Hanging chair. How to make a hanging chair with your own hands Do-it-yourself children's hanging chair

In an effort to comfortably arrange their living space, many people prefer non-standard design solutions. They are able to bring originality to a familiar interior and provide additional comfort. These items include hanging chairs that you can make yourself.

What kind of hanging chairs you can make yourself

Among the variety of hanging chairs, there are models that you can make yourself. Such options will become the highlight of your interior. In addition, self-production allows you to bring to life an individual plan, which is based on proven and reliable designs.

Hanging swing

Unusual swing chairs are made from various materials. The peculiarity of such structures is their elegance, simplicity and the ability to use both hard and soft frames. These chairs can become stylish decoration country house, an unusual addition to the interior of a bedroom, living room, children's room or veranda.

Wicker cocoon

No less popular is the cocoon chair or egg chair. A special feature of the model is the presence of walls that hide the internal space by about 2/3. These chairs allow you to enjoy privacy; they are most popular among children due to their resemblance to a hanging house suitable for games. Usually cocoons are made from natural materials, intended for weaving.

Nest chair made of hoop

As the most popular homemade model protrudes a nest chair made on the basis of a hoop frame. This model can be equipped with many decorative elements, and its shape fits harmoniously into the living space modern apartments. A variety of weaving techniques are used to make a nesting chair.

Materials and techniques for making home chairs

When choosing the materials needed to make hanging chairs, first of all take into account the features of the model you are interested in.

Thick textiles are suitable for swing chairs, synthetic ropes various types and wooden blocks.
A cocoon chair is made from rattan, willow twigs, bast, willow or bird cherry, which have the necessary flexibility.
To make a nest chair, you need plastic or steel hoops to ensure structural rigidity. You also cannot do without wear-resistant textiles, synthetic fillers, decorative cords for weaving and wooden blocks of different sizes.

To create the seats of hanging chairs, craftsmen use various techniques:

macrame. The artistic interweaving of rope and rope knots gives the chairs airiness, ensuring impeccable appearance;
patchwork. To ensure the strength of the seat, the patchwork fabric is sewn on top of a dense wear-resistant material;
knitting. The combination of durable cords of various colors allows you to implement unusual design solutions;
Tatting. Thanks to their openwork, these designs look weightless, instantly attracting attention.

Remember that the materials chosen must be able to withstand certain weight loads. Fabric that is too thin or lace can tear under the weight of a large person. The fastening elements also deserve special attention and strength testing: chains, ropes, braid on which the structure is suspended.

DIY hanging chairs - gallery

Hanging chair- fabric swing - a convenient addition to a country house Cocoon chair from thick fabric kids will like it Rattan hanging cocoon chair is strong and durable A hanging nest chair made of thick fabric is suitable for relaxing on summer cottage A simple model of a swing chair is easy to make with your own hands An original handmade hanging chair will become a source of pride for its owners. A hanging swing chair woven using macrame technique adds coziness and comfort. An openwork seat for a hanging chair can be woven from thick cord Hanging chairs can be used as a cradle for a baby

Step-by-step instructions for making a hanging swing chair

The swing chair can rightfully be called one of the most simple models that you can do yourself. To create it you will need:

2 meters of dense fabric (canvas, satin, trouser fabric);
a wooden stick about 1 m long and 5–6 cm in diameter;
drill and twist drill(15–20 mm);
carbines (11 cm) with a load capacity of 160 kg;
rope for static belay with a thickness of 10–11.5 mm with a breaking load from 2600 to 3200 kgf;
sewing machine, scissors, ruler.
paint, brushes, iron and durable synthetic fiber threads.

Having prepared everything you need, you can start making an unusual interior detail.

Fold the selected fabric in half, then count 18 cm from the top corner.
Carefully cut off the resulting triangle (photo 1).
Hem all sides of the fabric cut, bending the edges by 1.5 cm (photo 2).
Create pockets for the ropes (Photo 3). On the long side of the workpiece, fold the edges 4 cm and sew them up using a sewing machine (photos 4 and 5).
Make two holes on both sides of the wooden stick at a distance of 5 cm from each other, and the distance between pairs of these holes should be about 80 cm (photo 6).
Thread a rope into the holes located closer to the center of the stick and secure it with knots. At the same time, in the center of the cable, also tie a knot necessary for attaching the carabiner.
Pass the sections of cable hanging under the stick through the fabric blank, and insert its ends into the free holes located closer to the edges of the stick. Secure them with a secure knot (photo 8).
Attach two carabiners connected to each other to a hook pre-fixed to the ceiling. This will ensure you can rock safely in the chair. Thread the cable into the lower carabiner.

The resulting hanging swing chair can be additionally equipped with soft pillows, providing comfort.

How to make a hanging hammock yourself from a hoop and fabric - video

Drawings and diagrams for a cocoon-shaped structure

To make an original model of a hanging chair you will need:

rattan or willow rods with a diameter of 10 or 15 mm, approximately 450 pcs.;
a ready-made metal hoop, metal pipes or several thick vine branches woven together in the form of a circle;
strong rope and glue, which will be needed for tying the frame;
knife, ruler, pruning shears and awl;
nylon cord with a cross-section of 4 mm, used for weaving the back (it can also be made from wicker);
ropes, chains or cords for hanging the finished structure from the ceiling.

Beginners will need a ready-made cocoon diagram, which allows them to correctly calculate the dimensions of the future chair.

When manufacturing, follow the instructions.

Cut the vine, peel the bark and steam it, then beat it thoroughly. These manipulations will provide her with the flexibility necessary for weaving.
Then proceed to forming the frame of the future chair. It can be made from metal pipes or a slightly flattened hoop, if the final shape of the product should be oval. If using a pipe, connect its ends using inserts.
To the pipe, which acts as a frame base, attach all the remaining elements one by one. If the chair is mounted vertically, use rods 6–8 mm thick, the length of which should exceed the height of the chair by 250–400 mm.
Attach each of the rods to the upper parts of the frame so that a gradual separation is maintained between them. In the middle of the back the distance should be 20 - 25 mm.
By bending the rods, give the future chair depth and shape. Make sure that they are reassembled at the bottom of the structure.
When using horizontal rods in the process of creating a frame, secure them to the sides of the workpiece. Install them at a distance of 20–25 mm from each other, then give them the desired shape.
To secure the vine, carefully bend it through the pipe in the direction from inside outdoor chairs. Secure the ends with a rope.
Weave the finished structure with thinner rods, moving from bottom to top.
If you need to braid the frame from horizontally fixed rods, start work from the middle of the back in both directions. Bend the end of the rod that is on the pipe and twist it around the base.
Press each new layer of thin twigs as hard as possible against the previous one.
Braid the entire basket. Bend the end of the last rod, tuck it in and securely fasten it in the main weave.

To give additional comfort to the seat of such a chair, you can use a thick pillow.

You can braid the frame different ways. Suitable for beginners simple techniques, providing a firm seating base.

Simple twig weaving techniques - gallery

Even beginners can cope with such weaving Various weaving patterns can be used to make hanging rocking chairs Using twig weaving you can create a dense base for a chair

How to make a nesting chair with a knitted bottom

To create a nest chair that will become an exquisite decoration for your apartment or garden, you need to prepare the following materials:

metal hoop with a diameter of 90 to 110 cm, a cross-section of at least 35 mm;
700–800 m of polyester cord with a diameter of 4.5–5 mm;
crochet hook No. 8–9;
slings - 12 meters;
roulette;
scissors.

Wrap the hoop used as a base with strong twine, securing every tenth turn with a knot; this will prevent the cord from unraveling.

To create the bottom, you can use a variety of crochet techniques. To make such a seat you will need from 120 to 160 m of cord. The exact quantity depends on the knitting pattern chosen.

Start working from the center. Knit the circle as tightly as possible using single crochets and chain stitches.
Start forming the seat with 6–7 circles, after which move on to the back in the form of a knitted mesh.
Stretch the finished napkin onto the hoop, spreading it evenly over the entire base. The resulting structure should not sag. Attach to the hoop from the side of tight knitting, without cutting the cord.
Attach slings to the finished product.

Making a seat using the macrame technique

For this version of a hanging chair you will need:

7 threads of 6 m;
4 threads of 5 m;
4 threads 4.5 m each;
2 threads of 4 m;
2 metal hoops with a diameter of 90 and 110 cm.

Having prepared the cords of the required length, proceed to attach them to the hoop.

Starting from the center, fasten 7 long threads in pairs at a distance of 6 cm from each other.
Continue fastening the threads along the sides of the warp. As a result, on one side there should be 2 threads of 5 m each, 2 threads of 4.5 m each and 1 thread whose length is 4 m.
Then start weaving the pattern from the center of the workpiece.
As a result of your work, you should get an openwork circle.
To prevent the cable from moving in a circle, secure each thread with a flat knot.
When knitting, maintain tension at all times, placing knots at 6 cm intervals.

If it is necessary to create a fringe, the length of the threads should be increased by about a meter and, at the end of the work, do not cut the remaining cord.

Additionally, equip the resulting structure with reliable slings and a soft cushion.

Hanging hammock chair using macrame technique - video

Hanging mounting options

Attaching a hanging chair can be done in different ways. One option is a ceiling hook mount. The finished product, hung in this way, can swing in different directions, but moving it to another part of the room is very problematic.

This method can only be used if there is high-quality concrete floor or with coffered ceilings, allowing fastening directly to the beams.

No less popular is mounting to a stand, which can be purchased in specialized stores. This design is equipped with circular platforms that provide stability. The chair on the stand can be easily moved around the apartment and even taken outside.

Another option is axial fastening, which allows you to fix the structure between the ceiling and the floor. This method is suitable for decorating children's rooms.

If the ceiling in your home is not reliable enough and is hollow, you can install a hanging chair using a chemical anchor. This method involves injecting a polymer paste into the ceiling cavity from a syringe, after which the product is installed.

Simple options for making a hanging chair at home are available even to novice craftsmen. Unusual designs decorate the interior, give the room originality and comfort. Good luck with your work and have fun creating!

Making a hanging chair with your own hands is a feasible task, the main thing is to choose a convenient manufacturing technique. As a child, everyone loved swings. The gentle rocking is so calming. And it is not surprising that as adults everyone wants to return to these moments of calm and tranquility. A hammock stretched between two old trees at the dacha and a wicker hanging chair gently swinging on the veranda of the dacha - such a swing will win the love of any adult and, of course, children.

Making a hanging chair with your own hands is a feasible task

To make a hanging chair, absolutely different materials. It all depends on what the frame will be like. Today the following designs are relevant:

Rigid frame. Traditionally, structures are made from rattan or wicker rods. In a modern interpretation, you can find metal, plastic and acrylic frames. The rigid frame is covered with dense fabrics or braided with vines. Acrylic chairs are spherical in shape.
Soft frame. Fabrics are traditionally used for such chairs, and their closest relative is the hammock.
Cocoon shape. A cocoon, or egg chair, made on a rigid frame with wickerwork, will appeal to those who like to be alone with themselves. The walls are wide and will cover the seated person, and the interior space is hidden deep down. A separate world is created for those sitting in such a cocoon. In such a hanging cocoon you can hide from the outside world and enjoy your vacation.
Drop shape. This shape is good when you need a children's hanging chair. Usually this is a chair in the form small house or cradles. You can sleep soundly in it or play hide and seek.

To make a hanging chair, completely different materials are used.

When choosing a frame, you should pay attention Special attention to the place where the structure will hang, the type of fastening and for whom exactly it is intended depends on this. If there are small children in the house, then the hanging element of the interior should be as durable and reliable as possible. For options used in open spaces, for example, in a country house, mobility is important so that, if necessary, the structure can be quickly removed and it does not get wet in the rain.

Hammock chair made of metal hoop (video)

A simple hoop device

One of the easiest options for making a chair with your own hands is a chair with a hoop base. The frame here was an ordinary hula hoop. If such sports equipment is sitting idle in the house, you can give it a second life. Of course, a plastic hoop is not suitable here due to its fragility, but a metal hula hoop will do. There are two ways to make a chair: with one hoop and two, different in diameter.

It is not difficult to make a hanging chair on one hoop; the necessary materials are:

metal hoop, diameter from 0.8 to 1.2 m (the size of the chair depends on the diameter);
pieces of fabric (2 pieces) measuring 1.2x1.2 or 1.6x1.6 m (the fabric must be durable, you can use lining materials with padding polyester, they usually have factory stitching);
a piece of the same fabric, width 0.2 m, length 3.5-4 m (you can take several pieces);
padding polyester, width 2 m, length 3.5-4 m;
zipper, length 0.8-1.2 m;
linen rope or strong cord, length 10-11 m.

How to make a hanging chair - you must follow the instructions:

Step 1. The fabric is spread out on a flat surface. A hoop is placed in the center of the fabric. A circle is drawn on the fabric with 25 cm indentations from the hoop. A circle is cut out according to the markings. There will be 2 parts. If the chair has synthetic padding, then a circle is cut out of it using the same markings.
Step 2. One of the fabric pieces is folded in half. Using scissors, cut the circle in the center - this is the place for the zipper. A zipper is attached along the cut line. Now fold 2 circles with the right side inward and sew them together. The cover must be turned right side out.
Step 3. To secure the cables, 4 holes are cut. To prevent the holes from looking sloppy, they can be covered with braid.
Step 4. To make your stay in the chair comfortable, the hoop should be covered with padding polyester. This must be done with a hand seam, a stitch across the edges, and to prevent the fabric from slipping, in some places you can glue it with polymer glue. The hoop, lined with padding polyester, is threaded through a sewn-in zipper into the finished case.
Step 5. All that remains is to secure the cables. Sections are cut from linen ropes or cord (2 sections of 2.2 m each and 2 sections of 2.8 meters each). Each piece is folded in half and strong knots are tied at the ends. Each rope is threaded through a hole and secured with a loop.
Step 6. All that remains is to hang the chair.

Gallery: hanging chair (25 photos)

Design on two hoops

More often, chairs are made using the macrame weaving technique, like a regular hammock, but not everyone has this skill, and therefore you can make a chair in another way, more common and simpler.

List for making such a chair necessary materials will change:

2 metal hoops of different diameters - 0.7 and 1.1 m;
nylon cord 1 m long, thickness not less than 4 mm (can be replaced with linen or jute rope);
nylon cord for cables: length – 12 m, thickness – 7 mm;
metal pipes: diameter -25 mm, 2 pieces (can be replaced with a rope with a diameter of 12 mm).

Instructions:

Step 1. First, 2 hoops are wrapped with nylon cord. To prevent the loops from creeping, the weaving should be tightened every 20 turns. To secure the cord more securely, you can use polymer glue, but so that it is not visible on the hoop. The cord is laid in a very tight knit. Otherwise, the product will look sloppy.
Step 2. The lower hoop is braided with a cord or rope. You can use any macrame technique as a basis, for example, checkerboard weaving. But if macrame is not possible, then circular weaving, as for rugs, will be the way out. This weaving is simple to make and durable when used.
Step 3. Next you need to weave 2 hoops together. This is done from below, in front of the chair. Then the back needs to be stiffened. 2 metal pipes, braided with cord or rope, are fixed in the back of the chair. The tubes are braided or sewn to the lower and upper hoops, parallel to each other.
Step 4. Now you can braid the back of the chair. The cables are fixed to the upper hoop. They can also be braided with cord or rope for strength.

Wicker cocoon made of willow

In the middle of the last century, a hanging wicker chair or wicker chair was considered chic and fashionable. Today, furniture made from natural materials is not losing its position. For production they use willow twigs, willow trees, rattan and bast are perfect. Russian manufacturers Willow and willow are most often used.

You can make a wicker children's hanging cocoon chair (hanging because it is in a suspended state) with your own hands. The art of weaving requires considerable effort and patience. The weaving pattern depends on the skills of the craftsman. Rattan is perfect for beginners, as it is more flexible and manageable.

Materials required for work:

willow twigs - 500 pieces with a diameter of 1-2 mm;
the front part should be framed from a metal hoop or pipe (braided rods can be used);
strong twine for wrapping;
glue;
nylon cord with a diameter of 4 mm, natural color;
cables for fastening the finished product.

You should start by preparing the vines. To make it pliable for weaving, it should be steamed and cleared of bark. The peeled vine is beaten back.

If the frame of the chair is made of hoop, then to give it the shape of a cocoon it needs to be bent so that it becomes an oval or egg shape.

Advice! The cocoon or egg chair shape comes out better from a metal-plastic tube. It can be easily given any shape.

Instructions:

Step 1. First prepare the cross. 3 or 4 rods are tied together with twine in the shape of a cross. The twine is coated with glue. The length of the rods is selected based on the diameter of the future seat.
Step 2. The crosspiece is wrapped around a thin rod. It should alternately be on top or below the crossbar rods.
Step 3. Rod by rod, a circle for sitting with a diameter of 70-90 cm is wrapped in the same way. The last rod in the weaving is tied with twine and coated with glue.
Step 4. Now you can weave the basket. Weaving a cocoon chair is the same as weaving a basket, with the only difference being the weaving of the seat. The first step is to install the frame rods. They are attached to the main frame and woven seat using twine coated with glue. The frame rods are fixed at intervals of 2-2.5 cm. They form the back and depth of the future chair.
Step 5. The main rods are threaded perpendicular to the frame rods. Weaving starts from the bottom. Rising up, the body of the chair is created. Weaving is carried out horizontally in relation to the main frame and begins from the middle of the back of the chair. The ends of the rods are braided around the front part of the frame made of a hoop or tube. The rods are pressed tightly one to one. The ends of the last rod are pushed with an awl into the main weave of the chair.
Step 6. Cables for hanging are installed in the finished cocoon.

Important! The wicker cocoon chair and egg chair do not have reliable back support, so it is good to use high, dense pillows.

How to make a hammock at home (video)

Lightweight hammock for the cottage

Everyone probably knows what a hammock is - a rectangular piece of fabric with wooden bars on the sides and cables for installation.

Materials:

a piece of thick fabric, the width and length are determined as desired (a long length, more than 2 meters, will make the structure uncomfortable, the back will always fall through);
synthetic winterizer or any other filler;
wooden or metal strips for side fastenings (strong nylon ropes can be used);
ropes or cables for a hanging chair.

Manufacturing process:

Step 1. A piece of fabric is folded in half. One edge should remain uneven so that there is a curl. A padding polyester or other filler is laid. The cut is stitched along the edges. On both sides you need to leave 2 large cavities along the diameter of the fastenings (planks or ropes).
Step 2. Fasteners are threaded into the resulting cavities. To keep the ropes stationary, they can be sewn on a machine or sewn by hand.
Step 3. Holes are made in the side strips for attaching ropes or cables, they are threaded and secured with a strong knot or loop. You can coat them with glue. Side fastenings are attached to one hinged bar
Step 4. The structure is attached to the ceiling.

In appearance, such a structure with parallel fastening resembles a small hanging hammock. In order to strengthen the back, you can use a thick pillow.

In conclusion, it is worth noting that safety precautions must always be observed.

Attention, TODAY only!

You still don’t know how to make a hanging hammock chair for your home or cottage? Such a resting place can be made from threads, planks, fabric and a gymnastics hoop.

How to make a hanging chair with your own hands from fabric?

Such relaxation swings can be made from various materials, from:

fabrics;
threads;
planks;
vines;
plastic;
rattan

A chair with a rigid frame is made of acrylic, plastic, wicker, metal, rattan.

The second type of these swings for relaxation is a cocoon chair, it is wicker and has a rigid frame.

A chair with a soft base is similar to a hammock, but differs in that the hammock needs to be hung on two sides, while this chair only needs to be hung on one.

There are several methods that can be adopted to make this recreational item at home. The basis of such chairs is a regular hula hoop.

To do this, use:

gymnastic metal hoop, diameter 93 cm;
padding polyester;
dense linen fabric, for example, jeans - 3 m with a width of 150 cm;
cotton fabric - 40 cm;
belt tape - 8 m;
trouser braid - 3 m;
four metal buckles;
reliable metal ring.

Fold the fabric in half, cut it into two squares with sides of 150 cm. From each, cut out a circle with a radius of 65 cm.

To make even blanks, fold the squares of fabric in half twice, draw a quarter circle, and cut out.

On one side of one of the circles, draw a rectangle, as in the diagram. Make a cut in the center of this figure, not reaching the end of the rectangle, cut to the right and left at an angle of 45°. This is where the straps will be attached.

Make exactly the same slot on the second circle. To reinforce these areas, stitch here with trouser tape.

Notch the edges of both sheets, cutting out in the form of cloves.

Cut the padding polyester into strips, place them along the edge of the round parts, and later the hoop will be located here. Fold fabric circles wrong side to each other, inserting strips of padding polyester inside along the edge. Sew, retreating from the outer circle to the inner one 6 cm.

Insert the hoop, fold the edges of the fabric, and stitch them outside. Cut the belt tape into strips 2 meters long.

To prevent the ends of the belt from fraying and unraveling, they must be melted over a flame.

Place buckles on these blanks and use them to adjust the angle of inclination and height of the product.

As a result, you will get a comfortable hanging chair, which can be created from available materials. The second option also involves the use of fabric.

To make these hanging swing, take:

nylon threads;
carbine;
hook;
dense fabric.

To make this tutorial easier to understand, keep in mind that one inch is 2.54 cm. Therefore, to make a comfortable hanging chair from the ceiling or from a tree, cut the fabric measuring 115 by 86 cm.

From the same fabric you need to cut strips measuring 7.5x15 cm, you will need 14 pieces. Fold each in half and stitch along the edge on the wrong side to create a ribbon measuring 15 x 3.8 cm.

Now fold these blanks in half lengthwise, firmly stitch the ends with a cross and along the perimeter. You have a folded loop of 7.5 x 3.8 cm.

Now you need to sew 7 such parts on one side and the same number on the other side of the main fabric.

Through each such loop, pass a neon rope folded in half. Tie to secure these threads.

Fold the edge of the fabric twice, insert loops here, sew, making three parallel seams to secure the workpieces well.

Look at how the ropes need to be secured to securely fasten them.

Tie the upper edges of the ribbons with knots onto a strong wooden stick. Secure the structure with a carabiner, then hang it on a reliable ceiling mount.

A hanging hammock chair will be very comfortable to use when you sew two pillows for it - for the seat and the back.

You can do it quickly. To do this, you also cut out a rectangle from thick fabric; you need to tuck it on the right and left sides in order to thread it into the resulting drawstring strong rope.

It will be enough to put a low pillow here, and the place to rest is ready. It is best to hang such fabric chairs using a wooden plank. You need to drill 4 holes in it along the edges, insert the edges of the ropes and the central thread here. All this is fixed with strong knots.

Chains can be used instead of ropes. To do this, holes are made along the edges of the hammock chair, where metal rings are attached. Using carabiners, the chain is fixed in these holes and at the top.

There are designs made from other materials, check them out.

Hanging hammock chair made of wood

It’s nice to relax on such a chair in the countryside in the fresh air. It can be made from Euro pallets, thereby solving the problem of their disposal and getting the right thing almost for free.

To make such a hanging hammock, take:

boards measuring 600 by 120 mm or 700 by 150 mm (the thickness of these boards is 10–15 mm);
varnish or stain;
10 meters of nylon paracord cord;
drill and bit;
sandpaper;
jigsaw or hacksaw.

If you are making a chair from a pallet, then carefully disassemble it, now remove the nails. Where there are holes left from them, these edges need to be sawed off evenly.

Sand each board to ensure there are no splinters left on the surface. Treat these blanks with stain or varnish intended for outdoor use.

Drill holes at the edges of each board at a distance of 5 cm, place the two pieces side by side, weave the cord first diagonally in one direction, then in the other to connect the boards.

In the same way, tying the laces crosswise, connect the other elements of the hammock.

The ropes do not need to be tightened too tightly so as not to deform the structure. The hammock elements should not overlap each other.

Drill holes in the top board and the second one from the bottom. This is where you will thread a strong rope to hang the hammock from a frame made of four planks. That, in turn, needs to be attached to a rope that is attached to a tree or, for example, to the ceiling of the veranda.

You can make a similar hanging hammock chair from wood in another way.

To make such a swing, take:

wooden planks of suitable size, 1.5–2 cm thick;
self-tapping screws with wide heads;
durable nylon cord.

Lay the boards on a flat surface at a distance of 1 cm from each other. Tie them on one side with a snake cord in one direction, then in the opposite direction.

On the wrong side, connect both ends of this cord and secure them with a self-tapping screw. Braid the boards on the other side in the same way.

Attach a cord to each plank on the reverse side using a self-tapping screw. Tie a rope from the bottom and top of the chair on one side and the other, align the slings, and hang your product. We need to dwell on this issue in more detail, since the hanging chair must be securely attached to the ceiling.

Methods for attaching a hanging hammock chair

If you want to hang a chair at home, you need to choose fasteners based on your specific ceiling. If you have a holistic concrete ceiling without voids, then to implement your plan you will need:

powerful anchor;
metal chain;
hook;
drill or hammer drill;
drill for concrete.

Mark where you will make the hole, drill it using the appropriate tools. Attach the anchor here, hang a hook and a chain on it, the second edge of which is attached to the hanging chair.

You can buy such parts individually or a set, which is a kit designed for attaching hanging devices.

If there are voids in the ceiling slab, then you must first make holes in it, then fill it with a special compound called a chemical anchor.

A metal anchor is inserted into the filled hole in the desired position. It is necessary to leave it for 2-3 days so that the soft composition completely hardens, only then can you hang the hammock chair.

If the ceiling is reinforced with strong floor beams, it will hold up well special mount for hanging chairs. As you can see, it is fixed with bolts.

For suspended ceilings The following design is suitable. The upper part is mounted on a solid concrete ceiling, then it passes through the suspended ceiling. A hook or ring with a decorative cuff is screwed into this, and a hanging hammock chair is attached to the device.

Reliable slings can be made from linen or jute rope. You can perfectly secure several ropes using macrame.

This uses a double flat knot. It is created by alternating weaving a left and right flat knot.

How to weave a hanging hammock chair with your own hands?

This is one of the simple options. For such a hanging chair, take:

four wooden or plastic strips;
rope rope;
drill;
threads

There should be two strips larger diameter, drill holes in them along the edges with a drill. Insert two slightly thinner planks here perpendicularly and secure them with fasteners. You can use a metal rod with a thread and screw washers here.

On top bar dial required amount threads, bending each in half. Create a canvas using . Here a “checkerboard” pattern of flat knots was used. If it’s still difficult for you to master macrame, then sew a rectangle from reliable fabric, tuck its edges at the top and bottom, stitch with a margin to insert reliable strips here.

If you want to weave a hanging chair using macrame, then at the end of the work, tie the threads to the bar, tie them with knots, cut them, leaving the fringe.

All that remains is to thread the rope slings through the holes made in the transverse slats, after which you can hang the hammock from the ceiling or from a tree.

The second option is more complex, but no less interesting in execution.

Before weaving a hammock, you need to prepare:

large gymnastic hoop made of steel;
two small gymnastic rings with a diameter of 17 cm;
polyester cord with a diameter of 0.5 cm;
hook;
scissors.

To make a seat, use a hook to crochet a large openwork napkin of a suitable diameter. To do this, first cast on 10 air loops and connect them into a ring.

Complete the first row according to the pattern: double crochet, chain 1, then in the same way.
The second row consists of a double crochet and two chain stitches, also knit to the end of this row.
In the third row you need to alternate double crochet and 5 chain stitches.
In the next rows, add two air loops in each.

In the last row you will need to braid a hoop to create a seat for the hammock chair. If you don’t want or don’t know how to crochet, then you can make it using this braid.

To do this, you need to act in a similar way when darning items. First, tie the threads to the hoop horizontally parallel to each other, then vertically, passing them between the ones you just created in a checkerboard pattern.

If you are interested in the macrame technique, using simple knots you will make a woven mesh for the seat.

To create this you will need:

2 threads 400 cm long;
4 threads of 450 cm;
4 pieces of threads 550 cm each;
8 threads of 600 cm.

Tie 8 threads to the top of the hoop in pairs of two, leaving a distance of 6 cm between them.

Now make two flat corners on each to secure these elements.

Tie the remaining threads on the right and left sides of these central blanks. First, to the left and to the right of them are two, each having a length of 550 cm; then 2 x 450 cm; after that, one at a time, 400 cm long.

Starting from the center, weave a checkerboard pattern, leaving equal distance between the knots. In this way, fill the entire gymnastic hoop.

See how you need to pull the threads at a 45 degree angle to get a similar effect.

Now you can make a suspension for the chair. It will be delicate and beautiful, but creating something like this requires patience.

First of all, cut 20 ropes, each 10 m long. Tie them in the center with a knot to mark the middle. Make 12 flat knots on these blanks.

Turn the work over reverse side, make 15 more flat knots. This part will be the loop.

For the convenience of weaving a hammock chair, move this piece upstairs, hanging it on a carabiner or on a belt.

Make a loop from this ribbon by making 4 flat knots.

You need to weave a so-called bell. To do this, turn the work sideways towards you, make a row of flat knots, stepping back 4 cm from the last row of weaving.

The first row of this bell will consist of 10 knots. To create a second one, you need to retreat another 4 cm from this first one. Make 10 knots in a checkerboard pattern relative to this one. Before making the third, step back a little lower by 5 cm.

Now you need to braid a small gymnastic leather hoop with threads.

Tie 4 threads in the center of the hoop, and 2 along its edges.

Attach the hoop with threads and begin weaving the back. To make it gradually expand, start tying the side threads; you will need about 20 pieces.

Continue creating the backrest for the hammock chair. You can use the pattern provided or your own weaving.

Along the edge of the design, make two rows of flat knots or one row of rep knots. When the back is completed, tie it to the hoop first in the middle, and then, pulling evenly, attach the side threads.

This is a wonderful hammock chair or something similar you can make.

Rest plays important role in the life of every person, since relaxation allows you to restore strength and take your mind off the difficult everyday life. For this purpose, in the modern world there are many devices, one of which is a hanging chair. Surely you can buy it at furniture store, but it is much better to do this work yourself, which will save the family budget. The finished product can be hung both in a city apartment and in a country house. It is very convenient to read books, have a conversation or drink tea in the garden. To make it, you don’t need to put in a lot of effort and time. How to make a hanging chair yourself from scrap materials will be discussed in this article.

Features and Disadvantages

A chair, like any interior item, has its positive and negative characteristics. Let's look at them. The advantages include:

originality (adding to the interior);
exclusivity (if you make it yourself, you can get a one-of-a-kind copy of a hanging chair);
comfort (the main advantage that will allow you to enjoy comfort at any moment).

The list of disadvantages is smaller, but it is important to take them into account to avoid mistakes:

a reliable fastening system, thought out in advance, is required;
cannot be mounted on a suspended or suspended ceiling.

To solve the problem with fastening, it is important to decide on the model of the chair itself, since today there are a large number of them.

Note! If, when designing a chair, it is intended to be used in several rooms, then it is worthwhile to immediately provide for several fastening systems. This will allow you to easily and effortlessly transfer it at the right time.

Main classification

There are the following types of hanging chairs:

Fabric frame. The design and appearance resemble a hammock, the ends of which are secured not at the sides, but at the top. Another difference is the size. The convenience of this form lies in the fact that the material accepts the shape of the human body.
Cocoon chair. The convenient and almost closed design allows you to hide from the outside world and be alone with your thoughts.
Hanging chair. A practical model for children and teenagers, shaped like a drop. For safety, some designs have doors that will prevent the child from falling out.
Chair with stand. This model does not need to be fixed to the ceiling, since the entire load is taken on by a special stable leg-stand.
With a frame made of rattan, wicker, plastic or acrylic. The base material is used to make the chair frame, which is then covered with fabric.
Glass chair. Popular model modern interior. If necessary, it can be moved throughout the house.
Swing chair. A common design for placement in a garden or recreation area on the site of a country cottage.

In addition, there is another classification that divides all hanging chairs according to several criteria:

material for manufacturing;
method of fastening (axial and rod);
maximum load (depending on the quality and strength of the materials used);
shape (bubble, cone, bag and closed type structures).

Note! Most hanging chairs are designed for a load of up to 100 kg, these include plastic, fabric and rattan models. For loads up to 200 kg, it is necessary to choose acrylic options.

As already mentioned, most chair models can be made at home from existing materials and a standard set of tools. So, the easiest to manufacture is the model with a cover. To do this, you need to prepare the following materials:

aluminum hoop with a diameter of 90 cm;
durable fabric 1.5 m wide - 3 m;
filler;
non-woven fabric or trouser tape;
metal buckles – 4 pcs;
slings – 8 m;
a metal ring of small diameter, but strong enough (for hanging a chair).

The only tools you will need are a sewing machine and all the tailor's supplies (measuring tape, chalk, scissors, pins, thread, etc.).

The first step is to make a cover. To do this, a 3-meter fabric is cut into two identical squares measuring 1.5 × 1.5 m. To cut a circle correct form, each piece of dense material is folded 4 times, a circle with a radius of 65 cm is outlined, plus the internal contour is outlined with a dotted line, retreating 4 cm. Cut it out. You also need to make markings for the slings: guidelines can be obtained by ironing the folded material with a hot iron. So, the first pair of lines will be located at 45° relative to the bend, and the second at 30°. After all the markings are ready, you can lay out the fabric, cut out circles and smooth it out well.

Next, we make 15x10 cm slits along the contour of the Y-shaped markings, which turned out inside the rectangles. To ensure that the cuts are the same, we fold both pieces of fabric one on top of the other and pin them together. Using non-woven fabric and an iron, we glue the edges, first bending the petals of the slots.

Sew the circles along the dotted line, leaving a small hole to turn the cover inside out and insert the hoop. The filler is cut into strips and the frame (hoop) is covered with them so that it does not press. We also fill the case with an even layer of padding polyester, not forgetting to secure the edges with a hidden seam. To strengthen the material on the frame, it is worth quilting in several places. The length of the sling depends on the height of the ceilings, but on average it is 2 m. It is necessary to cut 4 pieces, which are fixed through the prepared slots. The upper ends are secured to a ring, which will be suspended on a mounting system from the ceiling.

Note! You can use a metal hula hoop as a hoop or make it yourself from a metal-plastic pipe.

For video instructions on how to make such a hammock, see below:

Features of sewing a hammock chair

If you want to sew a hanging structure yourself, but at the same time spend a minimum of time and effort, then the hammock chair will become the best option and a way out of the situation. To make it, you need to prepare the following materials and tools:

a piece of dense fabric measuring 2x1.2 m (the load that the chair can withstand depends on the density of the fabric);
nylon rope;
block or plank of wood;
steel carabiner;
centimeter and chalk;
scissors;
sewing machine;
iron.

The sewing technology is quite simple and does not require special knowledge and skills:

The fabric is folded in half and 40 cm is removed from the top of the free edges. From this point, draw a line to the lower right corner and cut according to the markings. When expanded, a trapezoidal segment is obtained. Thanks to this action, the result is not an ordinary hammock, but a chair.
The bottom and top edges are folded twice and ironed well with a hot iron to secure. For reliability, they are stitched on a sewing machine.
The side edges also need to be folded 2 times at an angle of 90°. The rope should pass freely into the resulting cavity. The seams are sewn.
IN wooden block 2 holes are drilled at both ends, the diameter of which should be slightly larger than the thickness of the nylon rope. The holes must be located at a distance of 2 cm from the edges, and the same number of centimeters should be between the holes. The prepared block is opened with any paint and varnish material.
For reliability, the ends of the rope are burned to prevent unraveling. A strong knot is tied on one side, then passed through the first hole in the bar, then pulled through the side edge of the material and fixed on the second hole. The same actions are repeated on the other side.
A carabiner is attached to the block and the chair is hung from a hook in the ceiling or to a tree branch in the garden.

A wicker chair will look no less original in a similar design.

Note! When choosing a material for sewing a hammock, you need to combine it with the interior of the room. Thanks to this, the design will easily fit into the interior and complement it.

Hanging chairs made of durable materials

In addition to fabric and ropes that can be used as the basis for chairs, there are other options:

plastic;
plexiglass;
metal.

Most often they are used to create models such as an egg or ball hanging chair. It is very difficult to make them yourself, since they require special knowledge, skills and tools that not every owner has. Therefore, professionals advise purchasing them in specialized stores or ordering them from individual design workshops.

Some models can be suspended from the ceiling, but the best option there will be a special metal stand. Such models will have more advantages:

it becomes possible to carry them, which indicates mobility;
If desired, the chair can be detached from the stand and suspended from the ceiling or a tree.

Note! Keep in mind that not all options are suitable for placing a hanging chair outdoors, so it is better to give preference to those that are not afraid of moisture.

A few words about fastening systems

To make a hanging chair, it is important not only to choose durable materials, but also to create a reliable fastening. It must be designed not only for the weight of the structure, which can be made of heavy materials (for example, a ball chair is made of dense plastic with a durable frame), but also the weight of the person who will sit on it.

Another criterion that is taken into account when developing fasteners is the maximum load on the ceiling. It is calculated in kg/m2. If the weight is large, the entire load will have to be distributed across the ceiling, for which a power frame is built, which is connected with anchor bolts.

Note! During play, children will swing and jump on the chair, which increases the load, so this option should be considered.

In principle, this is only a small part of what can be said about the designs and features of hanging chairs. We have considered the manufacture of the simplest options. You can add something different to each of them, for example, decor or tulle to protect against annoying insects.

DIY hanging chairs are a guarantee of an individual and stylish design. Hanging or hanging chairs can have different sizes and shape. The designs also differ in the type of materials used for manufacturing.

Characteristics of types of hanging chairs

Currently, you can purchase a ready-made metal chair or a product made of rattan and fabric, but it is absolutely not difficult to make such a design yourself, Having studied the drawings and become familiar with the main types:

wicker chair suspended from the ceiling;
“bubble” model in the form of a ball;
hanging hammock chair;
frameless hanging models made exclusively from dense and reliable fabrics;
openwork hanging cocoon chair or egg chair.

Hanging models are suspended from ceiling structures or mounted on wooden beams. However, in last years A rocking chair mounted on a special metal stand came into fashion. If necessary, the model can easily replace a regular chair in the interior. This frame is fixed to the floor, so the design has whole line benefits presented by:

mobility. Can be moved or installed as desired anywhere in the room, as well as on outdoors;
the ability to detach from the stand and hang from the ceiling.

Wicker models made of wicker or rattan, as well as those created on the basis of transparent acrylic or plastic, have a fairly rigid body, so ease of use is most often complemented by decorative pillows of different sizes or soft small mattresses. A hammock chair is a softer option suspended structure, due to which it belongs to the most popular category. A “cocoon” model or a round wicker product, closed on three sides with woven walls, is ideal for moments of solitude and abstraction from the outside bustle. You can get a lighter, more flexible and quieter structure by replacing traditional rattan or wicker with modern, reliable, durable synthetic materials.

How to make a hanging hammock chair with your own hands

A correctly selected option fits organically into both the interior of the living space and the landscape local area.Most simple option is to use a hoop to create fabric, rather than a wicker model.

Small home models are designed for indoor use, so they can be made from materials that are not unstable to frost, rain and temperature changes. Garden or outdoor structures can be installed both indoors and outdoors, fixed to the external beams of the building or floors. In this case, the most stable materials are used and can be represented by artificial rattan, metal and plastic.

Types of hanging chairs (video)

Master class on making a cocoon chair on a stand

The master class is a great opportunity to make your own model, which will take into account all your personal wishes and will not require significant expenses. Hanging model can be made using any technique, and the main difference is presented self-production a reliable and stable stand made of metal or wood.

Hanging option made of natural linen, practical to use and can be washed in a regular washing machine, therefore most often used in children's rooms and outdoor conditions.

Materials and tools are presented:

one oak stick;
a couple of meters of durable linen fabric;
reliable rope;
carabiner for fastening.

Also for work you need to prepare sewing machine, acrylic fabric paint and brush, drill with drill bits, marker, ruler or centimeter, sharp scissors and iron with steamer.

Step-by-step instruction to create a tissue model:

the fabric piece is folded in half and measured from the upper right corner of 18 cm;
from the resulting current a line is drawn towards the bottom of the fabric;
the resulting triangular element is carefully cut off, and the fabric piece is unfolded;
the top edge is folded one and a half centimeters and the fabric is fixed in this position using a hot iron;
a fold is sewn along the bottom of the fabric strip;
rope pockets are made and a rope is threaded through each side;
the corners are folded by 40 mm and ironed, after which they are stitched;
the process is repeated on the second side of the fabric;
on a wooden stick you need to measure 50 mm and 100 mm sections and drill holes;
An arbitrary design is applied to the canvas using acrylic paint with a brush.

On final stage All that remains is to make a knot on one stretched rope, leaving a section for threading through the pocket on the seat. The second knot is tied at a distance of 80 mm, after which the rope is threaded through the second hole. The same operation is carried out with another fastening pocket. A pair of carabiners are attached to a fixed rack hook and the finished hammock chair is hung.

For mounting, it is best to use special ready-made racks on circular platforms, which are the most mobile. The axial option involves attaching the chair not only to the ceiling, but also to the floor. This option is the safest and most convenient, therefore it is widely used when decorating children's rooms.

How to make a hammock chair with your own hands (video)

Making a hammock chair from a hoop

It is necessary to prepare a standard set of materials and tools presented by:

a metal hoop to create a seat with a diameter of 70 cm and a cross section of 35 mm;
a metal hoop to create a backrest with a diameter of 110 cm and a cross-section of 35 mm;
durable and reliable polyamide cord in the amount of 900 m;
synthetic slings in the amount of 12 m;
a pair of fairly thick and strong cords used to connect the rings;
a pair of wooden rods;
sharp scissors, tape measure and work gloves.

The weaving technology is as follows:

wrapping of hoops, consisting of a complete and maximally dense coating with good tension metal surface hoops with cord. As a rule, the cord consumption is about 40 m per meter of surface;
to improve the density of the coating, every twenty turns you need to make a standard tightening with force, which will allow you to get not only dense, but also the maximum flat surface completed braid;
weaving a mesh with any pattern using the macrame technique. Professionals recommend using the “checkerboard pattern with flat knots” for this purpose. Weaving is done with a double cord made of polyamide, and fixation to the designed braid of the hoop is done using double knots. It is allowed to form fringe knots from the free ends.

At the final stage, the final assembly of the entire structure is performed. The braided hoops are joined on one side by a cord wrap. A pair of wooden rods are installed on the opposite edge from the winding, used as a support for the back. The length of such support rods can be arbitrary. Weaving the back is also done in a random pattern and starts at the top with a gradual descent towards the seat. Slings are attached to the finished product, by which the structure is suspended.

How to properly secure a hanging chair to the ceiling

There are several convenient, practical and reliable options that allow you to properly fix a hanging chair to the ceiling. Standard ceiling hooks are the most common and popular mounting option. However need to remember that this method of fastening can be safely implemented only in cases where the ceiling part is represented by a concrete non-hollow floor or durable ceiling beams. Before fastening, you should ensure that the load capacity is consistent.

If there is a hollow or not very reliable ceiling, other fastening methods must be used, which can be represented by a modern and strong fastening rail installed on a fragment of the base ceiling or mounted around the perimeter of the entire room. Such the system is widely used when it is necessary to effectively distribute the entire load, which will fall on the structure suspended from the ceiling.

Less common, but quite reliable, is the use of a chemical anchor. In this case, a special paste-like modern polymer composition is pumped into the ceiling cavity using a conventional construction syringe, into which the fastenings of the suspended structure are mounted. After this composition hardens, the installed elements are firmly fixed.

How to make a chair from a metal hoop (video)

The very first model of a hanging chair was created by a Danish designer back in the middle of the last century. Since then, the design has undergone numerous changes and improvements, but has not lost its relevance. If you have some skills and follow the basic technology, there is a great opportunity to independently create such an unusual, but very popular decorative element.