Do-it-yourself table for a manual circular. Do-it-yourself circular: drawings, video, description. Circular table

The circular saw is a convenient and productive tool that is present in the workshop of every real man. If you work with lumber in large volumes, then you will need to do it for a circular saw.

Of course, you can make an individual order in furniture company. But you can build such a table on your own, having the necessary drawings, materials and tools.

Design The table consists of only two elements:

If desired, the craftsmen can add the product:

drawers;
racks.

Important: the circular saw is mounted under the table, only its disk is located on the tabletop. The hole for the saw should be slightly larger than the blade. Thus, sawdust will not clog the mechanism.

Such a piece of furniture should be strong enough and reliable. Keep in mind, the greater the power of the saw, the higher the load on the table surface will be.

TO benefits homemade table for a circular saw, you can also add:

comfort and convenience in work;
saving money;
high labor productivity;
the ability to make a product based on personal needs and characteristics of the workshop.

Material

You can make a circulation table on your own from different materials. The most common are considered:

or chipboard;

Each individual option has its own merits. Chipboard, plywood and MDF are easy and simple to work with. In addition, these lumber are available at an affordable cost. But products made of wood have higher strength and technical characteristics.

Attention: before proceeding with the assembly of the product, all of its wooden elements treated with antiseptic compounds.

Drawing and dimensions

Before starting work, it is recommended to make a drawing of the product. On it indicate all dimensions, materials of manufacture and other important information. Do quality drawing any piece of furniture possible with the help of special computer programs.

When drawing a table, be sure to consider the size of the circular saw. Each brand of tool will have a specific size.

If during the workflow you like to leave materials on the table, then tabletop dimensions must be at least 120 by 120 cm.

Tools

To make a practical and comfortable table, you will need different tools and materials:

lumber (plywood, chipboard, MDF and others);
boards for legs;
furniture glue;
paints and varnishes;
self-tapping screws;
drill;
milling cutter;
electric jigsaw;
circular saw;
Ruler and pencil.

How to make a table for a manual circular?

The manufacture and assembly of a table for a circular saw is divided into certain stages:

Finishing

After the manufacture and assembly of the circulation table, to simplify working moments, on the table it is desirable to mark. It is she who will help facilitate the cutting of materials.

To extend the life of the product and increase its aesthetics, a do-it-yourself table can be primed and varnished. These manipulations will also prevent the lumber from sliding on the surface and protect the product from high moisture.

Safety in use

Keep in mind that working with a circular saw is a dangerous business. To avoid injury during the work process, it is necessary to constantly monitor the position of the saw table, its strength and stability.

Each time before switching on the equipment, check that it is securely in place.

Attention: It is strictly forbidden to hold the cut material with your hands while the saw is running. Otherwise, your fingers may be damaged.

To prevent bouncing wood particles from getting into your eyes, work recommended with protective goggles.

Photo

Depending on what materials you used and how you solved the issue finishing, you might end up with something like this:

Useful video

We advise you to watch a detailed description of the manufacturing process in the following video:

Conclusion

In conclusion, it is worth noting that making a table for a circular saw on your own is not so difficult. And its presence will greatly simplify and even expand the functionality of using a circular saw.

In contact with

Many home craftsmen dream of conducting independent cutting of lumber. This is a simple matter, but without suitable equipment it is almost impossible. So why not adapt a hand-held circular saw for this and assemble a table with the possibility of a longitudinal and transverse cut with your own hands?

In the four corners of the shoe, make one hole with a diameter of 10 mm. Drilling locations are optional. Place the saw blade in the slot on the tabletop and align the shoe with the markings. Mark the centers of the holes made on the plywood and transfer them to the back side with a thin drill.

If there is not enough space in the support shoe to drill such large holes, use two steel plates with welded 6 mm studs, attach them to the base of the saw with wing nuts with star washers. In this case, remove the saw to self made and return it to its place without additional adjustment will be a matter of five minutes. The plates, in turn, have one large hole each for secure mounting and initial adjustment of the position of the saw.

To fasten the saw to the tabletop, you need to use M8 ploughshare bolts with a countersunk cone head. under them with front side a hole of 8 mm is drilled and a countersink is made for the cap, which in the loose state should protrude no more than 1 mm above the surface. WITH reverse side the bolts pass into the holes of the support shoe (or steel plates) and are tightened under a wide and spring washer, or a nut with a plastic groove.

If the fitting was successful, the countertop must be fixed to the box. In the four corners of the plywood board, you need to drill one hole the same as for attaching the saw. The distance from the edges is half the side of the bar used plus the wall thickness of the box, in our case it is 30 mm. A 10 mm hole is drilled in the center of each bar, a steel screw M8x18 mm is screwed inside.

Once the tabletop is secured, turn the table on its side so that you have access to both the blade and the saw mounts at the same time. Taking away for a while protective cover, align the saw blade along the longitudinal axis of the table using a rail and square. After adjusting the disc, tighten the fastening nuts well. Using a ruler or level attached to the disc, mark the edges of the table and draw a line of the cut plane along them. Draw along the line several times with an awl, leaving a shallow groove, such a marking will definitely not be erased after long use.

Start button and electrical

The standard power button must be shunted, and if this is not possible, clamp it with a clothespin or harness. Instead of a button on the handle, a small electrical network will be used, laid inside the box.

On the outer front side of the box, install a double button "Start / Stop" with fixation. Its normally open contact is connected to a break in the power cable. The ends of the wire are connected to a socket screwed with inside.

After the saw is connected and tested in operation, it is necessary to pull a triple-folded nylon stocking onto the air intake grille.

Cross cut guide

Trimming of parts is conveniently carried out in the presence of a thrust beam that moves along guides along the cut line. You can make this from ordinary 9 mm plywood.

All you need is a few boards:

150x250 mm 2 pcs.
100x820 mm 2 pcs.
150x820 mm 1 pc.
142x300 mm 1 pc.

As before, sawing plywood on precision equipment is preferable. Three long boards must be assembled in the form of a channel 150 mm wide and with shelves of 100 mm. Since the self-tapping screws will face the countertop, you need to pre-drill the plywood under them and recess the fasteners, and then process the traces sandpaper. It is more reliable to use confirmations instead of self-tapping screws.

Boards 150x250 mm are screwed like channel plugs, the free ends are directed downwards. The remaining bar is screwed between the shelves exactly in the center. If this beam is placed on a table, the side boards will drop down the sides of the box with a gap of about 10 mm on each side.

Use furniture guides full extension on ball bearings. First attach them to the beam, and then try on and screw them to the body. The fastening holes are oblong, use them to adjust the beam: it should slide over the tabletop with a very small gap and at right angles to the cutting plane. Pass the beam once with the saw running to make a cut at the bottom. For quick removal and installation of the beam, it is recommended to snap off the plastic clips on the rails in advance.

Adjustable rip fence

It is much easier to dissolve the forest if there is a longitudinal stop. It can be made from an ordinary aluminum cornice or another lightweight profile with a perfectly even edge and stiffeners. You will need a cut along the length of the table, that is, 800 mm.

At 150 cm from the edges, make two holes of 8 mm and insert into them along the M8 bolt, orienting the thread down. Screw on the nut without the washer and tighten firmly. At the same distance from the edges of the table, draw two lines. At their intersection with the centerline of the tabletop, drill holes of 12 mm. One more hole is drilled on the same lines with an indent of 30 cm. Using a milling cutter or a jigsaw, make two thin slots, it is advisable to cut as evenly as possible.

The stop profile is inserted with bolts into these slots; after adjustment, it can be pressed with lambs with a wide washer from the inside. If the cutting width needs to be changed frequently, supply the table body with door hinges for easy opening. To make the adjustment of the stop faster, fasten the cut tape from the tape measure to the ends of the table.

Most carpenters and woodworkers want to have a universal unit on the farm, but many do not know how to make such a device on their own. In this guide, you will learn how to make a versatile milling table with your own hands.
pros universal machine on wood in that you do not need to have several units and walk with the workpiece from one to another during work. The only and universal, will be on the same table, and perform the actions of several units. Of course, the limitations of such a device are present, and it is not possible to make an absolutely universal woodworking machine. But to make a table for a router with your own hands, in which there will be an electric planer and a circular saw, is quite realistic.
To translate the idea into reality, you need to take care of consumables, as well as the tools that will be needed to create an accurate and even table on which the devices will be fixed. Since there will be more than one device on the table, it is required to make a wider and long table. In order not to spoil the materials in vain, first you need to draw a diagram and the location of future devices on a piece of paper. This is an extremely significant argument, since the efficiency of the machine directly depends on the proper arrangement of all elements. Take care of the position of each node in advance. If the task seems very complicated, you can use ready-made diagrams and drawings. Thus, craftsmen make a table for circular saw by hand, without the help of experts.

Basic criteria for a circular saw table

The structure on which the woodworking mechanisms will be installed must have the following characteristics:

Capital rigidity and stability.
Perfectly flat surface.
Grounding.
Free space for sawdust.
Easy access to waste for their elimination.
Protection shields that are installed over rotating elements.

Compliance with the above rules will help to make really high-quality and safe table for a do-it-yourself cutter.

There are several requirements for a circular saw that must be considered for quality, performance and safe work unit.

1. Good fastening of the saw blade.
2. Fencing the working part of the saw blade, which many consider an impossible task.
3. Availability of the start-stop button of the unit.

Additional requirements for the table depend on the preferences of the carpenter and his professionalism in this area. Auxiliary elements will help to more accurately process workpieces, make sawing of longer boards, which will ultimately affect the capabilities of the machine to produce absolutely accurate, high-quality and complex products.

Most craftsmen do the drawings of the milling table with their own hands, and if you are not sure, it is better to work with a locksmith, or the person who made such a device.

The design of the circular saw, the machine from the Baikal circular saw

An ordinary table, which can be purchased complete with a circulation plate, is made in most cases from stainless iron. Craftsmen use simple steel, and supporting structure welded from metal corners. The wood-cutting disc is mounted in the inner part of the table, on a shaft with bearings, and the mechanical energy is supplied by means of a belt drive. There is a slot in the slab for the disc, which is surrounded on all sides by wooden formwork, and is adjusted from the inside of the table with screws. Gap between table and cutting disc, should be a few millimeters, otherwise the sawdust in the work will be clogged into the slot, and lead to a malfunction of the unit. The gap is adjusted depending on the discs used. Everyone tries to make drawings of the circular table with their own hands in order to make a universal and nice table for woodworking, but a lack of knowledge can play a bad joke.

Video: circular machine from circular saw Baikal 514

Calculation of parameters

To avoid costs and absurdities, strictly follow the basic parameters of the materials presented, and you will make a high-quality carpentry table with your own hands. When we assemble a table for a manual circular saw with our own hands, it is necessary to take into account the power of the electric motors that will be used. If you are putting together a table for manual router with your own hands, it is also necessary to take into account the performance of the motor.

For a deeper understanding of the design and layout of the product, view the story about carpenter's table do-it-yourself video of which is posted on the site.
Given that the table will be universal, it is necessary to make the design as stable and durable as possible. The craftsmen make the drawings of the table for the router with their own hands, but if another person will weld the structure, it is necessary to explain in detail so that in the end all the elements are in the right places. You can not separately make a milling table for a manual router with your own hands, since most craftsmen, having made universal table, work on it and hand tools. This is very convenient, because there is enough space to work, everything is at hand and productivity increases.

Power calculation

To make a good table for a circular saw with your own hands, you need to make the correct calculation of power, with the ratio of the power of the electric motor and the intended work. That is, for comfortable sawing of various types of wood, it is enough to put an electric motor of 1000-1200 W. Experts advise not to use more powerful engines because it's a big risk. If you need significant power and productivity of the installation, you should make the design of the table more solid and perfect. With the proper approach, many craftsmen create a table for a manual router with their own hands, much better and more productive than models from branded manufacturers.

For a more accurate understanding, view the story on how to make a do-it-yourself milling table, the video of which is in the public domain for viewing.
Industrial machines, as mentioned above, are completely made of metal, and the lower part is supplemented concrete slab, for greater reliability of mounting the unit. Do-it-yourself circular table, craftsmen make entirely of metal or in a duet with wooden elements.

It is important to take into account the factor if more units are integrated on the woodworking table, and the more powerful the nominal performance is required, the stronger and more massive it is necessary to make the carpentry table with your own hands.

Small table for manual woodworking machines

For the manufacture of a small woodworking installation, you can not use metal. The following materials will suffice:
- textolite plate.
- lasta plywood with a diameter of 20 or 50 mm.
- plexiglass.

Many people make drawings of the sawing table with their own hands or do without them at all, but as practice shows, it is better to use pre-prepared schemes, since this simplifies and facilitates the manufacturing process.
For greater convenience and opportunities for processing workpieces, carpenters produce Rotary table For milling machine with their own hands, which makes the work much more convenient, more pleasant, and wooden crafts better and more perfect. Thus, craftsmen or adventurers make a saw table with their own hands.

Many people wonder how to make a milling table? Firstly, the material of manufacture depends on the size and power of the device used on it. From this we can understand that if the machine is large, then metal is needed, and if it is manual, then plastic and wooden elements. Thus, you can make a saw table with your own hands in a garage or a private workshop.
.
Woodworking is a very scrupulous and responsible process, so it is very important to make a table for a hand-held circular saw with your own hands. It is very beneficial to make the tool yourself, because ready product much more expensive than the materials for manufacturing. A well-made do-it-yourself table for a manual circular can be used when working with other portable woodworking tools. To make the craft of a carpenter not only pleasure, but also convenience, you can make a table for a planer with your own hands. Such a table can be made absolutely of wood, the main thing is to calculate the parameters.

Sometimes you need to make a separate table for an electric planer with your own hands, which will not cause trouble for the master, since the basis of the design and materials are the same as for the manual circular table. When there is nowhere to put the woodworking tool, this is a signal that you need to make a do-it-yourself tool table. Here, for each master, there are no barriers to creativity, since they are made of metal, plastic, wood, using various pockets and shelves. The tool table is the main element for maintaining order and cleanliness in the workshop.

Watch the video circular table do-it-yourself, which outlines all the details about the manufacturing process.

Video: Desktop for a circular saw

Video: milling table; milling table

Comments:

Many owners of hand-held circular saws are thinking about improving them, since this tool, which is necessary in the household, with all the advantages inherent in portable devices, is not able to replace a stationary circular saw.

The designers of some DP models decided to help consumers and provided their products with devices that can somehow compensate for the lack of a table needed to work with materials. large sizes. And yet, all design tricks, as a rule, are compromises.

How to make a stationary circular from a manual circular

Of course, there is a way to get rid of the shortcomings portable tool- buy a stationary circular. However, since you have become the owner of a hand-held circular saw, do you plan to work with it? Shouldn't you start by making a do-it-yourself table for a circular saw that will help turn a DP into a full-fledged machine? As a result, you will get experience, satisfaction from the work done and, finally, the desired result.

if you have old table(dining, kitchen, writing), then it will make an excellent bed. But it may happen that such a thing is at hand in right time it won’t turn out, so tips on how to make a table with your own hands for your DP will certainly come in handy.

For the working surface of the future machine, the so-called Finnish plywood is ideal. This material is laminated (good sliding of workpieces when sawing), thick enough (can withstand a large mass), moisture resistant ( useful quality for outdoor storage) and at the same time it is not deprived of such qualities of wood as ease of processing.

You can use to make a table with your own hands and plain plywood 20 mm thick, only it will have to be treated with special compounds and painted. It would be even better to cover the table with a sheet of steel or textolite.

Any boards at least 40 mm thick are suitable for the manufacture of drawers, and the legs can be made from wooden blocks, steel corners or profile pipes, but 100x50 mm boards are best suited

You need to be warned before you get started that the finished table for the circular saw will reduce the cutting depth of the circular saw just by the thickness of the cover, but if your DP is equipped with a disk large diameter, then this circumstance will have little effect on the performance of the new machine.

Manufacturing of lids and sides

When making a table with your own hands, keep in mind that the length and width of its working surface must be sufficient so that the workpiece can lie flat on the table top. The accuracy of its processing largely depends on this. You can add that an electric planer and a jigsaw can also be attached to a wide table from below. Then you get a multifunctional machine.

Cut out a rectangular sheet of plywood of the required size and process its edges. On the future inside of the countertop, mark the fastening. You can lean the sole of the circular against the surface and circle it with a pencil, and make a slot in the tabletop with a saw blade. If your DP will be used for cutting blanks under different angles, then the slot should expand towards the top of the table.

You can pick up a few millimeters of thickness from the table in order to try to get closer to the depth of cut provided for by your DP passport. Make a small indentation for the sole with a milling cutter. Of course, do not abuse this opportunity (a depth of 10 mm is enough).

Now it's time to make the side boards (side boards under the tabletop), they will strengthen the structure and ensure the legs are securely fastened. In addition, it will be possible to place fittings on the side to turn the tool on and off. The sides will be located 5-10 cm from the edges of the tabletop. With this in mind, cut 4 boards. Collect them in a box and fasten it with self-tapping screws (2 fasteners on each edge).

Coat the edges that will adhere to the lid and the countertop with carpenter's glue, attach the box to it and fix the sides together with the lid with clamps. Without removing them, screw the screws through work surface into the sides. Remember that the heads of the fasteners must be flush with the surface of the table, so before screwing in the screws, drill holes and countersink them.

Table legs

Making a do-it-yourself table for DP has not ended. Now you need to attach legs to it. Calculate their height so that it is convenient for you to work in the future. The legs are attached to the drawers from the outside and are pulled together with screws, bolts or threaded studs. The heads of screws and bolts, as well as nuts, must be separated from the wood with washers.

Even if you think that you have securely fastened the legs, they still need to provide additional rigidity, because a slightly different load will act on a table made with your own hands than on a coffee table.

Spacers will have to be welded to the legs from a profile or corner, and bars of 40x40 mm or 50x50 mm are suitable to reinforce the supports from the boards.

Required extras

In order not to miss a single detail when making a table with your own hands, you should be aware of the restrictive or regulating bar. Some models of portable DP have it, but its stroke is not enough to work with wide workpieces.

Table circular machine: 1 - plywood jumper; 2 - steel plate; 3 - insert; 4 - saw blade; 5 - screws; 6 - countersunk screws; 7 - bed board.

The length of the bar should match the length of the table. It can move along the guides on both sides of the cover or be fastened with clamps. In the surface of the table, you can make 2 slots perpendicular to the saw blade, through which the restrictive bar will be attached at one or another distance from the blade. The limiter can be made from a bar, a metal corner or a profile pipe.

It remains to make a new switching unit for the new machine. It's pretty simple work. On one of the kings is installed ceramic socket, where the DP will be connected. The saw button is fixed in the on state (do not break it, but make a simple latch from a strip of steel or aluminum, wrap the button with the handle with electrical tape). On the wire going from the socket on the frame to the mains, install any switching device that matches the power consumption of the saw blade. Fix it on the sidewall in a place convenient for you.

Make a table for a circular with your own hands, having a hand power tool at your disposal Bosch or another leading manufacturer, it's not difficult. But the presence of a table will significantly expand the capabilities of the tool. Manual models Bosch circulars, like their counterparts, demonstrate high performance. But maneuverability, as the main plus of a hand-held circular saw, can turn into a minus if you need to process a large amount of workpieces. This is where a homemade table comes to the rescue.

The design of the table required for a manual circular is quite simple, which allows you to do it yourself. Homemade platform it takes a little skill and time to make it;
Drawings and diagrams are not mandatory components for the successful assembly of the table with your own hands;
The optimal material in order to make a table for a Bosch manual circular is metal;
When choosing a metal table for a circular, do not forget about the massiveness of the structure and the need to be able to work with welding machine with your own hands;
Often the table is made by hand on the basis of wood. They are easier to assemble, which allows them to be made by a beginner;
Under the tabletop, the Bosch circular itself or its analogues is installed;
The disc should protrude above the tabletop. For this, a special slot is provided on the surface of the table;
Lumber moves across the surface of the table and is sawn cutting tool circular saw;
To increase the accuracy of processing, the table can be additionally equipped with a longitudinal and angular stop;
The tabletop will take away part of the working disk, because the sawing depth of the manual circular will become less by exactly as much as the thickness of the working table. This indicates the need to choose a hand-held power tool that allows you to install large diameter saw blades;
The desktop is recommended to be done with an emphasis on strength and subtlety. For these purposes, metal or durable wood species are suitable.

In many cases, it is better to start making a table with your own hands before you buy the circular saw itself. This will allow you to optimally select the characteristics of the equipment. For a manual circular that you want to make a machine on your desktop, the optimal power will be at least 1.2 kW. This will allow you to cut efficiently and without overloading. a large number materials.

Tools and materials

If you are unlikely to need the drawings, reinforce those received in this material knowledge of video tutorials on assembling tables for circulars will not be superfluous.

To make a countertop, thanks to which a manual circular will become a desktop, you will need certain materials and tools. This list includes:

Sheet laminated plywood. Approximate dimensions thickness - 15-20 mm;
Wooden beam. Its dimensions are 50 by 50 mm;
Quality board;
Switch;
Socket;
Electrical cable;
Glue;
Paints and varnishes;
Self-tapping fasteners;
Electric jigsaw;
Screwdriver or electric screwdriver;
Ruler;
Household drill.

Determine the dimensions at your discretion. But if the desktop circular is too compact, you will not be able to cut long workpieces on it with the required comfort.

When choosing dimensions, be guided by the parameters of the most frequently processed workpieces. The dimensions of the table must be such that the product fits completely on the tabletop. This will allow you to cut lumber with your own hands using a Bosch tool.

Table top assembly

When everything is ready, you can start working with your own hands. Let's assume that Bosch power tool you have already chosen or preferred an analogue of a trusted manufacturer represented by Bosch.

The approximate dimensions of the countertop, taking into account the selected materials, is 50 by 50 by 25 centimeters. You can make your table larger or smaller, depending on personal preference, the size of your workshop, or the specifications of the Bosch circular saw you are using.

Taking a laminated plywood sheet as a basis, cut out a countertop of the size corresponding to the selected parameters. Plywood may not be laminated, but in this case it will need to be coated with a layer of varnish. Apply markings from below so as not to spoil appearance future table. By using electric jigsaw cut off the excess, clean the edges.
Turn the sheet upside down, apply marks for mounting a hand-held circular saw. To do this, remove the saw blade from your circular saw, place the device with the sole against the surface of the sheet. Make marks on the sheet itself and the sole for future fastenings.
Use a drill to drill the holes needed for the bolted connections. Screw the bolts from above through the table, and from below the structure will be held on by nuts. Here it is recommended to countersink the holes on the working side of the sheet, grind the bolt heads. So they won't show up.
If you are going to cut the material on the machine with a Bosch circular at different angles, the hole for the saw blade should be made in a certain shape - an inverted trapezoid. If only smooth cutting is planned, it is enough to cut standard type groove.
Do not rush to immediately cut a hole according to the markup. Once again, take the circular, attach it to the sheet, check that the dimensions match, after which you can continue to work.
Use a pencil to mark where the stiffeners will be installed. To make them, use a wooden board. The ribs are located below, stepping back from the edge of the tabletop about 8-10 centimeters.
Tabletop legs are recommended to be mounted to the stiffeners. To fix the ribs, use self-tapping screws, screwing them with a screwdriver in increments of 15-20 mm. It will not be superfluous to additionally glue everything with PVA glue. Self-tapping screws must be screwed through the top of the desktop, while sinking the heads of the fasteners. Using long self-tapping screws, do not forget to connect the stiffeners together.
Using timber or boards, cut out blanks to create the legs of your design from them. The length can be 100-120 centimeters. Here you should focus on your own height, since it will be inconvenient for a high master to work on a low table. If the legs diverge slightly towards the bottom, this will give them more stability. Fixation is carried out according to the bolt-nut principle. Between them it is not superfluous to use washers. Having completed the screed from a bar, the frame of the desktop will turn out to be more durable.
You can adjust the height of the table with nuts that are screwed to the legs from below. M14 bolts are suitable for these purposes.
Now go directly to fixing the circular saw. Drive the disc into the slot made, and secure with appropriate fasteners.
From the inside of the table, it is recommended to screw the socket, connect the wiring to it and place the switch in a convenient but safe area. Drown the on-off button on the circular body and fix it.
Using a square tube and wing nuts, longitudinal stop. Cut the pipe according to the length of the table for the circular, drill holes for the screws 30 mm from the edge of the tabletop. Using pieces of plywood, a pair of clamps is made.