do is take off our outerwear and hang it in the closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors various forms and sizes.
Thanks to the simplicity of the design, it’s not at all difficult to build a hanger in the hallway with your own hands.
Advantages of self-production:
- N low cost of the product;
- IN opportunity to achieve the best combination with interior;
- AND individuality of the hanger: your friends and acquaintances will not have one like this;
- R academic work is highly valued.
Original wall hangers in the hallway are an important and integral element of the interior.
Before starting production, you need to analyze the shape of the corridor. If it is quite elongated, it is better to give preference to a long hanger with compact shelves or without them at all. For large rooms, you can choose any model.
It is also worth considering the features of the interior: style, details, predominant colors.
The simplest type of coat rack is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, and several smaller ones, fastened together.
In the traditional version, the wall hanger is a bar on which hooks and pins are located.
If you want to show your creativity, you can make a custom model. For example, you can make an excellent hanger for a nursery if you create a blank in the shape of a cloud, tree or twig. For the corridor, it would be better to cut out something else: antlers, a fence or an inscription.
Wall hangers in the hallway and coat hooks are selected according to the interior style of the room.
Materials and tools
Nowadays, in almost every hardware store, the buyer is provided with such a rich assortment that it is not difficult to purchase everything necessary to create a wooden hanger with your own hands in the shortest possible time.
DIY wall hanger for the hallway - simple work happy with the result.
To do this, you should buy or prepare the appropriate tools:
- jigsaw
- Hacksaw;
- Blowtorch;
- Sandpaper;
- Screwdriver or hammer;
- Awl;
- Pencil;
- Roulette.
Tools that will come in handy at work.
Materials you will need:
- A piece of wooden board;
- Screws;
- Hooks.
Materials for future hangers.
For decoration:
- Primer;
- Paint brush or roller;
- Varnish or other coating;
- Blanks for decoupage, scissors, glue, textured sponge.
Materials for decorating hangers.
The process of making a hanger
A classic hanger made by yourself for the hallway does not require significant effort. Manufacturing takes minimal time. Initially, you need to think through the design in detail; it is recommended to make a drawing on graph paper and calculate the consumption of materials.
You need to transfer the drawing using a pencil or marker.
Then you should get wood sheet(or a board) and put it on stable supports so that a few centimeters remain between it and the surface of the floor or table. Armed with a jigsaw, cut out the blanks of the required shape, following the contour. If you want to make the edges embossed, you need to go over them with the same tool.
It is necessary to handle roughness, sand the cut areas and sand them.
Next step - giving the desired appearance. To fire the boards you will need blowtorch, which is successfully replaced by a gas burner. On at this stage Care must be taken not to injure your fingers or damage the material. Then you need to get paint or varnish and cover all the sawn parts.
After drying, the product is assembled using screws.
The hinged method involves mounting small rounded metal strips, called "ears". Holes are drilled in them for fastening into dowels with screws. Moreover, reliability is determined by their length.
A DIY wall hanger can be attached in several ways.
Another, no less popular way is to do through holes. After they are created and processed, screws or nails with a long stem are passed through and the hanger is attached to the wall.
For fastening, as a rule, screws or small nails are used.
To complete the work you need to attach metal hangers. They can be arranged randomly, in one or several rows.
Fixation is possible with the following devices:
- "Suction cups";
- Adhesive strip;
- Magnets.
Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is only suitable for hats.
Any brave design options will favorably emphasize the relevance and originality of the interior.
Making a hanger from longitudinal and transverse boards
This design resembles a lattice and involves making a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, two layers can be roughly distinguished: the first- with transverse arrangement, second- with longitudinal.
Drawing of a wall hanger with dimensions.
To create a wall hanger with your own hands, you will need to stock up on several long boards. It is better to give preference to lumber 10-20 cm wide and 1 m long. Having decided on the size, you should obtain the required number of blanks.
How to assemble a hanger.
After that, it is necessary to process them so that there are no bulges, chips and roughness, giving Special attention edges. Then you need to first lay out the first layer, maintaining parallelism and the same distance between the planks. If everything is satisfactory, it's time to move on to the second level. Armed with a screwdriver (or, if you don’t have one, a hammer), fix their position at the intersection points.
A simple hanger option for making yourself.
The hooks need to be attached to the top boards. If they have a vertical position, then it is better to place the hooks in the upper part in one row. For a hanger, the outer side of which is formed by vertical planks, you can create several levels by attaching hooks to each of them.
Dimensions of hanger with shelf.
Decoration
You can complete the production by giving the product an original appearance. The most interesting surface will be if:
Before you begin applying the coating, you should clean the wood from traces of dust, dirt and grease.
DIY materials for decoupage hangers.
We need to prime our wooden hanger with white acrylic paint.
Glizal is a transparent paint that, with some effort, forms a textured surface. Before starting work, you should dilute the glisal with water according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. You must act quickly, otherwise the coating will harden in half an hour. To artificially age wood, a type of varnish called craquelure is used.
It is applied to a pre-painted surface, which as a result becomes covered with small cracks.
Decoupage allows you to create wooden crafts, suitable for any interior. Most often they resort to it when they want to get furniture with an antique effect and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.
Having cut out paper patterns, it is better to lay them on the surface and evaluate how they will look.
If everything suits you- spread wrong side glue, apply to the wood and level it so that no bubbles form later, then cover it with furniture varnish and leave until completely dry.
Which finish to choose is up to you. After the varnish has dried, screw the handles into place.
If you have artistic skills, you can draw a picture acrylic paints. Initially, the background and large elements are created, then the details are drawn. To finish work better by application varnish and craquelure.
VIDEO: Stylish hangers in the hallway.
How to make a wooden hanger with your own hands? It's very simple, we'll tell you how. It would seem, what is a hanger in the house? Almost no one notices it, even though it is quite a significant and functional item. You will be surprised how you can improve it, and even do it yourself. There are no special skills required, so anyone can do it.
Materials for work: what kind of wood to make a hanger from
Depending on the type of hanger, we may need different materials for work. There is a general handy list that will be quite useful for any of the jobs in this category.
The arsenal of tools looks something like this:
- The material from which the hanger is made.
- Self-tapping screws.
- Screwdriver.
- A grinder saw that can be used to cut the required parts of a hanger.
- Dowels, if the structure is wall-mounted.
- Screwdriver or drill (preferably electric).
- Level, tape measure, pencil.
- Sandpaper for cleaning the surface.
- Hooks.
DIY floor wooden hanger
Wooden things have always been of high quality and durable, as well as useful in everyday life. This also applies to hangers, so we will now try to build a wooden floor hanger with our own hands.
This work will not take us much time. You will need approximately 20 free minutes, as well as all the necessary materials.
To create a wooden floor hanger we will need:
- Six tribes (copper).
- Four tees (copper).
- Four plugs (must be the same inlet diameter).
- A wooden round stick of the same diameter. The total length should be 5.3 meters, cut into parts: 2 pieces of 125 cm, two more of 70 cm, 4 pieces of 20 cm, and the last 6 of 10 centimeters each.
The process is very simple. Following the drawing plan, we must assemble all the structural elements. To make the task easier, they are marked with letters in the figure.
- "A" - 125cm.
- "B" - 70cm.
- "C" - 20cm.
- "D" - 10 cm.
To further secure our floor hanger, use wood glue. Copper inserts will look interesting; on the one hand, they will attract attention, and on the other, they will be quite durable in use.
DIY wooden wall hanger
An integral part of any corridor, as well as an item that is simply necessary in every apartment.
You can build a wall hanger yourself using all the necessary tools. The material options can be different, the best of course is wood. For the “cheaper” option, you can use chipboard.
The tools that we will definitely need are:
- Screwdriver or screwdriver.
- Drill.
- The set was drilled.
- Roulette with a pencil.
- Hooks.
It is very simple to do - just measure the required distance and drill hooks to the board, and then hang the finished hanger on the wall. But there is more interesting options such crafts.
Hammer wall hanger
In this craft, we will need everything the same as in the previous version, only instead of hooks we will use old hammers, from which we will need to cut off the handle, leaving a short end, which we will attach to the board.
Progress:
The approximate time it takes to actually make a wall hanger is about 2-3 hours (this includes the shelf).
Extraordinary ideas for a wooden hanger
Floor and wall hangers are considered some of the classics, but when you're in the mood for something out of the ordinary or creative, you can consider the following design options.
Master class “Hanger made of real wood”
The word "tree" does not simply mean wood material(board), namely pieces of real natural wood. Oak chocks are best suited for this work, perhaps even with knots that will serve perfectly instead of banal hooks.
Progress:
The hanger will undoubtedly attract attention, as well as brighten up the boring atmosphere of the room. Most often, this option is placed in a country house or in the country, less often in apartments or mansions.
Photo of wooden hangers in the interior
As you can see, you can make a wooden wall or floor hanger - for clothes or jewelry, for children and adults, for a dressing room or for a hallway. It could be both a classic and some kind of unusual wooden hanger - from skis, hammers, old things, a fence or doors, from pallets, and so on. The main thing is to connect your imagination, and for inspiration, I suggest looking at photos of various wooden hangers that you can make yourself.
We can conclude that there are a lot of options for hangers, as well as ideas for their implementation, and each of them is unique in its own way. Therefore, choose which of the ideas is best suited to your home and start making your own masterpiece. Drawings and available materials will help you with this. The main thing is to have an original idea and the mood to implement it.
