How to beat a doorway without a door. Doorway without a door: necessity or design decision? What can be done with an opening equipped with a door

Sections of the article:

Interior doors are the most advanced variant of zoning living space, providing the proper level of privacy for family members. If privacy is not required, zoning functions are assigned to a doorway without a door.

The absence of a door leaf is compensated by a small increase in usable living space, more convenient options furniture placement, improvement interior design, which is especially important when operating small-sized housing. Finishing a doorway without a door in a certain style is made taking into account design recommendations.

Doorless openings: features of the device and installation

The arrangement of such a structure provides complete dismantling door frame, as well as the choice of the shape, size and decor of the opening in accordance with the interior of adjacent rooms. Classic shape opening is a rectangle. The choice of an arched structure is determined by the height of the ceilings, structural features bearing walls and unloaded partitions.

Usually basic and decorative trim an opening prepared for modernization without a door is made using the following materials:

• Panel plastics;
• Polyurethane stucco;
• Natural or artificial decorative stone.

Additional decoration of openings is realized with the help of screens and curtains. When choosing, materials that are easy to install and maintain and do not lose their characteristics during the entire period of operation are popular.

Advantages of open openings

Hinged and sliding interior doors are important elements of interior decoration. On the other hand, they take up a lot of space, so in small apartments, arranging a doorway without a door is justified in every way.

Open openings create a visual effect of increasing the volume of connected rooms, improve ventilation and improve the layout of interior decoration. Doorways without a door are appropriate for connecting a living space with an insulated balcony space. The efforts and material resources spent help to fully or partially compensate for the shortcomings of the standard layout of city apartments, as well as standard projects private houses of country and cottage type. An exception is the free layout of housing, which provides for arbitrary placement internal walls and partitions.

A characteristic feature of finishing a doorway without a door is the moderate cost of the materials used and the possibility of mastering the entire scope of work with your own hands. The total cost of such a finish is lower than the price of the door and the cost of its professional installation.

A doorway without a door will be the best solution for the interior. As you can see from the photo in our article, you can implement such a finish in any interior of any room. The owner of a house or apartment with a moderate investment of time and money can do all the work on his own.

Installation of slopes and plasterboard arches

The budget option for decorating a doorway without doors is based on the use of drywall:

• The material is easily processed with conventional tools;
• Smooth and smooth surface panels reduces the amount of preparatory work to a minimum;
• The wrong side of the material is characterized by excellent adhesion with gypsum-polymer adhesives;
• Moderate 20 year resource drywall constructions offset by their affordable cost, simple installation, wide choice surface decor.

To fix the lining of the arched structure, a frame is mounted from a mounting bar or a metal profile. For finishing surfaces with a complex configuration, a thinner and lighter ceiling plasterboard is recommended, which differs from wall plasterboard in increased flexibility.

The use of moisture-resistant putty and a connecting reinforcing tape greatly simplifies the sealing of assembly joints. When choosing a putty, it should be borne in mind that acrylic compounds are highly durable, while gypsum ones are perfectly polished. This is especially important for paint and varnish decor.

Making an opening with plastic

When making doorways without doors are actively used plastic panels. The offered range includes materials that perfectly imitate appearance and the texture of precious woods, natural stone and other more expensive materials.

The plastic decor of the doorway without the use of a door in color, pattern, contrast and texture of the surface must match the wall decorative coating. Using the right combination of these characteristics, it is easy to visually increase the size of the opening and ceilings.

Self-installation of plastic cladding does not require professional qualifications. If you have certain skills, all the work is done by home craftsmen on their own.

Advantages of polyurethane stucco

Polyurethane stucco molding can also be used to decorate the opening. For small-sized housing, materials with a low-relief pattern are recommended. The choice of volumetric stucco is justified when decorating rooms with high ceilings.

The polyurethane surface is compatible with most paints, so decoration for openings without doors, artificial stucco has great potential. The material is securely fixed special glue, the minimum weight does not load the opening wall, moderate heat resistance is compensated by the presence of flame retardant additives.

Features of finishing the opening with stone

The most beautiful and durable finishing decor is natural stone. The material is characterized by unique wear resistance, looks great in daylight and artificial lighting, and is fully available for adhesive mounting.

Not the largest operational resource of artificial decorative stone is compensated by its light weight, affordable cost, a wide selection of color and texture options, including the perfect imitation natural materials. It is quite simple to arrange a doorway without an interior door with an artificial stone on your own. This is facilitated by excellent adhesion of the material with cement-polymer adhesives.

Options for laying stone cladding of the opening

In the first version, a edging with smooth edges is laid out, in the second, it is proposed to create an original “torn edge” in terms of perception, consisting of fragments of a stone laid out in a natural guise. Before installing stone cladding, a doorway without a door needs to be leveled, cleaned from the remnants of the previous decor. To improve adhesion, the surface is primed with solutions compatible with mounting adhesive.

The list of design developments for finishing the opening includes the option of cladding with clinker materials that successfully imitate the appearance of natural stone or old masonry. Clinker is characterized by very high wear resistance, preservation of the original appearance throughout the service life.

Criteria for choosing a classic and arched design of openings

According to designers, arched structures provide more opportunities to improve the visual perception of the interior. The creation of arches is justified in rooms with narrow corridors, since not only the interior design is improved, but also the comfort of using the premises.

In housing with standard ceilings, arches with a slight rounding look great. The corner radius of such structures exceeds the width of the doorway by a little more than half. Sloping arches go well with different styles interior, visually increase the height of ceilings.

For the design of openings in a house with high ceilings, classic arches are recommended, in a non-standard version - trapezoidal, elliptical or original asymmetric. For example, for a doorway without a door connecting the corridor and the living room, the choice of a design with slopes that mimic the appearance of semi-columns is justified.

Empire and baroque styles look great in spacious rooms, but the presence of a large number decorative elements in small houses and apartments reduces the advantages of these styles to a minimum.

Designers are advised to give preference to symmetrical structures, decorated with low-relief polyurethane moldings or gypsum relief overlays installed at the top of the opening.

The desire to complete an arched structure on its own is realized by acquiring an arched blank or mastering the skills of working with plasterboard panels.

What restrictions exist in the arrangement of openings?

In some types of block walls and partitions, door frames are used as load-bearing elements. Dismantling the door frame can provoke subsidence and the formation of cracks in the wall, so such openings should first be reinforced with a power frame.

Such a design will ensure an even distribution of the load on the walls, which inevitably appears when openings are made with stone or finishing materials of similar weight.

In addition, you should think about the environmental friendliness of cheap plastic panels and the heat resistance of polyurethane finishing materials. The problem is solved by using high-quality branded plastic panels and polyurethane products with a high content of flame retardant additives.

Every owner of an apartment or a private house dreams of decorating it in a stylish and original way. After all, the interior of the home speaks of the taste and life position of its owner. Unfortunately, most typical buildings are characterized by cramped rooms, so when decorating such rooms, the main goal should be to expand the space. Interroom doors visually compress the dimensions of the premises, and also create a dead zone, which is not always functional. Great outlet for small apartments- this is the design of a doorway without using a door. How beautiful it is to fit such a passage into the interior with your own hands - read on.

If you want to expand the space of two adjacent rooms, or just dream of interestingly beating the layout of your house, then one of the best options for you is to create an open doorway between the rooms. Such modern design will fit well into absolutely any interior and will be a great find for small apartments.

In this way, you should not finish the doorway leading from the bedroom to common room as this part of the apartment requires privacy. However, the arch, which serves as a passage from the living room to the kitchen, will add a special charm to your home.

Of course, an interior portal will not be able to 100% distinguish between neighboring rooms, however, for space zoning, it is the best fit. This finish has a lot of advantages, thanks to which, it can successfully replace a doorway with a door.

Advantages of open interior passages:

1. This technique will allow you to combine two rooms with different functions into one. It would be especially appropriate to decorate the entrance to the living room, library or kitchen with an arch.
2. With the help of open doorways, you can make the interior with the most unusual design. A huge number of finishing materials for such structures and different variations of forms will help to realize any fantasy.
3. Open interior passages do not need to be looked after, while door hinges need constant lubrication.
4. Ennoble the arch without door structure much cheaper than installing modern door with attractive appearance.
5. Sheathing an interior portal is quite simple. Unlike installing a door, even a person who does not have experience in conducting finishing works.

Such input structures have only two drawbacks: the impossibility of complete privacy, and a decrease in sound and smell insulation properties. In relation to a fairly voluminous list of advantages, these disadvantages do not seem critical, but they negate the possibility of installing open portals in bathrooms and bedrooms.

Options for finishing a wide doorway

One of the main advantages of finishing interior passages without using a door is the possibility of using the most different materials. Due to the variety of design options for such portals, they can fit into almost any interior.

The best options for finishing interior portals:

1. A wide doorway can be trimmed with plastic panels. This type of finishing materials is quite cheap, but it looks attractive. Especially popular are PVC panels that have a visual resemblance to wood. Such an imitation is outwardly almost indistinguishable from natural materials, so it will be a great addition to interiors in classical style. Modern designs can be decorated with an interior passage trimmed with a bright plastic frame.
2. Polyurethane stucco molding is an excellent frame for luxurious classic interiors. However, do not rush to decorate portals between two small rooms in this way, as this type of decoration tends to hide free space. Polyurethane stucco molding looks very similar to its gypsum counterpart, but its weight is much lower, and the cost is not so high. Another advantage of this material is the ability to paint the doorway, decorated with it, in absolutely any color.
3. Artificial stone, despite its high cost, remains one of the most popular design options for a doorless interior passage. The manufacturing technology of such materials implies the possibility of obtaining absolutely any color. The perimeter of the arch is decorated with decorative stone, however, it is possible to clad a large part of the wall around the entrance element.
4. Clinker is a tile imitating brickwork. Such material can be seen on the facade of the building, but it is also suitable for ennoblement. doorway. As well as fake diamond, the clinker is placed around the interior portal. To make this design look more interesting, the edges of the material are not cut at the same level, but left in their natural form. Especially harmoniously, artificial brick fits into the loft style.

There are other options for finishing doorways without doors, but the ones given by us are considered the most successful. Having a well-developed imagination and basic knowledge in the field of finishing work, you can decorate the interior portal in a more original way.

If you want to improve the doorway, spending a minimum of money, use a regular laminate to finish it.

It is not necessary to use expensive materials to decorate the arch. For modern interiors the usual painting of the doorway is more appropriate.

Form of finishing the doorway without a door

The doorway differs not only in the way of finishing, this element of the interior of the room can be given absolutely any shape. In this way, you can subtly emphasize the style of interior design.

What forms of doorways without doors are:

1. A rectangular passage is the simplest version of an interior portal. This form of openings is the easiest to work with.
2. The arched passage looks original and stylish. It will perfectly complement both classic and modern interiors.
3. Asymmetrical arches are the most unusual way doorway design. Such passages are not located exactly, but obliquely. Asymmetry looks most advantageous in newfangled unusual interiors.

These design options for doorways look equally good in different interiors. Before deciding on the shape of the interior portal, think carefully about whether you can bring your idea to life.

How to make a doorway without a door with your own hands

To make an open passage between the rooms with your own hands is within the power of everyone. The main thing is not to overestimate your capabilities and choose portal options that you can master the creation of.

So the conversion of an interior doorway into a simple rectangular opening without doors does not require special skills and special documents. These works involve only the dismantling of the door frame and the decorative finish of the resulting portal.

If you want to give the interior passage a different shape or even expand it, then you will have more worries. First of all, you will need to get permission from the housing authorities. Then dismantle old finish and get rid of the extra parts of the wall. After the dismantling work is completed, you can move on to strengthening and leveling the resulting opening, as well as giving it the desired shape.

If you live in high-rise building, then in order to dismantle part of the wall, you will have to obtain permission from the utilities. Otherwise, you may get in trouble with the law.

Finishing doorways decorative materials- This is a fairly simple step. You can choose any option you like and use it according to your idea.

The original doorway without a door (video)

Doorways without doors - it's not new, but it's enough original way decoration of interior passages. You can use it in absolutely any style of interior. Trust your taste, do not be afraid of non-standard solutions, and your interior will delight you with its individuality!

Entrance door trim

Sometimes combining the space of adjacent rooms is the most optimal planning solution. The reason for this is both the banal lack of space, in which every square of living space counts, and considerations of the aesthetic perception of the interior.

And then, if we judge purely practically: the door is far from always needed - so why spend money on buying it. It is much easier, in accordance with the concept of the style of interior decoration, to frame the doorways with stucco molding or veneer them with wooden planks.

If you just take and remove the door from the hinges, the bare box in the opening will not look good. The half-loops and the reciprocal level of the lock will be an eyesore and break the harmony in the interior. To avoid this, an opening in which there is no door can and should be beautifully lined, after which, as they say, it will become the very “icing on the cake”.

Use of door extensions

The first question that the reader may have is: “Is it necessary to dismantle when ennobling the opening? door frame? It can be left, but only in one case - when the opening is improved with wooden extensions, and provided that the old box is installed evenly.

• If the tree is worn out, it is better to remove it and level the opening with ordinary planed boards 15-20 mm thick. Their width is selected according to the thickness of the wall. The blank for the horizontal bar is sawn along the width of the opening, and two side posts are cut out along its height, minus the thickness of the crossbar that will rest on their ends.

• If the door slopes are uneven, then wooden wedges are inserted under the leveling strips, checking the correct position of their level. The gap formed between the board and the slope surface is filled with mounting foam, allowed to dry, and only then they start cutting and installing decorative strips.
• Their role is played by extensions used for facing slopes in deep openings that cannot be covered with a box. In our case, they are installed on top of an old box, or a frame from a board, which is done solely for the sake of alignment.

• If the opening is even, then, in principle, it is possible to mount extensions directly to the base base. But then they will have to drill holes for dowels, which, no matter how you hide, will be visible. You can use decorative caps, but they are regularly lost, leaving the attachment points in plain sight.

Note! When the extension is mounted to a wooden box, then micro-studs can be used as fasteners, which go into the thickness of the plank and remain almost invisible. But for this you need such a tool, which you see in the photo above.

• Cutting and installing extensions is performed similarly to the elements of the leveling frame. Now that you have perfectly even slopes, mounting the cladding on them with your own hands is as easy as shelling pears. The main thing is not to damage the front surface of the decorative strips when cutting.

In addition, it is very important to make high-quality cuts, which is not always possible when working with a hacksaw. It is best to use a miter saw for this purpose. It is simply indispensable in the case when the doorways are framed with stucco molding, which will be discussed in the next chapter.

Framing with polymer molding

Gypsum stucco molding today is used only for decorating rooms in the Rococo, Empire or Renaissance styles - and even then, designers have long interpreted them in a modern way. Working with gypsum is more difficult, and the price of such a finish is higher, so the best alternative to it is polyurethane stucco, made in the best traditions of classical architecture.

Duropolymer vs Polyurethane: What's the Difference?

Relatively recently, such a thing as duropolymer stucco has appeared. What is it and how given material different from polyurethane? And this is a composite that high pressure made from polystyrene. It has a high density - and, accordingly, strength, which compares favorably with polystyrene.

• The negative qualities of duropolymer products include a greater weight than polyurethane and a rather meager assortment. The advantage is excellent mechanical strength. This property is doubly valuable when it comes to, because it is clear that in the process of bringing dimensional furniture into the room, there is always a danger of hooking and damaging the decor.

• In appearance, duropolymer lining is almost impossible to distinguish from polyurethane stucco molding. Such a kit, which you see in the picture above, costs about 3600-3700 rubles. To clad the opening on both sides, two of these sets are required, plus two long and one short inner panels.
• Door frames made of polyurethane moldings are usually not sold as a set, but are made up of individual elements to the taste of the customer. It can be a composition of sandrik or cornice, moldings, which in this case play the role of architraves - as well as consoles, rustications and keystones. All details can be selected according to style and size, and alternate them when facing as you like.

• To decorate the side surfaces of the slopes, as well as the walls adjacent to the opening, you can use panels that imitate, beautiful bas-reliefs. Importantly, the flexibility of polyurethane products allows you to veneer not only straight, but also spherical surfaces, and in the vast majority, they are used today to design arches.
• The selection of stucco cladding for openings allows you to show your imagination - but, of course, this should not be a chaotic set of details. The pattern of the opening needs to be well thought out, correlated with the decoration of the room as a whole, as well as the design of the door panels, if they are nevertheless installed.
• Both duropolymer and polyurethane door decor are mounted in the same way: adhesive method, on a flat, puttied and primed surface. Slope leveling can be done both wet and dry.

For example, if initially there was no opening in the wall, the metal frame, which is made for the purpose of reinforcement, can only be hidden under the plaster. Applied on a steel mesh, in this case it is part of the technology, and is performed even when the walls in the room, and accordingly the openings, are sheathed with drywall (see).

A little about installation

A small instruction presented in this chapter will help you deal with the installation of polyurethane stucco. By and large, there is not much difference where exactly it is installed: on a wall, ceiling or in an opening - the technology will be the same.

So:

• Before decorating openings, products must be adapted to environment , so they need a day or two to lie down indoors. Since the installation of the decor is carried out using adhesive, it is very important that the surfaces with which the adhesive will come into contact are clean. Therefore, it is desirable not only to remove dust from them, but also to degrease the back side of the products with a solvent (but not acetone).
• Work should be carried out at temperatures above +10 degrees. Installation of stucco decoration is recommended to be carried out before proceeding with the finishing of ceilings and walls. When cutting moldings, it should be borne in mind that it takes about 10 cm of their length to cut corners. In this case, it is also necessary to keep in mind the repetition of the pattern, if any, on the front surface.

• When working with polymer stucco, you should have tools such as a level, goniometer, tape measure, furniture stapler, kit rubber spatulas, glue gun, hacksaw, Miter saw, stationery knife. As for consumables, you need to have two types of glue: mounting and docking.
• It is very important that the plastered or puttied base on which the stucco will be glued dries well. Otherwise, the decor may peel off, which will ruin not only the work, but also the material. On the base base, the products are put on mounting glue, and when joining the decor elements together, they use glue.
• Mounting adhesive is applied to the end of the stucco product with a layer about 5 mm thick. The stucco molding should be pressed tightly against the wall, and the excess that has come out should be immediately removed with a spatula. After joining the horizontal and vertical frame elements with glue, they are additionally fixed with metal brackets.

• After about a day, but not earlier, it will be necessary to cut off the excess docking adhesive. This is perhaps the most painstaking work. It should be done very carefully, since the joints should not be visible - the appearance of the door frame depends on this. Products made of polyurethane are sold already primed for painting, so that after removing the glue, you can start puttying.

For this purpose, either a special elastic putty is used for finishing polyurethane, or an adhesive white color, which, as "two in one", can be used both for mounting stucco molding and for finishing joints. After the puttied joints have dried, their surface must be sanded sandpaper with fine powder, remove dust - and you can start painting.

Ensuring the privacy of each family member in big apartment placed on interior doors. If there is a lot of living space, and there is no need to fence the space, you can beautifully equip a doorway without a door. The absence of a door leaf between rooms is enough practical option expansion of space. This is especially true for small apartments. Also, thanks to this solution, you can more conveniently arrange pieces of furniture. Finishing a doorway without a door is definitely a profitable solution. It is worth learning more about the features of its implementation.

Features of doorless openings

This design is equipped in such a way that the door frame is completely eliminated. You also need to choose the size of the opening and its shape. The interior is determined by the design solutions present in the adjacent rooms. If an arched structure is chosen, it is necessary to take into account the height of the ceiling and the location of the load-bearing walls. Photos of doorways without doors can be seen below.

Usually the standard decision that is made in such a situation is a decorative finish using the following materials:

• panel plastic;
• artificial or natural stone;
• polyurethane molding.

As additional decorative elements, you can use curtains and screens. Particularly popular are materials that do not lose their characteristics even after many years of operation.

Advantages of an open door

One of the popular solutions in terms of equipping openings is the device sliding doors. They do not require much space for installation, so they are often mounted in apartments with small dimensions.

Properly designed open openings look quite attractive. They create the effect of combining adjacent rooms. Also, this solution improves the quality of ventilation of the apartment. Such openings also look great if they open onto an insulated balcony.

Thanks to the equipment of the doorless space, it is possible to fully compensate for the standard layout. It's worth the money and effort. to one of distinctive features such openings is to reduce the cost of materials that will be used to design a doorway without a door.

A doorway (for example, to the kitchen), not equipped with a door leaf, is an advantageous solution for the interior. The implementation of various finishes, presented in the photo in the article, is original and emphasizes the individuality of the apartment owners. Work can be done by hand.

Drywall arches

One of the cheapest options for decorating an opening without a door is to use drywall. Material Features:

• it can be cut with an ordinary knife;
• due to the smooth and even surface of the material, its preparation is carried out in a minimum amount;
• the wrong side has a fairly high degree of adhesion with various adhesives;
• the service life of such material is 20 years of continuous operation.

To fix the cladding, you will need to install the frame of the arched structure. It is usually made from a metal profile. A mounting bar can also be used. First, wall drywall is mounted, and on top - facing.

The use of waterproof putty, as well as special tape allows you to close the seams much faster. When choosing a material, it should be borne in mind that acrylic-based compositions have a fairly high strength. Unlike them, gypsum products are well polished. This property is especially important for paint and varnish processing arches.

Making an opening using plastic

In the process of designing doorless openings, plastic is often used. A variety of panels allows you to choose from many interesting options. Such products can imitate various textures, including wood and stone.

The plastic decoration of the opening without a door is usually selected according to the pattern, as well as the color and texture. This allows you to create an interior in which all the details will look as harmonious as possible. At correct selection characteristics of materials, you can increase the space visually.

During the finishing of the opening, it is not required to invite specialists. If you have certain skills in such work, the whole process can be done independently.

Polyurethane molding

Often, polyurethane moldings are used in the design of doorless spaces between adjacent rooms. If the work is carried out in a small apartment, it is better to pay attention to materials that have a low-relief pattern. Volumetric stucco is appropriate only if there are high ceilings.

One of the advantages of polyurethane is the ability to paint it with any paint. For this reason, such a coating is quite often used in the design of openings without doors. The material can be easily fixed with a special adhesive.

Stone in the finishing of openings

Stone is one of the most attractive and durable materials used in interior decoration premises. It has a high degree of wear resistance, and also has a beautiful appearance. It is easy to attach with glue.

Artificial stone loses to natural in terms of service life, but its lightness compensates for this. Also, this finish is inexpensive. There are many models of artificial stone in different colors on the construction market.

Stone cladding methods

There are several options for how to lay stone elements when facing an opening. One of the most common is the way to make edging with smooth edges. This cladding looks neat and stylish. The second option is torn edges. Before starting the installation of tiles, all surfaces of the opening should be leveled. To increase adhesion, the surface should be primed.

An interesting variant of clinker cladding. Such products perfectly imitate the old masonry. natural stone. Clinker masonry is characterized by increased wear resistance, as well as the preservation of the original appearance of the material even after years of operation.

How to choose the type of opening

According to the opinions of designers, arched structures have great potential to increase the external attractiveness of the opening. The rooms look more interesting. It is especially worth considering the implementation of an arched doorless opening in the case of narrow corridor. Thanks to this solution, you can improve not only the interior design, but also increase the convenience of moving around the apartment.

If the apartment has standard ceilings, you can make an arch that has a slight rounding. Typically, the radius of such structures is selected based on the size of the doorway. The radius should be twice the width of the free space under the arch.

Important! Sloping arches visually increase the space, raise the ceiling, and can also be combined with many interior styles.

To decorate an opening with a high ceiling, you can use arches of an unconventional shape. For example, they are trapezoidal, elliptical and asymmetric. If, for example, an arch is erected over the space between the corridor and the living room, you can make it in the form of a structure with slopes that mimic half-columns.

Openings made in the Baroque or Empire style look interesting. If the apartment is small, do not overload the space with small elements. This will visually reduce the space.

Many designers pay more attention to symmetrical designs. If you decorate such an opening with low-relief polyurethane stucco, you can get great view. To complete the arch, you should understand the rules for working with drywall, as well as purchase the necessary materials for the frame.

Restrictions

During the arrangement of the opening between the rooms, certain rules of work should be taken into account. There are several limitations that require close attention. For example, block partitions are often installed in apartments, in which the door frame is a power element that supports the wall. In this case, its dismantling may lead to subsidence of the partition and the appearance of cracks. For this reason, such openings are first strengthened.

Such frames provide uniform distribution of the load on the walls. For example, it rises if the opening is trimmed with stone. You should also think about the environmental friendliness of materials. If you buy too cheap products without thinking about their quality, the consequences can be unpleasant.

conclusions

Thus, finishing an opening without a door is a fairly popular method of arranging the space between two rooms. This allows you to add interesting details to the interior, as well as visually enlarge the premises. There is enough a large number of finishing options for openings.

Arched structures are very attractive and can be installed in apartments with any style. However, when choosing this option, it is worth considering the features of the layout of the living space.

Materials for finishing the opening can be very different - polyurethane stucco, stones, clinker tiles, plastic panels. This variety allows you to choose the most suitable option for your apartment.

There are various options for finishing the doorway. They help to achieve harmony and stylish design premises. It must be borne in mind that these structures are divided into two types, which depend on the presence or absence of a door leaf. It is this element that determines the sequence of activities carried out in order to obtain the desired effect.

Ways of facing openings without door panels

Finishing a doorway without a door is carried out in two main options:

1. Standard. This technology provides lining of openings various materials without changing the design.
2. Arched. This method lies in the fact that the configuration of the opening changes - significantly or slightly.

Each of the methods requires compliance with certain rules, as well as accuracy.

Various types of materials for standard finishes

To decorate a doorway without a door, finishing products are used that have different technological features.

PVC panels

This option is one of the most popular. This is facilitated by the fact that such products have excellent characteristics, and are also very affordable. For laying, the method of landing on glue is often used. Panels are mainly faced with slopes. Other parts of the doorway are finished with other materials.

On a note! PVC products require careful selection. To make a coating that will look harmonious in the interior, preference should be given to varieties made as an imitation of natural materials.

Everything is done like this:

Requires to leave the structure for a while to avoid displacement of elements. Now proceed to the elimination of external joints. If they are closed with plastic corners, as is done when facing windows, then a not very attractive effect may turn out. Therefore, it is better to perform putty with putty. Then you can start the subsequent finishing. For this, painting, wallpapering is carried out.

Should know! Exist plastic architraves, which are well combined with PVC panels. But pruning them is a very laborious task. The fact is that it is necessary to adjust the elements at an angle of 90 degrees.

The best replacement for PVC will be MDF panels. Finishing openings with such material goes well with other products. If it is required to perform cladding of structures in this way, in order to exclude the formation of visible joints, lamination is used.

stucco work

It is immediately worth noting that stucco molding is currently used, which is made of polyurethane. Unlike gypsum options, this type of product is characterized by low weight. Its installation can be performed without the involvement of additional assistants. An important feature such a material is that it lends itself to post-processing. That is, it is easy to paint in different colors.

Finishing the opening is carried out according to a certain scheme:

• All parts and glue are preliminarily kept in the room where the installation will be carried out for 24 hours. This will ensure that all elements get used to the existing microclimate.
• The areas to be pasted over are carefully covered with a primer. Only compositions that have a deep penetrating effect are selected.
  

  Important! It should be remembered that the stucco sticker is done first. Only after that, it is possible to produce a general wall decoration.

• The surfaces of the products are slightly rubbed with sandpaper. Next, glue is applied. It is evenly distributed on the wrong side of the fragments. Now the stucco is applied to the selected area and pressed well. To prevent the elements from slipping, small self-tapping screws are screwed under them.
• If excess glue appears, then they are immediately removed. When this cannot be done immediately, then you can use acetone, which is moistened with a sponge.
• An important point is the docking of elements. It can be carried out at a right angle (perpendicular installation), or trimming is performed, which is done at an angle of 45 degrees.
• After cladding, joints appear. They are hidden with putty, which, after drying, is rubbed with sandpaper. Particular care should be taken when finishing between rooms, because it is required to provide for the location of parts on both sides.

Ennobling the doorway with stucco provides some nuances. This option is best suited for rooms that have fairly high ceilings. If applied to small rooms, then it is advisable to carefully consider the location of all elements. The fact is that it is easy enough to overload the room so that the interior becomes simply spoiled.

Fake diamond

The use of artificial stone is a great solution that helps to decorate a doorway without a door in a very stylish and modern way. This option is superior to similar products due to the fact that the material is produced in a large decorative range. For example, clinker tiles are also used for cladding such structures, but their choice is rather limited.

On a note! It should be borne in mind that the concept of "artificial" does not belittle the merits of this product. The simulation is carried out with excellent accuracy. The texture and shades of natural stones are repeated.

Before finishing decorative stone doorway without a door, you should familiarize yourself with its advantages. There are the following advantages of the material:

• Excellent appearance, which brings presentability to the interior.
• Possibility of combination with other finishing materials.
• Excellent mechanical resistance.
• Durability. Service life is calculated in decades.

For work, small-sized products are used, which have some relief. If you choose a deeper texture, it will look very cumbersome.

The cladding is done according to various technologies. Often laying is carried out in a way that allows you to form uneven edges.

On a note! Currently, special elements have been developed that act as corner plates. They help you avoid overcutting.

Making the opening is quite simple:

1. Marking is carried out on the selected areas. It should repeat the developed scheme. To carry out this process most accurately, the stone is laid out on the floor in a given order.
2. Wall surfaces are treated with primers that have deep penetration. This will improve adhesion. It is important to allow all areas to dry thoroughly.
3. Fixation can be carried out on a special adhesive for tiles or "liquid nails". The second option is suitable for those cases where the base has almost perfect evenness.
4. The composition is applied to the wrong side of the elements. It is important to remove any excess.
5. The stone is laid in ways that make it possible to form a seam or get by with a monolithic surface (without joints).
6. Details are seated in place and pressed. It is important to achieve a good grip.
7. If joints have been formed, then they are overwritten. The color of the mixture is selected contrasting or plain.

If the question arises: what is the best way to finish a doorway that does not have doors, the first thing to consider are options that include artificial stone, decorative brick and clinker.

Plaster

IN Lately such material has noticeably fallen in popularity. But just recently, about ten years ago, this method seemed the most accessible. It's safe to say that many simply underestimate plaster. Indeed, this option has several significant drawbacks - the complexity of application (in the absence of experience) and the presence of a certain amount of "dirt". But if you do all the work correctly, as well as achieve a combination with other products, then the effect will pleasantly surprise you.

How to decorate a doorway without a door by plastering:

1. being prepared required amount mixtures. The solution made should be in such quantity that it is enough for 30-45 minutes of work.
2. The mixture is applied to the surface by spraying. Leveling occurs using a rule or a wide spatula.
3. If required, beacons and perforated profile guides are installed.
4. When the solution layer exceeds 1-1.5 cm, then a reinforcing mesh is laid.

Such a surface can be painted. But it is better if the plaster acts as a starting composition. Then the finishing can be a decorative (textured) putty. It is applied in a certain order, which allows you to get amazing coverage. Such doorways will become an interior decoration.

Arch device

The arch can transform the interior. It is important to understand that a device of this design requires a certain amount of experience. Indeed, in order to finish the doorway exclusively with your own hands, you will need to expend a lot of effort.

Should know! There are standard-sized arches that are already completely ready for installation. They just need to be carefully installed.

The most simple are the arches made of drywall. It looks like this:

1. Finishing doorways begins with the installation of the frame on both sides. It is fixed on the upper horizontal and vertical racks. On the latter, it has a size that is almost equal to the end of the rounding.
2. GKL parts are fixed to the frame. An arc is pre-cut on them, for this a stencil is made.
3. Inside the resulting structure, an additional crate is performed. It serves to fasten the last arc-shaped drywall element.
4. The final finish is done with putty. Decorative cladding is made in various materials.

The arch can be done with more "noble" products, but will require more skill.

Other ways of registration

The design of doorways can be performed by other methods. They consist in using decorative curtains or screen. This method is very affordable and simple. In addition, it requires almost no work to be done.

Various options can be used:

1. Fabric curtains. They will be a great addition to any interior. The composition should be made in such a way that there is harmony with other elements and a combination with window decoration.
2. Bamboo curtains. This option is suitable when the room is made in eco style.
3. Thread curtains. These products are used if they want to fill the room with unusualness.

Of course, how to decorate the opening, everyone is chosen based on their taste and preferences.

Photo gallery: finishing options for doorways without doors (20 photos)

What can be done with an opening equipped with a door

Deciding how to make a doorway that has door leaf, involves the use of the most simple options. The only difference is where this structure is located.

A simple arrangement of interior space

Most affordable option finishing of interior openings is considered to be the installation of the box and adjacent elements. General technology is:

• The box is installed. It can be equipped with a threshold or be without it.
• As materials that will veneer the slopes, dobors are used. They are issued standard size(up to 120-150 mm).
• These elements are attached due to the groove that is on the box. If such design feature not provided, then the fixation is carried out on self-tapping screws. A hole for them is drilled through the end of the part.
• External decoration is made at the expense of platbands that frame the opening.

This option is great for situations where it is required to complete the cladding of not very wide structures.

Other options

How to ennoble a doorway that has a door in a more original way? In fact, to truly create interesting option, it is necessary to try. The fact is that it is the hinged canvas that limits the use of different materials. Improper use of finishing products - prevents opening. Although, given this feature, almost everything is suitable for exterior decoration.

On a note! There is a sliding way to open the door. That is, the canvases repeat the arrangement of compartment doors. This is a rather interesting technological solution that requires a more careful choice of facing products.

How to finish a doorway? Such a question has many answers, which depend on the specific situation. But no matter what anyone advises, you still need to listen to your heart and choose the option that will be closest to you.