In the era of newfangled building materials and brave design solutions It’s difficult to surprise someone with standard rectangular doors. Therefore, very often, when choosing a design for their apartment, many owners decide to decorate interior openings in If you show a little imagination, such designs can not only combine the space of several rooms, but also become the most attractive decorative element in the entire room. The decoration of arches can be done in a variety of options, to suit every taste and budget. What materials can be used to decorate? unusual shape and how to do this job with my own hands, we will consider in this article.
Selection of finishing materials
Since arches gained popularity quite a long time ago, manufacturers of modern finishing materials managed to launch production of products focused specifically on this element of the interior. Today in specialized markets you can already find finished goods made of wood and MDF, which just needs to be inserted into the doorway.
If you do not want to limit yourself to standard solutions or the passage already has a rounded shape and just needs to be decorated, you can use the following materials:
- wallpaper (any variety);
- decorative plaster;
- cork;
- molding;
- polyurethane;
- mosaic;
- decorative and natural stone.
The arches can be decorated using any of the options listed, the main thing is that it fits well with the design of both rooms. In order to assess the complexity of the work, we will dwell on each material separately.
Paper and cork wallpaper
Finishing with arch wallpaper is considered the easiest to perform and budget option. Here you don’t have to worry about the combination of materials, since most often the walls and the opening are covered with the same canvases.
It would seem that such a finish would be mediocre and unattractive, but if you are smart, you can give the arch a very impressive appearance.
Using brick-like wallpaper will allow you to create inexpensive
Bright wallpaper with large patterns will help to add contrasting notes to the interior. They form only the vault of the arch, and at the joints of different panels there are special corners protecting them from abrasion.
IN Lately arches are often decorated with cork wallpaper. Their use helps to decorate and highlight the interior passage area against the general background. The material can be used even in places of high humidity, but only in this case it is necessary to choose options that have a wax coating.
Arch wallpapering technology
Before you start gluing wallpaper, the surface of the arch and adjacent walls should be well leveled using putty.
Next they prepare the glue. Experienced experts advise mixing a thick adhesive solution. This allows you to achieve excellent grip in places of sharp bend and makes it possible to move the canvas for better joining.
The first strip is glued to the wall located near the arch. The next one is positioned so that it is half closed. The protruding part of the glued fabric is cut off, leaving an allowance of 25 mm. Along the entire length of the resulting stock, small cuts are made (at a distance of 20 mm from each other), which are folded using a roller inner side and stick. This way the entire opening is covered on both sides.
Next they move to the vault of the arch. A strip is cut out of the wallpaper, the width of which is equal to the depth of the opening itself. Taking into account the arrangement of the elements of the picture, it is glued to inner surface arches and side walls. To prevent the formation of air bubbles, smooth the wallpaper with a clean roller.
Installing cork wallpaper is no different from working with paper, so we won’t dwell on it separately.
Decorative plaster
Finishing can be done using an even simpler method - applying decorative plaster.
Before using it, it is necessary to eliminate all defects on the wall surface. Using putty and a spatula, smooth out all the unevenness, mask the seams and hide the caps of the fasteners. To ensure reliable adhesion of the material to the base, the arch is treated with a primer and left to dry for a day.
When it is completely dry, it can be painted with special paints or simply treated with finishing solutions.
Molding
Finishing is often carried out by combining various materials, and the highlight of such an interior are moldings.
This concept usually means a wide variety of decorative elements in the form of curly, narrow and long stripes. They can be made of plastic, foam, wood, MDF, metal and other materials.
Moldings go well with all types of wallpaper and decorative plaster. Such strips are installed at both ends of the arch and secured using liquid nails. For the best combination with the interior, it is recommended to use such elements not only to decorate the opening, but also to decorate the surfaces surrounding it.
Products made of polyurethane
Recently, arches are often finished using polyurethane. This is a dense and fairly flexible material from which decorative elements are made. white in the form of stucco.
This finishing is attractive because its cost is much lower than, say, decorating with stone or tiles. Installation of polyurethane is very simple - using specially designed glue. The lining of the opening can be done in two versions. In the first, the arch is decorated simultaneously from both the inside and the outside. In this case vertical racks can be designed in the form of round or square columns, expanding upward.
If massive structures do not fit into the surrounding interior, you can only make edging of the corners from more elegant elements.
Natural and artificial stone
Finishing an arch with decorative stone is the most labor-intensive process, but the result is always impressive. This type of cladding looks most impressive when not only the passage is finished, but also part of the adjacent walls. Both symmetry and asymmetry are relevant here. If the openings are located close to each other, you can decorate the interior with smoothly transitioning cladding from one arch to another. Regardless of which option is chosen, natural materials always look rich and impressive.
Another thing that speaks in favor of the stone is that it does not require perfect smooth surface, due to which there is no need for its thorough preparation.
However, there are also difficulties associated with using this material.
First of all, it is its weight. Natural stones It is not recommended to use it for cladding structures made of plasterboard, as this can lead to deformation and even destruction of the opening. Here it is better to use plaster or acrylic imitation, which looks no less elegant.
Also, finishing the arch with stone becomes very difficult in rounded areas. Inexperienced craftsmen have to tinker with it in order to do the job beautifully and efficiently.
Installation of decorative stone
Facing is carried out in several stages:
1. The surface is puttied to remove large irregularities.
2. Prepare the adhesive composition. The most commonly used mixture is lime, cement, sand and glue. If light grades or gypsum imitation were chosen for finishing, you can fasten them using ordinary liquid nails.
3. The first stone is laid at the very bottom, at the junction of the wall and the arched opening. It is leveled and pressed tightly against the wall. To avoid having to seal the corners at the end of the work, the material is overlapped. To do this, the tiles of the first row from the floor are attached flush to the opening, and the tiles of the second row are moved inward by a distance equal to its own thickness. So, by alternating rows, the entire cladding is done.
4. When finishing the arched part of the opening, the material is applied to the arch, the cut line is marked and all excess is removed. Here you can use special nippers or an angle grinder.
5. All angular and sharp edges are carefully sanded with a file.
6. The resulting seams are filled with a special grout.
Mosaic
Decorative finishing arches in places of high humidity (such as a bathhouse, bathtub, kitchen) are most often made using mosaics.
In this option, it is possible to use products made of glass, ceramics, metal, concrete or tiles. The material is laid out on a prepared and smoothed surface, where it is attached to a specialized compound. The glue is applied with a notched trowel simultaneously to the wall and the tile, after which the product is pressed tightly to the surface. The seams are carefully rubbed with special colored compounds.
Using patterned tiles makes laying a little more difficult as the material must be positioned according to the pattern, but the end result is well worth the effort.
Conclusion
The modern construction market is so diverse that it is difficult to list all the cladding options. doorways It's simply impossible. Designers are increasingly using bamboo, textile, mirror, forged and other elements to create interiors. We tried to consider the most popular materials that can be used to decorate an arch. The photos presented in this article will help you get an idea of this or that method of decoration, and maybe even lead you to create own project. We hope that the recommendations outlined will provide significant assistance to all beginning craftsmen.
Among the most popular elements for finishing openings, the arched corner should be noted. Security element, which at the same time performs the function of decoration, is manufactured in two types: metal and plastic.
Installation is not difficult, but has features that a person doing the work with his own hands should know. So, let's look at how the arch is finished plastic corner.
Important function of arched corners
The finishing corner has been used for many years to simplify repair work. It allows you to form corners and also protect the doorway. The main advantage of arched corners is the possibility of extending the service life of the finish, since with them the wallpaper will not break off at the corners and the paint will not be erased.
And if during the installation of an interior arch it is necessary to plaster the corner from chipboard or plasterboard, then aluminum corner will allow you to display 90 degrees. Any home corner is subject to external influence, especially for arched openings - rearranging furniture or regular Saturday cleaning can damage it. There is a solution - glue a decorative corner.
Important! A perforated corner provides a smooth edge for a curved design. At the same time, the consumption of putties is reduced.
Thanks to perforation, the corner can be framed not only with clear lines, it can be folded in and out various shapes. The soft curved element makes it possible to design not only square or rounded arches into classic style, but also to create semi-arches, as well as openings with non-standard bends. Arch corners have the following advantages:
- Affordable price.
- Practical - can be used in most interior solutions.
- Finishing – produced in a wide color scheme.
- Installing decorative elements is not difficult.
Necessary tool
The plastic corner for the interior arch must be properly secured. For this purpose, a list of such tools is prepared in advance:
- Plastic element to match the style of the room.
- Assembly adhesive.
- Liquid nails will help attach the element.
- Rubber mallet.
Important! Gluing decor using liquid nails is simple, but risky. Firstly, the plastic can be damaged, and secondly a large number of the material used leaves greasy marks on the finish.
It is best to attach a bent corner using assembly glue or liquid nails, since installation with metal nails or screws looks awkward and also increases the chances of cracks and chips.
Drywall is one of the most common materials for creating interior portals. It is lightweight, attached to the frame and makes it possible to draw internal and external radius corners. Since the material requires subsequent cladding, corners are used for ease of design. Glue for installation - putty.
Finishing an arch with a plastic corner (video)
Installation of decorative corners
Any apartment will look much more impressive if the edging of existing arches is decorated with plastic corners. Therefore, let's look at how to glue a plastic corner to an interior arch and make the frame durable and reliable.
There are two needs to use a PVC part: to glue and remove a right angle, or to paste over an arc. Condition for creating right angles:
- Surface treatment with a penetrating primer solution.
- Use a square to mark, mark and cut to the required size with a grinder.
- Apply the adhesive mixture to two inner planes of the element.
- Apply the strip, gently pressing it along its entire length.
The flexible corner for the arcuate arch is fixed in a slightly different way. Photos and videos will help beginners understand the differences and features of installation. Installing such an element yourself will be no more difficult than the previous option, but pay attention to the following nuances:
- The width of the sides of the corner when finishing the arc varies. The wide side is laid on the end corner of the arch, and the narrow side is pressed against the wall.
- Silicone sealant or adhesive solution is applied to the element, as in the first case.
- You need to fasten it with several nails - a necessary measure, since the hot solution must completely set.
- Instead of nails, it is allowed to use masking tape - it secures the edge of the plastic corner.
Important! It is prohibited to use a home or construction hair dryer to speed up drying, especially if photo wallpaper or paint is used for the walls.
Corners for interior arches are easy to glue onto wallpaper. The finishing material quickly sets with glue and allows you to test your strength the very next day. But if you want to cover an arch with an MDF corner, then use these tips:
- This type does not require additional fixation, but after applying glue to the corner and pressing it to the surface, wait a couple of seconds and then peel off the element again.
- After waiting for the glue to thicken, you can safely return it to its place. Usually 1-2 minutes is enough.
It is better to use a wooden corner for arched openings made of the same material. It is difficult to bend, so you can glue it on straight planes. Ideal use is rectangular portals where there is no round element.
Interesting! Among the abundance of finishing elements, you can choose cork, rubberized, rubber corners. A rolled and flexible rubber corner is simply necessary in places where water hitting the surface makes it slippery. These can be glued to tiles and concrete if necessary.
It is also possible to cover the arch using ordinary plastic corners, but in this case the elastic threshold will be much smaller. In order to bend the product without damaging it to the right size, you should heat the material with a hair dryer.
For decorative design arches and walls, polyurethane and polyurethane foam are used - in this case, all surfaces must be smooth. If there are small differences, then you need to glue the elements together by gently pressing and increasing the amount of glue in these places.
Photo gallery of finished works
The arch is one of the most effective ways revitalizing apartment design. With the help of this structure you can not only transform the environment, but also give it beauty and originality. Arches come in a wide variety of shapes and sizes. Finishing an arch with your own hands can be done using various materials.
Finishing
- overlay elements made of polystyrene;
Finishing material can be found in any hardware store. Modern industry boasts a variety of arched elements, for the production of which wood and were used, as well as baguettes made of polyurethane, and components made of natural and artificial stones.
Options for finishing an arched opening
Now we will look in more detail at how you can decorate an arch with one material or another.
The easiest way to finish an arch is to cover it with the same wallpaper as the walls. First you need to prepare the glue - the consistency should be slightly thicker than that used for gluing the walls. The first strip should be glued next to the arch on the surface of the wall, and the next so that it covers a piece of the arched opening. The protruding part should be carefully trimmed, leaving a small allowance (about 3 cm), which then needs to be cut every 2 cm, folded and glued to the slope.
The vault of the arch requires a strip of wallpaper that matches the width of the opening. Finally, the wallpaper must be carefully smoothed to avoid any air bubbles underneath.
If only the arch is covered with wallpaper, then it can be framed with a decorative plastic corner.
Finishing arch openings with natural materials is the most popular trend in the modern construction market. The most important thing is to choose the most suitable type of product.
If the priority characteristics are environmental friendliness and naturalness, then finishing the arch with cork would be appropriate. This material sold in panels or rolls. The last option is more suitable for this type finishing works. An analogue is cork wallpaper on a self-adhesive base (if it is missing, then you should use acrylic glue).
Before you begin finishing, you need to putty, level and dry the arched structure. The sequence of applying cork coating completely coincides with gluing ordinary wallpaper. In an apartment with high humidity, you need to use waxed cork or coat the finishing material with varnish.
Stone
Finishing interior arches with stone will require the following materials and tools:
- fake diamond;
- cement;
- lime;
- glue;
- sand;
- construction knife;
- pliers.
An arch trimmed with artificial stone fits well into a room whose design is associated with eco or country style. In order to achieve best result, you need to line not only the opening, but also part of the wall surface near it. Both symmetrical and asymmetrical finishing methods will look original and impressive. Tiles can be used from artificial stone any structure externally similar to granite, sandstone, marble or brick.
Good grip of this finishing material with the surface is ensured by preliminary plastering of the arch and its priming. After making a few cuts, you can proceed to cooking. cement mortar. The most difficult moment in designing an arch is finishing the corners. To avoid unpleasant moments, you need to overlap the tiles. That is, the first tile should be glued flush with the opening, and the second should be shifted by an amount equal to the thickness of the tile. Further cladding should be based on the following principle: each even row is overlapped, each odd row is offset (the edge of the tile must coincide with the arched opening).
Approaching the upper curve of the arch, you must first take measurements and mark a cut line, and then use a construction knife to run along it several times and break off unnecessary parts with pliers. You can get rid of unevenness using a file.
Film
No less popular, due to its practicality, is the finishing of plasterboard arches with self-adhesive polymer film - a special artificial material, very wear-resistant and embossed. The laminated surface will not be damaged in any way. Sun rays, neither temperature fluctuations, nor even high humidity. And its main property is the ability to withstand various types of deformation over a long period of time. Another important advantage of laminated coating is its ease of maintenance - it is very easy to clean.
Besides, artificial material always saved the family budget. And the opinions of many experts agree on one thing: the appearance of the laminated coating does not lag behind natural materials. Numerous Variety design ideas and the presence of rich color palette allows you to find suitable option even for a finished interior.
Decorative finishing door arches can be made from almost any material - it all depends on your imagination and budget level. In this case, you need to stock up on various accessories: decorative molding or a plastic corner, which, by the way, is cheaper.
The biggest difficulty in finishing the arches lies in its arch part. Optimal for this area is the use of elastic and highly flexible materials. If there are none, then you will need to be patient, which will be required when facing the arched vault using narrow and very small parts. A luxurious look can be achieved, for example, by using colored mosaics.
If making a semicircular vault of an arch turns out to be an impossible task, then you can transform it into a broken figure or trapezoid. To finish an even fracture, you can use the most various materials: lining, laminated or parquet board, as well as cork panels.
Video
This video shows how the assembly and finishing of an interior arch occurs:
How to make bricks on an arch? Very easy! Watch this video:
Photo
Arches – modern solution and a stylish accent in interior design. The design of such an element requires a serious approach, so consider the possible forms, types and arrangement options.
The first step is the choice of material, which depends on many factors. Firstly, the arch must meet important requirements: strength, durability, practicality, safety, resistance to negative influences. Choose materials that can withstand high humidity and mechanical impacts that do not emit harmful substances into the environment without changing properties. Secondly, the element must fit organically into the interior. The following materials are used for the manufacture of interior arches.
Drywall
It is easy to work with, giving the arch any shape and experimenting with the design: the sheet is bent and cut. The material can be durable if you choose the right thickness. withstands direct sunlight, humidity, temperature changes. It can serve as a base, and any external decorative finishing is allowed.
Tree
Aesthetic, noble, safe and environmentally friendly material that fits into different styles. But wooden arches that are not treated with special impregnations are subject to change. environment: increased or low humidity air, temperature changes, ultraviolet radiation. Under the influence of negative factors, the material deforms, cracks, swells, and burns out. There are ready-made prefabricated ones for sale interior arches, processed and do not require complex installation and maintenance.
Plastic
Not a common material, but it is light and has affordable price and is able to imitate different surfaces. But plastic arch subject to mechanical stress, causing cracks, scratches, chips.
Styrofoam
Lightweight and cheap, arches of various shapes are made from it, including complex ones. Elements made of this material are fixed to the base with glue, puttied and decorated with paint or plaster. But foam plastic is subject to mechanical stress and crumbles due to fragility.
Gypsum
Used to make arches of various shapes with or without columns. The material looks aesthetically pleasing and attractive, but has significant weight, loses its properties when in contact with water and is destroyed under significant mechanical stress.
Brick
Available, relatively inexpensive and easy to install material. But it narrows the opening and does not fit into all stylistic trends. The disadvantages include a rough, unaesthetic appearance. But for finishing you can use a thin facing different textures and flowers.
Stained glass arch
It will transform the appearance of the arch, making it airy and light. The material may be durable, but thickening and special processing(hardening, film coating) increase cost and weight. Working with glass is not easy, and it can become chipped and cracked if handled roughly and carelessly.
Decorative rock
It is used for finishing and is characterized by high strength and durability. You can purchase a ready-made prefabricated structure or decorative elements small sizes allowing different ways. But the stone has a significant cost.
Fiberboard and chipboard
These are budget and practical options, providing the opportunity to arrange an arch of any shape. Materials can be supplemented different coatings and finishing materials.
Arch design
The design of the arched passage should fit organically into the interior, and its development must be approached competently. Consider the ideas of an arch in an apartment or house:
- The Roman (classical) arch has a regular semicircular shape, laconic design. This a good option for a room with high ceilings and a wide passage.
- The British archway has an elongated arch with a truncated radius and a straightened arc. This option is appropriate if the ceilings in the room are low.
- The Slavic arch is a rectangular opening with roundings in the upper corners. The option is universal, practical and fits into different styles.
- The Turkish arch looks rich, has intricate shapes and luxurious decoration in the spirit of the Sultan's palaces.
- The Gothic arched doorway is distinguished by a pointed vault at the top. The design requires high ceilings and appropriate decoration made with ceramics, stone or mosaics.
- Thai arch – interesting option, characterized by an asymmetrical shape. The design has one side rounded and the other a right angle.
Decorating an arch in an apartment
The design of the arch begins with choosing the shape of the passage. It depends on the design of the element, the interior of the room and the preferences of the home owner. Types of forms:
- An elliptical arch has a vault in the form of an ellipse.
- U-shaped resembles a horseshoe.
- Asymmetrical arches are distinguished by irregular, complex shapes.
- A parabolic shape is two arcs connecting at the top point without a point, that is, a parabola.
- The three-center arch has three pronounced curves: in the center of the arch and along its edges.
- A round arch has a vault that is a full circle or most of it.
- Semicircular shape - half a circle.
- A segmental arch has a vault consisting of a segment of a circle.
- The trefoil-shaped arch has a vault consisting of three semicircular petals.
- The shouldered arch has a complex arch with rounded edges and a small rectangular opening in the upper part.
Having decided on the shape, proceed to finishing. Cladding can be carried out ceramic tiles, MDF panels or PVC, wood, decorative stone, plaster (fine-grained, Venetian, coarse-grained), paint or even wallpaper. The finishing depends on the style of the room. Wood will fit into a classic interior, stone into an English interior, plaster, ceramics or stone into a Mediterranean interior, brick into a loft, panels with imitation of different textures and unusual textures into Art Nouveau, pop art or kitsch, majestic plaster columns into Baroque, in high-tech - plastic or glass.
Complete the cladding original design. In the upper part you can install halogen or LED lights, additionally illuminating the passage. It looks original when thrown around the perimeter LED Strip Light. Decorate the arch with fresh flowers in pots or artificial weaving ones. If the wall is significantly thick, you can install built-in shelves along the edges, placing accessories or books on them. Moldings, stucco elements, and painting are used for decoration.
How to combine arched openings with other interior elements
Interior arches can fit into different interiors, but must resonate with other design components. The vault can be supplemented with elements of identical or similar shapes. These can be niches, podiums, window frames, storage systems, furniture.
The cladding of the arch should fit into the decoration of the room, so use similar or matching materials to avoid disharmony. For example, stone is in harmony with plaster and matte paint. Wood will complement plain wallpaper, brick will refresh rough walls designed to look like concrete.
Advice! Complete the arch with accessories in the same style.
Options for the arch-portal device
Arches in apartments look original, but the arrangement of the element is labor-intensive and complex. A good alternative would be a portal - a classic rectangular opening. It’s easy to set up: just remove the door with the frame and create a passage.
You can organize a portal using any materials used to design arches. Use regular ones door frames, decorative stone or brick, drywall, plaster, tiles, wall panels.
How to turn a doorway into an arch with your own hands
Converting a standard doorway into an arch is not an easy task, requiring construction skills and tools. You need to remove the door, if there was one. If the passage is installed in the wall, you will need a grinder. Mark the boundaries of the opening and cut it out. To form the vault, plasterboard is used, which is given the desired semicircular shape.
If you have a ready-made rectangular passage, all that remains is to round off its corners. If you create a new opening, you can immediately set it to the desired shape. But cutting will require accuracy and perfect command of the tool. To round the corners, plasterboard is used, fixed to a frame made of metal profiles. To the aisle the desired shape the material can be secured with glue.
How to make an interior vaulted arch
The difficult task is creating a vault. Drywall is used to round the upper part of the passage, forming the basis for further cladding.
Instructions:
- The finished opening is complemented by a frame. The metal profile must be cut in the right places to form bends, rounded and secured to the passage with dowels.
- Prepare the drywall by giving it a rounded shape. The sheet must be treated with a prickly perforation roller. Moisten the surface and leave the material to soak for several hours.
- Bend the sheet carefully to avoid damage and to set the desired shape.
- Fix the drywall to the metal profile frame using a screwdriver and self-tapping screws.
- Sand all joints.
- Proceed to the cladding using the materials selected for finishing.
An arch is a stylish accent element of any interior. It will refresh the design and make the room original and spacious. But organizing this element will require effort, knowledge and skills. Approach the process responsibly to get an attractive and aesthetic arch. 
With the rapid entry into interior fashion of studio apartments and combined spaces with the effect of visual zoning, various arches have become an integral attribute of many interiors.
Initially, builders erected this architectural element as a ceiling for through or blind openings in walls, as well as for the purpose of creating lateral expansion, but modern designers looked at it in a completely new way and now very often use an arched frame as a decorative element during the implementation of various design projects.
7 ways to improve an arch in an apartment
If your house or apartment already has an arch, you can decorate it in an original way, even without the help of specialists, making it an expressive accent in the overall interior composition.
We offer several simple ways arch frames that you can create with your own hands:
- cover with textured trellises or wallpaper with an original design;
- lay out with natural or artificial stone;
- improve by installing linings made of valuable wood around the openings;
- decorate with decorative plaster;
- paint and stencil;
- veneer around the opening with mosaics or mirror tiles;
- cover with polyurethane moldings;
- decorate with stucco molding.
Any of the above options does not require special knowledge or special skills - it is enough to accurately determine the method of decorating the arches in the apartment and stock up on yourself before starting work. necessary information, consumables and tools. In such cases, watching several video tutorials that reveal secrets of one type or another helps a lot. construction work or technological processes.
An accessible and inexpensive way to decorate an arch is to wallpaper it
An effective and, at the same time, option for designing openings accessible to absolutely everyone is to frame the arches with wallpaper. For this purpose, you can glue textured, colored trellises or cover the arch with panels with an original, eye-catching print. An opening covered with bright wallpaper looks very cheerful against the neutral background of the walls. The main thing is to choose wisely color scheme, which echoes the color scheme with other interior accents in the apartment, for example, textiles. It is permissible to glue several different types trellises or, if there are several arches in the apartment, cover them with contrasting wallpaper, but it is desirable that they be from the same collection or simply carefully matched to each other.
There are no special instructions on how to wallpaper an arch. The main thing is to strictly follow general recommendations regarding gluing exactly the type of trellis that you purchased. Usually they are written on each roll. Also a couple useful tips Salespeople from stores that sell wallpaper can tell you how to wallpaper an arch.
To cut off excess trellises when gluing, it is best to use a large breadboard knife, but it is advisable to trim the edges of the panels only after the glue has dried well, since soaked paper can simply tear under the blade, and as a result the work done will look sloppy. It is advisable to protect the ends of the pasted arch with a special flexible plastic profile, otherwise there is a risk that the trellises will quickly fray at the protruding corners. It will not be a bad idea to stock up on wallpaper used for gluing for the future - an extra roll will always come in handy to update a dirty place without re-gluing the entire arch completely.
Framing an arched opening with stone or wooden overlays
In a classic or modern eco-interior, arches from decorative stone, as well as structures decorated with valuable wood species.
The big advantage of decorating with stone is that it can decorate an opening of any shape - from simple rectangular to semicircular and even asymmetrical. With wooden overlays it will be more difficult - not every carpentry workshop has required capacities and equipment for working with bent wood, therefore, if such a master can be found, then his services will cost much more than usual.
To reduce the cost of equipping a stone arch, instead of natural material, you can use artificial material to lay out the opening, which not only looks no worse than the real thing, but also has greater wear resistance.
In both cases, before starting to frame arches and openings, it is necessary to carefully prepare the surface for decoration, leveling it and ensuring maximum symmetry relative to the axis (except for asymmetrical structures), since the decoration will make the initial construction flaws even more noticeable if they are not eliminated in time .
Arch decor using stucco and polyurethane elements
Beautiful arches in an apartment can be made using these decorative elements, like plaster molding, polystyrene foam or polyurethane moldings. But here you should be very careful: such decor for an arch is only suitable if the entire interior of the apartment is designed in styles such as Baroque, Rococo, Biedermeier. Agree, this design option will look very ridiculous if the entire home is decorated, for example, in country style, loft or minimalism.
Already sold in specialized stores finished stucco molding for the arch: rosettes, baguettes, friezes, moldings, which you just need to choose wisely, harmoniously place on the opening area, glue, putty and paint. There is a stereotype that stucco decoration must be white, but this is a complete misconception. Elements can be painted in any color, although the most noble in classic interiors looks like stucco painted in gold, silver or bronze with an antique effect (uneven painting of the surface, creating the illusion of wear).
You can talk about how to refine the arch on several more pages. Best advice in this case, armed with photographs of examples of opening design you like, use your imagination and don’t be afraid to experiment, and then everything will definitely work out.
