Wooden workbench in the garage by hand. Workbench: design rules, manufacturing for all kinds of carpentry and locksmith work. Garage workbench

Do-it-yourself locksmith workbench in the garage is quite simple to make. The main thing is the ability to perform locksmith work: put the correct and reliable weld, work with mechanical and power tools. The work is not difficult, but requires attention and understanding of the operation being performed.

When decorating and filling the garage with equipment, sometimes it seems that building the box itself was very easy, but various little things piss me off. But you need to do it, and therefore, before doing the work, it is necessary to sort out some theoretical issues.

Design features

A homemade garage workbench is often positioned with an office desk. With its presence and features, it provides the equipment of the garage with tools, various details and equipment:

As a rule, locksmith or machine clamping devices, grinding machines are installed on the tabletop. The countertop itself is made from various materials available to the owner.
The frame is bearing element the rest of the device.
Bedside table with drawers for storing various devices, tools, Supplies. Several bedside tables can be installed not only with drawers, but also equipped with shelves.
It is possible to manufacture additional shelves between the side tables.
We fix a protective screen on the garage wall to protect the painted walls from sparks (when working on emery) and mechanical damage. It can be made perfect place to store metalwork tool and wrenches, as well as install fluorescent lamps.

Depending on the place for installation and the desire of the customer, the design of the workbench may be different, but its type does not change depending on the equipment.

Varieties of garage equipment

Do-it-yourself workbench in the garage and in industrial conditions perform 2 types:

design intended for a car mechanic;
if you like carpentry in your spare time, this box should be equipped with a carpentry workbench.

A do-it-yourself wooden workbench for carpentry can be made and installed indoors if you need it. If you are not a carpenter, he will only take up space. To perform work related to car maintenance, it is customary to install a metal or wooden structure, but it is plumbing appointment. It is better to sheathe the countertop with a sheet of steel; you can lay DSP boards. The most stable will be a metal workbench in the garage.

Instructions for craftsmen

Before work, we will prepare the tool and workpieces.

Advice! The quality of work, the time spent on its implementation, directly depend on the choice of equipment and the ability to apply it in practice. Another important factor is the quality of materials for making a desktop in the garage with your own hands.

Preparatory work

For the manufacture of homemade products, we assemble a tool. The following will help us in our work:

angle grinder with cutting and grinding wheels;
welding machine and welding electrodes (ANO-21, MP-3);
welding mask and overalls;
plumb or level;
5 meter tape measure;
electric drill and screwdriver;
If you have to work with wood, we select a reliable electric jigsaw or a hand saw.

Now we decide on the materials for the manufacture of a workbench for the garage:

First you need to determine the dimensions, make drawings or a sketch. For clarity, let's take the dimensions: length - 2 m, width - 50 cm. Based on these dimensions, we will need to purchase:

steel corner with shelves 50 mm - at least 6 m;
40th corner - at least 8 meters;
profile 40x40, wall 0.15 cm - 24 meters;
steel strip 50x5 - 7 m;
steel sheet, 1.2 mm thick - 2000x500 mm;
board 50 mm for the tabletop, the number depends on the width of the board;
board 25 mm or plywood for shelves and drawers;
MDF or fiberboard as desired, for sewing sidewalls;
Screws, self-tapping screws, paint, primer, drawer guides.

Having finished with the preparation for work, we begin to make a metal workbench with our own hands.

Step-by-step instructions for performing work

Answering the question: how to make a workbench in the garage with your own hands is quite easy. Let's follow a few instructions and rules for the work:

We cut off the blanks of the required length with a grinder.

We prepare 4 longitudinal parts for the frame: a length of 2 meters from the profile and 4 jumpers, their length is 420 mm. From the corners we cut off the stiffeners and jumpers for the shelves.

Let's start assembling the skeleton of a workbench for a garage with our own hands.

To do this, you need to build using the following scheme:

We weld the upper and lower frame and assemble the body of the workbench. To do this, we assemble the frames by welding 4 legs to them. The height of the legs is not more than a meter. The main structure is ready.
We toughen the structure by welding stiffeners from the strip and corners.
We mount and install fixtures for shelves, drawers and their guides.
The crate is assembled, for protective screen and hanging wrenches and another tool. To do this, at the corners of the tabletop, we weld the racks from the corner and overlap them on top with a horizontal corner along the entire length. For reliability, you can weld a stiffener from the strip. We sew the screen with a sheet of plywood or DSP. Then, we arrange individual places for the location of keys and other locksmith tools.
After completing the main assembly of the structure, it must be degreased and painted with any paint. The best choice, at the same time, there will be hammer paint. It is more resistant to mechanical damage.
From plywood sheet we make shelves and boxes. We assemble the boxes using small pieces of the corner and twisting them with plywood parts. We fasten the guides to the boxes, fix the handles. We impregnate with impregnation and paint over.
We fix the selected material on the countertop - it can be plywood, a DSP sheet or boards. Having previously treated with impregnation from decay, we fasten the countertop to the base with metal screws. The heads of self-tapping screws, made under the sweat, are deepened into the countertop, puttied and then painted over with paint.
On top of the tabletop we lay and fasten a sheet of metal cut to the dimensions of the table. We paint over it.
We install boxes, shelves, means of fastening the tool on the screen. We check the location of the workbench in terms of level and reliability of assembly.
Now it remains to install a bench vise, a grinding machine, put the garage belongings on the shelves and hang the tool.

All. We answered the question: how to make a workbench with your own hands.

In conclusion, it is necessary to recall some main points.

The design of the garage workbench must be stable and stand without warping and staggering. For better stability, it can be pulled to the wall on the anchor.

Organize workplace so that nothing gets in the way of your business.

All protruding parts must be turned and free of burrs.

Keep your work area clean and clear of spilled oil, chips, and other debris.

With proper workmanship and normal maintenance, your workbench will support a load of at least 250 kg and will last a very long time.

If you like to work with your hands, then a workbench will come in handy. From metal, such a design can be made independently. It will consist of a countertop, which is fixed on a metal frame.

Design features of the product

A metal workbench can be carpentry or metalwork. The first variety is quite simple to manufacture, but on the surface of the tabletop it will be possible to work exclusively with wooden details. This version of the product assumes the presence of a cover made of wood or treated with linoleum. When trying to work with a metal workpiece on carpentry workbench the coating will absorb oils and metal chips will damage the surface. Joiner's workbenches are made of wood, therefore they are not as stable as compared to metal ones.

Locksmith structures are most often used in the garage. With the help of such equipment, you can work with metal blanks. Such a piece of furniture in the workshop is universal. It is important to determine before starting work whether the countertop will be single or multiple.

A metal workbench will include a bench, a lid, and a table. The penultimate element should be endowed with three-layer sides. Metal structures are made using MDF or a thick plywood sheet, which is additionally covered with a metal sheet. It is important to exclude the presence sharp corners that may be at the countertop, which will prevent injury. It is important to provide the table with drawers that will be needed to store inventory. It is necessary to equip these components with guides that will prevent accidental falls. If there is a need to protect the wall near which the table will be installed, you can install a special screen on it.

The legs should have a large surface area as well as excellent strength. They are additionally reinforced with each other at the bottom. It is recommended to place a shelf for varnishes, large tools, and accessories at the interface points. Most often, steel workbenches are equipped with two discs that have stoppers. The presence of the clamping screw is important.

Preparation before starting work

A metal workbench can have completely different dimensions, however, the width of 60 cm can be used as the most optimal. While the length can be equivalent to 1.5 meters. The frame is recommended to be made of profile pipe or Sockets and light sources should be located near the table. For cutting metal, it is best to use a grinder. Prepare metal corners, the thickness of which is 3 cm. Their size should be 40 x 40 mm. Suitable and steel profiles, the cross section of which is 30 x 50 millimeters. You will need a metal strip to secure the desktop to the frame.

When a metal workbench is made, the worktop is usually made of dry boards, the thickness of which is 50 millimeters, while the width of this element can vary from 100 to 150 millimeters. In the process of work, you will need galvanized metal with a thickness of 2 millimeters. Strips of the same material will be needed to form the sides, which will protect against sparks. The length of one such strip should be equivalent to the length of the working surface.

Work on the manufacture of a workbench

If you decide to make metal drawings, it is recommended to prepare in advance. Parts are cut to size, and you need to connect them together by welding. If there is no need to install additional shelves, then the structure must be reinforced with stiffeners, which must be made from the same corner. They should be installed, stepping back from the floor surface 10 cm. The same distance steps down from the edge of the countertop. The same manipulation is carried out with the central part of the table. In order to provide a higher leg, square steel plates are welded on.

Features of the assembly

Drawing metal workbench, which is presented in the article (see photo above), will allow you to carry out the work correctly. After the main structure is assembled, you can start working on the frame. Using square steel corners with a side of 50 millimeters, you need to form a frame. Its length should be 20 cm longer than the dimensions of the structure. This is required to secure the vise. Then, in the place where the desktop will be strengthened on the main structure, steel strips should be welded, while the structure from the corners is installed on them. Among other things, it will be necessary to strengthen the protective screens.

If you decide to make a metal workbench with your own hands, in the corner that is used for rigidity, as well as in the countertop, you should drill holes to which the boards will be fixed. Most often, self-tapping screws with countersunk washers are used for this. In the next step, the tabletop can be covered sheet metal, which is reinforced with self-tapping screws in advance drilled holes. Shelves can be painted or treated using a fire retardant. To provide more comfortable work the part can be rigidly fixed. For this, a vice is used, which has parallel jaws. All processed elements can be fixed.

Finally

As you know, a metal workbench is very afraid of moisture and corrosion. In order to extend the life of the product, it is possible to process it with a special paint intended for working on metal. This will make the design even more attractive in appearance.

Everyone knows that a garage is necessary in order to put a car in it. However, many car owners use this room as a warehouse for unnecessary things, and if space permits, they remake it into a small workshop. Therefore, appropriate equipment is installed in it - racks, shelves and a workbench. The latter is a multifunctional desktop used for processing various materials, implementation of plumbing, assembly and electromechanical works. Workbenches for the garage can be made by hand.

Design features of the workbench

The garage workbench is often compared to desk, because it makes it easy to carry out a variety of tasks. and enables everything necessary tools keep on hand. Thus, in addition to the countertop, it has a large number of shelves and drawers. The design of the workbench consists of the following elements:

Be sure the workbench should be well lit. For this install a stationary rotary lamp that plugs into an outlet. It can be equipped on the wall, near the workbench, but it is much more practical to build electrical equipment directly into it. In this case, there will be no problems with electrification if you need to install the table in a new place.

Garage workbenches

Types of workbenches

These tables are of two types:

carpentry;
metalwork.

Carpentry is a metal or wooden frame with a wooden table top. It is best not to process metal parts on it, because traces of machine oil remain on its surface, which are very difficult to get rid of. In addition, metal chips often damage the surface of the table, as a result of which it will not last very long.

To work in the garage it is best to use a locksmith workbench, which is a universal model. Its tabletop is metal, therefore it is used for processing wooden and metal parts. A variety of actions are performed on it: sawing, cutting, sharpening, grinding. In addition, this design is much more stable than the joinery, which is very important for working with metal parts, since during work there is often strong pressure on the surface of the countertop. Tools are stored in shelves that are specially provided for this.

Material used

To make a workbench in the garage with your own hands, two materials are used: wood and metal. The difference between these designs will be in reliability and resistance to various force and mechanical influences. In this regard, a metal workbench will significantly outperform a wooden one. There are other points that should be mentioned:

It is difficult to make a metal structure with your own hands, because will require welding work and you also need to have skills in working with metal. It is also quite difficult to process an iron billet. Therefore, to make a desktop of this type with your own hands, you will need special equipment and specific knowledge.
A tree is a completely different matter. To make for the garage wooden workbench with your own hands, only a standard set will be needed home instrument - grinder, screwdriver, electric jigsaw, hammer, etc. You can even use only hand saw, but the work in this case will become a little more complicated.
If we take into account the operational and technical aspects of a desktop made of a particular material, then it is necessary to allocate a lot of weight. metal product and rather small strength of a wooden workbench. The ideal option it would be a combination of these two materials in one product, for example, make a workbench from wood, and cover its countertop with a thin layer of iron. In this case, even the use of a vice and other similar devices will not be able to harm him.

Thus, combination of materials is ideal solution for making a workbench to the garage with your own hands. However, if the desktop will not be used too often, but from time to time, then it is best to do without completely wooden structure.

Preparatory work

Before you start making a garage workbench with your own hands, you should decide what dimensions and configuration the future design will have.

When equipping a garage with your own hands it is very important to choose the right place where the workbench will be installed. The best option would be considered part of the garage, where there is good lighting and equipped electrical sockets. It is necessary to take into account such a moment as the direction of natural light. The light should fall from the left side or straight ahead. In this case working surface will always be illuminated.

The length of the tabletop should be such that it can easily accommodate the tools and large parts that are required for the job. Its width should not be more than 50 - 60 cm. This allows you to easily reach the opposite edge. One side can be equipped for electrical cutting tool: circular saw, jigsaw, etc. For this purpose, the plank is fixed in such a way that it protrudes 200 - 300 mm beyond the edge of the workbench.

Also, before you make a workbench in the garage with your own hands, you need to clarify one more parameter - its height. The convenience of carrying out the work depends on how correctly it will be determined. To determine the height, you need stand up straight, bend your arms at the elbows and mentally lean on on an imaginary table. Distance between floor and arms folded will be the ideal height for future construction.

Necessary tools and materials

To make a workbench in the garage, you will need the following tools:

a grinder with a grinding disc and a circle for cutting metal;
level;
screwdriver;
drill;
welding machine and electrodes;
roulette;
jigsaw for cutting plywood.

Materials:

corner 4 mm thick;
steel strip 4 mm thick;
steel sheet required for the manufacture of holders for boxes 2 mm thick;
plywood for the manufacture of back, side walls of the table and drawers 15 mm thick;
screws;
anchor bolts;
square pipe 2 mm thick;
steel sheet to be used for the countertop, 2 mm thick;
wooden boards for countertops 50 mm thick;
guides for drawers;
self-tapping screws for metal;
paint for metal and wood.

The design made of these materials will be reliable and very durable. Planks will be used for niches and shelves, and steel strips will be needed to create rims on the table surface.

Assembling a workbench for a garage with your own hands

After completing all preparatory work start assembling a workbench for the garage with your own hands. For this, 4 supports made of a steel corner are taken. The legs for the desktop should be the same size. In the upper part they are fastened together with the help of a corner and welding. Thus, if you look at the structure from above, you should get a rectangle measuring 100x50 cm.

The same action is done from below. At a height of about 15 cm from the floor, corner trims are welded, which will subsequently provide additional rigidity the whole structure. If such a need arises, then additional racks can be welded, which will be needed to mount shelves and drawers.

As soon as the frame is ready, they begin to make the cover of the workbench. Edged oak boards are taken, 25 cm wide and 5 cm thick. The length of the boards is determined based on the calculations made earlier. Boards are laid on top of the frame and very tightly fixed to each other. For this, along the perimeter of the upper connecting elements frame make a series of holes for the bolts.

Holes are also drilled in the boards of the countertops through which they will be attached to the frame. From the top too need to drill holes to fit the bolt heads.

After the cover is fixed, proceed to its sheathing with metal. For this, galvanized iron is used. Suitable for size a metal sheet fixed to the surface with ordinary screws. You should be aware that when cutting, burrs can form on the metal edges, so for safety, they should be processed with a file.

On this, work on the manufacture of the simplest workbench for the garage is considered completed. It is quite simple to make such a design with your own hands. For better stability on workbench legs metal corners or rectangles are welded from below, which allow you to screw the structure to the floor.

Thus, the workbench in the garage is very convenient fixture. It can be equipped with additional drawers, shelves and tool holders. A special screen is screwed to that side of the structure, which is closer to the wall, which will be used to place pliers, screwdrivers, wire cutters, etc. on it. A do-it-yourself workbench is often no worse than a purchased one.

Car repair is a difficult and troublesome task. To facilitate this work and create favorable conditions, you will definitely need to make a locksmith table. The drawings and diagrams for this may be different, but the principle of how to build a convenient workbench for a garage with your own hands is the same. The device should be compact and not take up much space.

It is best to build a prefabricated workbench so that it can be folded or stowed away. A simple design can be made entirely of wood. This inexpensive material quite easy to find and very easy to process. But wooden products there is a drawback - it is a tendency to burn. To make a less dangerous and more reliable locksmith workbench, you need to make homemade design from metal. However, due to the simplicity and ease of construction, most motorists most often choose wood.

Necessary materials:

wooden blocks;
various boards;
hinges;
nails;
screws.

First you need to decide on a place for the construction of a locksmith table. If the area is long enough, then it is better to install a workbench against the back wall opposite the gate. This will make it possible to do work when the car is in the garage. With this arrangement of the workbench, the side aisles will remain empty, which will be very convenient for car repairs. When the room has more free space in width, then the best option installation will be on the side. For Russian models on the left wall, and for foreign cars on the right, which will ensure safer entry and exit of the car from the garage.

simple model

To do this, you need tools:

screwdriver or screwdriver;
ordinary drill or brace;
hand saw;
simple level;
small roulette;
sharp ax;
hammer.

It is not difficult to design and install a homemade locksmith table in the garage. But first you need to determine the place, and then choose the material. To build a simple workbench, any boards and wooden blocks are perfect. This is the best way, where rather modest knowledge at the school level is required. In addition, the cash costs will not be so great, since old bars and boards can be used to build such a table. Since wood is easy and quick to process, the entire construction of a wooden workbench will take very little time.

When the preparation is over and found suitable material, then you should first start building the frame. To do this, you need to take measurements of the future table in the garage in the place and cut 4 bars for the bed on them. Of these, two long ones will be located along the wall, and short ones perpendicularly. Next you need to make the legs. The height of the workbench in the garage should be just below the waist, which will provide ideal working conditions.

After all the bars are sawn, they are connected into a frame. This is easy to do with simple nails or screws. Next, the entire structure is turned over on its legs and installed tightly pressed against the wall. In conclusion, prepared boards are nailed on top of the nails and a simple wooden workbench is ready to work. Often, many motorists cover the top of the table with tin or sheet steel. This not only increases strength, but also improves safety in the event of a fire during various welding operations.

Folding workbench

Usually, in order to save money, garage buildings are made small in volume. In a small building with limited space, there is rarely enough free space to accommodate a locksmith's table. In the case when the length and width of the garage does not allow the installation of any device, a folding design is used here. The advantage of this method is that in the normal assembled state the entire table is removed and completely frees up space, but there is a drawback. To work on a folding workbench, you will often have to drive the car out of the garage, which is very inconvenient in car repairs.

The folding wooden workbench has the simplest and cheapest design. Therefore, such a construction will require a minimum of materials and time. At first you must choose the best place in the garage. Then make the correct measurements with a tape measure and draw a simple drawing from them or sketch a diagram by hand. It will be easy to calculate the amount and consumption of materials from it. Any wooden blocks and old boards are perfect for this.

First make a countertop. Prepared bars are marked with a tape measure and sawed off to size hand saw. Then they are folded into a quadrangle in the form of a box and fastened together with nails. Next, boards of the same length are sawn, nailed to the bars, and the tabletop is considered done. Two hinges are immediately attached to it with screws and screwed to the garage wall at waist level.

It turns out interesting table, which in one position will hang on the wall, and in the other it will rise and be installed horizontally. To fix the tabletop in the working position, it is necessary to make legs. To do this, cut off two identical bars with a hand saw, which, using screws, are screwed to the free corners of the frame on the hinges. In this position, each leg of the table, like the entire structure of the folding workbench, will also fold easily.

Homemade metal equipment

This will require materials:

metal corner;
cuttings of iron pipes;
tin or sheet steel;
bolts, screws, nuts;
hinges or hinges.

Every motorist tries to make all the devices in his garage reliable and safe to use. Although the locksmith table made of wood is assembled very simply and quickly, but this design is not very durable. Often, additional new equipment is installed on top - this is emery, a vice, drilling machine. This requires a fairly strong and stable foundation. In this case, iron is used for construction, which is much stronger than wood. metal structure the workbench will not only perfectly withstand any load, but is not at all afraid of fire.

To build a metal locksmith table, you need to prepare all the materials. It can be an iron corner or a channel, pipe trimmings and sheet steel. Also during construction you need to find a tool for working with metal:

welding machine;
electric grinder;
ordinary screwdriver;
powerful hammer;
spanners.

A metal workbench in the garage is installed taking into account the free space. You need to make it so that there is enough free space for car repairs. On a narrow and too small locksmith table, it is difficult to place additional equipment. Therefore, it is desirable to make it maximum dimensions, which will allow you to install not only a vice and emery, but also other devices. For example: a small drilling or lathe.

Assembly process

The construction of a workbench is always started from the top - the table top. From an iron corner or a channel, a grinder cuts off small segments to fit the table. Then, on a flat floor, they are folded into a rectangle and connected by welding. Inside, additional spacers are also installed between the sides, which will make the frame much stronger. The top of the countertop is usually made from pieces of tin or sheet steel. They are evenly laid on the frame of the future table and are made around the perimeter with a drill through holes for screws or screws.

When the countertop is completely ready, proceed to the construction of supports. For durable table legs, metal pipes are usually used. They are cut with a grinder at the level of the belt and attached by welding to the four corners of the made platform. So that the supports do not diverge in different directions under heavy load, they are fastened together with a profile corner or a channel. Then the table is turned over and pushed tightly to the most convenient wall of the garage. The workbench is ready, and you can start repairing. But this is not the end of the construction, but they continue to equip with additional equipment - a vice, emery and other devices.

How to deal with vibration and clutter

Vibration occurs on the workbench during hammer blows and machine operation. At this time, all tools and repair parts begin to move and fall off the table. You have to spend a lot of time searching, which is especially annoying for every motorist. Coping with this drawback is very simple: along the edge of the entire perimeter of the tabletop, a small rim of a corner or a metal tape is attached by welding.

In order to always have order on the workbench, it is necessary to equip a place where all the tools and remaining parts from the repair will be stored. The best way to remove unnecessary tools is to put up a rack. It should be mounted on the wall directly above the table. Usually the rack is made of a sheet of metal, shelves are installed on it. And it is also desirable to make hooks on which the tools will hang. It is very convenient when they are in front of the eyes and do not interfere with work.

Often, drawers are made to store car repair parts and various fasteners. They can also easily accommodate large tools that take up a lot of space on the rack. To do this, additional racks and guide rails from a metal corner are installed at the bottom of the table. The boxes themselves are made of sheet iron in the form of boxes with one handle. After installing the rack and drawers you will be able to deal with the clutter that prevents you from working comfortably.

Folding option

There is a situation when the garage does not allow you to make a good workbench. In this case, it is best to choose a folding option that does not need a lot of space. In the free space, you only need to weld a simple box in the form of a chest from metal, and attach the wings to the hinges to it. As needed, it will always be easy to open them, which will significantly increase the area of \u200b\u200bthe table.

Before starting construction, it is necessary to cut 12 identical corners with a grinder according to the size of the free space. Then, using cooking, assemble the frame in the form of a cube and attach a flat sheet of tin or sheet steel to the top. You get a small table that is perfect for small repair work. To make it longer, you need to make additional metal wings. Their dimensions must match one of the sides of the frame.

First, you need to cut off 4 corners with a grinder, which will correspond to the edges of the table. Then fold them in the shape of a square and fasten them using ordinary electric welding. On the resulting frame, you should put a sheet of iron, and then cut the edges evenly. Next, drill through holes around the entire perimeter with a drill, insert bolts there and tighten with nuts. To make the wing easy to raise and lower, you need to attach 2 hinges.

With the help of a welding machine, this is done very simply. One end of the hinge loops is connected to the wing, and the other to the main frame. Fixing the movable plane in a horizontal position is easy. It is only worth making metal pipes two legs and attach them to the free corners of the wing on the hinges.

It often happens that the increased table area is sorely lacking. In this case, it will not be difficult to make another duplicate and attach it to the opposite side of the frame. In this case, you get a long desktop. If you attach an additional wing to the side, then this design will fit perfectly in the corner of the garage. The advantage of a folding metal workbench lies in the fact that its configuration can always be changed at the request of each motorist.

The metal workbench is a desktop with a wide range of purposes. It allows you to carry out locksmith, repair, electric installation work, processing of various materials. A workbench should be in any home workshop. Masters prefer to design it with their own hands to make it as convenient as possible for themselves.

nuts and screws;
file and hammer;
paints with a brush.

Device locksmith workbench- this is a rigid metal base (made of corners or a square pipe). To decorate the countertop, it is better to use a 50 mm beam. A steel plate up to 6 mm thick is stuffed on top of it. To fasten all metal parts, use welding, but you can also screw in bolts.

Mounting the frame of the workbench and the base for the tabletop

Before proceeding directly to the assembly, carefully look at the prepared drawing. Once again, make sure that the dimensions of the future workbench fit into the dimensions of the room where your metalwork tool will stand (garage, shed or workshop). The installation of the table begins with the creation of the frame:

From the corner cut 4 legs of the same size.
Connect them at the top with horizontal bars of the same material. Use welding. The result should be a rectangle (top view) of the given size.
Additionally, make a stiffness line by once again fastening the legs in the same way with horizontal jumpers at a height of about 15 cm from the floor.
If you have a cabinet with drawers on the side under the cover of the workbench, then weld a couple of additional supports for it.

After that, you can start assembling the countertop:

make holes for bolting along the perimeter of the horizontal metal crossbars;
cut the boards to the length of the table;
lay them to each other without cracks and gaps, secure in this position;
make holes in the wood to match the holes in the corner.

Advice. On the top side of the boards, the holes should have extensions. The bolt heads will go deep into them to wooden surface the table top remained flat.

The final stage of assembly of the workbench

The tabletop will be ready after metal plating. To do this, simply cut a fragment of the required size from the prepared sheet and fix it to the wood base using self-tapping screws. Please note that after screwing them in, burrs may remain on the metal. They should simply be filed with a file.

If you have provided boxes or shelves in the design of the workbench, use the simple technology for their manufacture. As a material, ordinary 15 mm plywood is suitable. The boxes are assembled with screws. One accounts for about 15-20 pieces. Shelves are easier to attach to the corner, but for boxes you will have to additionally buy guide strips - skids. They are welded to the frame.

The same plywood can be sheathed on the sides of the table and make a screen on its back side. For greater stability, the masters recommend attaching rectangles or pieces of a corner to the bottom of the supports. A welding machine will help in this matter. If necessary, screw a vise to the workbench. Finally, treat all steel structural members with metal paint to avoid rust.

Making a workbench for metal work is not very easy, but it is quite possible if you approach the matter responsibly. But you will be convinced that not a single purchased table can be compared in quality with a hand-assembled product.