Bed for the newborn from plywood. DIY crib: step by step instructions with photos. Step-by-step instructions for designing and installing skids

The birth of a child is a significant and joyful event in almost every family. However, at the same time, this is the various chores associated with preparing the necessary space for a newborn baby. This primarily applies to the sleeping place. Few can afford to buy a newborn bed, given today's prices.

It must be remembered that the crib must be stable and safe for the child.

But there is Alternative option, which will save money, is a do-it-yourself crib for a newborn. And if you approach this matter very responsibly and with knowledge of the process itself, you will get a bed no worse than purchased in a store.

How to start the creation process

Everyone knows that children never sit still. Therefore, the children's room should be the safest place in the house. Those. it is necessary to exclude objects that can injure the baby (for example, a nail that has not been hammered to the end or an ordinary screw).

Must be stable and safe for your child.
Crib size chart for a newborn.

In addition, it is desirable to equip it with a removable sidewall (the so-called decorative side). This will help the child himself, without the help of adults, climb into his bed.

What will be required during the construction process? This:
electric drill and drills;

milling cutter (can be manual);

plane;

rasp;

roulette;

square;

hacksaw;

pencil or marker;

hammer;

level;

wyma (glue blanks);

brush;

screwdriver

From building materials:

nails and screws;

epoxy adhesive;

plugs for furniture;

plywood sheets;

corners for connecting parts of the crib;

children's mattress;

stain, varnish;

edged board (4 cm) and bars (3x5 cm).

Back to index

Construction process for the construction of a crib for a newborn

Drawing of a bed for a newborn.

Before proceeding with the installation, you must purchase a children's mattress. After all, it will depend on him what size the bed itself will have.
for a good rest of the child, it is desirable to build in size 120 × 60 cm (and not crowded, and very convenient). As for the height of the sides from the floor itself, it is 8-10 cm, the height of the back of the crib is 110 cm. The lower position of the bed of the crib from the base of the floor is determined taking into account the safe height. Since the bed, originally designed for newborns, will be used in the future (up to about 4 summer age), then the height should be about 30-35 cm;

the distance between the bars of the crib for a newborn should be 10-12 cm. This is necessary to avoid that the child cannot stick his head between them (which can happen later, no one needs to explain).

Back to index

Parts manufacturing

The strapping for the backs and transverse sidewalls is made of coniferous boards.
The material itself must be processed with a planer or with a woodworking machine. In this case, the thickness will be 3.5 cm, and the width 7 cm.

To make a frame, you need to take bars (section 3x5 cm) in the amount of 6 transverse and 2 longitudinal.

Using a tape measure, points are marked with equal intervals between them on long bars.

Then this frame is compiled, a drill is taken and at the joints are made through holes in which you need to insert spikes (you can use ordinary wooden wedges). In this case, for more reliable fasteners, you can use glue, which is applied to the joints. Do not forget to check the design with a square.

Frames of backs of a children's bed for the newborn.

Here you need to take 4 long bars and 4 short ones. Moreover, each of them should be the same size (110 cm and 60 cm, respectively).

2 pairs of designs are made. Those. 2 long for 2 short products (in the form of "P"). In this case, all the bases of the bars should be in the same plane. The height to the lower crossbar is 30-35 cm. Fastening occurs with the help of nails or spikes;

then 10 bars are taken (length from bottom to upper crossbar). These elements will serve as a "grid". Marking is done along the upper and lower crossbars, 5 points for each. Bars are inserted at these points (5 for each back).

With the help of a drill, through holes are made into which spikes are hammered. The backs are ready.

Rod manufacturing

For these purposes, slats with a cross section of 2 × 2 cm (oak or beech) are used. Quantity of products - 22 pieces (11 for each sidewall).

with the same drill, holes are made at each of the ends of all the rails. With the help of a tape measure, the same segments are measured on the prepared frame and are also drilled;

then 2 more beams are taken (along the length of the crib for a newborn) and holes identical to the previous ones are made in them in the same way. Notches for spikes are also required from the ends.

Preparing for the appearance of the baby, future parents have to incur considerable expenses. Children's clothing, diapers and diapers, an envelope for discharge, a blanket - you can list for a long time. Perhaps one of the most expensive purchases is a crib, which is difficult to do without. But sometimes money is completely back to back, and you have to look for a cheaper, but high-quality option.

Trying to meet the minimum amount, you can use two methods: choose a new model from inexpensive cribs or look for a used quality crib.

Cheap baby cribs

In this case, you should think about products Russian companies- it often costs an order of magnitude cheaper than imported ones. And we will select a simpler model - without any "bells and whistles". The usual classic version of an inexpensive crib for a newborn is quite suitable - the main thing is that the product is made soundly, using safe materials.

Note that the cheapest cribs are usually pine. Their disadvantage is the softness of wood, which a child can gnaw. But this breed contains extremely useful phytoncides.

Experienced parents identify three leaders among domestic manufacturers of budget cribs:

Company Kubanlesstroy (Lel) producing highly durable and beautiful products, and from beech wood, which is considered the strongest. The beds of this company have delicate flower names: "Cornflower", "Buttercup", "Lily of the valley". The price of their cribs for newborns starts at six thousand rubles.

Company Mozhga (Red Star)- a well-known manufacturer of furniture for children, engaged in this business for more than a hundred years. Inexpensive beds at Mozhga are mostly birch, they cost from five thousand rubles.

brand products Gandylyan They are distinguished by their attractive and diverse design, streamlined shapes, and reliable assembly. They, like the previous ones, are able to withstand not one baby, but several. The cheapest products will cost from six thousand rubles.

Budget cribs from manufacturers (photo)

Crib Mozhga

But in Lately new manufacturers of baby cots for newborns appear on the market with good reviews. For example, an enterprise Vedruss from the city of Sergiev Posad. It makes beds for 4 with a little thousand rubles. And near Arkhangelsk there is a company SKV-Company, which produces even cheaper products - a little more than two thousand rubles.

And the Swedish-made crib can be called the leader at the lowest price. Most simple model"SNIGLAR" from IKEA will cost two thousand rubles.

Purchase from hands

Do not overlook the option of buying a used baby crib for newborns. Moreover, he sometimes allows you to buy an excellent foreign children's bed inexpensively: for mere pennies. It can be a product of a well-known brand (for example, Italian, Spanish, French), which is distinguished by excellent quality and great design. And the fact that it has passed the test of time will even benefit. So you will know for sure that the crib is strong enough and reliable. In addition, for the minimum cost, you can manage to buy, for example, a practical transformer or a high-quality crib for newborns.

Baby crib for a newborn

It is especially successful if such an acquisition is made with good friends - you can be sure of the seller. However, no one bothers you to check the quality of the item being sold, shaking the sides, pressing on the bottom, looking at how nice appearance after use. And if none of your friends and neighbors offers to buy a crib for a newborn, you can try your luck on sites with free ads. Many mothers have purchased cribs in this way and are very satisfied.

There are, for example, resources such as Avito (Avito), "From hand to hand", Where can I buy a cheap baby crib for newborns. Each of them has a convenient sorting by city, product type and other parameters. It is also worth noting the site Babyblog". On it you can not only find used children's things, but also draw a lot useful information. As for the price, you can buy an old crib for a thousand and a half rubles, and even cheaper. How do you agree.

Dads who love to craft will be happy to plunge into fascinating process making a bed for a future son or daughter. This process cannot be called insanely difficult, especially for classic version. To get started, let's pick everything you need.

Materials and tools

If you want round slats, like a store crib, look at a gardening store - you can often find them there. Or you can take rectangular bars for this purpose (1.5x2.5, 2x2, 2x3 cm). The frame - the basis of the sleeping bed - is assembled from bars 5x5 or 7x3.5 cm. The same bars are used to create each of the walls, the continuation of which will be the legs of the bed. Bars 5x3 cm will be needed for the slatted bed. If you plan to make one-piece backs, then stock up on a sheet of plywood 1.8-2 cm.

In addition, you will need fasteners (bolts, screws), and you will also need metal corners for strengthening. You must also buy plugs (plastic) - they will cover the fasteners, which must be recessed into the tree. Also stock up on epoxy glue, as well as plenty of sandpaper- after all, a children's product should be absolutely smooth and strong.

From the tools we will use:

drill (preferably electric);
file;
hammer;
jigsaw;
rasp;
woodworking tool (ideally);
wood grinder;
level and tape measure;
milling machine;
a mechanism that clamps the glued parts.

Blueprints

Here, too, there will be no special problems - the standard size of children's mattresses is 1.2 by 0.6 m. You need to focus on it. It would be very nice if there is already a mattress for the future crib, then it will be easy to make a bottom on it. As for the height of the sides, then optimal size(if you count from the floor level) - 0.9 m. The backs should be slightly higher - by 20 centimeters. And the bed should be 30-35 cm from the floor. Leave 10 cm between the individual crossbars.

The drawing for a crib with your own hands is very simple. But if you want to build a more intricate design, you can turn to specialized magazines or books where you can find drawings of cribs for newborns with sizes. And then someone might want to make a transforming bed for their child, for example.

Technology and manufacturing process

First you need to make frames for the sides and backs (if they are lattice). In the case of solid backs, we cut them out of plywood. It is advisable to fasten the bars with through-type spikes, providing them at the end of each bar. But it is also possible to connect with glue and screws. For the bottom of the crib, we take six bars 5x3 cm. To attach the railing rods to the crossbars, we drill holes with a 16 mm drill.

How to make a crib with your own hands (video):

We glue all the parts to be joined using a clamp. Fastening together the backs and sides of the crib, we use self-tapping screws (from 8 to 10 cm). The legs of the crib can be either separate parts (by the way, you can take it from an old bedside table, for example), or a continuation of the frame design. In the latter case, this must be considered. On request, it is possible to equip the crib with furniture wheels. But then don't forget the clamps! And one more thing: when making the front wall, you can provide for its tilting or a door in it. A moving auto-wall is difficult for a home master.

Having made this simple product, pay due attention to processing.

Sand and rub thoroughly sandpaper all the details so that not the slightest roughness or notch remains anywhere. Close fasteners with plugs. Finish with safe varnishes and paints (those suitable for children's toys are suitable), for example, on water based. And you can do without them altogether by rubbing the crib with wax (ready-made) or special oil for wood.

DIY bed (photo)

Always is crib, handmade the manufacture of which we will consider today. This is an important part not only of saving on materials, but also of showing your parental concern for the welfare of the child. Choosing interesting project and adjusting it to the parameters of both your child and the room in which such furniture will stand, you will be completely sure of its reliability and safety for children's health. In addition, it will also be necessary to dwell on at least important aspects comfortable and safe sleep of the baby - a weightless canopy and comfortable soft sides, which are mounted under any bed model.

DIY crib: photo

Due to its compact size, do-it-yourself crib, photo which you will see in most cases in this article, is a product of little complexity. And there will be relatively few materials for it, and in terms of time, assembly will take a minimum of time, especially if you have the skill to use tools. The motives for doing it may be different, for example, it may be the desire to combine both the desired material and the required shape in one model.

A lot of parents face such a problem, because now on the market there are mainly models using MDF and chipboard, which can only conditionally be classified as suitable for children's furniture. But the models for which solid wood is used often cost simply exorbitant money, and they are designed as if for palaces, they are so huge and non-functional. So for dads perfect solution- study the manufacturing instructions do-it-yourself crib step by step, photo which are on the Web, and proceed with self-assembly.

Another category of parents who fully design and want to see inside, of course, is exclusive furniture, ideally suited in style to the design of the bedroom. Fantasy forms that you can see in the photo above should not confuse you, because in this case there is everything you need to sleep, first of all, a correct and comfortable mattress. Yes, and kids who love fairy tales and everything unusual will surely like this solution in their room. Therefore, to the individual study of the design of the frame (in the form of a car, carriage, boat, elephant) and to ensure that sew a canopy on a crib with your own hands, and then decorate it with applications and patterns, they will react with complete delight.

DIY crib - drawing

The beginning of all beginnings for the formation of the project do-it-yourself crib - drawing. You can find a few examples in the photo below, or you can come up with, use your imagination. It would be useful to use special online programs, which are designed for furniture design, where you can find typical models and understand how parts are cut and assembled.

Any model, from the simplest to must meet several criteria. This is safety, which includes a wide range of criteria, from environmentally friendly materials to the resistance of the legs to wobble. This is also a criterion for ease of use, that is, not only should the child be comfortable sleeping inside, but it should also be convenient for you to put him there and get him out. The structure must be provided with a bracket or other fasteners for the future canopy, toys and mobiles that develop and entertain babies.

For both toddlers and older children, the issue of storage is always relevant. a large number things, so ideal solution becomes . Independently, with the help of fittings, which are available in construction stores, you can do everything the same as a professional furniture maker. That is, form the boxes, screw the guides to the base of the bed and special rollers to the bottoms of the boxes themselves. It’s worth immediately making the bottom of the box reinforced so that it can withstand a sufficiently large weight of things, in any case, there will be quite a lot of them.

In addition to the classic model, which is a rectangular bed with sides, you can make other varieties that also have a special functional purpose. For example, make not a bed, but a cradle that stands on round legs and can swing, rocking the baby. This option can be called traditional and even folk, but today it is used only as an aid to rocking babies, and not for their full sleep. And the ready-made cradle costs such a lot of money that parents often refuse such an extra waste. That's why independent production will be 100% justified from an economic point of view. Another one utility model- an attached module that allows you to go through an intermediate stage in weaning the baby from the parent's bed. He seems to be sleeping with his parents, but on his own territory. For such or deep drawers are not needed, because you will not use it for a very long time. The wiser it would be to make such a furniture element yourself.

Do-it-yourself children's canopy crib

But even if manufacturing seems to you an impossible, complicated and too responsible task, there is still an opportunity to make your baby’s sleep more comfortable and create this comfort with your own hands. It's about sewing do-it-yourself baby canopy for the crib. This useful device helps to protect the child from flying dust, annoying insects in the summer, and just give him a greater sense of solitude, shading, which means a more restful sleep.

There are several varieties of canopy, at least the main ones, and you can see these types in the photo above. Mainly for do-it-yourself canopy on a crib, photo they show this, they use light, light fabrics that will ideally fit into the nursery environment and will perfectly cope with their main duties - not to let dust through, but to let in a sufficient amount of air and light. The choice of fabric generally depends on your personal preferences in terms of colors, but from the point of view of functionality, it is better to choose natural fabrics that do not cause allergies, which are easy to wash (and you will need to wash this item of children's use quite often).

You must also make the choice of the model itself based on the generated design. Somewhere a canopy would be appropriate, which is mounted on a high bracket and formed on the basis of a hoop, and somewhere a fastener that is mounted directly into the wall will look beautiful and the fabric diverges from it with two panels down, forming a semblance of a tent or tent.

Do-it-yourself canopy for a crib

Staged implementation do-it-yourself canopy for a crib each of the proposed methods you can find in the public domain, this is a simple science that will be within the power of everyone who has ever held a needle and thread in their hands. We will analyze the multifunctional option, which, in addition to the head of the bed, can also decorate on suburban area or in kindergarten.

The basis of the work will be a round hoop, on which you need to collect the fabric. You can buy such a hoop ready-made at the hardware store or use unnecessary hoops that lie idle in your home. The diameter in this case does not really matter, but for a beautiful drapery, the larger the hoop, the more fabric you will need to use. You can see an example of the first stages of creation do-it-yourself canopy on a crib step by step. First of all, the fabric itself is processed, the sections are hemmed and cut with an overlock if they are thin and crumble well. We do this because even with active use, our canopy will last as long as possible. It is necessary to form a pocket in the upper part of the fabric, where you will either pass the hoop wire, or which will need to be clamped between the circles of the hoop. There is also the option of fastening with metal eyelets, then you will have at your disposal a greater mobility of the panel. But you need to understand that there will be no silent system on the grommets, so you need to choose either ease of use, or silence, the inviolability of sleep for the baby.

Try to decorate the fabric of the canopy by using artificial flowers, fabric flags and other decor. In addition to the fact that such a product will bring great pleasure to you in an elegant room, it will also be interesting for the baby to look at bright fragments on the fabric lying down.

Do-it-yourself bumpers for a baby crib

AND final stage man-made creation of an ideal bed for a child - do-it-yourself baby bed railings. They have a very specific purpose - this is the safety of the baby, the softening of hard walls, which he will certainly want to study over time. From this curiosity, another function of the sides has grown, which no one thought about at the beginning - they become an excellent educational toy, with which a small person begins to study the world around him.

And so far, in models of home-made bumpers, two can be distinguished large groups- some are aimed at softening the walls, creating additional barriers and obstacles so that the baby does not roll and fall out of bed, and the second group represents a huge variety of bright, funny, soft, ringing, rustling elements that can replace a real developing rug.

The sides, of course, are always made removable so that they can be washed and cleaned in time. But also the ability to mobility allows the same elements of the sides to be used on the changing table during physical education and massage, and in the crib, and in the arena. Looking at bright pictures will help the child to be distracted and it will be much easier for the mother to cope with the tasks of the baby's hygiene.

The younger the child, the simpler the images on the side can be, the main thing is that they be bright and contrasting, which will attract his attention. It is during this period that it is better not to be led by your own ideas of beauty (pastel colors, blurry, muted colors), but to be guided by the physiological aspects of the vision of newborns. But later, when the baby begins to show an increased interest in the world around him, it is worth sewing bumpers with built-in elements that will crunch, squeak, ring, use different degrees of filling and texture of fabrics, and so on.

For children, parents always try to choose the best, including furniture, but looking at completely unchildish prices for wooden beds, or for beds - cars, boats, etc. involuntarily you will think about whether it is worth buying such a thing for several years ... Maybe not to buy, but you can do it yourself. A do-it-yourself baby bed can be assembled from several boards and bars in a few days. Especially complex work or no special tools required. Basically, you need hands and desire.

wooden bed

This regular bed without any pretense. In the presented version, it is suitable for middle school age and adolescents, but then it can be completed for children from 3 years old (second photo report). Assembled from wooden parts(boards and bars). The project can be used as a basis, then adding design ideas.

As for the color, you can argue, but as a base - a great option

Materials and tools

No special tools are required for manufacturing. All that is needed:

The materials needed are:

timber - 50 * 100 mm;
board 25*100 mm and 25*75 mm;
glue for wood;
putty for wood;
sandpaper.

The number of boards-bars is considered based on the planned dimensions. Requirements for wood - low humidity (not higher than 16%) and the absence of knots or their small number.

Making legs

A do-it-yourself baby bed begins with the manufacture of legs. From a bar of 50 * 100 mm we cut blanks - for the headboard it is longer, for the footboard it is shorter. You need 4 of each length. We glue the blanks in pairs. We take one, coat it with wood glue, lay the second one, checking whether they are evenly set, twist them with self-tapping screws. In principle, you can use a beam of 100 * 100 mm and do not mess with glue, but the price of it bites very much.

The heads of the screws are sunk into the wood, then sealed with wood putty. After drying, grind to a smooth state (sandpaper with medium or fine grain).

We also use sandpaper to bring the junction to an ideal state - everything should be even and smooth.

For the backs, you will need boards with a groove of 25 mm wide. If there is a milling cutter, you can make it yourself or grind it in a carpentry shop. Dowels can also be bought ready-made, choose a drill according to their diameter.

Holes for dowels are drilled at the ends of the planks with grooves. Accurately determine their distance from the edge - they must be strictly on the same level on all planks.

Also, the holes should be the same depth - half the length of this piece of wood. In order to be able to navigate when drilling, a marker is attached to the drill - a strip of masking tape. It controls the depth of the hole.

Headboard and footboard assembly

Planks of the same length are cut from a board of 25 * 50 mm to fill the head and foot. They are inserted into the groove, smeared with glue in advance.

We also drill a hole for the dowels in the leg. First we find the middle, draw a line along it (with a pencil). Attach the assembled backrest, align it along the upper edge, put the dowels on the line and mark the places where you need to drill holes for them (two at the top, two at the bottom). Pour a little glue into the holes and put the back. It should be planted tightly, without cracks. You can knock with a fist or a mallet (do not damage the wood).

We repeat the same operation with the other leg. A not very beautiful joint at the top can be closed with a board, putting it on self-tapping screws and covering the holes. As a result, here's what happens.

One important point which concerns gluing parts. Until the glue has hardened, the joints are movable and the parts may warp. Therefore, setting the angles to 90 °, the part is fixed (with clamps or in some other way) and left until the glue dries. Work is continued after drying, and, as a rule, it begins with grinding the joint, which has just been glued.

Making the base for the mattress

We take two boards 50 * 100 mm long, equal to the length of the mattress (or a couple of centimeters more to make it more convenient to refuel). Along the edge, we put a 25 * 50 mm bar on the glue and self-tapping screws. It is 10 cm shorter in length - we leave 5 cm from each edge. When screwing the bar, make sure that the edges are set exactly. We drill a hole under each self-tapping screw - close to the edge so that the wood does not burst. In addition, we make a hole in the hat larger diameter- they should be hidden.

Because adhesive connection in this case, fastened rigidly, you can not wait until the glue dries.

From the board 25 * 100 mm we cut the planks along the width of the mattress (you can add 1-2 cm again). They are attached to the just-made planks with an emphasis. Installation step - 10 cm, for each bar - 2 self-tapping screws on each side. A hole is pre-drilled under each self-tapping screw (the diameter of the drill is 1-2 cm less than the diameter of the self-tapping screw), the cap should go into the wood.

Holes for fasteners are covered with putty, polished after drying. In the extreme slats, cutouts are made for the installation of legs.

DIY baby bed: assembly

We finally close up all the chips and defects on the visible parts of the bed with putty, after it dries, we grind it to smoothness. Then primed and painted in the chosen color. After painting, it remains only to connect the backs and the base under the mattress, and we can assume that the children's bed is ready with their own hands.

You can connect the parts with the help of special fittings - brackets and curtains, or in a simple way - by nailing a corner, a bar, on which to rest the assembled shield for the mattress.

Do-it-yourself baby bed assembled

How to choose the right bed for a child: general recommendations for choosing

Parents should think about taking their rightful place in the room as early as possible. When choosing furniture for children, you need to pay attention to the following criteria:

It is best to purchase a baby bed made from natural materials.

The best solution would be to purchase solid wood furniture, because given material does not cause allergies, which allows you to protect the baby. Perfect option- this is a polished tree, since the varnished or painted surface of the bed can later serve as a place for the baby to grind teeth when teething.

Rooms for children should be as safe as possible, so you need to exclude sharp corners. In addition, it is best to purchase a crib that has railed sides, this device will allow the child to explore the world and at the same time will not allow him to fall out.

To provide additional safety for a child's place, bed linen is often equipped with soft bumpers along the edges of the crib.

Bed stability. baby sleeping area should be as stable as possible, if parents choose a bed with a pendulum mechanism, then it should have reliable design latches.

Today, long before birth, parents can find out the gender of the unborn child, so when choosing a crib, you can also take into account color variations in accordance with the gender of the newborn. Eg, modern room for boys it is distinguished by restraint and conciseness, at the same time, all kinds of ruffles, bows and frills are suitable for girl's bedrooms.

Baby cradles

Modern strollers for newborns are equipped with cradles, so many parents try not to buy a separate cradle for a newborn. However, if the child does not fall asleep well, his sleep is disturbing and short, you should think about purchasing a separate cradle for the baby.

There are several types of cradles for babies.

Types of cradles
Characteristics

Wicker cradles	At present, cradles woven from wicker or rattan are back in fashion. They are environmentally friendly and safe. Cradle-baskets can stand on special legs or be hung on special mounts to the ceiling. Inside such a cradle, manufacturers lay a soft bedding - a cozy sleeping place is ready.
Cradle with electronic control	The cradle consists of metal structure with natural fabric stretched over it. Such cradles are equipped with the latest mechanisms that help rock the child to sleep without the slightest effort. Most often, the set includes: a mobile for a crib for newborns, a motion sickness mechanism, lighting and music volume control.
Cradle 2 in 1	The transformer is an ordinary crib, which is complemented by a small cradle. The cradle is securely fixed in the crib. As the child grows, it can be detached and the baby will sleep in a regular-sized crib.

The choice of cradles is quite wide, but young parents should remember that cradles are only suitable for very young children. If the baby begins to sit down on his own, and this will definitely happen from about 5 months of age, then you will have to purchase another crib.

Classics are classics, or Classic beds for newborns

Looking through the catalog of products for newborns, you can find numerous photos of classic baby cribs. Classic models are suitable for children from birth to 3 years of age. Their size usually reaches 60 cm in width and 120 cm in length. classical wooden bed most often equipped with:

height-adjustable bottom;
wheels;
lattice sides;
downward-sloping side wall.

The price of different models directly depends on the equipment of the crib and on additional elements decor. The slats of the side walls should be at a distance of 4-7 cm, otherwise the baby may be crippled or stuck between them, trying to get out.

For the convenience of the mother, it is best to purchase a crib with an adjustable bottom and a lowering side wall. The bottom of the crib can be either solid or made from individual slats. A solid bottom made of wooden lamellas is considered the most acceptable option, since free space provides good ventilation mattress. It is worth taking care of additional accessories, for example, a musical mobile for a newborn crib, which will help calm a capricious baby, and a four-poster bed can reliably hide a child from prying eyes.

How to choose a transforming bed for a baby?

When choosing a crib for a baby, you should pay attention to models that are equipped with additional accessories. An example would be a bed with a changing table, chest of drawers or an extra bassinet. Also, the transformation can occur in connection with an increase in the bed in length or width.

Most often in stores there are transforming beds that have a small bedside table or a changing chest in the kit. These models are very popular, because clothes for newborns can easily fit in the drawer of the attached chest of drawers, and later in these drawers you can, for example, place standard baby bedding.

By purchasing such a model, parents immediately receive a bed for a child for many years to come, because in the process of growing up, many have to purchase the following types of furniture: first a cradle, then comes teenage furniture, and finally, youth furniture. While the child is small, the bed is used in assembled form, when the baby grows up, the nightstand can be removed and the small bed becomes standard sizes. Typically, teenage beds have sleeping sizes in the range of width from 60 to 80 cm, and lengths from 120 to 180 cm. When transforming, the chest of drawers turns into two bedside tables that fit perfectly into the interior of the bedroom for children.

Read the article about transforming tables!

Playpens for children: what you need to know when purchasing?

The children's bed-playpen is a kind of transformer that allows you to easily convert a bed into a zone for a child's games. Such models usually consist of metal frame and breathable walls, which are made of mesh and fabric, they can be easily washed and disinfected.

Playpens are most often purchased because of their mobility, functionality and in order to save space. If the family lives in small apartment, then placing a crib and playpen at the same time will be very problematic, and the 2 in 1 model will solve this problem. An important advantage of such structures is their mobility. There are models that can be folded into a regular bag and taken with you.

Modern models are equipped with additional accessories, their list includes:

baby changing table;
development mat;
mosquito net;
musical devices;
devices for motion sickness.

These accessories allow you to use the playpen also on the street, in the country, at a party or at home. Playpens-cots are designed for babies with Weight Limit 13-15 kg, that is, when a child reaches the age of 3-4 years, such a model will have to be abandoned.

Is a baby bed with a changing table really necessary?

After the birth of the baby, a lot of furniture immediately appears in the children's room:

dresser;
baby changing table;
linen locker;
children's bed;
manege and much more.

However, all furniture must be arranged very compactly so that everything you need is at hand. To save space, parents try to purchase furniture that can perform several functions at the same time, for example, beds with a changing table are quite popular. There are models on sale where a special board for swaddling a baby is attached to the sides, and there are also additional boxes for storing toys or clothes. Such furniture options are much more expensive than classic baby beds, but they help to significantly save space in the room and are quite comfortable to use.

There are also cots for newborns with a separate portable changing table, such designs can be used both assembled and separately.

To rock or not? How to choose a crib with a pendulum mechanism?

The principle of operation of the pendulum is quite simple - you need to gently push the crib with a pendulum mechanism, and for a long time it will swing by itself, gradually rocking the baby. It is important to remember that the crib should not be located close to walls or other pieces of furniture, because for movement pendulum mechanism free space is required.

There are 3 types of pendulum mechanism:

Longitudinal pendulum. The movements of such a pendulum resemble motion sickness in mother's arms, so the child falls asleep faster and sleeps more soundly.

cross mechanism. A bed with a transverse pendulum is most convenient for a child’s sleepiness at night, because in order to start the mother’s mechanism, you only need to swing the bed to the side.

Universal bed. This mechanism can be swung both back and forth, and from side to side. For example, during the day, a longitudinal swing mechanism will be most convenient, and at night it is better to use a transverse pendulum.

Nice additions to look out for when choosing a crib

For the convenience of young parents, crib manufacturers offer various additions that will help make caring for the baby as comfortable as possible.

Bottom level change

Practically in all modern models it is possible to adjust the bottom of the crib in height, there are cradles with two and three levels of the bottom. If the child is very small, it is more convenient for parents that the bottom is in the highest position. As the baby grows older, the bottom of the crib should be gradually lowered, as the child tries to get up and, with a slight depth of the crib, may fall out.

Presence of a car park

The so-called "auto-wall" mechanism means that one of the side walls of the crib can be raised and lowered, and is also securely fixed in this position; some cribs can completely remove the side wall. This device is ideal for co-sleeping, in which case the crib moves close to adult bed and the baby sleeps on the same level as the mother. Children's models in which it is completely retractable side wall, can later be used as a sofa in the children's room.

wheels

Many parents opt for beds with wheels on legs, because the mother needs to clean up the room quite often, and it is not so easy to move the crib on her own. It is important to consider that the wheels must either be removable or have a secure fit. Growing up, the baby becomes more and more active, and being in the crib, he will no longer lie quietly, so at about 6 months you will have to fix the wheels or remove them completely.

Silicone rail pads

These pads are designed to protect the gums and erupting teeth of a grown up baby. During the period of the appearance of teeth, the child scratches his gums and small teeth on everything that surrounds him and the crib is no exception. So that the child does not get hurt on the bed rails, it is worth installing special silicone pads. Covers are sold as a set or separately.

Built-in drawers

A pleasant find for parents can be models of cribs equipped with special built-in drawers. Such models allow you to store bed linen in the immediate vicinity of the crib, and in the future can be used as a toy box.

The manifestation of parental care in the first years of a baby’s life is achieved by surrounding the child with care and creating his own cozy place in the house.