This “love story” began a long time ago, a couple of years ago. Once upon a time I had a job, thanks to which I visited almost all the restaurants in the center of Kyiv. In one very cozy establishment, I noticed that all the tables were made from old Singer sewing machines. I really remember this idea. And it lay in my head until the next meeting with a similar table, which took place in the city of Drogobich (Lviv region). Walking around the city, I went into a clothing store self made. It was very nice there. A lot of different very stylish and unusual things and again... a table made of sewing machine... Then this idea was already firmly stuck in my head, and besides, I infected my husband Kostya with it.
The search for the machine began, which, fortunately, did not last long. My great-aunt invited us to pick up her old sewing machine, which had been lying in her dacha for a long time. A lot of time passed before we transported this “treasure” from Vinnitsa to Kyiv, then another six months until we were ready to implement this idea. And we made the table itself in just 5 days and just fell in love with it!
How did we make it?
Step 1
We dismantled the table, threw out the completely outdated tabletop and other parts from the machine. True, they left a box (we put it in it). All parts were washed in the shower stall and cleaned of century-old deposits with a metal brush.
Step 2
Painting the legs. Kostya took all the metal parts to the garage and painted them, hanging them on a wire.
We painted it with wear-resistant 4 in 1 paint. The result was a very beautiful matte finish.
Step 3
Bought pine furniture board. Dimensions: 100 x 60 x 1.8 cm.
For painting, we chose “Pinotex Interior” transparent paint and tinted it purple-burgundy. This color fits right in with the color palette we decided on for the room. In addition, it is dark enough so as not to distract or irritate your eyes while working.
We decided to cover the tree with a roller, since it applies the paint more evenly than a brush and does not leave streaks or grooves behind.
We painted the tabletop three times. We waited 2-3 hours between coats, although this paint dries almost instantly. The peculiarity of “Pinotex Interior” is that it does not leave a greasy layer, but is completely absorbed into the wood, since it is water based. That is, the effect is similar to stain, but this paint, in addition to tinting, also protects the wood.
This is the velvety effect obtained after a three-layer coating. But we decided to cover the tabletop with acrylic varnish for reliability, since this table made from a sewing machine will be a full-fledged one computer desk, with which we will sometimes drink tea or coffee :) We were not sure that “Pinotex” would react favorably to spilled coffee. And the varnish will definitely hold up.
Step 4
Varnishing. Why did we choose acrylic varnish? Firstly, because there is a child in the house, and even if you cover the countertop with oil varnish in the garage, you will have to wait some time until the unpleasant toxic smell disappears. Acrylic varnish is absolutely non-toxic. Secondly, it dries quickly and you can start attaching the tabletop on the same day. Thirdly, this varnish can be applied in a very thin, invisible layer, which was to our advantage, because we still wanted to preserve the velvety quality.
During painting, the varnish has white shade, but then this effect disappears and the layer becomes completely transparent.
Step 5
Marking the table for fastenings. We did it using masking tape so as not to stain the paint layer with a pencil (or something worse :)). Everything was measured and the location of the legs was determined.
We installed the tabletop in the right place.
Ksenia actively helped :)
We put marks in the holes on the legs through which the old tabletop was attached. They will be clearly visible on the tape. Drill holes for furniture nuts according to the marks.
After the holes are ready, you need to drive furniture nuts into them.
You can also play with the nuts: scatter them throughout the apartment, and then collect them together as a family. This activity is suitable for taking a little break from the hard work of creating a table from a sewing machine :)
We attach the tabletop to the legs and the table is ready! This is what Kostino looks like now workplace. True, now we have to fight for the opportunity to sit at a computer desk, because we only have one graphics tablet, but we really want to draw on it :)))
A ficus also joined this love story and, in my opinion, it was very successful.
Now a modest Soviet chair awaits modifications. He will become a laconic addition to the male workplace. But that is another story…
Many people remember the reliable Singer sewing machine. At one time, the German miracle of technology was the pride of any home craftswoman.
Having ceased to perform its main functions, the structure will only get in the way and take up space. Of course, you can throw it away right away, or you can show a little ingenuity and make an elegant Coffee table from a Singer sewing machine with your own hands.
Required Tools
- Wire brush. We choose the option with hard, large bristles. The brush is useful for the initial cleaning of the surface from accumulated grease and machine oil.
- Cleaning agent. Will be needed to process and dissolve contaminants. Any solvent can be used. It is best to use a spray bottle, as it allows you to evenly distribute the liquid over a large area.
- Grinder without nozzle. The tool is powerful enough to remove old layer paints.
- Matte paint for a cast iron bed from a sewing machine. Most convenient to use aerosol can, but regular can paint will do.
- Decorative impregnation for wood. Applied to the countertop for better preservation and additional protection.
- Screwdriver. Designed for quick tightening of self-tapping screws. You can get by with a screwdriver, but an electric tool will significantly speed up the process.
- Self-tapping screws 4.2 x 19 millimeters. You can choose a gold-plated version and use it as decoration.
- Wide brush. Paint brush with soft bristles will help to evenly distribute the impregnation over the surface of the countertop.
Necessary materials
- To make a coffee table from a Zinger machine, you only need a cast iron frame and a table top.
- The size of the lid is chosen arbitrarily; in our instructions it will be 1000 by 600 millimeters and 22 millimeters thick.
Assembly
- Separate the top panel from the legs of the sewing machine table. Usually it is attached to four bolts; to disconnect it, simply unscrew them.
- After this, we begin primary processing. Apply cleaner to the beds. Carefully saturate the folds and corners; dust and machine oil most often accumulate in them. The main task of this procedure is to degrease the surface and get rid of stubborn dirt. We will carefully go over it with a brush with metal bristles and, if necessary, apply another layer of solvent.
- Having finished with preliminary cleaning, we will deal with the old paint. You need to get rid of it using a grinder with a special attachment. Let's go through all the curls and corners of the legs; ideally, there should be no old paint left at all.
- Degrease the cleaned metal and apply a new coat of paint. Distribute the layer evenly over the entire surface; it is most convenient to use an aerosol can for this. In some cases, re-application may be necessary, make sure the paint adheres well and move on to the countertop.
- After production, we cover the tabletop with decorative impregnation. Usually a wide brush is used for this. Impregnation protects wood from rotting and external damage. Saturate the surface thoroughly, applying two to four coats.
- After drying the wood, we proceed to fixing it on the frames.
Place the lid on the floor and place cast iron legs on top. We find the mounting holes; they are located in the corners of the frames. Using a screwdriver and self-tapping screws, we connect the cover to the frames. This completes the main assembly process.
Labor and cost
Processing the beds takes the most time. You may be required to work hard for several hours. Everything will depend on their initial condition.
It took me about two hours to clean the surface of oil, old paint, degrease again and apply a new layer. If the cast iron is heavily rusted, it may take much longer.
Assembling the tabletop and securing it will take about an hour. You will have to wait the longest for the decorative impregnation to dry; this usually takes up to twelve hours.
A bottle of solvent will cost about 100 rubles per 500 ml. Paint – 600 rubles and more, depending on the manufacturer. Tabletop from 300 rubles. The total cost will not exceed 1500 rubles.
Conclusion
This is how, thanks to simple instructions, you can assemble an elegant coffee table from old typewriter DIY Singer. It won’t cost you much, but it will please the eye and do its job correctly for many years.
Always pay attention to old, seemingly unnecessary things. With the right approach and the right skill, they can be turned into something amazing.
In every home there are a couple of unnecessary things that have long been out of order or are not used for their intended purpose. For example, many people inherited an old sewing machine. Don’t rush to throw it away or hide it somewhere away in closets and pantries. Let's look at a few ideas that will give cars a second life.
Metal cutting machine
If the machine has a working mechanism, it can serve as the basis for the machine. If on it manual drive, then it is better to use an electric motor; if you have a foot motor, you won’t need it. Next, you need to remove the mechanisms of the sewing machine, assemble the cutting unit, install a device for securing parts and supply electricity to the machine.
Attention! Before the first start-up, check all installation details and follow safety precautions.
For the kitchen or summer veranda A stylish piece of furniture made from the base of an old typewriter and a tabletop made of wood or glass will do. You can use not one, but two frames, then the table will be larger and more stable, which are better placed closer to the edges.
A cast iron bed from a sewing machine can be used as a base for a barbecue. On top you need to make a roasting pan from metal sheet, which will be placed on the structure of the sewing machine. Thus it turns out good grill, which will decorate any garden or summer cottage and will last for many years.
Important! To prevent the metal from corroding, it is recommended to coat it with paint that is resistant to heat from fire.
You can make an unusual one out of an old typewriter desk for a vintage style home. To do this, you only need its base and tabletop. The legs of the new table can be painted in any color to suit the interior, and the tabletop can be easily made from boards yourself.
If your home lacks a comfortable dressing table, you don’t need to order one from the store. Take the machine statin as a base and attach the tabletop to it the right size, and under it we attach a plywood box for storing cosmetics and jewelry. All elements of a new piece of furniture, if necessary, must be cleaned and painted suitable color, attach a handle to the box
A garden bench in retro style will become great solution for a summer residence or country house. To do this, you need to take the legs from the sewing machine, and attach wooden seats on top. Paint and varnish everything.
From the bed it turns out nice flower beds for flowers and stands for boxes that will decorate any area or veranda.
A beautiful shell is fixed on top of the base of the sewing machine and it turns out interesting thing in vintage style.
Important! If you place it not just on legs, but on a wooden base, the piece of furniture will look even better.
A piece of furniture from the 19th century will be the highlight of any girl's room. You need to attach a ready-made or self-made cabinet to the base of the machine.
This requires imagination and straight hands. An old sewing machine and additional spare parts make a very original product.
The original idea would be lathe. It is necessary to design clamps for wooden block, the machine is driven by the legs.
It’s simple, you decorate the sewing machine and attach a lamp.
Other ideas
There are many options for bringing an old thing back to life, so if you use your imagination, you can find practical and stylish solutions For home interior or garden.
A brief description of the main characteristics of foreign sewing machines from the 50s to the 80s that ended up in our country. As well as a list of old models of Soviet-made sewing machines.
Separately, an overview is given of ancient antique models of Singer-type sewing machines, produced at the end of the 19th and beginning of the 20th centuries.
This material will be useful to you when buying a used sewing machine.
Vintage antique cars from Singer
Almost all models of ancient antique cars produced on a mass scale had not only a standard appearance, but also a similar device. This is due to the fact that the patent for the production of this model of sewing machine belonged to the Singer company. And, despite the different names of the machines, for example Afrana (photo), all of them were produced in those days only under the Singer license.
These types of sewing machine models have long since exhausted their service life and are of no value as a sewing machine or as a production tool. Only lovers retro style In today's fashionable interior design trend, they may be of interest, and only if they are in such satisfactory condition.
These machines have an outdated shuttle design. It was used in the first releases of sewing machines.
Most often, such rare machines are in a very worn-out condition and many of its components and mechanisms can no longer be repaired.
But, nevertheless, there are copies that still work properly. However, it should be noted that the quality of sewing on these machines is quite low and many modern fabrics do not even need to be tried to be sewn on it.
If you need more information or machine repairs, see Singer Antiques.
Sewing machine from Italian company Borletti
A sewing machine from the Italian company Borletti is a rather rare sewing machine brand for our country, but worthy of attention. Look at the photo, despite the release of this model in 1966, it looks quite modern. In addition, it has an excellent folding table. In addition to the zigzag stitch, there are a number of other types of stitches. The choice of stitch is determined by the installed copier (plastic round inserts). Naturally, the machine has an electric drive, a good reliable pedal and a convenient and strong suitcase for transportation or storage.
Chinese Buterfly Sewing Machine
This model of sewing machine is practically no different from the Podolsk sewing machine. Executes just one line. The main difference is that the tail of the bobbin case is turned to the right.
The first models of sewing machines - Chaika 2
The Chaika sewing machine has not only many models, but also series. This photo shows Chaika - 2, one of the first series of this brand. She only performs two lines - straight and zigzag. There are no curly lines. It is quite inconvenient to perform fastening, since this machine does not have a special reverse lever. However, the Chaika 2 sewing machine is more reliable and better assembled than subsequent series.
Sewing machine Chaika 132
The more modern machine Chaika 132 already has a separate reverse lever, convenient device for winding the lower thread and other appearance. Otherwise, it is not much different from the Chaika-2 sewing machine, since it also does not have figured stitches, except for zigzag.
Quite a good model among the varieties of Chaika-type sewing machines.
Brands of old sewing machines – Csepel
Csepel is a Hungarian manufacturer of sewing machines.
This model Csepel - 30 is similar to the lock-stitch machine from the PMZ plant. An unremarkable ordinary vintage model.
Jaguar sewing machine
Mini Jaguar is a fairly common model of sewing machine that performs zigzag stitching. They appeared in our country in the early 90s and almost all of them have a lot of wear and tear.
This machine model has a lot of shortcomings. A miniature electric drive, a rather fragile pedal, and most importantly, many components and gears are made of plastic. Difficult to repair and configure.
Adolf Knoch sewing machine
The Knoch sewing machine was produced in Germany. German engineers are considered the founders of the design of sewing machines. Therefore, and for a number of other reasons, German sewing machines are considered reliable and of high quality.
This model of Knoch sewing machine only performs one stitch. Despite the fact that she has more modern look And modern device winding thread on a bobbin, it is quite simple and not very suitable for sewing modern knitted fabrics. The price of such a machine in perfect condition, fully equipped and operational, ranges from 1500-2000 rubles.
Brands of old sewing machines - Kohler
Another version of the German sewing machine. In the old days, such equipment cost the same as a car now, but in our time such old, morally and physically obsolete specimens can only be of interest to a schoolgirl doing homework assignments for labor lessons.
Kohler Zick-Zack Sewing Machine
This model from Kohler already bears the name Zick-Zack, since it is capable of performing not only a zigzag stitch, but also a number of other figured stitches.
Enough interesting model sewing machine Not only does it handle a variety of stitches, it also has a number of unique thread tension and needle position (offset) settings.
Even foot models of Kohler Zick-Zack sewing machines have a built-in light.
In good working condition, the price of such a machine can reach 3 thousand rubles, but no more. Any old sewing machine, even in perfect condition, cannot be expensive. Morally and physically, they are so outdated that they may be of interest to people who are starting to learn to sew or who are very strapped for money. Give it to those in need, and your kindness will be returned to you with interest.
The Lada sewing machine is very good machine. And this is due to the fact that it was produced only for export. Name Lada symbol series of sewing machines Chaika, produced for sale abroad.
Despite the fact that this particular model is quite old, it performs a zigzag stitch, has a built-in lamp and a number of other advantages.
Brands of old Polish sewing machines – Lucznik
Lucznik or Archer is a brand of sewing machines produced in Poland. If you are offered to buy such a machine for 1500 - 2000 rubles, you can safely buy it. It performs a zigzag stitch and a series of decorative stitches. It is possible to include two needle positions relative to the center (left, right). This is necessary when adjusting the zipper. Very convenient removable table, etc.
Sewing machine Malva made in USSR
Malva is a complete analogue of the Chaika sewing machine. Performs two stitches - a straight stitch and a zigzag stitch.
Brands of old sewing machines - Minerva
Minerva is a brand of sewing machines produced in Czechoslovakia. Reliable quality machines. This machine model (photo) is similar in capabilities and design to straight-stitch sewing machines Podolsk and Singer.
Sewing machine Naumann (Germany)
The Naumann sewing machine was produced in Germany. High-quality stitching, reliable and durable machine. This model of Naumann sewing machine performs only one straight stitch.
Italian sewing machine Necchi
Necchi - Italian company, which has been producing sewing machines since 1924. This model of sewing machine from Necchi (photo) performs two types of stitches: straight and zigzag. Very interesting, original design, but in case of breakdown it is almost impossible to find spare parts.
Radom is a brand of Polish sewing machines.
This model of the Radom sewing machine is similar in its capabilities and design to the Chaika 2 sewing machine. But the build quality and reliability of the parts is superior to the Chaika, which makes the Radom machine more reliable and durable.
This Radom model also performs a zigzag stitch, but its design is very outdated.
Veritas Rubina made in GDR
The Veritas Rubina sewing machine is a very good machine in all respects. It has a modern look, electric drive, light. Lightweight plastic The case makes it easy to carry. Performs many stitches, including buttonhole sewing. There are many replaceable feet and a convenient reverse lever (tack). High-quality stitching without gaps
The only drawback is that the country of the GDR, which produced Veritas Rubina, has long since disappeared, and spare parts for it will be very difficult to find.
Models of old sewing machines - Singer
Of all the models of used sewing machines sold in our country, we can especially highlight the Singer sewing machines produced in the early 90s. Reliable, high-quality machines. All parts are made of metal, as evidenced by its weight. But there are also disadvantages. However, if the machine is fully equipped with presser feet and ideally sews any fabric, then you don’t need to know about them, especially if the price of the machine does not exceed a couple of thousand rubles.
Models of Finnish old sewing machines - Tikka
Tikka sewing machine - Tikka was released in Finland. The quality of this sewing machine model is impeccable, as is its beautiful appearance. This model of Tikka sewing machine only performs one straight stitch.
Models of old sewing machines – Tula
Original sewing machine Tula is a complete zigzag. There are many interesting original design solutions, but there are also disadvantages. If you have a choice between Tula and Chaika, then it is better to buy Chaika. The price for both used cars (Tula, Chaika) is the same, no more than 2.5 thousand rubles.
Sewing machine Union made in USSR
The Union sewing machine is similar in appearance and design to the Podolsk sewing machine. Its only difference is that the Union series of sewing machines was intended for sale abroad.
The best sewing machine - Veritas
If you choose the best brand among the old models of household sewing machines, then you can safely name the company Veritas. Why Veritas can be found in other articles on our site. In this article we will only add that you can pay 3 thousand rubles for a Veritas sewing machine in good condition (even such an outdated model).
See Old Used Sewing Machines.
The sewing hook of such a machine rotates in a circle, which is rare even on modern expensive machines.
And for such a Veritas model in perfect condition, as in this photo, you can pay five thousand rubles.
How to choose a sewing machine for your home
First of all, what people pay attention to is how the sewing machine looks externally. And even understanding that this cannot be the main criterion when choosing a sewing machine, nevertheless, often this criterion becomes decisive.
Old used sewing machines
How much does an old used car, produced in the USSR, cost? At what price can you buy or sell it? What brands are they and how do they differ from each other and from modern cars.
The master's reviews about sewing machines
This article contains reviews from a service technician about some modern and old models of sewing machines. Except household machines There are also reviews about industrial models of sewing machines. There are several reviews about overlockers, carpet lockers and even furrier machines.
Review of the Japanese sewing machine Juki 510
We offer detailed review capabilities of the Juki 510 sewing machine. This model of machine was produced in the 90s in Japan.
Installation and repair of the Juki 510 sewing machine
How to disassemble a sewing machine. What mechanisms in it can be regulated independently. Installation and repair of the Juki 510 sewing machine.
Sewing machine Husqvarna Practica
Instructions for the Husqvarna Practica sewing machine. Recommendations for the care, adjustment and repair of the Husqvarna Practica sewing machine.
How to clean an iron
How can you clean the soleplate of an iron from burnt marks and scale inside at home using only simple remedies cleaning.
How to make a table from an old Singer sewing machine
Many people know how Singer sewing machines appeared. What happens if the machine breaks down or you have a newer model? You can sell it or give it to friends. But quite often they simply forget about it, and it continues to gather dust in the corner. Many are taken to the garage, to the country house or to scrap metal collection points. And here the story of the legendary cars can end.
But, the legacy of Isaac Merritt Singer, in Lately enjoys enormous success, and as a rare item arouses great interest among people with a creative approach: both specialists and just amateurs. Because there are quite a lot of ideas for using already unnecessary machine legs. 
And every time you can find something new and original. So don’t rush to get rid of the “junk”; you can always throw it away, but then finding a similar machine will be more difficult.
The sewing machine has a cast iron frame, and the machine is directly attached to it. The openwork cast iron frame is elegant and attractive in appearance. It can fit perfectly into the interior, creating the coziness and harmony of the last century in the house. 
So if you still have a machine like this, you are very lucky.
How to make a table from an old Singer sewing machine
A little time and imagination and there will be a new and interesting thing in your home. What it could be is up to you to choose. You can make a computer or dinner table, dressing table in the bedroom or flower stand on the balcony. 
Before you start creating your masterpiece, the legs of the sewing machine need to be prepared. After all, over many years of using it for its intended purpose, particles of dust, dirt and machine oil have accumulated on it. Therefore, before starting work, the bed must be thoroughly washed.
The legs can be painted any color you like. It is better to use anti-rust paint, because over the long years of their life they could have lost their original appearance. 
Dining table made from an old Singer sewing machine
You can make a wonderful dining table from a cast iron frame. We prepare and paint the legs, choosing the paint color to suit your taste. The tabletop can be round, rectangular or square. 
In an apartment or in a country house, such a table will definitely gather the whole family over a cup of tea. 
Computer desk
Dressing table in the bedroom
And what a wonderful vintage dressing table for the bedroom you can make from the same unnecessary legs from a sewing machine. It is better to choose calmer colors; light beige will look great. 
And in small drawers You can store cosmetics and other small items.
Vanity table
Table-stand for flowers on the balcony
If you love indoor flowers and you have a lot of them, you can make an interesting stand for them. A table like this with plants will look very nice. You can put it both on the balcony and in the room. 
The tabletop can be decorated with mosaics. And if you have the ability to draw, decorate it with an interesting pattern. Glass countertops will look no less original than those made of wood. Sometimes during work your own problems may appear. interesting ideas, how else to decorate the future table. The main thing is to let your imagination express itself in full force. 
Here, of course, you cannot do without male help, so you can ask your husband or father. Men will be happy to take part in the creative process, and maybe even suggest a couple of interesting ideas.
Home theater stand
For example, how to make a stand for a home theater. And to do this, you need to separate the side legs from the frame, remove the wheel and pedal and install shelves instead. You will get this unusual bookcase. 
These are just a few examples of how you can use the legs from an old Singer machine as a base for beautiful table. And the pedal and wheel will always attract the attention of children and can captivate them for a long time.
This is how you can give very easily new life old things.
This is also interesting
Painting a sewing machine near Zhostovo
One day, an antique Singer sewing machine, in almost working condition, “floated” into my raking hands.
Original ideas for using an old sewing machine in interior decor
The functionality of the sewing machine was restored to 95% by me, after about three days of persistent tinkering with the mechanical part, after which it began to sew perfectly. The only thing I wasn't happy with was its appearance: the stand was cracked and wobbly on all its tenon joints, the paint on the body was chipped and worn off in many places, the chrome parts were scratched.
This is what the Singer sewing machine looked like before my creative intervention (the mechanics were removed). Throughout the body there is a certain angular monogram ornament of the Art Nouveau style. In general, the ornament is built in “Ra-symbolism”: the sun, the sphinx, lotuses, wings - stylized in the Egyptian style.
I thought about it for a little while, about a month or two, and decided to give my Singer a look worthy of its status.
Preparation for painting was difficult and lengthy. I immediately gave the stand to carpenters I knew, who immediately broke it down, sanded it efficiently and reassembled it. It turned out that the stand was made of mahogany, nothing else. I planned to simply paint the stand in a more dark color, tint with stain, however, when I covered the wood with one layer of varnish, I realized that the color was already perfect without tinting.
The machine itself took a long time to scrape down to bare metal. All the old paint along with the primer had to be removed. Several types of sandpaper, knives and an awl were used for the most microscopic parts and holes.
Once the metal was completely free of paint, I wiped it down with acetone and applied two coats of automotive acrylic spray primer. Each layer of soil was lightly sanded very carefully with fine sandpaper. In the next photo, the body of the machine and all its other spare parts are already covered with soil. In order not to splatter the chrome and other parts that do not require painting, I sealed them partly with masking tape and partly with electrical tape.
It is best to paint on metal, even over a primer. oil paints, and not on turpentine, but on a tee: oil, turpentine, varnish. Stylistically, the traditional Zhostovo painting on trays, where lush buds of a flower bouquet seem to emerge from a dark background, was most suitable for the surface and character of the product.
The first attempt at painting was unsuccessful. The next photo shows the original underpainting, which was washed off the next day because it was not what I wanted.
But this is what you need.
And almost the same floral design on the stand, but with some differences.
Gilding has already been added to the painting on the stand. Zhostovo, although it uses gold in painting, is not in the quantities that I used. By the way, my gold is gold powder mixed with acrylic varnish. Let's add gold decorations to the ornament on the body.
Close-up:
After complete drying, the painting of the car was covered with three layers of automotive acrylic varnish the same series as the soil. Each layer of varnish, except the last one, was carefully cleaned with zero sandpaper(“null”) in the presence of water (wet sandpaper).
The stand is coated with PF varnish in the standard way for wood.
The photos show a brand new assembled Singer. It's like it came off an assembly line this morning.
Well, that's all. My Singer sewing machine is painted in an imitation of the Zhostovo style. The program is at most 100 percent completed. The result, to be honest, exceeded my expectations.
What is the future fate of the sewing machine?
I don’t know yet, but most likely I will sell it.
Postscript for those who like to steal other people's material and transfer it to other sites! Copying the text of the Singer painting master class to other sites, especially Liveinternet, is strictly prohibited! Copying any images from this page to other sites is strictly prohibited!
Master classes » Various Master Classes and crafts
