DIY table for manual circular saw. DIY circular paper: drawings, video, description. Circular table

A circular saw is a convenient and productive tool that is present in the workshop of every real man. If you work with lumber in large volumes, then for a circular saw you will need to make.

Of course, you can make a custom order at furniture company. But you can build such a table on your own, if you have the necessary drawings, materials and tools.

Design The table consists of only two elements:

If desired, craftsmen can add the following to the product:

drawers;
racks.

Important: The circular saw is mounted under the table; only its blade is located on the tabletop. The hole for the saw should be slightly larger than the blade. This way, sawdust will not clog the mechanism.

Such a piece of furniture must be quite durable and reliable. Keep in mind, the greater the power of the saw, the higher the load on the table surface will be.

TO benefits homemade table for a circular saw you can also add:

comfort and ease of use;
saving money;
high labor productivity;
the opportunity to make a product based on personal needs and the characteristics of the workshop.

Material

You can make a circulation table yourself from different materials. The most common are considered:

or laminated chipboard;

Each individual option has its own advantages. Laminated chipboard, plywood and MDF are easy and simple to work with. In addition, these lumber are affordable. But products made from wood have higher strength and technical characteristics.

Attention: Before you begin assembling the product, all of it wooden elements treated with antiseptic compounds.

Drawing and dimensions

Before you start working, it is recommended to make a drawing of the product. On it indicate all the dimensions, materials of manufacture and other important information. Do high quality drawing any furniture item possible using special computer programs.

When making a drawing of the table, be sure to consider the size of the circular saw. Each brand of tool will have a specific size.

If you like to leave materials on the table during the work process, then The dimensions of the tabletop must be at least 120 by 120 cm.

Tools

To make a practical and comfortable table, you will need different tools and materials:

lumber (plywood, chipboard, MDF and others);
boards for legs;
furniture glue;
paints and varnishes;
self-tapping screws;
drill;
milling cutter;
electric jigsaw;
circular saw;
Ruler and pencil.

How to make a table for a manual circular saw?

The manufacture and assembly of a table for a circular saw is divided into certain stages:

Finishing

After manufacturing and assembling the circulation table, to simplify working moments, place it on the table it is advisable to mark. It is this that will make it easier to cut materials.

To extend the life of the product and increase its aesthetics, a hand-made table can be prime and varnish. These manipulations will also prevent the lumber from sliding on the surface and protect the product from increased moisture.

Safety in use

Keep in mind that working with a circular saw is dangerous. To avoid injury during the work process, it is necessary to constantly monitor the position of the saw table, its strength and stability.

Each time, before turning on the equipment, check how firmly it is secured in place.

Attention: Holding the cut material with your hands while the saw is running is strictly prohibited. Otherwise, your fingers may be damaged.

To prevent bouncing wood particles from getting into your eyes, work Wear safety glasses recommended.

Photo

Depending on what materials you used and how you solved the issue finishing, you might end up with something like this:

Useful video

We recommend watching the following video for a detailed description of the manufacturing process:

Conclusion

In conclusion, it is worth noting that making a table for a circular saw on your own is not so difficult. And its presence will significantly simplify and even expand the functionality of using the circular saw.

In contact with

Many home craftsmen dream of cutting their own lumber. This is not a difficult task, but without suitable equipment it is almost impossible. So why not use a hand-held circular saw for this and assemble a table with your own hands with the ability to make longitudinal and transverse cuts?

Make one hole with a diameter of 10 mm in the four corners of the shoe. Drilling locations are arbitrary. Place the saw blade in the groove of the tabletop and align the shoe with the marking. Mark the centers of the holes made on the plywood and transfer them to the back side with a thin drill bit.

If there is not enough room in the support shoe to drill such large holes, use two steel plates with welded 6 mm studs, attach them to the base of the saw with wing nuts backed by star washers. In this case, remove the saw to self made and return it to its place without additional adjustment will be a matter of five minutes. The plates, in turn, have one large hole each for reliable installation and initial adjustment of the position of the saw.

To fasten the saw to the tabletop, you need to use M8 plowshare bolts with a countersunk conical head. Under them with front side an 8 mm hole is drilled and a countersink is made for the cap, which, when untightened, should protrude no more than 1 mm above the surface. WITH reverse side the bolts pass into the holes of the support shoe (or steel plates) and are tightened under a wide and spring washer, or a nut with a plastic lock.

If the fitting was successful, the countertop must be fixed to the box. In the four corners of the plywood board you need to drill one hole, the same as for attaching the saw. The distance from the edges is half the side of the bar used plus the thickness of the box wall, in our case it is 30 mm. A 10 mm hole is drilled in the center of each block, and a steel fitting M8x18 mm is screwed inside.

Once the tabletop is secure, turn the table on its side so you can access the blade and saw mounting points at the same time. Putting it away for a while protective cover, align the saw blade along the longitudinal axis of the table using a saw blade and a square. After adjusting the disc, tighten the fastening nuts thoroughly. Using a ruler or level attached to the disk, mark the edges of the table and draw a line for the cutting plane along them. Run an awl along the line several times, leaving a shallow furrow; such markings will definitely not be erased after long use.

Start button and electrics

The standard power button must be bypassed, and if this is not possible, clamp it with a clothespin or a tourniquet. Instead of a button on the handle, a small electrical network installed inside the box will be used.

On the outer front side of the box, install a double “Start/Stop” button with locking. Its normally open contact is connected to the power cable break. The ends of the wire are connected to a plug socket screwed with inside.

After the saw is connected and tested in operation, it is necessary to pull a nylon stocking folded in three onto the air intake grille.

Cross cut guide

It is convenient to trim parts in the presence of a thrust beam, which moves along guides along the cutting line. This can be made from ordinary 9 mm plywood.

You only need a few planks:

150x250 mm 2 pcs.
100x820 mm 2 pcs.
150x820 mm 1 pc.
142x300 mm 1 pc.

As before, it is preferable to cut plywood using precision equipment. Three long planks need to be assembled in the shape of a channel 150 mm wide and with shelves of 100 mm. Since the heads of the screws will face the tabletop, you need to pre-drill the plywood for them and recess the fasteners, and then process the marks emery cloth. It is safer to use confirmats instead of self-tapping screws.

Boards 150x250 mm are screwed like channel plugs, the free ends are directed downwards. The remaining strip is screwed between the shelves exactly in the center. If this beam is placed on a table, the side boards will drop down the sides of the box with a gap of about 10mm on each side.

Use furniture guides full extension on ball bearings. First attach them to the beam, and then try them on and screw them to the body. The mounting holes are oblong, use them to adjust the beam: it should slide over the tabletop with very little clearance and at right angles to the cutting plane. Run the beam once with the saw running to make a cut at the bottom. To quickly remove and install the beam, it is recommended to unclip the plastic clips on the guides in advance.

Adjustable rip fence

It is much easier to unravel the forest if there is a longitudinal stop. It can be made from a regular aluminum cornice or other lightweight profile with a perfectly straight edge and stiffening ribs. You will need a piece along the length of the table, that is, 800 mm.

Make two 8 mm holes 150 cm from the edges and insert an M8 bolt into them, oriented with the thread down. Screw on the nut without the washer and tighten tightly. Draw two lines at the same distance from the edges of the table. At their intersection with the center line of the tabletop, drill 12 mm holes. One more hole is drilled along the same lines with an indentation of 30 cm. Using a router or jigsaw, make two thin slots, it is advisable to make the cut as evenly as possible.

The stop profile is inserted with bolts into these slots; after adjustment, it can be tightened using wings with a wide washer on the inside. If the cutting width needs to be changed frequently, equip the table body with door hinges for easy opening. To quickly adjust the stop, attach pieces of tape from a tape measure to the ends of the table.

Most carpenters and woodworking craftsmen want to have a universal unit on their farm, but many do not know how to make such a device on their own. In this guide, you will learn how to make a versatile milling table with your own hands.
pros universal machine for wood is that you don’t need to have several units and walk with a workpiece from one to another while working. Unique and universal, it will be located on one table and perform the actions of several units. Of course, there are limitations to such a device, and it is not possible to make an absolutely universal woodworking machine. But making a table for a router with your own hands, which will include an electric planer and a circular saw, is quite possible.
To translate the idea into reality, you need to take care of consumables, as well as the tools you will need to create an accurate and level table on which the devices will be mounted. Since there will be more than one device on the table, it is required to make a wider and long table. In order not to waste materials in vain, first you need to draw a diagram and location of future devices on a sheet of paper. This is an extremely significant argument, since the efficiency of the machine directly depends on the proper arrangement of all elements. Take care of the position of each node in advance. If the task seems very complicated, you can use ready-made diagrams and drawings. Thus, craftsmen make a table for circular saw with your own hands, without the help of experts.

Basic criteria for a circular saw table

The structure on which woodworking mechanisms will be installed must have the following characteristics:

Capital rigidity and stability.
Ideally flat surface.
Grounding.
Free space for sawdust.
Easy accessibility to waste for its disposal.
Protection shields that are installed above the rotating elements.

Compliance with the above rules will help you make truly high-quality and safe table for a router with your own hands.

There are several requirements for a circular saw that must be taken into account for quality, productive and safe work unit.

1. Good fastening of the saw blade.
2. Fencing the working part of the saw blade, which many consider an impossible task.
3. Availability of the unit start-stop button.

Additional requirements for the table depend on the preferences of the carpenter and his professionalism in this area. Auxiliary elements will help more accurately process workpieces, cut longer boards, which will ultimately affect the machine’s capabilities for producing absolutely accurate, high-quality and complex products.

Most craftsmen make the drawings of a milling table with their own hands, and if you are not sure, it is better to work with a mechanic or a person who made such a device.

Circular saw design, Baikal circular saw machine

An ordinary table, which can be purchased complete with a circulation plate, is made in most cases from stainless iron. Craftsmen use simple steel, and supporting structure welded from metal corners. The disk cutting wood is mounted in the inside of the table, on a shaft with bearings, and mechanical energy is supplied via a belt drive. In the slab there is a slot for the disk, which is surrounded on all sides by wooden formwork, and is adjusted with screws from the inside of the table. The gap between the table and cutting disc, there must be a few millimeters, otherwise sawdust will clog into the gap during operation and lead to a malfunction of the unit. The gap is adjusted depending on the disks used. Everyone tries to complete the drawings of a circular table with their own hands in order to make a universal and good table for woodworking, but lack of knowledge can play a bad joke.

Video: circular saw from circular saw Baikal 514

Calculation of parameters

To avoid costs and absurdities, strictly follow the basic parameters of the materials presented, and you will make a high-quality carpentry table with your own hands. When we assemble a table for a hand-held circular saw with our own hands, it is necessary to take into account the power of the electric motors that will be used. If you are assembling a table for hand router with your own hands, you also need to take into account the performance of the motor.

For a deeper understanding of the design and layout of the product, watch the story about carpenter's table do-it-yourself video of which is posted on the site.
Considering that the table will be universal, it is necessary to make the structure as stable and durable as possible. Craftsmen make drawings of a table for a router with their own hands, but if the structure is to be welded by another person, it is necessary to explain in detail so that in the end all the elements are in the right places. You don’t have to separately make a milling table for a manual router with your own hands, since most craftsmen, having made universal table, work on it and hand tools. This is very convenient because there is enough space to work, everything is at hand and productivity increases.

Power calculation

To make a good table for a circular saw with your own hands, you need to make the correct calculation of power, taking into account the ratio of the power of the electric motor and the expected work. That is, for comfortable sawing of various types of wood, it is enough to install an electric motor of 1000-1200 W. Experts do not recommend using more powerful engines because it's a big risk. If you need significant power and productivity of the installation, you should make the table design more thorough and perfect. With the proper approach, many craftsmen create a table for a manual router with their own hands, much better and more productive than models from branded manufacturers.

For a more accurate understanding, watch the story on how to make a milling table with your own hands, the video of which is publicly available for viewing.
Industrial machines, as mentioned above, are completely made of metal, and the lower part is supplemented concrete slab, for greater reliability of mounting the unit. Craftsmen make a table for a circular table with their own hands entirely from metal or in combination with wooden elements.

It is important to take into account the factor if more units will be integrated on the woodworking table, and the more powerful the rated output is required, the stronger and more massive it is necessary to make the woodworking table with your own hands.

Small table for manual woodworking machines

To make a small woodworking machine, you don’t need to use metal. The following materials will suffice:
- textolite plate.
- plywood fins with a diameter of 20 or 50 mm.
- plexiglass.

Many people make drawings of a sawing table with their own hands or do without them at all, but as practice shows, it is better to use pre-prepared diagrams, as this simplifies and facilitates the manufacturing process.
For greater convenience and processing capabilities of workpieces, carpenters make Rotary table For milling machine with your own hands, which makes work much more convenient, enjoyable, and wooden crafts better and more perfect. Thus, craftsmen or adventurers make a saw table with their own hands.

Many people wonder how to make a milling table? Firstly, the material of manufacture depends on the size and power of the device used on it. From this we can understand that if the machine is large, then metal is needed, and if it is manual, then plastic and wooden elements. Thus, you can make a saw table with your own hands in a garage or private workshop
.
Wood processing is a very sensitive and responsible process, so it is very important to make a table for a hand-held circular saw with your own hands. It is very profitable to make the instrument yourself, because ready product much more expensive than the materials for manufacturing. A high-quality DIY table for a manual saw can be used when working with other portable woodworking tools. To make the carpenter's craft not only pleasure, but also convenience, you can make a table for a plane with your own hands. Such a table can be made entirely of wood, the main thing is to calculate the parameters.

Sometimes you need to make a separate table for an electric planer with your own hands, which will not cause any trouble for the craftsman, since the basic structure and materials are used the same as for a manual circular table. When there is nowhere to put your woodworking tools, this is a signal that you need to make a tool table with your own hands. Here, for every master there are no barriers to creativity, since they are made from metal, plastic, wood, using various pockets and shelves. A table for tools is the main element for maintaining order and cleanliness in the workshop.

Watch the video circular table with your own hands, which sets out all the details about the manufacturing process.

Video: Working table for a circular saw

Video: milling table; milling table

Comments:

Many owners of hand-held circular saws are thinking about improving them, since this necessary household tool, despite all the advantages inherent in portable devices, is not able to replace a stationary circular saw.

The designers of some DP models decided to help consumers and equipped their products with devices that can somehow compensate for the lack of a table needed for working with materials large sizes. And yet, all design tricks, as a rule, are compromises.

How to turn a manual circular saw into a stationary one

Of course there is a way to get rid of the shortcomings portable tool— buy a stationary circular saw. However, once you own a handheld circular saw, do you plan to use it? Shouldn't you start by making your own table for a circular saw, which will help turn the DP into a full-fledged machine? As a result, you will get experience, satisfaction from the work done and, finally, the desired result.

if you have old table(dining, kitchen, writing), then it will make a wonderful bed. But it may happen that such a thing is at hand in right time it won’t turn out, so tips on how to make a table with your own hands for your DP will certainly come in handy.

For the working surface of the future machine, the so-called Finnish plywood is ideal. This material is laminated (good sliding of workpieces when sawing), thick enough (can withstand a large mass), moisture resistant ( useful quality for outdoor storage) and at the same time it is not deprived of such qualities of wood as ease of processing.

You can use it to make a table with your own hands and plain plywood 20 mm thick, only it will have to be treated with special compounds and painted. It would be even better to cover the table with a sheet of steel or PCB.

Any boards at least 40 mm thick are suitable for the manufacture of drawers, and the legs can be made from wooden blocks, steel corners or profile pipes, but 100x50 mm boards are best suited

You need to be warned before you get started that the finished table for the circular saw will reduce the cutting depth of the circular saw just by the thickness of the cover, but if your DP is equipped with a disk large diameter, then this circumstance will have little effect on the performance of the new machine.

Making the lid and sides

When making a table with your own hands, keep in mind that the length and width of its working surface must be sufficient so that the workpiece can lie flat on the table top. The accuracy of its processing largely depends on this. You can add that an electric planer and a jigsaw can also be attached to a wide table from below. Then you will have a multifunctional machine.

Cut a rectangular sheet of plywood of the required size and process its edges. On the future inside of the countertop, mark the fastening. You can lean the sole of the circular saw against the surface and trace it with a pencil, and use a saw blade to make a slot in the tabletop. If your DP will be used for cutting blanks under different angles, then the slot should expand towards the top of the table.

You can take a few millimeters of thickness from the table to try to get closer to the cutting depth specified in the passport of your DP. Make a small indentation for the sole with a milling cutter. Of course, do not abuse this opportunity (a depth of 10 mm is enough).

Now it’s time to make side boards (side boards under the tabletop), they will strengthen the structure and ensure reliable fastening of the legs. In addition, it will be possible to place fittings on the drawer to turn the tool on and off. The sides will be located 5-10 cm from the edges of the tabletop. With this in mind, cut 4 boards. Assemble them into a box and fasten it with self-tapping screws (2 fasteners on each edge).

Coat the edges that will be adjacent to the lid and the tabletop with wood glue, attach the box to it and secure the drawers together with the lid with clamps. Without removing them, screw the screws through work surface into the sides. Don't forget that the fastener heads must be flush with the surface of the table, so before screwing in the screws, drill holes and countersink them.

Table legs

Making a table with your own hands for the DP is not over. Now you need to attach legs to it. Calculate their height so that it is convenient for you to work in the future. The legs are attached to the frames from the outside and tightened with screws, bolts or threaded rods. The heads of screws and bolts, as well as nuts, must be separated from the wood with washers.

Even if you think that you have secured the legs securely, they still need to be provided with additional rigidity, because a table you made yourself will be subject to slightly different loads than a coffee table.

Spacers will have to be welded to the legs from the profile or corner, and to strengthen the supports from the boards, bars of 40x40 mm or 50x50 mm are suitable.

Necessary additions

In order not to miss a single detail when making a table with your own hands, you should know about the limiting or control strip. Some models of portable DP have it, but its stroke is not enough to work with wide workpieces.

Table circular saw: 1 - plywood jumper; 2 - steel plate; 3 - insert; 4 - saw blade; 5 - screws; 6 — countersunk head screws; 7 - bed board.

The length of the bar must match the length of the table. It can move along guides on both sides of the lid or be secured with clamps. In the surface of the table, you can make 2 slots perpendicular to the saw blade, through which the limit bar will be attached at a certain distance from the blade. The limiter can be made from a bar, a metal corner or a profile pipe.

All that remains is to make a new switching unit for the new machine. It's pretty simple work. On one of the drawers it is installed ceramic rosette, where the DP will be connected. The saw button is fixed when turned on (do not break it, but make a simple clamp from a strip of steel or aluminum, wrap the button with the handle with electrical tape). On the wire running from the socket on the drawer to the network, install any switching device that corresponds to the power consumption of the circular saw. Attach it to the sidewall in a place convenient for you.

Make a table for a circular table with your own hands, having at your disposal a hand-held power tool Bosch or another leading manufacturer, it’s not difficult. But the presence of a table will significantly expand the capabilities of the tool. Manual models Bosch circular saws, like their analogues, demonstrate high productivity. But maneuverability, as the main advantage of a hand-held circular saw, can turn into a disadvantage if you need to process a large volume of workpieces. This is where a homemade table comes to the rescue.

The design of the table required for a manual circular saw is quite simple, which allows you to do it yourself. Homemade platform requires little skill and time to make;
Drawings and diagrams are not mandatory components for successfully assembling a table with your own hands;
The optimal material for making a table for a Bosch manual circular saw is metal;
When choosing a metal table for a circular table, do not forget about the massive structure and the need to be able to work with welding machine with your own hands;
Often the table is made by hand using wood. They are easier to assemble, which allows a beginner to make them;
A Bosch circular saw or its analogues is installed under the table top;
The disk should protrude above the tabletop. For this purpose, a special slot is provided on the surface of the table;
The lumber moves along the table surface and is sawed cutting tool circular saw;
To increase the processing accuracy, the table can be additionally equipped with a longitudinal and angular stop;
The tabletop will take away part of the working disk, so the sawing depth of a manual circular saw will become less exactly by the thickness of the working table. This indicates the need to choose a hand-held power tool that allows you to install large-diameter saw blades;
It is recommended to make the desktop with an emphasis on strength and thinness. Metal or durable wood species are suitable for these purposes.

In many cases, it is better to start making a table with your own hands before purchasing the circular saw itself. This will allow you to optimally select equipment characteristics. For a manual circular saw that you want to machine on your desktop, the optimal power would be at least 1.2 kW. This will allow you to cut efficiently and without overload. large quantity materials.

Tools and materials

If you are unlikely to need the drawings, support those received in this material Knowledge of video lessons on assembling tables for circular tables will not be superfluous.

To make a tabletop that turns a hand-held circular into a tabletop, you will need certain materials and tools. This list includes:

Sheet laminated plywood. Approximate Dimensions thickness - 15-20 mm;
Wooden beam. Its dimensions are 50 by 50 mm;
High quality board;
Switch;
Socket;
Electrical cable;
Glue;
Paints and varnishes;
Self-tapping fasteners;
Electric jigsaw;
Screwdriver or electric screwdriver;
Ruler;
Household drill.

Determine the sizes at your discretion. But if the tabletop circular saw is too compact in size, you will not be able to cut long workpieces with the required comfort.

When choosing sizes, focus on the parameters of the most frequently processed workpieces. The dimensions of the table must be such that the product fits completely on the tabletop. This will allow you to use a Bosch tool to cut lumber efficiently and smoothly with your own hands.

Assembling the tabletop

When everything is ready, you can start working with your own hands. Let's assume that Bosch power tools you have already chosen, or preferred an analogue of a trusted manufacturer represented by Bosch.

The approximate dimensions of the tabletop, taking into account the selected materials, are 50 by 50 by 25 centimeters. You can make the size of your table larger or smaller depending on personal preference, the size of your workshop, or the characteristics of the Bosch circular saw you are using.

Taking a laminated sheet of plywood as a basis, cut out a tabletop of the size corresponding to the selected parameters. The plywood may not be laminated, but in this case it will need to be coated with a layer of varnish. Apply markings from below so as not to spoil appearance future table. By using electric jigsaw cut off the excess, clean the edges.
Turn the sheet over with the bottom side up and mark it for mounting the hand-held circular saw. To do this, remove the saw blade from your circular saw and place the sole of the device against the surface of the sheet. Make marks on the sheet itself and the sole for future fastenings.
Using a drill, drill the holes required for bolted connections. Screw the bolts from above through the table, and from below the structure will be held on by nuts. Here it is recommended to countersink the holes on the working side of the sheet and grind the bolt heads. They won't perform that way.
If you are going to cut material on a machine with a Bosch circular saw at different angles, the hole for the saw wheel should be made in a certain shape - an inverted trapezoid. If you plan only to cut evenly, it is enough to cut standard type groove.
Do not rush to immediately cut the hole according to the markings. Take the circular saw again, attach it to the sheet, check the size matches, after which you can continue working.
Use a pencil to mark where the stiffeners will be installed. To make them, use a wooden board. The ribs are located below, retreating from the edge of the tabletop about 8-10 centimeters.
It is recommended to mount the tabletop legs to the stiffeners. To fix the ribs, use self-tapping screws, screwing them with a screwdriver in increments of 15-20 mm. It wouldn’t hurt to additionally glue everything with PVA glue. Self-tapping screws must be screwed through the top of the desktop, while recessing the heads of the fastening elements. Using long screws, do not forget to connect the stiffeners together.
Using timber or boards, cut out blanks to create the legs of your structure. The length can be 100-120 centimeters. Here you should focus on your own height, since it will be uncomfortable for a tall master to work on a low table. If the legs diverge slightly towards the bottom, this will give them more stability. Fixation is carried out according to the bolt-nut principle. It is a good idea to use washers between them. By making a screed from timber, the desktop frame will be more durable.
You can adjust the height of the table using nuts that are screwed to the legs from below. M14 bolts are suitable for these purposes.
Now proceed directly to fixing the circular saw. Insert the disk into the made slot and secure it with the appropriate fasteners.
It is recommended to screw the socket on the inside of the table, connect the wiring to it and place the switch in a convenient but safe area. Press the on/off button onto the body of the circular saw and secure it.
Using square pipe and wing nut screws, longitudinal stop. Cut the pipe according to the length of the table for the circular table, drill holes for screws 30 mm from the edge of the table top. Using pieces of plywood, a pair of clamps is made.