How to sew up pipes in a combined bathroom. How to close the pipes in the toilet? Video about installing roller shutters

August 4, 2016
Specialization: master of internal and exterior decoration(plaster, putty, tiles, drywall, lining, laminate and so on). In addition, plumbing, heating, electrical, conventional cladding and balcony extensions. That is, renovations in an apartment or house were done on a turnkey basis with all necessary types works

Probably most residents apartment buildings are faced with the question of how to close sewer riser in the toilet or bathroom, if the bathroom is combined. But in addition to the decoration, there is still the pipe itself, which often needs to be replaced, so these concepts are sometimes inseparable from each other. I want to talk more about this and also offer a video in this article.

Sewer risers

Method 1 - decoupage

As I already said, there are at least four ways to decorate pipes. I want to list them, in general, and describe the decoration technique.

Perhaps decoupage can be called one of the simplest ways:

word taken from French, where it sounds like “découper” and is literally translated as “cut”;
the essence of the process here is as follows - you cut out any design with your own hands or select any object, and then stick it on a rough base, in our case - on a riser;
there can be an endless number of options here, since such pipes are always cold, so you can choose any materials for the ornament;
in addition, for similar finishing you can use paints and varnishes and create the most fantastic images;
This type of decoupage is also widely used as decoration with artificial climbing plants.

Frame

I would like to say in advance that frame methods include decoration using a box, which can be covered with putty plasterboard, ceramic tiles or plastic panels.

There are several installation methods and the instructions do not give any instructions in this regard, since this is simply not provided for in civil and industrial construction.

Frame for forming a false wall: 1 - wooden slats; 2 - water pipes; 3 - sewer riser; 4 - water meter

In separate bathrooms, the riser passes through the toilet, where there is also a water supply with a water meter, and since the width of such a room is about 75-80 cm, there is no point in making a separate box. It is much more practical in such situations to build a false wall.

Both 50×50 mm wooden slats and CW and UW metal profiles, which are usually used for installation, are suitable for lathing here. plasterboard structures. Personally, in such cases I usually use the rail, since this most often has to be done after uneven walls, where there was no finishing, and the metal profile will lose power if it does not fit tightly.

The situation is exactly the same when installing lathing in niches, only here the process is complicated by the fact that you will need to install plasterboard flush with the plaster, and measuring all this with a plumb line or level is extremely inconvenient and time-consuming. Therefore, I change the situation a little - first I do lighthouse plaster, and then I close the niche. You understand that leaving 12 mm on the gypsum board or gypsum board from the slats to the wall surface is not at all difficult.

But, as you understand, apartment designs vary, so in some cases the riser may be located on the wall separately from the water supply or next to it. As a rule, this most often happens in combined bathrooms.

Therefore, in such cases, it is better to use CW and UW profiles for the frame, as shown in the top photo - although they are a little more expensive more wood, but they are much more reliable. Whether or not to leave an inspection hatch for the water meter and main taps depends entirely on their availability.

Method 2 and 3 - gypsum board putty and ceramic tiles

When the frame is ready, be it a box or a false wall, installing drywall on them is quite simple - just screw it on with self-tapping screws. I most often cut off the sheet after it has been partially fixed - this is much more convenient and accurate - you can never go wrong.

When installing drywall, it is very important to follow one rule that will ensure its further good finish- this is the correct screwing of a self-tapping screw into a profile or rail.

In such cases, the head above the surface should be immersed by 0.5-1 mm - no more, since when it sticks out, it interferes with the lining, and when immersed deeper, it breaks through the cardboard. In order not to make a mistake, it is best to use a special nozzle with a limiter skirt - even old masters use it, including me, if it is, of course, at hand.

It is very important to correctly calculate the hatch (if it is needed) even while we are making the frame - you must have free access to shut-off valves and meters. But if this is putty, then the question becomes much simpler, but the tiles should be calculated so that there is a whole copy per hatch - then you won’t have to install bulky and ugly doors for the sanitary cabinet.

The highest class here would also be such a situation if whole line in this case, there will also be scraps under the ceiling, and near the floor (this needs to be calculated when unsoldering the plumbing). But be that as it may, even if you make a slight mistake, sound insulation with a box increases significantly.

Magnets are placed between the drywall and the tiles, as shown in the top photo (they are held on the same tile adhesive). And in exactly the same places, metal plates with perforations are glued to the back of the removable tile with silicone, in order to adhesive composition fixed metal better (such magnets are available in almost all building materials stores).

If you wish, you can attach a furniture handle to the removable tile, but even without this it can be removed very easily - there remains a gap at the seam.

Method 4 - plastic panels

But the situation with PVC panels even easier than with putty - in any case, all the work here is of the dry type, so installation is much faster. Some people believe that the frame for a box or false wall here should only be wooden, but I do not share this point of view at all. The fact is that wood is important only if the panels are installed with a stapler, but I believe that self-tapping screws would be much more appropriate here.

Plastic inspection door 200×300 mm

Inspection door for water meter and shut-off valves It is not at all necessary to do it yourself - it can be purchased from building materials, and different sizes, in the form of a blind sash or blinds. Installing it is also very simple - along the perimeter of the fastener door frame a hole is cut out and the entire structure is placed on “liquid nails”.

Replacing the riser

Well, we seem to have sorted out the decoration, but what to do if the riser is old or even already leaking? Of course, there is only one way out - change. Moreover, I advise you to do this as deep and higher as possible, and if the neighbors agree, then on all floors (or several) at the same time!

Certainly, The best way The only way to change a sewer riser is to contact the organization that services your home and do this in all apartments. But here a problem of this type may arise - the neighbor has already had repairs done, his pipe is not leaking, and he will do his best to resist replacement so that the plumbers do not damage his finish.

But the fact is that in most cases this is exactly what happens, so you have to make a replacement in a separate apartment or guarantee that you yourself or your master are responsible for the integrity of the lining of his bathroom.

Dismantling the riser (1-fan fitting; 2 - revision)

That is why we will consider only the second method:

for replacement cast iron pipe First of all, you should cut it off with a grinder under the ceiling, leaving no more than 100 mm of the shoot from the neighbors. Make two cuts 5-6 cm apart from each other and remove this insert;
now cut off all horizontal bends from it to the remaining bathrooms;
gently swinging the riser, pull it out of the fan tee, and even better - together with it, since it will still have to be removed, only so as not to damage the bell of the riser of the neighbors below;
when the dismantling is completed, place a rubber reduction at the bottom to transfer to the 110th pipe and insert a tee, adapter or cross into it (depending on what is required for your sewer installation);
raise the riser one and a half meters with a pipe and cut a revision into it;

Place an adapter on top of your neighbor's pipe, placing it on the silicone and pulling it over it;
after that, insert the missing piece of pipe and lower half of the coupling onto it;
If desired, silicone can be applied under the coupling O-rings to guarantee- that's it - the replacement is ready!

Conclusion

I would like to warn you that there is condensation on the riser cold water when installing the box is inevitable, especially at first, until the tile adhesive dries. Well, if you have questions or suggestions, write about it in the comments and we’ll discuss it.

August 4, 2016

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

Often pipes, meters, and plumbing boilers are damaged general form bathroom or toilet. You can decorate your bathroom different methods. You can beautifully remove the technical unit with your own hands by choosing the right method.

A sewer riser, water heater or bathroom meter has nothing to do with the aesthetics of the room. That's why many people want it. You can do this, but it is important to know how to do it right.

Ways to disguise a riser in the bathroom:

Construction of a false wall;
Usage plastic panels;
Roller shutters;
Plasterboard or plastic box;
Utility cabinet.

A false wall is considered the most drastic way to cover the back with pipes. The material for the wall will be plywood or chipboard. Often the wall can be covered with plasterboard. Before work, you should prepare the pipes, remove rust and paint them. Galvanized profiles are used for the frame. They are attached to the floor and wall. The material is attached to the frame using self-tapping screws.

For a separate toilet, you can install a wooden frame instead of a galvanized one.

Plastic panels are often used for bathrooms. They have a number of advantages: resistance to humidity, strength, lightness, low cost. At the same time, installation of the material is simple and does not require additional painting. The panels have an air chamber, which makes the material soundproof.

More in a simple way the use of roller shutters is considered. They are installed and operated like regular blinds. At the same time, new developments provide options with sound insulation or heat conservation.

The box is made from a metal profile, which is covered with plastic. It can be removable, which is very convenient. The box has an inspection window. We hide the hatch under the tiles. This is a kind of window for accessing the pipes. Great option counts utility cabinet. This way you can not only hide the pipes, but also have a place to store household chemicals.

Options: how to make a box for pipes in a toilet from plasterboard

The location of the pipes also determines the camouflage option. This way you can hide an entire wall or a place with communications. The first skin is considered more aesthetically pleasing. The box is mounted in two ways. The first involves the use of a frame. This gives strength to the skin. The second option is frameless.

Before work, you should make a plan of the room with the location of all the pipes. You will need to calculate the amount of material and prepare the necessary tools.

For the bathroom it is better to use moisture-resistant plasterboard. It is resistant to fungus, environmentally friendly, and guarantees sound insulation. The material can be used for both horizontal and vertical communications.

Creating a box from plasterboard:

You need to step back 2 cm from the meter and the pipe and draw vertical lines on both sides. Then the profile is fixed.
We attach plasterboard sheets.
The joints should be puttied and hidden with a decorative plinth. The surface should be painted over.

Other materials are also widely used for the box. So the lining is made of plastic. Expanded polystyrene has many advantages; it is considered to be an ideal option for the bathroom.

How to properly cover pipes in a toilet with plastic panels

First you need to prepare the frame. First, measurements are taken. It should be taken into account that in addition to the sewerage system, there are also water pipes in the toilet. All manipulations with measurements are performed using a tape measure. On the created plan, all fastenings and main cladding elements should be indicated.

Before masking the pipes, you should check their condition. If necessary, communications are replaced.

The frame is then attached to the surfaces. Wooden slats or profiles should be screwed to the bottom and top parts. Then they are mounted every 30-40 cm. Frames with doors should be located on the frame. They should be secured at the end of the base.

What distance should be from the toilet to the wall? Look for the answer on the next page:

Stages of covering the frame with plastic panels:

Closing begins with the starting molding. The element is attached to the frame with self-tapping screws. To hide the fastener heads, the screw must pass through the shelf that the next panel covers.
Next we lay the next panels, placing them in the grooves. The free end of the panel is secured with a self-tapping screw. All panels are installed this way.
Doors are installed in the wall.
A molding is also mounted on the opposite side. All joints are processed in the same way. Ventilation must be provided in the box.

Fastening elements can be not only self-tapping screws. Claypers, clips, and glue are widely used. The main thing is that the fastening can be removed if necessary.

Creating a door in the toilet behind the toilet: simple and useful

A simple option on how to sew up pipes in a toilet: stylish blinds

With the help of blinds you can quickly and easily hide an unwanted technological unit. This is an aesthetic option. Blinds have many positive aspects.

Pros of using blinds:

Installation is simple and easy to do yourself;
Do not take up much space, suitable for small rooms;
Provide free access to pipes;
Wide range of different options;
Simple repair.

You will be pleased with the durability of the material and affordable cost. For bathroom and toilet ideal option will be aluminum or plastic blinds. Wooden curtains are not suitable for rooms with high humidity.

Plumbing blinds are also used for baths and toilets. This is a stylish and neat option. You can often find blinds with photo printing on the market. At the same time, a niche is created inside where it is convenient to store household items.

Ways to close the pipes in the toilet (video)

Decorating the plumbing fixtures in the bathroom is considered a particularly sensitive task, especially in a Khrushchev-era building where there is little space. Disguise can be different. The sealing can be done using a false wall, PVC panels, blinds or a cabinet with shelves inside and free access to communications. Decorative materials also varied. The use of plastic, plasterboard, and fiberboard is very popular.

When carrying out renovations in the bathroom, you inevitably have to deal with open pipes, which I would like to close beautifully. In this article we will tell you how to hide pipes in a toilet using plastic panels and blinds, and also show photos of interesting solutions.

Preparatory work

The photos and videos at the end of the article show the final results of masking the water supply, as well as detailed sequences of work processes. But before you start hiding the pipes, you need to remember the following important preparatory points:

Communications must be masked in such a way that they can be accessed if necessary. After all, it happens that the emergence emergency situation leads to additional troubles and expenses, for example, it is necessary to break a wall or partition.
Before installation, sewer and water pipes should be thoroughly checked to ensure that no leaks occur during operation.
All connections must be tight.
Each transition element of the pipeline (coupling, angle, tee) responsible for hot water supply must be made of the same material as the pipe itself. Then heating individual elements the pipeline will be accompanied by the same expansion, which will prevent unpleasant consequences from occurring.
It is better to use connecting elements to a minimum, then breakdowns will occur less often.

Possible ways to disguise pipes

To get rid of the unsightly appearance of sewer and water pipes, you can use one of the following methods:

Installation of a decorative box. With the help of such a structure you can not only hide required amount pipes, but also acquire functional shelves for various jars, tubes or bottles. To avoid turning a minor leak into a real flood, you need to take a rational approach to aesthetic design. The decorative box should be made only from materials that can be easily dismantled (plasterboard, plywood, etc.). And if the box is equipped with a door, then dismantling may not be necessary.

Making a cabinet for a sewer pipe. The use of this method of disguise allows you to save both space in the toilet and cash, which would have to be spent on a cabinet under the washbasin. In addition, meters, filters and other equipment remain available throughout the entire period of operation of the system. When hanging shelves, you should pay attention Special attention the fasteners used, because in the future they must withstand not only the shelves themselves, but also everything that will be installed on them over time.

Application of roller shutters is the simplest and most quick way masking pipes in the toilet with your own hands. Externally, such a niche will look very neat and attractive, and the roller shutters themselves are very easy to use. The use of this option is especially beneficial if masking of the boiler is required, since this device cannot be completely covered with a solid partition. At any time you may need access to temperature sensors, and a rising roller shutter can fully satisfy this need.

The use of plastic panels for finishing niches. This material imitates a coating made from ceramic tiles, stone or natural wood. Besides, installation work will not take much time and will not require any special knowledge, and the performance characteristics of such panels suggest their use in high humidity. Just before starting work, you should make sure that you have wooden frame, to which each plastic panel will be attached.

In addition, you can experiment with ceramic tiles, which are also often used for camouflage. sewer system. For example, can be installed on an aluminum frame plasterboard partition, while leaving the window necessary to provide access to the pipes. Then close this window with a special screen or a small tiled door. The presence of such a hatch will not have any negative impact on the interior of the bathroom, but will provide access to all communications.

Choice correct option masking of pipes depends on many factors, but you always need to monitor how well and correctly the installation is done, since in a toilet that usually has small area, it is quite difficult to carry out work of this kind.

The right solution, coupled with quality work, will result in a toilet that is not only attractive, but also functional.

Video

See instructions for making a PVC box:

Photo

Communications located in the bathroom do not decorate the room. No matter how much the pipes cost, they will not add attractiveness to the interior. The article describes effective ways to close the sewer in the toilet. Materials that are suitable for this are described. There is information about proven methods for making camouflage structures. It explains how to hide communications and sew up pipes without blocking access for maintenance.

How to close the pipes in the toilet

In a typical house, the wiring is simple - in the corner of the toilet there is a common riser for the sewer system, and water supply pipes run parallel. It is necessary to disguise both the common risers and the branches extending from them.

Difficulties arise when it is necessary to hide not only pipes, but also metering devices that require regular access.

An ordinary box will not save you in this case; you have to make partitions or hide them with a screen.

It’s easier to do this in your home if you think about masking communications during the creation of the project. They lay pipes in the walls and install technical hatches for access to the devices. You can place metering devices in a special room. In multi-storey buildings, do under sewer pipes deep grooves will not allow it, and the thickness of the walls will not allow it.

Only closing and external decor saves back wall. You can decorate with any finishing option. You can make a beautiful plumbing cabinet that can be assembled quickly according to the diagram and with which you can close the plumbing.

Solutions for how and with what to close the pipes

The choice depends on the direction and size of the pipes, their placement, installed devices

Interior features matter. The choice is up to the homeowner.

Plastic panels

Even an inexperienced craftsman can make such a design. Making a plastic box in a bathroom niche is inexpensive. But it can be used and sealed only if the walls are already finished with plastic or painted in the same color.

Making a screen from PVC plastic boxes:

Checking the quality of communications. You need to check the quality of the connections and the condition of the devices.
Surface treatment. Antiseptic compounds will prevent the appearance of traces of fungus and mold.
Manufacturing of sheathing. A frame is made of wooden blocks or a metal profile along the walls, where the pipes are hidden.
Cover and decorate with removable panels. It is important to fix each panel correctly; use a stapler or small nails for fastening. Gaps at corners and joints can be hidden with decorative trims.

There is no need to make a plastic hatch; it is better to buy a ready-made door. It will not be possible to hide it, so it is advisable to use a model that allows you to work comfortably.

When masking communications and metering devices, it is worth leaving access to them using a viewing window

Plasterboard construction

To make a frame from a profile, you need scissors for cutting metal; wood elements are made using a hacksaw. You will need a hammer drill to mount the parts on the wall.

The wood must be impregnated with protective agents in advance.

After this, several steps are performed:

Mark the surface of the walls near the sewer.
Prepare the frame parts.
Guides are attached along the riser.
The embedded elements are mounted into the profile.
Install the hatch.
Plywood is attached to the end of the box.
Sew up the end with plasterboard.
Sew up the front part.

For any subsequent finishing, the drywall is coated with a primer. Most often, it is used to decorate the room. Instead, you can paint the box or install plastic panels.

Plumbing cabinet

Convenient, mounted on the wall behind the toilet, allows easy access to all equipment. If there is enough space in the toilet, you can install shelves for storing household items. Doors are made from any suitable material taking into account the style of the interior.

Hinged doors are secured in the same way as any doors - they are hung from the base on hinges.

You can use sliding products or an accordion door

But keep in mind that for the accordion extra bed will not be required, and sliding doors will not fit in a typical toilet.

Blinds

This design is good because it saves free space. The regular ones are inexpensive and look good. They do not interfere at all, the plastic structure is easy to install. But they cannot be used in elegant interior. Metal blinds are stronger; do not use fabric ones, because textiles are not suitable for wet rooms.

Roller shutters

Thorough and robust design, but in an ordinary bathroom it does not suit the interior and space. They can only be installed if you have enough space. Take a closer look at automatic models, controlled using a remote control.

Installation of a false wall

The partition will serve to create original decoration, convenience, space division. Surfaces can be decorated with all sorts of patterns, and decorative lighting can be created with stickers. You just need to select the material suitable for this purpose.

Concealed installation - gating

Can be hidden without installation decorative cladding– hide the wiring in the cut grooves. Using a hammer drill, grooves are made in the places where the pipes go, and water supply and sewer branches are placed in them.

When installing hidden, you should try to run the pipeline in a straight line with permanent components and connections.

This installation method has 2 advantages - the almost complete absence of spoiling elements appearance, and in saving space.

There are several rules that do not allow gating:

Pipes are not laid in load-bearing walls.
Only pipes are placed in the grooves, without detachable connections (soldered), access to other types must be provided.
Do not make recesses in walls where electrical lines are laid.
It is necessary to take into account the expansion of the material and prepare grooves of suitable width.

Examples of successful solutions

To camouflage pipes in, take into account all factors - where communications can be installed, the availability of equipment, the size of the room.

It may be better to install a plasterboard box or make a false wall. It all depends on the conditions of your apartment.

In the toilet rooms of comfortable houses and apartments, sewer risers and various water supply pipes are installed, equipped with various taps and meters. Most often, uncovered communications are laid along the walls, which spoils the appearance of the toilet room. They cannot be removed, but they can be closed or hidden.

To solve this problem with your own hands and without unnecessary hassle, there are many ways that will help not only hide the pipes, but also make the interior of the toilet more harmonious.

Selecting material for closing pipes

The modern construction market offers a large selection of finishing materials. However, not all of them can be used to hide pipes in the toilet.

You should choose materials that will not corrode and change their shape at high humidity and temperature. In addition, with their help it should be possible to build a compact and lightweight structure.

Finishing materials with similar characteristics include:

drywall;
moisture-resistant types of plywood;
plastic panels;
simple and refined MDF;
roller shutters;
tile.

In order to determine how much material will be needed to cover the pipes, it is recommended draw a toilet plan to scale, put the location of communications on it and draw various options box location. Thus, it will be possible to understand which one will look more organic and save more space in the room.

In addition, do not forget that when building a box with your own hands that will hide the pipes, you should leave an opening for free access to pipes. Its dimensions must be such that plumbing work can be carried out freely.

It should also be borne in mind that the box with which the communications will be closed must be made so that in the event of an accident or if pipes need to be replaced, it can be easily disassembled.

How to cover pipes with a plasterboard box

A false wall made of gypsum plasterboard or plasterboard is the simplest and cheapest option for hiding pipes in the toilet. GKL must be waterproof, with the greatest sheet thickness.

To build a plasterboard box, first of all you will need build a frame, consisting of guides and rack profiles. A tight connection will need to be ensured between the concrete or brick base and the frame.

Materials needed to make the structure:

Metallic profile.
Drywall.
Self-tapping screws for metal.
Dowels for fastening the profile.
Putty.
Decoration Materials(ceramic tiles, wallpaper or paint).

Required tools:

Hammer or drill.
Level.
Roulette.
Screwdriver.
Sandpaper.
Putty knife.
Drywall knife.

It is recommended to start work on building a box with your own hands from the floor. Using a tape measure measure out a piece of profile, cut off its length and place it evenly on the floor. Make holes in the floor through the profile with a drill into which to hammer dowels.

Before attaching the profile to the side walls, its location must be determine using a level. To do this, the profile is placed along the edge of the piece attached below and aligned. Use a pencil to mark the line along which the profile will need to be fastened.

If the box is solid, then between the side sections of the profile it will be necessary to install longitudinal ones, to which drywall will subsequently be attached.

After all profiles have been installed, access them sheets are attached. To do this, measure out the required piece, cut it with a knife and fasten it with self-tapping screws. The step between the fasteners must be at least 20 centimeters.

Seams between sheets of drywall sealed with putty and reinforcing mesh, which prevents cracks from appearing at the seams. The opening left for free access to the pipes can be closed with a pre-purchased special hatch with a magnetic lock.

After completing the installation of the box, you can begin lining it. An inexpensive and quick finishing option is painting the box in the color of the toilet walls, water-based or oil paint. You should first remember to putty the finished structure. However, it should be kept in mind that from time to time you will need to do redecorating, renewing the paint.

The most durable option for finishing a false wall is application ceramic tiles. This is quite expensive, but at the same time the most common method.

Lining the box with ceramic tiles

To lay the tiles you will need:

First of all adhesive composition is being prepared, with which the tile will be attached to the structure. To do this, the dry mixture is added to water in small portions and stirred with a mixer. The resulting solution should have a medium consistency, that is, not too thick and not too liquid.

Laying tiles starts from the floor. At first the lath is placed and leveled, and then tiles are glued over it.

To attach a tile, inner surface using a spatula is necessary apply adhesive mixture and distribute it evenly. The tile is then leaned and pressed slightly against the wall.

Between tiles it is necessary insert plastic crosses, leaving a gap of 2–4 millimeters thick. Subsequently, it will need to be rubbed with a special mixture for tile joints.

How to cover pipes with plastic panels

Installation of plastic panels is simple and cheap way closing communications in the toilet. Plastic is a flexible and lightweight material, it is easy to use and has an affordable price.

Panels are attached to the frame, which is constructed from metal profiles or wooden slats. A starting F-bar is installed on the frame using self-tapping screws, into which pieces of the panel cut to the required size are inserted.

Each subsequent panel must be connected to the already installed one using the lock located on the edge of the strip. Long panels in the middle part are desirable additionally fasten with self-tapping screws.

To hide corner turns and edges of sheets, it is recommended to use additional corner profiles, baseboards or starting line. The joints of panels that are close to sources of moisture can additionally be treated with silicone.

How to close the pipes in the toilet with roller shutters

Installing roller shutters is a more practical way, as they provide easy access to the pipes. They can be mounted in separate blocks or on the entire wall.

However, installing roller shutters is quite complicated.

Required tools and materials:

installation kit for roller shutters;
fastening material;
roulette;
level;
drill.

Before starting work on installing roller shutters, the walls in the toilet must be leveled so that the distance between them is the same.

Roller shutters are installed into the structure from steel profiles , the distance between which should be equal to the width of the roller shutters.

When installing roller shutters, first of all guides are installed. Then the upper box is attached, to the drum shaft of which the lamellas are attached.

Having installed the last lamella, the structure must check for closing and opening. It should be taken into account that the lamellas must be located in the grooves of the guide strips.

Since for installing roller shutters experience required, then it is best to seek help from a specialist.

When solving the problem of closing pipes in a toilet, it is necessary to take into account that the functional component must be harmoniously combined with the design of the room. Instead of installing the structure yourself, you can buy and install it special decorative boxes designed to hide pipes. The choice depends on the area of the room and how toilet room pipeline has been laid.