Crafts from 1.5 liter plastic bottles. What you can make from plastic bottles with your own hands for your summer cottage, garden and vegetable garden

CRAFTS FROM PLASTIC BOTTLES FOR THE GARDEN (LESSONS WITH PHOTO)

In this material we will share with you . You will learn how to decorate flower beds and make a beautiful one with your own hands. palm tree made from plastic bottles, as well as beautiful animals made from this unnecessary material. Simple and intuitive master classes with photos of the sequence of work stages will help you make amazing plastic crafts for the garden! Passionate . Use some of them:

- bright garden paths that can be made from sea pebbles, multi-colored paving slabs, in the form of paving stones with green grass breaking through between it, made of silvery coarse and small gravel or rounded cuts of wood. Please pay Special attention In addition, diverse paths throughout the garden plot will allow you to divide its total area into interesting thematic zones - garden, vegetable garden, recreation area, children's playground and barbecue;

- solar-powered mini-lanterns are the simplest and most inexpensive decoration option that adds coziness to any garden plot. They will require absolutely no professional installation, unlike other expensive street lighting options. Since they are wire-free, you just need to stick them into the ground or along garden paths, or in flower beds. Also for the garden you can make crafts with your own hands in the form of decorative lanterns from a plastic bottle ;

Beautiful hanging flowerpots, all kinds of flowerpots , designer flower pots can be moved within summer season. Your garden plot will always look new if you make these garden decorations with your own hands. It is best to place the pots in the barbecue area, on the veranda or around the playground. Use old unnecessary boxes, multi-colored plastic bottles, barrels, watering cans and other items that you would never need again and that you wanted to throw away as decorative containers. Give them a second life by decorating your garden with handmade crafts;

Hand-made fences along garden paths look great. It can be woven from willow or hazel. As a rule, people like to hang beautiful old clay jugs and pots on such fences as garden decorations. Planted decorative sunflowers will look great next to such a fence;

Country furniture always creates a unique comfort in any corner of the garden. Plastic bottles can also be used as a material for making garden furniture (in the previous tutorial we told you how to make a durable sofa from large plastic bottles ). Forged benches, chairs with wooden seats and tables are currently the most popular. When choosing furniture, pay attention to the fact that the legs have special tips so that they do not fall into the ground. For summer verandas Wicker furniture made of wicker and rattan is great. Larch and teak are excellent for our latitudes. All unpainted furniture must be pre-coated with special compounds.

Crafts from plastic bottles for the garden will become his real decorations. Avid summer residents spend all their free time in their favorite areas. To make it more original and beautiful, you don’t have to run to the store for newfangled ones. garden figurines or expensive materials. The simplest craft item is a used plastic bottle. To implement your ideas, first read the useful recommendations.

What you need to start making DIY crafts from plastic bottles for garden? You will need - a precious plastic bottle, scissors, plastic paint and wire. The main thing is not to be afraid to use your imagination to make crafts from used plastic bottles for the garden. Can involve children in making such crafts . This can be a fun and exciting family activity.

Crafts from various plastic bottles for the garden are the most budget option, and plastic will last at least 3 years.

Crafts made from a plastic bottle, as you can see on the picture, can be placed on the playground: make a palm tree out of plastic bottles or flowers, put a plastic peacock, hare or other animals.

There are ideas for a variety of crafts made from plastic bottles. This can be seen in the photo - flowers, birds, animals, toys.

PALM TREE FROM PLASTIC BOTTLES WITH YOUR HANDS (MASTER CLASS WITH PHOTO)

Plastic bottles are an excellent material used in home garden crafts. They can be from ordinary water or carbonated drinks. You can also use plastic from detergents and shampoos, giving him a new life. No need to treat it like useless junk. After all, from plastic, from practically nothing, you can make useful and interesting things for the dacha, garden, and toys for children. Below you will find information with which you can use plastic bottles You can easily make a beautiful palm tree with your own hands. If you make 5-8 of these palm trees and decorate your garden with them, then your site will look very advantageous and exotic compared to others!

As we already told you in one of our materials, if you have a huge number of bottles of the same shape and size, it is quite possible to make country furniture . It’s very easy to secure 15-20 1.5-2 liter bottles with tape and thereby get the basis for a pouf. It can then be covered with a beautiful fabric, making a soft foam seat.

A palm tree made from plastic bottles will show off at your summer cottage or in the garden all year round. She will definitely decorate any personal plot.

How make your own palm tree from plastic bottles ? Photo with the stages of work should encourage you to do this (see below Master Class). In order to make your own garden products in the shape of a palm tree, you will need some simple materials. Of course, these are plastic bottles, which are the main material.

For palm trunk from plastic bottles you will need to stock up on 10-15 plastic bottles. Their capacity is one and a half to two liters. Depending on the height of the palm tree, different bottle capacities are taken. With a palm tree height of 15 plastic bottles, two-liter containers should be used. For a height of 10 bottles, one and a half liter bottles are used. You need to take brown ones plastic bottles to make a palm tree trunk out of them.

For the palm tree crown you will need green plastic bottles. The larger the bottle, the longer the palm leaves will be, and the more natural it will look.

To make a plastic palm tree reliable and durable, you need to select either a strong and thick willow rod or a thick metal rod for its base.

Tools needed to make your own palm tree from plastic bottles:

an awl or drill to make holes in the bottles;
large scissors or a well-sharpened knife.

Sequence of actions for manufacturing plastic palm tree:

to make a palm trunk, you first need to cut the bottles Brown 10-15 centimeters in height. The bottom of the bottle with a bottom is best suited for this. The tops can also be used. This is also a good option, because in this case there will be no need to make holes;

when will the necessary plastic blanks be made? , cloves are cut along their edges with scissors or a very sharp knife. They need to be bent a little in order to give the palm bark from plastic bottles a natural and natural texture;

For the crown of a palm tree, green bottles are taken from plastic bottles. They cut off the bottom. On the very first workpiece, you must leave the neck with a lid. It will later serve as a good fastener during the assembly of the entire palm structure. The necks of the remaining blanks must be cut off;

to make leaves from blanks, they must be cut out, but not reaching the edges by about 5 centimeters or more. Next, the leaves need to be secured by screwing the lid;

the next stage is drilling holes to connect all the prepared parts.

Such a hole, which serves as a connection, must also be made in the lid - the fastening of the palm tree crown. Pay special attention to the fact that the size of the connecting hole is directly dependent on the diameter of the base rod. A hot awl or drill will be a good helper in this;

The last stage is collecting the plastic palm tree with your own hands. It is necessary to plant all the brown plastic blanks on a securely fastened rod, and secure the crown on top, which was prepared from green plastic bottles.

The palm is ready. Now think about where to place it in the corner of the garden so that it looks most impressive. But it’s better to make several of these palm trees, install them side by side and plant green spaces around them.

HOW TO MAKE A FLOWER FLOWER FROM PLASTIC BOTTLES FOR A GARDEN OR VEGETABLE GARDEN

What can be made from plastic bottles to decorate the garden? Next, we will look at options with photos on how you can make a decorative flowerbed with your own hands.
Have you ever thought that the garden is a real creative territory? And this is not at all because its diversity consists only of the cultivation of various fruit trees, flowers and shrubs. Your unlimited imagination and ideas picked up from other gardeners and summer residents will transform your garden into an original and unique look.


From plastic bottles you can create useful little things for your dacha and landscape works, including palm trees, flower beds, gazebos, supports for greenhouses and canopies, frames for climbing plants and so on. To do this, you just need to collect a sufficient number of the same type of plastic bottles. Palm trees made from plastic bottles for any garden will become a real decoration.

But what else, besides palm trees, can be made from this waste material for decoration? your garden? A simple option is a gazebo made from plastic bottles. Or rather, the basis of its design. Since the fastening of the gazebo must be rigid, small screws must be used. If you have a design with solid bottles, then they need to be filled with sand so that they are stable. Please note that in case using plastic bottles as frames (the base of a canopy, for example) do not overload the structure and use only light fabric and film.

Summer residents have long been using plastic bottles to grow seedlings and decorate flower beds. They serve as an excellent container for it. A very original idea is to make them outdoor washbasin. Nothing complicated - just hang a plastic bottle upside down with the base cut off, pour water into it. The cap serves as a tap; you only need to turn it a little to let the water flow.

A modernized version of this type of outdoor washbasin is the following - a plastic bottle is hung upside down. Make a small hole in it. To supply water, you need to slightly unscrew the cap and let air inside the container. You can build a real shower in the same way. To do this you will need a plastic bottle with a large diameter. Several holes are made in the bottom of the bottle, like a shower.

Flower beds made from plastic bottles for the garden are quite common among amateur gardeners. They simply dig into the ground, representing a small fence.

In addition, you can make a variety of flowerpots of different sizes and shapes. , depending on the plastic containers used. For example, small bottles can be used for tabletop and hanging pots. Try cutting off the bottom of a bottle and you will immediately get a cylindrical planter . If you use only the top part of a plastic bottle, then you will get a cone-shaped flowerpot . Such pots can be decorated with colored corrugated paper, fabric or tied with yarn. A simple decorative option would be painting with paints. Inverted plastic bottles with a capacity of 5 liters will serve perfectly as decorative flowerpots.

The fantasies of summer residents are irrepressible, and they making palm trees from used plastic bottles for your garden. You can make real beautiful decorative palm trees from brown and green plastic bottles for your garden.

ANIMALS FROM PLASTIC BOTTLES (HOW TO MAKE A HARE OR A PIG WITH YOUR OWN HANDS)

Summer residents love to decorate their garden plots with all kinds of garden figurines made from clay or plaster. To the territory garden plot has become original, it is not at all necessary to go to an expensive store to buy decor. Animals from a plastic bottle, which you can see in the photo, can be easily done and with my own hands. This option for garden decoration is also very practical for a personal plot, because the plastic is resistant to both rain and sunlight.

After reading this manufacturing review, you will learn how to make various animals from an ordinary plastic bottle (see photo with the stages of work). In fact, making a hare or pig from a plastic bottle with your own hands is not at all difficult, and after reading the material, you will be convinced of this!

Plain plastic bottles can serve as a source of inspiration for creating mini-masterpieces, and not just a constant headache for environmentalists. A variety of plastic figurines of animals or birds can be made together with children, using your own and the children’s imagination. All you need for this is a plastic bottle, cardboard, glue, scissors, markers and acrylic paints (you can use spray paint).

To make animal figurines (hare or pig), you can take any plastic bottles you have. Invent interesting ideas and choose which animal you like best. We suggest you make a cute pig from a plastic bottle. In its finished form it is shown in the photo.

First, carefully prepare the plastic bottle for use. The label must be thoroughly removed from it and then washed.
Well, now let's get back to making crafts. . Cut out ears, tail and paws from cardboard. Glue all the cut out parts of the animal to the bottle. Let's take pink paint and paint the resulting blank from a spray can. Let the paint dry. Now the fun begins. After drying, use markers to draw the pig’s eyes, snout and mouth. You can also use another option - pre-cut these parts from colored paper or paint it and then stick it on the bottle.

Sounds funny, but pig made from a regular plastic bottle and showing off in the photo, has become a real, as they now say, fashion trend in Lately. We can say that now a lot of people make such piglets.


It is clear that thanks to different imaginations, different interesting crafts. These can also be cute little piglets made from small bottles. These are real wild boars or sows from huge plastic bottles. Some are trying to copy Piglet. Some people have such a fantasy that they create entire plastic pig farms on their plots.

This, of course, is the topic of all kinds numerous figures made from plastic bottles cannot be exhausted. There are still many types of animals that can be made using a used plastic bottle.

And such an animal can be a hare from an ordinary plastic bottle, which you see in the photo. It can be made for a summer residence different ways. This will depend on the shape of the bottle you take and the very idea of ​​​​a decorative garden hare.

To make using the simplest method hare from an ordinary plastic bottle, as shown in the photo, you will need: plastic bottle, acrylic or spray paint, brush, scissors, hot glue, sand and cardboard.

Note that if you are making this figurine for a child, and not to decorate your garden plot, then take a small plastic bottle. The bunny will turn out cute and very neat. But bulk bottles are great for making garden hares.

Sequence of actions for making a plastic hare:

thoroughly remove the label from the plastic bottle;

Coat the cleaned bottle with spray paint and let it dry;

After drying spray paint fill a plastic bottle with sand. This will give it good stability;

Carefully draw the face and paws of a hare on a plastic bottle;

You need to cut out ears from colored cardboard and carefully paint them with paints and hot glue;

If the hare is intended for the garden, then its ears will also be plastic. They are cut from another prepared plastic bottle. In this case, you can only paint with spray paint. Details are drawn with acrylic paint;

on last stage The ears are glued on with hot glue.

Here is another way to make a beautiful funny hare from a plastic bottle with your own hands. To do this, you will need the simplest things - sand, two used plastic bottles, acrylic primer or acrylic paints, a brush and scissors.

The sequence of making a hare using this method is the same - we thoroughly wash the plastic bottles, clearing them of unnecessary labels. One of the blanks must be filled with sand for stability. From the second plastic bottle we cut out the bunny's ears and bangs. Do not touch the top of the plastic bottle with the cork.

We cover all prepared parts of the garden bunny with acrylic primer. In this case, paint consumption will be less. Let the thoroughly applied primer dry. After the soil has dried, we draw a hare’s shirt, a butterfly and its face on the main plastic bottle. In general, we create his image at your discretion.


As a result of this individual approach and you get such funny and unique bunnies. It would be better to paint the ears with silver paint. The cork is usually painted with gold paint. In the place where the bangs will be, use scissors to create an original fringe. After the paint has completely dried, carefully combine all the prepared parts. Your bunny is ready and waiting to take his place of honor in your garden!

As you can see, making a flower bed, palm tree or any animals from plastic bottles is not at all difficult! Fantasize yourself, don’t be afraid of anything, take and rework existing ideas, engage in real creativity , and then yours will acquire its own unique look!

Below is a video tutorial on making a hare from plastic bottles:

NEXT ARTICLE.

It would seem that a plastic bottle is such an ordinary thing, but once upon a time it was worth its weight in gold - our grandparents carefully stacked the precious container on the balcony to use instead of a milk can or a jar for storing compote. Nowadays PVC bottles are a dime a dozen, so humanity has become thoughtful, because soon, due to plastic containers, there will be nowhere to step. How to use all this abundance of plastic for good? The most amazing ideas using the costs of the food and chemical industries - these are floating islands and huge installations, residential buildings and energy-saving systems created from a lot of unnecessary plastic containers. We invite you to join the global plastic bottle boom. Evaluate the original garden crafts from waste packaging that we offer you as an ideological basis for further creativity on the path to creating an amazing and unusual country house design.

The burning problem of all summer residents is the construction of a house and auxiliary buildings on a garden plot in conditions of a small land plot and limited funds. In addition, the seasonal purpose of the dacha does not imply the construction of permanent structures “for centuries”.

So, enterprising people decided to use a prosaic plastic bottle as a building material. The walls of houses, gazebos, greenhouses, and other garden structures are laid out traditionally - in a checkerboard pattern using cement mortar, only instead of bricks, unnecessary plastic containers filled with sand are used.

To support this not entirely familiar eco-style, you can make a variety of crafts from bottles for the garden so that the design of the site is decided in a single key. Let's look in detail at how you can make your life simpler and more comfortable with the help of PVC containers.

Country house

Despite the apparent simplicity of building a building from plastic containers, there are some nuances that you need to take into account if you decide to build a country house with your own hands. Here are a couple of useful tips:

• Place a reinforcing mesh between the rows of masonry - the adhesion of the solution to the surface of the bottle will improve.
• Do not forget that plastic does not come into contact with cement like brick, so make small holes in the container - this way the solution will begin to interact with the sand inside the bottle and the wall will become stronger.
• During masonry work, secure the bottles with rope or wire so that the rows do not move apart.

Please note that plastic tends to deteriorate under the influence of frost and heat, especially from temperature changes, so be prepared that after some time - 5-10 years, the walls of the building will begin the “countdown”.

Using PVC bottles as a building material, you can build an economical house in the country

The cylindrical shape of plastic bottles allows you to build houses and gazebos that are round in plan

In addition to the supporting structure of a house made of plastic containers, this universal building material, as it turns out, can be used for roofing work. We offer you two options for roofing from used PVC containers:

1. Plastic tiles. To make this simple roofing covering, you need to compress plastic bottles. If this process is carried out without slightly heating the plastic, the container will simply crack, so the easiest way is to lay the raw material out in the sun and then flatten the containers. Installation of PVC modules is carried out using ordinary self-tapping screws to the frame with laying of the material in several layers. From such tiles you can easily form a cone-shaped roof for a gazebo or bathhouse.
2. Plastic slate. From the cylindrical part of a plastic bottle it is quite easy to make something like a slate covering for a roof. To do this, you need to cut off the bottom and neck of the container, cut the middle part of the container lengthwise and in half, and connect the resulting PVC elements with glue, forming a wavy surface.

If you decide to build a house from wood, brick, or there is already a residential building on your summer cottage, pick up a plastic bottle and show your imagination - decorate the facade with unusual decor from plastic corks. Complex geometric patterns, floral patterns or slightly naive “cartoon” animals - choose any style that suits your spirit.

It is quite possible to make a roof for a summer house from plastic bottles - either in the form of tiles or like slate

Bright plastic lids from used containers will give the façade country house expressive color

Decor made from bottle caps for the facade of a country house will give the building individuality

Gazebos, greenhouses, pergolas

The most rational use of plastic bottles for the garden is not only crafts designed to decorate it, but also more significant things, for example, greenhouses or. Why buy expensive polycarbonate to build a greenhouse if the PVC from which the containers are made is practically the same material?

Why equip a greenhouse with glass that is even more expensive than laminated plastic if there are unnecessary bottles? By refracting the sun's rays, PVC containers perform the same tasks as glass and polycarbonate, moreover, this is the most economical option for building a greenhouse that you can find.

An economical option for arranging a gazebo or greenhouse in the country - building from plastic bottles

If you are bored with the traditional rectangular gazebo, make it in the form of a hemisphere using a metal frame and plastic bottles

Having built a frame of wood or metal, arm yourself with a hot knitting needle, drill or hammer with nails. One way is to make holes in the bottom and cap of a plastic bottle and place the plastic containers on a fishing line or wire, the length of which will be slightly greater than the height of the building. Stretch the resulting elements and secure them to the cross members of the frame - this way you will form the walls of a greenhouse or gazebo. Additionally, you can fix the vertical modules in the transverse direction by tying the bottles within one row with wire. Using containers of different colors, try to create some kind of ornament - this way you will diversify the colorless mass of walls made of transparent plastic.

What else can you build from plastic bottles for your garden? The most easily erected version of a small architectural form made from plastic bottles in the garden is a lightweight gazebo, which usually serves as a frame for climbing plants. However, despite the fact that in spring and summer the pergola structure will be hidden by climbing roses or ivy, in winter its frame will be exposed and will not look very good. To avoid this phenomenon, you can decorate the pergola structure with plastic bottles natural shade– brown or green. The brownish colors of PVC vaguely resemble wood, while the grassy colors will enliven the appearance of the garden in the cold season.

Fences, railings, gates

You can save a lot of money if you use plastic bottles to fence your garden plot. Using the same principle that was described in the construction of the gazebo, instead of corrugated sheeting, chain-link mesh or polycarbonate, use plastic containers to fill the space between the fence posts.

With a little creativity and diligence, the border of your garden will become not only impassable, but also extravagant and eye-catching. If the fence has already been erected earlier, floral decor made from plastic bottles will give it a new sound - the most natural option for the garden.

To support country houses made of plastic bottles, build a fence using the same containers for the integrity of the landscape design

Multi-colored flowers cut from plastic bottles will refresh and decorate old fence or country house

Carport

The eternal problem of car owners is the allocation of space for plot of land for parking a car or several Vehicle- bicycles, scooters or ATVs. The design of a compact private or country house does not always include space for a car, so there is a need to build a separate garage or shed. The construction of these structures is expensive and beyond the means of many, so the car sits under the scorching sun, exposed to the winds, rain and snow. Ordinary plastic bottles come to the rescue in this situation - waste, useless containers that allow you to experiment without fear, without fear of spoiling the building material. If something doesn’t work out and the bottle becomes unusable, you can always take another one and not lose a penny.

Material about parking options for a car in the country will also be useful:

A carport made from plastic bottles will not only fulfill its immediate function, but will also add an original accent to the country landscape

So, from plastic bottles you can form a plastic structure, unusual in its configuration and performing several functions at once - it will create a protective plane from precipitation and sun and, at the same time, decorate your garden. There is nothing complicated about forming a canopy from bottles - it can easily be made with your own hands.

First, in plastic containers you need to do through holes, more precisely, it is best to burn them with a hot rod, and then put the bottles on fishing line, rope or wire, connecting them in rows. Sequences of bottles are fastened together by perpendicular connections through another pair of holes and the previously selected material for “firmware”. Thus, a movable surface is obtained, reminiscent of “bottle fabric”, which remains to be attached to a metal or wooden frame using hangers of different lengths to create a wave-like effect.

It is important to know! Considering that a plastic bottle is a kind of lens that refracts light in the same way as glass, it is advisable to paint the bottom of the container to block direct sunlight.

Useful devices for the garden

solar collector

You've probably encountered the fact that your dacha doesn't have a central water supply, you didn't have time to get a boiler, and after a hard day tending to the garden you really want to take a wash instead of an ice-cold shower warm water. We invite you to try making it for your site Summer shower with energy saving system – solar collector from PVC bottles. The principle of operation of such water heating is based on the so-called “thermosiphon” - more dense hot water moves up, less dense cold - down. The developer of the system, a Brazilian engineer who received a patent for the invention, claims that 1 m 2 solar panel will be enough for 1 person to bathe.

You can assemble a solar panel from plastic bottles and forget about ice-cold water in a summer shower

Cold water entering the solar collector from the tank returns back already heated

Consumables and tools for making a collector from plastic bottles:

1. 2-liter plastic bottles – 60 pcs.;
2. 1-liter milk cartons – 50 pcs.;
3. PVC pipe 100 mm - 70 cm;
4. PVC pipe 20 mm - 11.7 m;
5. PVC corner 20 mm – 4 pcs.;
6. Tee 20 mm PVC – 20 pcs.;
7. Plugs 20 mm PVC – 2 pcs.;
8. PVC glue;
9. Matte black paint;
10. Brush;
11. Emery;
12. Scotch;
13. Rubber hammer, wood jigsaw.

Plastic bottles need to cut off the bottom and insert one into the other. 100 mm PVC pipes are used to form the rectangular frame of the solar panel, 20 mm pipes are cut into sections of 10x1 m and 20x8.5 cm and assembled into a single structure using tees. Black paint is applied to meter-long sections of pipe and milk cartons, which are placed under bottles to improve heat absorption.

Solar panels made from plastic bottles should be located at least 30 cm below storage tank with water on the south side of the wall or roof. To optimize heat absorption, the panels should be installed at an angle, which is calculated as follows: add 10° to your latitude. It is recommended to replace plastic bottles in panels with new ones every 5 years, since after some time the plastic becomes opaque, and this reduces its thermal conductivity.

Another energy-saving idea came to us from hot Brazil called “1 liter of light”. The essence of this engineering idea in terms of how to illuminate a room without windows on a sunny day is striking in its simplicity - you just need to hermetically integrate a plastic bottle into the roof - not empty, but with water. It is water, refracting the rays of the sun, that will fill a room without natural light with bright light.

By filling a plastic bottle with water and sticking it into the roof of your house, you will always have a bright source of light in rooms without natural light.

Growing and watering plants

Plastic bottles will be useful in the garden not only for buildings or decoration, but also directly in growing plants, flowers and vegetables. By cutting a hole in the container and filling it with soil, you can use a plastic container to grow seedlings. Just remember to drill holes in your newly made pots for drainage and take care to drain the water.

Glue corks to a plastic bottle - you will get funny little people instead of boring pots for growing seedlings

Containers for growing plants can be given a little color by painting them with stained glass paints or decorating them with bottle caps. If your dacha is small in area, try creating vertical gardening - hang plastic pots from bottles on a fishing line under the wall. This way you will decorate a dull, featureless surface and save space.

To create pots for seedlings and flowers, not only plastic drink bottles are suitable, but also multi-colored containers left over after use household chemicals

Make multiple holes in a plastic bottle - this will allow you to get a drip irrigation device at your dacha

PVC bottles can also serve you well when watering your garden; if you poke miniature holes in the bottom of the bottle and attach the container to a hose, you'll have a nice drip irrigation tool. By equipping a homemade water sprayer from a bottle with wheels from an old children's car or stroller, you can move the watering machine around the garden.

Furniture for garden and home

A lot of trouble for summer residents is caused by caring for furniture in the garden house and on the street - constant proximity to the ground negatively affects appearance sofas, beds and armchairs. Having built country furniture from plastic bottles, you will forget about what sloppy upholstery is, which is so difficult to put in order outside the city, far from service centers and dry cleaners. The containers and corks themselves are a unique material for making furniture with your own hands - durable and easy to care for.

From plastic bottles you can assemble quite practical furniture for the garden and home.

Chairs and a table for a summer house made of plastic corks are economical solution for outdoor furniture

A comfortable ottoman for the cottage will be made from unnecessary plastic containers, wrapped in foam rubber and covered with upholstery fabric.

A couple of dozen plastic bottles, a metal frame - and comfortable armchair for the garden and cottage in front of you

Garden lamps

Lighting fixtures for a garden plot are another expense column that gardeners often ignore. With a plastic bottle, the lighting problem is solved in a minute. Take a colored canister of household chemicals, cut off the neck and tuck a socket with a light bulb inside - the lamp for the dacha is ready. Create a more complex lampshade configuration by deforming plastic bottles by heating, melting the edges and painting them in different colors. Original lamps made from PVC containers will perfectly replace industrial analogues, and will also decorate your home and garden.

To create original design lamps for the dacha, it is enough to paint them with stained glass paints or slightly deform them

Plastic bottles can make unusual things Street lights for dachas - both electric lamps and candles serve as the light source

Landscape decor from plastic bottles

When creating garden decorations from plastic bottles, everything is used - the entire container, the bottom and neck, the middle part and cut out fragments, and the corks are especially popular. They make very expressive decor for the garden - paths and decoration of empty areas of the house or fence. Another unforgettable decoration of the site can be installations made of PVC containers - three-dimensional and planar figures of animals and plants. Flowerbeds and borders that limit the planting of different types of flowers can be successfully made from the same plastic containers. And so that your ears are always delighted by the singing of birds, hang feeders and water bowls for birds on the trees, made with your own hands from PVC bottles.

Multi-colored plastic bottle caps serve as an excellent material for creating planar compositions in a country landscape.

Examples of flower beds

Without a doubt, the main decoration of a summer cottage is flowers, formed into flower beds or growing in a picturesque disorder. A special “edge” is given to the flower bed by low borders that outline its shape and give flower arrangement completeness.

In the absence of stone or brick, traditionally used to form a border, bury plastic bottles with the neck down along the border of the flowerbed - you will get a simple fence for planting flowers. A good solution for shady areas of a garden plot where nothing wants to grow is original flower beds made from PVC containers of various shapes and colors.

Use a flower bed made from plastic bottles to create shady or wetlands in your garden.

A small flowerbed in the form ladybug looks bright and unusual

Green plastic bottles are perfect for creating a border for a flower bed.

Garden paths

The issue of laying garden paths is always difficult - both the soil needs to be strengthened and decorative material buy - as a result, a considerable amount is obtained. And I don’t want to walk through the mud. While you are accumulating money and looking at the covering for the paths, we offer you a temporary option for arranging them with minimal costs. Fill the paths in the country with a thin layer of cement mortar and immerse plastic bottle caps in it - due to the corrugation along the side plane, they will be well fixed in the building mixture.

A prosaic cement path can be transformed into a picturesque mural thanks to multi-colored plastic covers

Decorative installations

A fairly popular direction in decorating a garden landscape is the creation of three-dimensional installations from various available materials, including plastic containers. However, here you need a lot of skill and patience, because you need to lay out either whole containers or parts cut out of them according to a certain pattern.

The most expressive decor for a garden landscape - voluminous installations made from plastic bottles

We suggest you make a not very complicated installation from plastic bottles in the form of a New Year tree at your dacha. Although New Year still far away, as they say, prepare your sleigh in the summer - think in advance about. Of course, the Christmas tree is the main attribute of the winter holiday, without which it is impossible to create a truly upbeat New Year's atmosphere. What if there are no coniferous trees on your site, and you do not welcome traditional logging on the eve of the New Year? An excellent solution in its simplicity and environmental friendliness is to create a Christmas tree from plastic bottles.

The basis of such a composition is a rigid rod from which bottles can be hung or put on a wire and twisted, tiers can be created from circles, auxiliary supports can be tied or installed and a tent-shaped tree can be formed.

It is not necessary to make a Christmas tree from plastic bottles of a standard green color - it can be assembled from containers in any shade

Whole plastic bottles, bottoms, and cut container parts will be used. The bottles themselves can be deformed, melted, painted in unusual colors - in general, there is room for imagination and ingenuity to run wild. Don't discount bottle caps either - they will make unusual garlands and miniature decor.

By the way, the tree does not have to be hidden or dismantled for the summer season - if you choose a cone-shaped tree, then the internal space of the structure will serve you on hot days as a gazebo or become a place for children to play. You can make a miniature Christmas tree for your home from used green Sprite bottles; you just need to cut the curved planes of plastic containers into “noodles” and stick them on the base.

Bird feeders and nests

One of the types garden decor, combining many functions - feeders, nests and drinking bowls for birds. A feeder made with love will decorate the garden and attract birds - they will repay you for your kindness with cheerful chirping, at the same time destroying garden pests.

Create nests, water bowls and bird feeders from plastic bottles and paint them in natural colors

Bird nests and feeders will become useful decorations for your garden

Decor for country interior

In addition to garden decor, a plastic bottle is good for creating an extravagant interior design for a country house. Bright panels for walls and furniture, partitions and screens, even curtains - you can easily make all this yourself from PVC containers. Such home decorations look quite distinctive and original, at least you will not see anything similar from anyone else. By putting your soul into decorating a country house, you will enjoy both the creative process and the results of your imagination combined with skill.

By cutting the bottoms of transparent plastic bottles and connecting them with thin wire, you will get air screens to divide the space of a country house

Rainbow curtain for front door assembled from ordinary bottle caps, but looks very original

They will help you paint the interior of your country house in all shades of the rainbow. plastic caps from bottles

Entertainment, relaxation, games in the country

Playgrounds

Playgrounds on a plot of land - not only nice thing for organizing leisure time, it is also a certain element of garden decor. Bright swings and slides, mini-golf courses and fairy-tale houses will create a pleasant atmosphere for your child to stay at the dacha.

Plastic bottles will help to separate the area for children's games, and will also serve as a base for creating interesting toys.

Set up a croquet field at your dacha and make a gate out of plastic bottles

Boats and watercraft

Surely there is a river flowing nearby your garden plot or there is a lake. If so, then your vacation on the shore of a reservoir will become more exciting if you have a means of transportation on the water. Getting to a deserted island, going on a boat trip or fishing - nothing is easier when you have a boat. You can easily build this simple transport from plastic bottles.

A narrow boat like an Indian pirogue with a capacity of 1-2 people or a larger boat for 3-4 passengers - there are a lot of options. The simplest watercraft is a rectangular raft, from which it is convenient to fish by sailing a little from the shore.

Plastic bottles will make a boat or raft that is quite stable on the water.

To make a boat in the form of a kayak, cut off the bottom of the bottles, thread one into the other one after another and form something like long tubes. Glue the joints with furniture tape - it is wide and will not come off when in contact with water. From separate tubes, connecting them together, glue the sides and bottom of the boat with the same tape to get a wedge-shaped shape. Here it is important to correctly calculate the ratio of the width of the vessel and its height - trial launches and a little engineering will help you to turn the mountain unnecessary packaging into a useful thing.

A non-trivial approach to decorating a pond at the dacha - delicate daisies from bottles on the surface of the water

A boat for the whole family has a more complex design, which involves connecting vertically standing bottles in two rows and additionally sealing the hull of the boat with bags. There is nothing stopping you from installing a motor on the boat, which will significantly improve its performance and range. So, using the unsinkable properties of plastic bottles, from which, by the way, entire islands are built in Japan and Taiwan, you can surf the surrounding waters with breeze and comfort.

Haven't you bought into the idea of ​​a plastic boom yet? Do something unusual for your garden and before you know it, you will immediately join the ranks of plastic bottle admirers.

A plastic bottle is an inconspicuous thing in everyday life. Once upon a time, it was valued in everyday life - the older generation stored scarce containers in reserve, and then used them for going out for milk or storing compote. Times have changed, there are a lot of PVC bottles, people don’t have time to throw them away. And many have already seriously thought about what to do with such a lot of unnecessary containers - after all, as you know, plastic takes about 100 years to decompose.

Little by little, they began to be used. Almost everyone has a bird feeder made from a plastic bottle on their balcony or a transparent homemade “lampshade” in their garage. Many ideas have arisen for reusing unnecessary containers. People have adapted to making any crafts from plastic bottles - both purely practical and purely decorative.

Thrifty gardeners

A common problem for many summer residents is the construction of a house and outbuildings on a small garden plot with limited funds. Moreover, the seasonal operation of such a house does not require the construction of serious capital buildings. Enterprising gardeners solved the problem with typical Russian ingenuity - they took the most a regular bottle PVC and looked at it as an original, affordable, easy to process and practically free building material.

What can be done for the garden from plastic bottles - these, at first glance, useless containers! Real walls of houses, greenhouses, and gazebos are being erected. The masonry technology is quite traditional - using cement mortar. But the brick is replaced by a plastic bottle filled with sand. The result is an original building in an unusual style.

Country house

Although there is nothing complicated in its construction from PVC containers, some nuances still need to be taken into account. It is better to lay the rows of masonry with wire reinforcing mesh to improve the adhesion of the solution to the smooth plastic of the bottle. For the same purpose, make small holes in the container - the solution will come into contact with the sand inside, which will increase the strength of the masonry.

During the work, be sure to secure the bottles with wire or rope, otherwise the rows will move apart. Do not forget that plastic does not tolerate heat and frost well, and in five years the house will have to be restored. However, taking into account the availability of material and the ease of construction, such an economical house can be “updated” more often.

The cylindrical shape encourages the construction of round houses and gazebos. You can also make a roof from them. How? Here are two interesting ideas.

Plastic tiles

Expensive tiles can be replaced with homemade ones, made with your own hands from plastic bottles.

A large number of them should be carefully compressed. If you do this without heating, the container will simply crack. Place the bottles in the sun, then flatten them.

The resulting PVC modules are attached to the frame in several layers with self-tapping screws. A roof made of such tiles can be of absolutely any shape, including cone-shaped - for example, for a bathhouse or gazebo.

Plastic slate

Another option for a product made from plastic bottles for a homemade roof is slate sheet.

Cut off the neck and bottom of the container. We cut the remaining cylindrical part of the bottle in half lengthwise, and connect the resulting semicircular elements with PVC glue into a wave-shaped surface.

An existing building (or one being built from brick, wood, etc.) can be decorated along the façade with original decor made from PVC bottle caps. Having them in large quantities, it is easy to come up with a floral pattern, a geometric pattern or a “cartoon” design.

Gazebos and greenhouses

A greenhouse made from plastic bottles is one of the most rational decisions. Traditional polycarbonate is quite expensive, but in essence it is the same material. Transparent bottles are quite capable of refracting sunlight and perform the same tasks as laminated plastic or glass.

In addition, if you are bored with the traditional rectangular shape, a greenhouse made of plastic bottles can be made in the form of a hemisphere using a metal frame. Having built it, take a drill, a hammer with nails or a hot knitting needle and make holes in the bottoms of the bottles. Then string the plastic vessels onto a wire or fishing line slightly longer than the planned height of the building.

Stretch the resulting “garlands” and attach them to the frame - you get walls. For stability, you can fix the bottles in the transverse direction by tying each row with wire. If you take multi-colored containers, you will get an original ornament.

Gates, fences and fences

What else useful can you make from plastic bottles for your garden?

You will save a lot of money by using them to fence your area. The principle of use is the same. Fill the space between the posts with plastic containers. A little creativity - and an extravagant border will not only protect, but also decorate your property.

And flowers from plastic bottles of different shades will add originality to such a fence.

Carport

A common problem is the lack of space on the site to park a car. Building a full-fledged garage is time-consuming and expensive, and the car often remains exposed to the scorching sun, rain and winds for days on end.

The same plastic bottles will help preserve your iron friend. You can experiment with them endlessly, replacing damaged ones with new ones. A carport made from them is not only functional, but also adds originality to the landscape.

Such a canopy is made in a similar way to a greenhouse. Bottles with pierced holes are strung on wire and secured in rows. Then a couple more holes are made in them (on the sides) and a transverse “firmware” is pulled through them. As a result, we have a flexible and movable “bottle fabric” of the size we need, which remains to be fixed on the frame.

solar collector

Products made from plastic bottles can be complex designs using engineering and technical thought.

If you are not at the dacha central water supply and a boiler, but at the end of a hard day you want to wash yourself with warm rather than ice-cold water, we suggest making a summer shower with a solar collector from the same bottles. The principle of its operation is that hot (more dense) water moves upward, and cold (less dense) water moves downward. One is enough for 1 person to bathe square meter such a solar panel.

Cold water from the tank flows into the panel, assembled from plastic bottles, and comes back already warmed up. It will take about 60 two liter bottles, pipes, tees and PVC corner, black paint.

The bottoms of the bottles are cut off and inserted one into the other. The frame is assembled from PVC pipes Using tees, plastic, painted black, is placed under the bottles to increase heat absorption. You can take milk cartons.

Bottle panels are located on the south side of the roof below the water tank. It is advisable to replace them every few years, as the plastic becomes opaque and loses its desired properties.

Another energy-saving idea is to illuminate a windowless room on a bright sunny day. To do this, it is enough to hermetically insert a plastic bottle of water into the roof, which refracts the sun's rays and illuminates the room.

Watering plants

From buildings we move on to growing vegetables and flowers. And here products made from plastic bottles will serve us. It is convenient to grow seedlings in our favorite container by cutting a hole and filling it with soil. At the same time, do not forget about drainage. Containers for plants can be painted with stained glass paints or covered with corks.

For small plot sizes, vertical gardening can be organized. Plastic containers are hung on a fishing line along the wall. You will immediately save space and decorate an expressionless surface.

By making many pinholes in the bottle, you will get a drip irrigation device. You can also pierce miniature holes in its bottom and attach the bottle to the hose - the tool is ready. And if you install such a homemade water sprayer on a platform with wheels from an old one toy car(or a frame from a baby stroller), you can move it around the entire territory. In this case drip irrigation from a plastic bottle will make the life of an inventive gardener much easier.

Garden and country furniture

Furniture items transported to the dacha quickly lose their appearance due to constant dampness. You can avoid problems by making practical and easy-to-clean furniture from plastic bottles with your own hands.

The table and chairs are easy to make and do not require special skill. A round or square ottoman can be made from bottles placed close to each other, wrapped in a sheet of foam rubber and covered with inexpensive, practical fabric. The chair is made according to the same principle, but using a metal frame.

Garden lamps

You can also save money on lighting fixtures for the garden. We take a colored plastic canister, cut off the neck, and insert a light bulb in the socket inside. The lamp is ready!

A more complex design is created by heating and deforming bottle plastic, melting the edges and painting. Such original lamps They will serve as an excellent replacement for factory ones and will decorate both the house and the site. Moreover, candles, including decorative ones, can also serve as a source of light.

Landscape decor

Making garden decorations, they use everything - whole bottles, separately the neck, bottom and middle part, as well as cut out parts. A special issue is traffic jams. The decor for the garden comes out original and expressive - paths, walls of the house and the plane of the fence.

The decorations in the form of three-dimensional or flat figurines of animals or plants that imitate real ones are stunning with their originality. And the feeder made from a plastic bottle is simply a classic of the genre.

Flowerbeds can be divided with multi-colored paths made from them; such a “cut” will give the flower garden completeness. Bury small bottles, neck down, along the contour of the flower bed. Choose them in the same or contrasting colors. Birds from plastic bottles can both feed and drink. Do you want to constantly enjoy the chirping of birds? Hang drinking bowls and feeders cut out from the same container and painted on the trees.

Garden sculptures made from a variety of materials are now extremely popular. A milky-white swan made from plastic bottles with a gracefully curved neck can be not only a decoration, but also a mini-flower bed. Between its wings there is sometimes a real flower garden. Several of these flowerbed islands will miraculously transform any garden. And such a swan is made from plastic bottles quite quickly and simply. Moreover, if you don’t have opaque white plastic at hand, acrylic paints will come to the rescue.

It’s a little more difficult to make a peacock from plastic bottles. Here you will have to tinker, cutting the lush fringe for the tail. But the result is worth it. A peacock made from plastic bottles can become a real work of art; there is no shame in placing such a sculpture in the most visible place.

Garden paths

Laying them is always a difficult and quite costly issue. A temporary solution would be to fill the paths on the site cement mortar(in a thin layer) and immerse the plastic caps tightly to each other. You can lay out a variety of ornaments and even inscriptions.

Outdoor washbasin

We hang a bottle with the bottom cut off, filled with water, with the cork down on a pole or tree. If you need to wash your hands, unscrew the lid slightly and the water begins to flow.

Another option is to hang the whole bottle with the cork up, and make holes in the bottom. You twist the cap slightly, air gets in, and water flows out.

An outdoor shower works on the same principle, only the container will need a much larger size.

Volumetric sculptures

Creating decorative installations is a fashionable trend in garden and landscape design today. What kind of things are these sculptures made from? And plastic bottles are no exception.

This kind of work will require a lot of patience and some skill. To begin with, you can try to make a New Year tree from bottles - according to the “sleigh in summer” principle. If you come to celebrate the New Year at your dacha, but there are no coniferous forests nearby, a plastic Christmas tree will come in very handy.

The basis of the design will be a rigid rod: bottles are either simply hung from it, or put on a wire and wrapped in a garland in several tiers. With the help of auxiliary supports, the tree can be shaped into a tent. Moreover, the Christmas tree does not have to be a classic green color - a variety of bottles are suitable. They can be cut, melted, deformed, cut into thin strips, imitating fluffy pine needles, and also painted in the most unusual colors.

Decorative garlands and miniature ornaments will come out of the lids. And the tree itself does not have to be disassembled for the summer - having a cone-shaped shape and a solid size, it will serve as a gazebo for children to play with.

A miniature Christmas tree will be made from green Sprite bottles. It is enough to cut their curved walls into “noodles” and stick them on the base frame.

Country interior

The interior decor of a country house can be diversified with the same bottles. What can you come up with here? Yes, anything! Screens, partitions, decorative panels and even curtains - products made from plastic bottles exist in a lot of options. You will enjoy the results of your own creative work and acquire an exclusive item that no one else has.

Airy screens dividing space are made by cutting off transparent bottle bottoms, connecting them into garlands with fishing line or wire, and hanging them in the opening. A multi-colored curtain with an original pattern is assembled from the same lids.

Playground at the dacha

Bright fences made of bottles will help separate the area for children's games. It is possible to designate mini-golf courses, build sandboxes, swings and even fairy-tale houses. You can make a football goal or a labyrinth for kids.

If there is a body of water near the garden plot, relaxation on the shore can be greatly diversified. It is enough to make at least the simplest watercraft. Getting to a deserted island, going fishing, or just taking a ride along the shore - all this will be possible thanks to the same universal, irreplaceable PVC bottles!

Bottle boat

You can limit yourself to a small narrow boat like an Indian pirogue, which can accommodate one or two. Or you can “swing” at a serious boat for three or four passengers. The easiest thing to make is a rectangular raft; you can fish from it not far from the shore. It will turn out to be quite stable and reliable.

If you are planning a boat in the shape of a kayak, insert bottles with the bottom cut off one into the other, you will get something like a long pipe. Reinforce the joints with wide furniture tape that is water-resistant. Assemble the bottom and sides from separate pipes using the same tape, and give the structure a wedge-shaped shape. In this case, it is necessary to observe the ratio of the width and height of the vessel.

The design is more complicated - a boat. Bottles standing vertically are connected in two rows and the bodies are sealed with bags. You can even install a small motor on such a boat.

Palm tree from a plastic bottle

All trees and shrubs made of plastic are made according to the same principle. You will need the bottles themselves, wire, scissors, and paint for plastic. For palm trees, their middle and lower parts in dark shades are suitable. From the others - greenish ones - we will make foliage.

The bottom of each bottle is cut off, another of the same type is inserted into it, and continued to the desired height. A wire is pulled inside the center. The neck of a green bottle without a bottom is attached to the top. Then you need to cut a lot of "fringe" from green plastic strips and glue them with lush branches hanging down.

It is better if the palm tree made from a plastic bottle does not stand alone in the garden. An island of them will become an original decoration of any garden in winter and summer. Plastic is a fairly resistant material to cold and rain. For safety reasons, do not forget to melt the edges of the bottles.

Children will take part in such work with great interest. This is a great way to keep kids busy and give them the opportunity to show their efforts and imagination.

Butterfly for garden decor

Variegated butterflies are an original decoration for any cottage, for example, garden gazebo. To do this, cut out the middle of a bottle of any color. Then we prepare a cardboard pattern in the shape of butterfly wings. We cut out the plastic according to the attached template, and attach the wire to the fold line.

We decorate a homemade butterfly with any beads and paint the wings acrylic paints. The color palette should be chosen to match the gazebo.

Small butterflies from bottles can serve as original hair clips; you can also pin them on curtains or magnetize them to the refrigerator. The smallest crafts made from plastic bottles are bracelets and other original pieces of jewelry.

Vases made from plastic bottles

They come in both tabletop and hanging. From one bottle, cut in half along the height, you can get a cylindrical pot (from the lower part) and a cone-shaped flower pot from the upper part.

You can decorate vases from plastic bottles with anything - fabric, yarn, corrugated paper, etc. By slightly heating the plastic, it is given a wide variety of shapes. It is easy to give the edge a fancy shape using hot, sharp scissors.

Plastic daisy

It is very easy to make from a white bottle or regular transparent white paint. Prepare more containers, let the flowers be large and expressive, with petals as long as the height of the bottle.

To maintain the even and beautiful shape of our flower, it is better to make a paper pattern in the form of a circle of small diameter with petals. We give the petals a rounded shape, and pierce a hole in the center of the workpiece with an awl. A beautiful bend of the petals can be achieved by heating them with a candle flame.

We make the core from a yellow bottle or painted transparent. Cut out the petals and sepals from the green one and add the required form heating. We connect all elements with wire. In the same way, any flowers are created from plastic bottles, but you will need containers of different shades or paints.

Animals made of plastic

Making them is easier than it seems. For example, the torso plastic pig It’s easy to make from a five-liter canister. The animal's ears and legs are cut out from ordinary small bottles. After all work is completed, the structure is painted with bright pink acrylic and installed in a visible place.

A rattle for a baby, as well as a piggy bank, is made like this - the top parts of six one and a half or two liter bottles are cut off evenly so that, by combining them, you get the right ball. They stick together. The necks can be varied with stoppers of different colors.

The item can be used as a piggy bank, or as a rattle. Place buttons or beads inside, screw the lids tightly, after lubricating the threads with glue - so that the baby does not take them apart.

Cars and other toys

Kindergarteners can also handle these crafts. We place bottles of any size horizontally, glue the legs, ears, and tail. Eyes and mouth can be drawn or made from paper. If you have to make not a little animal, but a car, then the wheels will be the same corks or cardboard circles.

Birds made from plastic bottles are a little more complicated to create; here you will need to cut out and glue the “wings”. But the effect can be wonderful, especially if you work hard on the “feathers”.

And dolls made from plastic bottles are simply wonderful! The face is drawn or pasted on, hair is made from thread, clothes are any unnecessary scrap of fabric.

Bottle slippers

They will come in handy in rainy weather in the garden and will help protect your shoes from dirt. Take a couple of identical bottles, small for a baby, larger for an adult. We get closed-toe shoes by cutting off the middle part and bottom in half, flip-flops by cutting one bottle lengthwise and securing a plastic strip on top with glue or thread.

Broom made from a plastic bottle

Excellent and very useful thing! How to make it? We cut several bottles into small strips and fix them on a wooden or metal holder. A durable and tough broom for cleaning the yard is ready!

In addition to it, you can make a scoop in the same design - cut off the bottom and half of the side to the middle of another bottle, and attach it to the handle.

We hope that now you will agree: plastic containers are a wonderful material for making a huge variety of useful and decorative crafts. Get creative. And good luck to you!

The trend of rational use of household waste has recently become increasingly popular, especially with regard to plastic containers. You can make almost everything from plastic bottles with your own hands. country house interior and not only. One of the main advantages of this material is long term service, and it is also very elastic. Don't forget that plastic bottles are... available material, which is always available to every owner or hostess.

Cheap and cheerful - we make flower beds from bottles

Plastic containers are an ideal option because they have big advantage before wood and even metal. Wooden fencing in flower beds or flower beds, it dries out over time or rots under the influence of moisture and sun. Even metal curbs are susceptible to corrosion and require periodic maintenance, such as regular painting.

What about plastic? It does not lose its shape and does not collapse for a long time. This means that such a flower bed will last for more than one season or even one year, and it also requires absolutely no maintenance. Even if a “breakdown” occurs, the required “element” can always be found in the pantry and easily replaced, without resorting to long, tedious shopping trips to find a suitable fragment.

So, what can you make from plastic bottles with your own hands?

Bottle borders

If you need to fence a flower garden, plastic containers of different sizes will do the job perfectly. This will not only limit space and prevent growth perennial plants, but will still retain moisture and prevent the appearance of weeds.

The shape and size of the flowerbed depend only on the imagination of the summer resident: it can be either equilateral or in the form of some kind of animal or plant. You can also use bottles to break the flowerbed itself into segments.

Even a child can build a bottle border (with the help of adults, of course):

1. The first step is to draw the contours of the flower bed with a sharp object or sprinkle sand on the site.
2. Remove the labels from the bottles, wash them, pour sand into them and screw on the cap. If this is not available, you can use ordinary soil or water. This is necessary for stability, since empty containers will quickly fall out of the fence.
3. Dig a groove along the outlined contour so that the bottle can be deepened into it by about 1/3.
4. Place the filled bottles in the groove with the neck down, as close to each other as possible, and cover with soil.

For visual effect, you can use bottles made of different colored plastic (green, white, brown).

Some summer residents do without digging in bottles. For example, bottles without a bottom are simply inserted into each other, forming a circle. The finished structure can be “put on” or taken into a ring around the trunk of a tree. To secure the curb, it must be pressed tightly to the ground with arcs.

Multi-tiered flower bed

If you really want to have a flower garden, but there is too little space, you can make it yourself from plastic bottles. The principle is the same as when constructing a border, only after laying the first tier it is necessary to fill it with nutritious soil, and only then lay out the next floor.

When planting plants for the lower tier, it is better to choose moisture-loving specimens, since when watering the water will flow down.

Mini flower beds

Beautiful and useful crafts for the garden can be made from 5-liter plastic bottles. They will serve as miniature and cute flower beds, for example, in the shape of everyone’s favorite piglets.

Group compositions in the form of trains with flowers look no less impressive.

And if instead of flowers you sow lawn grass, a large bottle turns into a cute hedgehog with green spines. All that remains is to attach the eyes and nose.

Those who are not afraid of small rodents will like cute mice from small (liter) bottles. They are good for planting petunias.

Flower pots and flowerpots

With a little imagination, plastic bottles can easily be transformed into small decorative pots for flowers or herbs. You can make them even or cut them to fit a marker in the shape of a face. Such flowerpots will look great not only in a garden gazebo, but also on a windowsill in a house.

But if you put a fabric cover on the cut bottle and attach ropes, you will get elegant flowerpots for the summer veranda.

The easiest option to do hanging pots- This is to cut out fragments of the walls on both sides of the bottle, and fasten a rope under the neck for hanging. Compact, low-growing plants can be planted in such flowerpots.

Making a beautiful garden path

Paths made from plastic containers are especially popular among summer residents. The strength of such a path depends on the laying method and what part of the plastic container serves as building material:

Paths made of plastic bottles become very slippery in winter.

Fun playground - decorating a place for children to play

Caring parents always strive to provide their children with a place to play in their dacha, where the children can while away the time while the adults are busy in the garden. Of course, it should not only be safe, but also colorful so that the kids will like it. With the help of plastic bottles it is easy to decorate the playground by making a variety of plants and animals. Regular paint will help give them brightness.

In the shade under a palm tree

What is a children's playground without a sandbox? And where there is sand, a palm tree must “grow”. For the tropicana you will need green and brown bottles for the trunk and leaves, respectively.

Before you begin assembly, you need to make sure you have a solid base. For example, fix in concrete screed a metal pin, and it must be quite long so that the tree is tall and children can walk freely under it.

When the base is fixed, you can start “growing” the palm tree:

• cut off half the bottle (the top and neck are not needed) and form a jagged edge;
• Make a hole in the center of the bottom, string the blanks onto the base pin, bending the teeth to the side for a more natural look;
• cut off the bottom of the green bottle and make straight cuts along the entire contour to the place where the wall meets the neck (if desired, the branches can be made into shapes - cut into 4 parts and make teeth on each one);
• string fragments of the branch onto the base;
• firmly attach the finished branches to the top of the stem (by welding or construction cords).

If after assembling the palm tree there are still a lot of green bottles left, you can use them to make a small (or large) Christmas tree. Remove the bottom of the bottle and cut it into long narrow strips right up to the neck. Trim the edges of the strips to resemble thorns. String the leaves onto the base.

Such a Christmas tree will look great on the site in winter, especially under the snow, and will also help out in New Year's Eve those who, in a hurry, did not have time to buy a living tree.

Guests from a fairy tale - funny animals

And of course, there must be toys. Children often take their old favorites outside. With the help of plastic bottles, you can easily diversify the “zoo”, creating real masterpieces - from the fairy-tale Frog Princess and Goldfish to modern cartoon characters.

Take, for example, a handsome cat, painted with black and white paint. Or you can use brown beer bottles and you will get a brown cat, also beautiful.

Form a head from two bottle bottoms (connect them), and the curves on the bottoms will indeed look like a real head. On one of them, paint eyes, eyebrows and mustaches with white paint, and a neat tongue with red paint. Insert small cut out ears on top. For the body, string the same short-cut bottoms onto the base, closing the body last. Melt the edges of the bottoms. Apply white paint along the melted contour of the ears and body fragments, and make a white spot on the chest on the front bottom.

Glue the head and legs - the top parts of bottles with elongated necks will be useful for them. Cut them to the place where the bottle expands, cut the edges with sharp teeth and build legs from 4-5 parts, putting them on the base wire. Screw the plugs onto the upper necks and use them to glue the legs to the body. For the tail, take a long wire and string the narrowest parts of the neck onto it, but without the plugs. To make the tail fluffy, cut the edges into thin strips.

Beautiful animals are also obtained from large 5-liter containers. With the right combination of bottles of different sizes and with the help of bright colors, you can place a zebra, horse, cow, donkey and even a giraffe on the site.

Flowers for my daughter

In the sandbox, children not only make Easter cakes. Little girls love flowers very much and often collect dandelions on the lawn (or in their mother’s flowerbed) to plant them in their sand garden. But you can make a whole greenhouse of flowers from bottles, and little girls will be happy to take part in making the simplest options. Chamomiles, cornflowers and tulips will decorate the sandbox, especially since young flower growers will be able to repeatedly “transplant” them from bed to bed without harm to the plants or mother’s nerves.

For flowers you will need:

• wire for the stem;
• straight parts of bottles for cutting leaves out of them;
• necks or bottoms for the inflorescences themselves;
• dye.

Adults can make more complex versions. Plastic roses or poppies will decorate not only the playground, but also the flower bed.

Plastic design for garden

Plastic bottles have a wide range of applications. So, if small animals and birds look appropriate in flower beds and playgrounds, then larger animals can be placed in the garden, among trees and shrubs. They will give the garden a unique look and enliven it.

Amazing garden sculptures

Representatives of large birds made of plastic look almost alive. With help multi-colored paints You can achieve a stunning realistic effect. To make them, you just need to master the technique of cutting feathers from the sides of bottles and prepare a frame on which they will be attached.

The following will look very impressive in the garden:

In the garden you can place sculptures of not only birds, but also animals of a large enough size so that they do not get lost against the background of tall trees.

Among the greenery, a bright spot will be a white sheep, which is quite easy to make if you have 2 liter bottles and several 1.5 liter bottles lying around in the pantry:

1. Cut the necks of two 2 liter bottles and put them on top of each other - this will be an elongated head. Cut out long ears from the third bottle, roll them up a little into a tube and attach them to the head in appropriate places with wire (or glue). You can draw eyes or glue two corks.
2. For the body, insert the whole bottle with the neck inside into the cut-off top. Make 3 more such blanks and attach them to the first one on the sides and top, thus giving the sheep the desired “waist” volume.
3. The neck will be a whole two-liter bottle, which should be attached to the body at an angle of approximately 120 degrees so that the cork is on top.
4. Place the head to the neck (on the plug).
5. For the legs, cut off the top of a two-liter bottle and insert a whole bottle of a smaller volume (1.5 l) into it. Make three more such blanks and attach the legs to the body with the wide part up.
6. Make a fleece from the cut bottoms of two-liter bottles, fastening them together, and put them on the body. Grip the edges of the fur coat under your belly.
7. Paint the sheep with white paint and draw black eyes.

Caring for birds

Plastic bottles can be used not only in decorative purposes, but also for the benefit of the garden. After all, it is always inhabited by the summer resident’s little helpers - various birds that collect pests from the trees. In the warm summer they have something to eat, but in winter it becomes more difficult to get food. That’s when the feeders hanging around the garden will come in handy. And if you involve children in the process, you get a double benefit: the children get an interesting activity and pleasure, and the birds get a cozy house with grains.

The simplest ones can be made from large 5 liter plastic bottles by simply cutting large arch-shaped holes on both sides.

To prevent birds from injuring their paws on the sharp edges of the bottle, they must first be melted or covered with electrical tape.

For those who rarely visit their summer cottage in winter, a feeder that fills automatically will come in handy.

You can make it from a bottle and two wooden spoons:

• make two holes in the bottle opposite each other, with the second one located slightly lower;
• unwrap the bottle and reverse side repeat the procedure;
• insert the spoons crosswise into the holes.

After the bottle is filled with food, it will be poured through the holes into the spoons as they are emptied.

A cozy place to relax using improvised means

Not only birds, but also the owners themselves should have their own secluded corner among the greenery, where on warm summer evenings you can happily drink a cup of tea, inhaling the aromas of nature. Many people prefer to place it in the garden. They are very beautiful, you can’t argue with that, but they require certain financial investments. But it’s cheap and cheerful to make from plastic not only a recreation area, but also to completely equip it.

Alcove? Easily!

A gazebo is one of the largest-scale garden crafts made from plastic bottles. But a plastic gazebo has two big advantages:

• it is easy to assemble;
• will last for more than one year without damaging the material.

Perhaps the only drawback of the building is the presence of a large number of bottles, which need to be stored somewhere during the collection process.

What the gazebo will look like depends only on the desire of the owner, and, accordingly, on the availability of “building materials”:

Practical curtains for the gazebo

IN summer gazebos there is a lot of fresh air, but, unfortunately, also dust. Ordinary tulle requires frequent washing, while a plastic curtain does not collect as much dust, and you can “wash” it without even removing it - just spray it with water from a hose (of course, if such a curtain is not hanging in the house).

For dreamy and romantic housewives, delicate curtains made from the bottoms of plastic bottles strung on a base are suitable.

Energetic people who love bright colors are more suitable for cork curtains assembled according to the same principle.

garden furniture

A table, ottoman, armchair and even a sofa in a gazebo can also be made from plastic bottles. The old one from the house is also quite suitable for relaxing in the fresh air, but it, like the curtains, will eventually become a collection of dust. In addition, it is quite difficult to take a wooden sofa outside, because such furniture is quite bulky and heavy. But rearranging the plastic chair will not be difficult.

Assembling the furniture is not difficult - the bottles just need to be placed tightly and connected together with tape, giving the desired shape. For ottomans, knitting or sewing a cape - no one from the outside will guess what they are actually made of.

Leatherette covers are more suitable for a sofa.

Unbreakable chandeliers for the garden

If you are planning an evening tea party, you should definitely go to the gazebo. To decorate the light bulb, you can cut the bottle into two parts and make a simple lampshade from the upper half and paint it or cover it with colored thread.

In plastic chandeliers, it is better to use energy-efficient light bulbs - they do not heat up so much and will not melt the material.

In more complex options chandeliers are assembled from fragments of leaves or flowers cut from multi-colored bottles.

Gardening supplies for gardening

In order for a summer cottage to look beautiful and tidy, it is necessary to take care of it all the time - weeding, collecting fallen leaves and small debris. To do this you will need tools. Of course, you won’t be able to make a hoe or rake out of plastic, but simpler ones are quite possible.

Craftsmen have long known how to use plastic bottles to benefit themselves and save the family budget. After all, if the scoop suddenly breaks, you no longer have to run to the store for a new one. From household waste, which is found in every home, a lot of useful things are obtained at no extra cost:

Garden cares

From plastic bottles you can make useful things not only for the garden, but also for the vegetable garden. These can be either small crafts in the form of, or larger-scale structures such as greenhouses.

Greenhouses for seedlings

Most summer residents grow seedlings of garden crops on their own. Some do this in apartment conditions, but more quality seedlings They are obtained from greenhouses - there is enough heat and light there.

We can’t even talk about cost, but as for durability, plastic bottles will certainly last longer than film shelters or glass structures.

To increase the service life of greenhouses made from plastic bottles, it is advisable to place them on a foundation and use a metal profile for the frame.

The simplest version of a greenhouse involves constructing walls from whole bottles that are placed on top of each other.

It will take a little longer to tinker with a greenhouse made of plates, but it will turn out warmer. In this case, you need to cut out even parts from the bottles and fasten (sew) them together in the form of a canvas. Use ready-made canvases to assemble a greenhouse.

Watering "systems"

For gardeners, watering is no less pressing issue than having a greenhouse. Instead of ready-made watering systems in the garden, you can use. They must either be hung above the bush, having previously made holes in the lower part, or dug into the ground.

In addition, the bottle makes a good sprinkler - you just need to make small holes in it and connect it to a watering hose.

Getting rid of pests

A repeller made from a plastic bottle will help drive away the gardener’s worst enemy, the gardener, from the property. It not only plows up the beds, digging its tunnels, but also damages the root system of plants in the process, depriving gardeners of the future harvest.

If you cut the side walls of the bottle, bend them and put the container on a steel rod, when there is a gust of wind, the bottle will spin and make noise. The sound will go into the ground through the rod and deprive the mole of the desire to manage in this noisy place.

The list of things you can make from a plastic bottle with your own hands is quite long. These are just a few crafts that make life easier for summer residents. Agree – it’s better to get the most out of bottles than to pollute them environment. Take care of nature and work with pleasure!

21 ideas for using plastic bottles - video