How to make homemade machines and devices for your home workshop. Do-it-yourself homemade machines: component materials Homemade machines and equipment

It's nice to see when a person made everything and other household items with his own hands. To simplify the process of cutting metal or sawing elements from wood, they build homemade machines and devices for the home workshop. This solution saves not only time on manufacturing products, but also money on purchasing ready-made ones. Several practical and interesting options Let's look at it below.

DIY pipe bending machine

Read in the article

How to use homemade machines and tools for your home workshop

The use of homemade machines and devices for the home workshop is aimed at solving several problems:

• Simplifying the metal processing process. When creating household items, a metal cutter or press is often required.
• Improving wood processing. Even to build small shed or make it wooden, others are needed.

Buy ready-made tool quite expensive, so the use of homemade machines and devices for the garage is becoming more and more relevant every day. Among the most common options home tool highlight:

• carpentry workbench;
• device for quickly sharpening knives;
• device for sharpening metal drills;
• drilling machines;
• press;
• cutting disc machines.

Here are a few photos of do-it-yourself tools and devices from “homemade” people:

1 of 4

Practical DIY tool shelves

Before creating devices and with your own hands, determine the storage location of all devices, so that later you do not have to search throughout the workshop or where everything is. It’s not difficult to make a shelf for tools with your own hands; the main thing is to decide on its dimensions and material of manufacture.

The easiest way to make shelves is to assemble them from wood. Do not forget about the need to coat the finished structure with a protective varnish or to prevent rotting and swelling of the wood.

You can create a combined version from a metal support and wooden shelves. Here detailed instructions to create such a homemade model:

Image	Sequencing
	Assembling the frame. To do this, prepare two side frames consisting of 4 corners. Connect the elements using . Then, tighten the 2 frames together using 4 corners.
	When the frame is completely assembled, proceed to making the shelves. They can be made from wood or metal, as well as from other dense materials at hand. It is enough to cut the canvases of a suitable size and attach them to a metal base.
	If desired, you can make the rack movable by attaching four small wheels. Or install it firmly in a designated space in the garage.

You can find others interesting projects and drawings for making tool shelves. Watch the video on the topic:

And also do it yourself useful devices for household:

1 of 4

We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples

Among the common do-it-yourself devices is a workbench. Durable and dimensional, allowing you to securely fasten the workpiece, useful for high-quality cutting of wood and creating various elements from it.

The device package includes:

1. Working surface. Hard is used for it to increase the service life of the device. The thickness must be at least 6 cm.
2. Supports. Collected from wooden beams or metal plates. the main task– ensure stability of the entire mechanism.
3. Vise for securing the product. If the table is long, you can install two vices at once.
4. Tool box. Useful recess or retractable design, providing quick access to necessary small parts.

To assemble a carpentry workbench for your workshop yourself, you should choose a drawing and purchase materials for the work.

DIY carpentry workbench drawings

Before purchasing materials to assemble your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself; it is advisable to note the dimensions of the materials used and their quantity.

For example, finished drawing A DIY folding workbench may look like this:

Whatever model you choose to create, take into account several features of the workbench that ensure ease of cutting wood:

• height and length of the master’s arms: the height and width of the tabletop depend on these parameters;
• which hand is working: place the vice on the right or left;
• what blanks will be made: choosing the shape of the table;
• how much space in the room do you allocate for the workbench?

Taking into account all these parameters, it will be easier for you to decide on the drawings of the carpentry workbench and the dimensions of the machine. Here are a few interesting examples:

Instructions for assembling a wooden workbench with your own hands

You can buy a wooden workbench in a store or through online catalogs, but it’s cheaper to make it yourself. Let's take as a basis a simple option with standard sizes tabletops: length – 150-200 cm, width 70-120 cm.

The manufacturing work will include several stages:

Image	What need to do
	Make the top cover from thick ones to make a shield with a width of 70 to 200 cm. Fasten the elements with long nails, and you need to drive them in from the outside and carefully bend them from the inside. The working surface of the workbench is made only of wood or.
	Sheathe the lid along the lower perimeter with a 5 by 5 cm beam. This will make it more convenient to attach the vertical supports. The location of the supports depends on the size of the tabletop. It is better to make them from thick rectangular timber at least 120 by 120 mm.
	The carpentry workbench must be installed correctly. Be sure to secure it firmly. If it will be mounted outdoors under a canopy, dig holes for supports. Indoors, use other fastening methods.

When the structure is assembled, install a vice on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:

Making a carpenter's vice for a workbench with your own hands

Professional “homemade workers” assemble not only tables for work, but also vices with their own hands according to drawings. Any design of such a clamp will include several elements:

1. Supports, where each one has a sponge for clamping.
2. Moving jaw.
3. Metal guides. The sponge moves over them.
4. Lead screw for moving elements.
5. Collar. Necessary for rotating the screw.

When making a homemade vice with your own hands, you can use various available materials. For example, there is a design option from profile pipe. To do this, prepare several pieces of pipe different sizes, steel stud with coarse thread and double nuts.

Instructions for creating a bench vise from a profile pipe:

Image	What need to do
	The largest pipe acts as a body. Supports are soldered to it from below. A 3-4 mm steel flange is put on the back side. A hole is drilled in the center for running nuts, and opposite the front support there is a rear sponge.
	There is a front steel flange on the internal moving part. A stud is mounted in it, with lock nuts attached to it. Thrust washers are placed on both sides of the flange. The last element is a movable tube attached to the front jaw.

And also watch the video “do-it-yourself vice at home”:

DIY metal workbench drawings

A metal workbench does not differ much from a carpenter's workbench. The base is hard metal, not wooden frame. A vice is attached to it, and the entire workbench is designed to withstand the force of a sledgehammer.

Do-it-yourself metal workbenches can have one, two or three cabinets, and also not have shelves and drawers for small parts. In terms of strength for working in a garage, you can make regular table made of metal up to 5 mm thick and reinforced structure, where sheets from 10 to 30 mm are applicable.

Here are some useful drawings for making metal workbench for your workshop:

How to make a device for sharpening knives with your own hands: drawings and photo examples

No home is complete without a knife in the kitchen. It is quite difficult to do it correctly without special devices: it is necessary to comply desired angle and achieve perfect sharpness blades.

For each knife, a certain sharpening angle must be observed:

1. A razor and scalpel require an angle of 10-15⁰.
2. Knife for cutting bakery products – 15-20⁰.
3. Classic multifunctional knives – 25-30⁰.
4. For hunting and hiking, take a device with a blade angle from 25 to 30⁰.
5. If you want to cut hard materials, then sharpen at an angle of 30-40⁰.

To ensure the desired angle, it is worth buying or making a sharpening device. For example, you can assemble a sharpener with your own hands.

A comment

Tool selection specialist at VseInstruments.ru

“If you don’t use sharpening every day, then 1000 rpm is enough for a high-quality result and long term operation of the device."

To assemble such a machine, you will need a motor from a washing machine with a power of 200 W. To create a sharpener from an engine, prepare:

• the motor itself;
• metal for the casing with a thickness of 2 to 2.5 mm;
• flange tube;
• sharpening stone;
• nuts;
• trigger mechanism;
• cable for connecting to the electrical network;
• corner made of metal or wood for the frame.

You can watch a step-by-step description of the manufacture of the machine in the video:

There are simple sharpening machines with your own hands without engines. For example, you can make a device from bars. To do this, prepare two abrasive stones of the same size and a sharpening stone.

The progress of work on creating such simple device will be as follows:

• Sand the wood blocks sandpaper, removing burrs. Make markings depending on the desired angle.

• Attach a stone to the drawn line to give the blade a sharp edge. To do this, attach it to the block and mark its width. Then, make cuts on the markings, up to 1.5 cm deep.
• Attach abrasive stones to the resulting recesses so that the grooves coincide. Then, install the sharpening stone by screwing it onto the bolts.

There are many ways to make a homemade knife sharpener. Choose the one that suits you and try to create a convenient and useful tool for home.

How to make a device for sharpening a metal drill with your own hands

They make their own not only a sharpener for blades, but also a machine for sharpening drills for metal. Here are a few drawings useful for work:

To understand how to assemble correctly according to the drawings own machine for sharpening drills, watch the video on the topic:

The simplest and most common version of such equipment for a garage is a converted drill. To work you will need:

• base frame;
• rotation mechanism;
• vertical stand.

For the rack, they usually use either boards. The drill is lightweight, so there is no need to use metal. In this case, the frame must be made massive in order to reduce vibrations during operation of the device.

To properly connect the frame and vertical stand, and also assemble all the equipment into one whole machine, pay attention to the video instructions:

DIY drawings with dimensions for a drilling machine

To correctly make any machine or practical device for private use, you should first make a drawing with dimensions. Only then begin preparing materials and assembling the device.

Here are some examples of do-it-yourself drilling machine drawings from a drill:

Article

DIY making various crafts, furniture, do-it-yourself repair cars are popular not only because of the innate ability of our people to create. This is also a good saving for the family budget.

However, such a hobby requires special equipment. Every home has basic hand tools, including electric ones. Drill, screwdriver, grinder, manual Circular Saw, jigsaw.

These devices make work easier home handyman, but with their help it is impossible to perform work professionally. The home workshop should be equipped with compact machines.

Review of homemade machines for the home workshop - video

Such equipment is offered in abundance by specialized stores.

Having equipped workplace With such an arsenal, you can make anything you want. But the high cost of the tool negates the savings in the production of crafts.

There is only one thing left - to make the machines yourself. Homemade equipment can work no worse than factory equipment. In addition, constructive know-how can be contributed to expand capabilities.

Homemade machines for a home woodworking workshop

Wood lathe

It can be made from existing tools. Enough strong table, or just a massive board mounted on legs. This will be the stand.

A clamping spindle is not necessary for wooden workpieces. As well as a separate drive motor. There is a simple comprehensive solution- electric drill.

If there is a speed controller - generally great. Fixed in the cartridge feather drill on wood. It needs to be modified: sharpen the working edge in the form of a trident.

The next required element is tailstock. In metal lathes, it is necessary to support long blanks. When processing wood on a machine without a clamping spindle, the tailstock is a locking element. She presses the blank against the trident and supports it on the axis of rotation.

Typical tailstock design in the illustration.


The cutter in such a machine is not fixed in the support. Wooden blanks are processed with a hand chisel, which rests on a tool rest.

Everyone knows that a good owner must have his own home workshop, in which it is necessary to install equipment to perform various types works Some machines and devices can be bought, and some can be made with your own hands. Homemade machines and accessories for the home workshop are a source of pride for the craftsman.

Of course, it is impossible to predict what exactly may be needed at a certain moment, so let’s look at the most basic ones. That is, such homemade devices for home workshop which will be needed in your workshop and garage the most.

Today there are a huge number machines and devices, many options for such devices can actually be made with your own skillful hands. Particularly talented ones design machines with a wide range of functions.

Let's give an example. From the most ordinary drill, you can make a device for the home workshop, which can be used as:

1. Circular saw;
2. Grinding machine;
3. Like a sharpener;
4. Lathe;
5. Cutting machine.

Let's now start making homemade machines for the home workshop from a drill. First of all, you need to secure old drill on the bed, you can attach the drill to the board, using it instead of the bed. In this case, the thickness of the board must be at least 25 mm.

The place on the table on which the homemade machine will be placed should be selected taking into account the size of the sharpening stone, cutter, circular saw blade or grinding wheel.

To secure the drill, you should only use a threaded rod with a dead-lock nut, and you should also use an epoxy mixture. Supplement the fastening with a pin 2 mm in diameter for rigidity. The basis for a machine with many functions is ready.

Everything will be useful on the farm

The circular saw is very easy to make from a regular hand-held circular saw from the store. It should be attached to a pre-selected frame and secured to the frame. True, so circular saw will not pull very heavy loads, but will be excellent for home use. And you can make such a machine absolutely individual, suitable for your height for convenience, so that it is comfortable to stand and work at it.

Homemade products for the garage and the home craftsman can be completely different. A pipe bender will definitely come in handy for the home craftsman. It's no secret that thanks to a pipe bender you can bend pipes from any metal. Why bent pipes? They will be needed in the construction of greenhouses, greenhouses, installation of steam heating and much more for what the inquisitive and inventive mind of the master will come up with.

To design the most simple type A pipe bender should cut one edge of the board in a semicircle. This workpiece must be attached to a very stable surface. And be sure to attach the restrictive part. It should be located at a certain distance from the wooden piece; it is into this space that the desired end of the pipe will be inserted.

The real owner's workshop is different in perfect order, therefore, in addition to machines and a workbench, you can make homemade devices for the workshop, where tools, drills, nails, screws and other small things will be stored.

To the masters of the catch

Fishing enthusiasts, like other men with “golden hands,” should also have their own workshop. A fisherman’s workshop is a different world, and the homemade products that are created here with your own hands are also different. After all, they make weights, balancers different types, wobblers and even tackle for a good catch. Therefore, especially for our fishermen, who invent and make various homemade products and devices with their own hands, spending hours in their home workshops, we will tell you about the process of making a wobbler.

A wobbler is the most popular bait, according to experienced spinners. Wobblers can be made from either foam or wood. The manufacturing process is as follows:

1. You should cut the workpiece into a shape that resembles a small fish.
2. We install loops for attaching tees.
3. After installing the hinges, coat the workpiece with varnish (necessarily waterproof) and dry for 10 hours.
4. After drying, we hang the tees on the workpiece.
5. We lower the new wobbler into the water and install weights on it, with which you can select the optimal level of buoyancy.
6. To give the wobbler its own mobility, you need to glue in a blade, with the help of which it will independently “play” on the water.

All that remains is to decorate it to your liking. It will be special, because you made it with your own hands, and when fishing, such a wobbler will definitely bring good luck in the form of a big catch.

“You can never have too many tools” - everyone who has been involved in construction or making something has heard this phrase. The right tool is invaluable when you need to saw something off, weld it, or connect parts. The section on FORUMHOUSE about homemade machines and devices, which is called that, is constantly updated with new products that simplify and optimize the work of a builder or a “jack of all trades.”

We have already told you, and... Let's continue the topic we started. Today we will talk about homemade turning, plumbing and even gardening tools and devices for construction.

Grinder cutting machine

Workshop machines are always in demand, but angle grinders Grinder), popularly “grinder”, one of the favorites in the arsenal of any home craftsman. But the instrument requires a very careful attitude, because any neglect may result in serious injury. Therefore, when cutting large volumes of metal (when making a fence or cutting reinforcement), many people prefer to work with a metal cutting machine.

You can buy a stand for an angle grinder online, but to save money, cutting machine you can make it yourself, from an “unnecessary” or “superfluous” “grinder” on the farm, which almost every owner has country house. As we'll see, it's good for more than just sharpening garden equipment!

Ivici FORUMHOUSE user,
Moscow.

I have an angle grinder weighing 5.5 kg. One day I thought about how to make it easier to use. After all, working with it, moving all the time, is inconvenient - your hands get tired quickly. I decided to make a convenient cutting machine from what I had.

Looking ahead, let's say that the machine (more precisely, its second modification) was a success: it cuts smoothly and without distortions.

Ivici I made it like this - I took a piece of channel No. 6.5 (65 mm wide and 36 mm high). This is the basis of the machine.

A steel strip of 50x5 mm was also required. With its help the angle grinder is secured. A 4x2 cm profile and a three-millimeter piece of steel were also required. A figure eight bolt serves as a turning axis.

In the first version of the machine, a powerful door hinge. But, due to welding, under the influence high temperature, all the lubricant in the loop has burned out, and a backlash has appeared in the assembly.

According to the user, the most difficult thing was to accurately mark and drill three holes with a diameter of 14 mm for attaching angle grinders with bolts to the threaded holes intended for installing the side handle.

To do this, I had to use a stepped (conical) metal drill.

I also had to work with a round file. A small bore of the holes, due to the backlash, allows you to move the angle grinder a little during the assembly process and accurately install it. After all the parts are ready, the user welded the piece of hardware holding the angle grinder together, assembled the entire structure in rough form, checked all the corners and, making sure that everything was mounted as it should, finally welded the entire structure.

Ivici

The machine is attached to the support table (a piece of slate 1 cm thick) with six self-tapping screws. You can dispense with the return spring, just tighten the axle bolt more tightly. There are no backlashes or distortions when cutting the workpiece. You can also cut at an angle of 45 degrees.

Another homemade machine from an angle grinder was suggested by a portal user with the nickname Bistok.

As usual, at first we start a small construction project or renovation, then we realize that we need new ones Building tools and devices, and then the search for the most optimal solution begins. Well, don't buy it!

Bistok User FORUMHOUSE

I decided to make the stairs out of metal. To avoid defects, backlashes, and discrepancies, maximum precision is required when cutting metal parts. Therefore, I decided, using an angle grinder as a basis, to make a sawing machine.

Everything that is usually lying around in the home workshop (and it would be a pity to throw it away) of a zealous owner went into action, waiting for its finest hour. As a stand for a cutting machine Bistok I used an overlock table.

The swivel unit is made from the hub from the “nine”, because it has a bearing.

As in the option described above, the most difficult thing was to “catch” the right angle between the cutting disc and the stop angle. After all, the accuracy of sawing metal depends on this unit.

The end result is clearly demonstrated by the photo below.

To turn on the grinder Bistok I made additional wiring - I brought out a regular switch and socket, and an extension cord comes from this switch.
You can buy a homemade machine from a craftsman you know, but it’s much better to upgrade to a creator of devices of this level!

Bistok

I got a portable machine. I welded a corner to the handle to get 3 support points for the angle grinder. The fastening with two bolts was adjusted to the location. I work only in safety glasses. I am very pleased with the result of the work done. I didn’t buy anything extra to make the machine. The cut is exactly 90°.

Budget drilling machines

In addition to cutting machines, various devices for drilling holes in metal are popular. Starting from stationary drilling machines and ending with devices in which regular drill, as a “driller” of FORUMHOUSE user with the nickname g8o8r8.

g8o8r8 FORUMHOUSE Member

While drilling many similar holes in thick metal, in order to relieve my hands, I made a simple device based on a clamp welded to a metal support and a pair of clamps to firmly fix the drill. Now drilling a corner or channel has become much easier.

According to the user, drilling 1 hole with a diameter of 4-5 mm takes no more than 30 seconds. Having decided to repeat such a design, you should remember that the load on the drill increases significantly due to the increase in the volume of work. g8o8r8 I've already rebuilt my drill twice.

Also, the user, based on an electric motor, made a small “vertical” machine for drilling holes with a diameter of up to 4 mm in printed circuit boards.

g8o8r8

The long spindle compensates for the inaccuracy of the bearing race groove. For amateur use, this machine is quite suitable. Drilling accuracy remains at an acceptable level.

In case of absence welding machine You can assemble the device you need on the farm using bolted connections.

Hand trowel for concrete

No less important than homemade machines for the home workshop are devices for construction and repair. And we can easily make many construction devices with our own hands.

Anyone who has ever dealt with concrete work knows how difficult it is to smooth a freshly laid mixture to perfection. If on small areas you can get by with the rule, then when filling the area in front of the house or parking lot, ordinary tool not enough. A concrete trowel comes to the rescue, which, due to its long handle (from 3 to 12 m), allows you to smooth concrete over a larger area without stepping on the surface being leveled.

The principle of operation of such a device, somewhat reminiscent of a mop, is simple. There is a working profile (also called a “wing”), attached to a long handle. When moving away from you at the ironer, due to the gearbox, the edge opposite to the user rises. That is, due to the angle of inclination of the “wing”, the trowel glides along the concrete and does not collect it in front of itself. When moving towards you, on the contrary, the side facing the worker is lifted up, and the trowel smoothes the concrete again.

ronik55 FORUMHOUSE Member

I know from personal experience how difficult it is to smooth concrete perfectly. I didn’t want to go and buy it for 10 thousand rubles. As a result, my father made a cheap device for smoothing concrete, practically from garbage - all sorts of unnecessary things.

The following photos clearly demonstrate how this ironer works. Let's take it metallic profile(dimensions depend on the area being smoothed), we weld transverse stiffeners to it, on which, in turn, hinge joints made of pipes are fixed.

Most main element, due to which the angle of elevation of the “wing” changes, this is a rotating gearbox with a chain.

When the handle was rotated, the chain was wound around the pipe, and one edge of the smoother was raised.

Having carried the stroker to the end point, we rotate the handle in reverse side. The chain is wound again, and the edge of the smoother is raised, facing the user.

We pull the ironing iron towards ourselves and repeat all the steps until we finish the job.

ronik55

Due to the “pipe-in-pipe” connection and fixation with a cotter pin, you can increase the length of the handle at your discretion. This design is easy to assemble yourself.

See how to make it yourself (follow the link and you will find a drawing).

Garden sprayer and clamp

It all started with Metamorph it was necessary to treat the area against ticks, and the old manual sprayer had given up its life. There was an urgent need to buy a new device or find a replacement for it. While preparing for processing and thinking about what could be done, a user of our portal came across an unnecessary fire extinguisher lying around the household.

Next, we proceed as follows - carefully unscrew the fire extinguisher, pour out the remaining powder and rinse the cylinder with water. Instead of a bell, we screw in an adapter into which, depending on the need, you can screw in a nipple (for pumping air) or a nozzle (for spraying the mixture).

Metamorf FORUMHOUSE Member

Using a homemade sprayer is very simple: fill the fire extinguisher halfway with a special spray liquid, then pump it with air, screw on the sprayer and go poison the ticks.

DIY carpentry tools

QWEsad FORUMHOUSE Member

One day I needed to glue together a lot of wooden panels. I didn't have any clamps. Therefore, I decided to quickly assemble a clamp from wooden blocks with a cross-section of 5x5 cm and metal plates with welded nuts in “tens”.

In total, the user made 3 of these wedges; this was enough to glue a wooden board measuring 1.5x1.7 m and 18 mm thick. To prevent the bars from sticking to the workpiece, under those places where there is a seam and glue may protrude, you can put a newspaper or shoot polyethylene with a stapler.

In order not to spoil the workpiece, you need to place a gasket under the plate into which the screw rests. The gluing width is adjusted by moving the stop bar.

To keep your home comfortable and convenient, sophisticated technology is required. It greatly facilitates household work, but its maintenance requires certain skills and knowledge. Not everyone knows all the possibilities modern instruments and they are not used to their full potential. If you change them a little, you can get convenient homemade tools for the workshop.

If you gradually acquire models from popular brands, they will turn out to be durable and reliable assistants. In addition, devices are needed for positioning and securing workpieces during processing. It will be at the dacha

As the home craftsman's inventory accumulates, it should be sorted into groups:

• plumbing and carpentry tools;
• devices;
• electrical equipment.

Drawers and cabinets allow you to place everything. Keeping equipment clean and tidy makes it possible to create a comfortable working environment and ensure long-term preservation of tools.

Homemade tools for woodworking

Wood processing is most common in household. Useful homemade tools for the workshop primarily include a workbench. It should be at a comfortable height. Its lid is located at the level of bent palms. If you need to raise it, bars of the required thickness are installed on the dowels below.

Making a modern workbench

The classic workbench consists of a lid with front and rear vices. This design is more suitable for manual work. It is poorly suited to working with power tools due to the fact that workpieces can be difficult to secure. You can buy a modern compact workbench MASTER cut 1000 worth 12 thousand rubles, which folds up. You can install hand tools on it: a circular saw, a jigsaw and a router. But then it will have to be redone. Good characteristics has a Festool MFT 3 workbench. However, the price of 30 thousand rubles makes you think. The master will be able to make homemade devices for the home workshop that work just as well.

To make a workbench you will need flat plywood without knots. The thickness must be at least 20 mm. By installing a jigsaw on it from below, you can cut boards and small bars along, across, at an angle, as well as complex curved profiles. The tool performs additional functions circular and band saws.

First, the tabletop is made. An arc-shaped groove is cut into it to install a guide for workpieces, which can be mounted at any angle. A guide with a slot is also made under the jigsaw. Its width is selected to match the size of the tool sole.

The sides should be cut out of plywood and glued to the tabletop to give it rigidity. The legs of the workbench are made of timber. Can be made metal carcass, and then attach the tabletop to it with screws. Then the structure will be light and durable. The guides from below are attached to the tabletop with furniture nuts.

The jigsaw is installed from the bottom of the workbench lid - “upside down”. Only the file remains visible from above. For ease of use of the jigsaw, an additional switch is installed. The guide should also be easy to remove so that the tool blade can be easily replaced. For easy access to the underside, the tabletop can be made folding and hinged.

The workbench takes up little space and can be installed even at home. To do this, it is made foldable so that it can be easily disassembled and stored in a closet or pantry.

How to make a workbench for a summer house

For work in the country or in country house you need a powerful workbench. The table top is made from thick edged boards up to 2 m long. It will not be superfluous if it is additionally secured with self-tapping screws. The bottom perimeter of the table top is sheathed with timber. The table legs are made with a square section of 120x120 mm. They can be buried in the ground or attached to a reinforced concrete base. The entire structure is treated with an antiseptic and covered with drying oil.

When the workbench is installed, do-it-yourself devices are mounted on it: guides, devices for fastening workpieces and power tools.

How to make a pipe bender with your own hands

In a subsidiary farm it is necessary to have a bending device metal pipes and profiles. simplest homemade instrument for bending pipes with a diameter of up to 20 mm - this is a steel plate with welded pins. By inserting a workpiece between them, it can be bent to the desired curvature. Such simple devices the pipe is crushed at the bend. To prevent this from happening, you need to fill the pipe tightly with sand. Warming it up will also help. blowtorch, which any master has.

To improve the quality of bending, instead of pins, 2 profiled rollers and a locking element are used. You can also make a special profile from a steel angle and plate and fix it on a workbench that has solid foundation. In the picture, the structure is attached directly to the boards. You can make it portable by mounting it on a steel sheet and securing it to the bottom of the tabletop. Then the pipe bender, which has to be used quite rarely, will not interfere with carpentry work. The portable device, like other homemade workshop tools, can be used in the garage. It is convenient to secure it there, and it may be needed not only for pipes.

Homemade circular saw

Branded machines have high prices, but for a private user, a homemade tool for a home workshop is quite suitable. It can be made on the basis of manual, cheaper models.

The workbench for the circular saw must be stable. A frame with a slot for a disk is attached to the tabletop. The best material is a sheet of metal or durable wood that can withstand heavy loads. It has a slight thickness, which makes it possible to use most disc and cut products of sufficient thickness. In addition, the tool itself and the attachment for the machines are attached to the frame. The guide bar is made to slide on a steel or aluminum slide, or fastened with clamps.

Installed from the bottom of the tabletop on the frame. You can also use a grinder or drill, but they are not as effective and do not allow you to use the entire working area of ​​the disk. The fastening can be anything as long as it is reliable.

When working with circular saw It should be remembered that it has high speeds and safety rules must be followed.

Homemade bow saw

Homemade woodworking tools can be very simple yet effective. These include a bow saw. The thin blade makes it possible to quickly cut big log. It is easy to replace it with a new one when the saw becomes dull. You can make your own bow saw from 3 blocks of durable wood. Two handles with cuts at the ends are connected in the middle by a crossbar using a “tenon-socket” connection. The blade is inserted into the slots and secured with two nails. On the other hand, it is tensioned using a rope loop thrown over the handles and twisted with a knob.

How to sharpen a knife

Hand sharpening for knives is more effective because it produces a strong cutting edge. To facilitate the process, it is widely used homemade device. It consists of a bar with a clamp for the bar, a base for fixing the knife and a stand for adjusting the installation angle.

When the rod with a bar attached to it moves back and forth, the blade is sharpened. The abrasive surface is pressed against the blade only when moving from the heel to the tip. By slightly changing the design of the knife sharpening base, you can also straighten the blades of carpentry tools.

Homemade garage gadgets

A garage is not only a place to hide a car, but also a workshop where you can store tools and carry out repair work.

Shelves and racks

Provide the equipment with your own hands. To do this, a rack is made, which is usually placed on top. Then it will not interfere with movement inside. A small workbench is installed below, in which tools are also stored. It is most convenient to place everything near the back wall of the garage. Then the side passages will be free.

The inspection pit is lined with bricks or concrete is cast, and then covered with a lid so that it does not interfere with the passage.

Making a puller

Normal work on a car is done using a standard set of tools. Craftsmen make special equipment. A puller is often required to pull bearings together. The most convenient is the three-valve design. A standard device may not be enough. If you make a puller with your own hands, it will last for many years.

Small devices are made from steel sheet 10 mm thick. A pattern is drawn on it and the legs are cut out with a gas cutter. They are processed on an emery machine, adjusting the dimensions. The core is turned out of round timber, the claw holders are welded, threads for the knob are cut and the necessary holes are drilled. The legs are held on by bolts with a diameter of 8-10 mm.

The job of making a puller requires skill with many tools. Helpers may be needed here. A convenient solution is to make removable feet required configurations, which can be changed on a product purchased in a store.

Conclusion

Homemade tools for the workshop allow you to solve many problems in the home and farmstead with minimal effort and expense.