Installation of window blinds. Installation, repair and maintenance of horizontal blinds. Installation without using self-tapping screws

Installing blinds solves many problems with window decoration. Curtains, drapes, tulles, no matter what fabric they are made from, require frequent washing, since dust and dirt accumulate on them. The thickness of the curtains determines how well they transmit or block light.

Blinds are much more convenient than curtains in many aspects.

Depending on the angle at which the lamellas are located, they completely open access to natural light into the room, partially block it, gently diffuse it, or completely isolate the room not only from light, but also from thermal radiation. They do not require special care, and installing blinds yourself is not difficult.

Varieties

Horizontal

The light-protective design with horizontal lamellas has become familiar, almost classic for window design.

Advantages:

Compactness. Installed directly on the window, leaving the window sill free. This saves space and allows you to place greenery on the window in favorable conditions;
Low weight of the structure;
Strength and rigidity of the lamellas, preventing deformation;
Fire safety;
Simple control mechanism;
Special coating or impregnation against dust, dirt, odors and grease;
Resistant to humidity and temperature extremes;
Various materials for the manufacture of lamellas: wood, plastic, aluminum, less often fabrics;
Easy installation;
Affordable price.

It is worth mentioning some of the disadvantages:

When mounted on a frame, the angle of inclination of window sashes when opening is limited;
The slats emit a characteristic knock or ringing in the wind. To avoid this, you need to purchase lower fasteners, which are not included in the kit and quickly become unusable;
The structure is subject to repair if several slats are severely deformed, but it will cost the same as new blinds;
Not suitable for balconies and loggias with sliding windows.

Vertical

Distinguishes them from horizontal ones:

More aesthetic appearance. Horizontal blinds are more likely to be functional, while vertical blinds are decorative;
The ability to cover a large area with one cornice. Horizontal blinds, as a rule, consist of narrow slats and are intended for minimalistic decor large windows. Vertical models have different widths and easily cover the area of large windows, arches and doorways.
Variety of materials. They can be made of wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, filament. The abundance of materials provides another advantage - the variability of colors and textures;
Modern and original design windows that open up more design possibilities;
Simplicity of control mechanisms. Both mechanical and electrical are possible;
The ability to place photo printing on the “curtains” due to the larger surface and best characteristics material;
Practicality. Larger lamellas are easier to clean if necessary, which does not occur often. If, in case of severe contamination, for example, in a children's room, the lamellas still need to be subjected to hygienic procedures, this will not take much time - they can be washed by hand and in washing machine;
Possibility of installation on non-standard windows (triangle, trapezoid, arch, bay window);
The structure is subject to repair. To replace a particular part, you do not need to call the master, it is simple enough to do it yourself. You can replace the slats one at a time without having to dismantle the entire structure.

Vertical blinds, as the name implies, are a simple and convenient light-shielding design, consisting of longitudinal vertical plates.

Rolled

Roller blinds, roller blinds are solid canvases, often made of textiles, but other materials are also possible, which, like horizontal blinds, roll up. The height can be adjusted by fixing the curtain with a weighting agent on the bottom bar of the canvas.

There are different types of roller shutters: with an open drum (for mounting directly on the window) and with a decorative cornice; "mini" for installation on each frame separately and "roll-cassette" for curtaining the entire window as a whole.

There is an opinion that roller blinds– this is the most budgetary and practical option window decoration, but this is not entirely true. Of course Roller shutters have their advantages: a variety of natural and synthetic fabrics, colors and patterns, ease of care (wet cleaning is allowed) and operation, the ability to fix the curtain at the desired height, special impregnations from dust, moisture, high temperatures and glare, compatibility with other types of curtains. It is convenient if you need to hide a room from the sun, or decorate a window with beautiful tulle so that from the street you cannot see what is happening inside.

But with so many advantages, they also have significant disadvantages.:

Budget price- it's a delusion. Yes, a medium-sized curtain itself made from a common material will be inexpensive, but it will look boring. In order for the window design to be complete, it is necessary to consider additional decor, and this increases the cost several times;
Roller blinds in the bedroom, office and rooms with high windows need electrical control. Electric drive designs are expensive, and some manufacturers also produce noise;
Impossible make a custom curtain from a specific textile. You can only choose specific products of a specific brand, since the range of fabrics for the production of roller blinds is very limited: translucent, textured, reflective, perforated, blackout and that’s all, perhaps;
Maximum width roller blinds – 280-300cm, that is, cover a large area with one curtain rod, for example, panoramic window or the balcony will not work;
They can There will be problems with installation not on the wall, but in the window opening, since the bobbin is wider in width than the curtain itself. On the sides window openings There will inevitably be gaps. Ceiling or wall mounting is preferable.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows.

The range of materials, colors and textures is very diverse.

Peculiarities:

They close from top to bottom, like classic canvases, from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted, thus closing either the upper, lower, or central part of the window;
Suitable for covering windows irregular shape;
The optimal solution for dormer, attic, ceiling and inclined windows;
“Opening”, the canvas is compactly folded and hidden inside the cornice;
Convenient for installation on all types of windows;
Various ways fastenings and control mechanisms (manual and electric);
The woven fabric is washable;
The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection;
Easy installation can be done by yourself.

Types of pleated:

Classic. In appearance they are most similar to horizontal blinds, but they can also be vertical. Made from fabric, paper or plastic. Designed to darken the room, protect against heating by the sun's rays, and zone the interior space of the room.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. Corrugation made of plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

Inclined. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is in a specific assembly system, which does not allow the canvas of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Arched. The most flexible canvases that take any shape, like a paper fan. Good decision for rooms with non-standard window shapes (arches, trapezoids, triangles, beveled windows).

"Day Night". The fabric of such blinds consists of two layers of fabric: light, light-transmitting fabric for daytime use, and thick, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal lamellas or a solid canvas, but are not horizontal blinds or roller blinds. They differ in the types of cassettes (angular, round, flat), controls ( different kinds mechanical and remote), materials used (plastic, textiles, bamboo, aluminum).

Their main feature is their design, the special structure of which makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, wrinkles and unevenness, and completely opens the window sill.

Advantages:

Compactness. Cassette blinds take up a minimum of space, leaving owners the opportunity to use their imagination and organize additional window decoration or leave the window sill as a functional surface;
Simple and clear type of control;
Long term services. Special impregnation protects the canvas from dust, grease, dirt, moisture, abrasion;
Ease of hygiene procedures. Cassette systems do not require special care. Their small surface area can be simply wiped with a damp sponge. soap solution once every few months;
Variety of designs for interiors in any style;
The tight fit of the canvas to the surface of the glass protects equally well from heat and cold;
Possibility to install the system yourself;
A variety of materials - from light window decoration to total blackout protection;
Possibility to combine blinds with curtains, tulle, lambrequin.

Mounting methods

There are three types of fastening blinds: to the wall, to the ceiling, directly to the frame, and two ways - with and without drilling.

The universal basis of any fastening is the cornice, which is attached to the wall, frame or ceiling in different ways.

With drilling

This is done using self-tapping screws, brackets on which the cornice and fishing line are installed. Additionally, you will need a pencil, ruler, drill, and screwdriver.

First you need to make markings in the places where the brackets will be located.

For reliability and accuracy, it is necessary to drill holes for the clamps in the marked places. Then, applying the brackets one by one to the PVC frame, use a screwdriver to secure them to the markings. Next, the cornice is installed and the entire structure is assembled.

No drilling

If you plan to replace the blinds or other window decoration options in the future, damage plastic windows Not recommended. The holes from the screws will remain in the frame forever and will significantly spoil the appearance of the windows. In this case, it is easier to turn to a method that does not require drilling.

In this case, the brackets are attached in two ways:

by the upper part of the PVC profile on the opening doors (you can simply hang it like a hook);
on double-sided tape, which can be glued without fear of leaving marks.

Mounting blinds on the balcony requires a special approach. Important role plays here balcony design. The type of glazing determines the possibility of choosing certain blinds and the method of their fastening. In general, almost all options are available for balconies. Special attention In this case, you should pay attention to the type of blinds, since not all of them are universal for different types windows For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can become deformed during use or from strong winds.

Measurements and markings

The final result depends on how correctly the measurements are taken.

Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats constantly ride up against the wall.

It is important to pay attention to the following points:

For the most accurate indicators, a steel tape measure is used;
The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter;
When ordering blinds, the width parameter is indicated first, length – second;
Not a single window opening has absolutely ideal geometric shapes, so measurements in height and width must be made at least at two points.

Horizontal

If you plan to attach blinds to the movable half of the window, you will need to measure the gap between the glazing beads and add 30 mm or more, which will prevent gaps from appearing in the structure. The height of the blinds is equal to the height of the window sash.

For installation inside a window opening, measurements are required at three points in height and width, since openings are not always absolutely proportional.

The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) and has a margin of 1cm. To install the cornice, you will need an additional 30-40 cm to the slopes and hinges. The control chain is 2/3 of the window height.

When choosing to fix the cornice on the wall, the width parameter increases by 10 cm, the height is measured from the point of attachment of the brackets to the floor at random.

Vertical

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right sides of the arch, subtract 1 cm from the smaller value.

For wall mount you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor.

Ceiling installation involves determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Rolled

To install canvases to the wall, only one measurement is required - from the edge of the window sill to the markings for the brackets, and the width can be up to 300 cm.

In the window arch, roller blinds are installed after measuring the width, from which you need to subtract 4 centimeters, and the length of the curtain is equal to the height of the window minus 15 mm.

Pleated curtains similarly do not require a professional approach to taking measurements and installation.

Installation of vertical models

Vertical blinds are the most convenient way to decorate a window yourself. They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with or without a decorative facade.

The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape. The special tape, despite its seeming impracticality, is fixed very firmly, so it is important to correctly apply the markings for installing the brackets. Once they are glued, moving them will be very problematic.

Installation procedure vertical blinds:

Preparing tools. You will need a stepladder, a set of screws from the kit, building level and drawing supplies, drill, screwdriver.
Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
Attaching the brackets in a suitable way(with or without drilling).
Installation of cornice.
Installation of slats. To do this, you need to pull the control cord on which the fastenings for the slats are located so that they are in the desired position. Then fix all the slats on the hooks of the fasteners.

Installation of horizontal

For installation you will need a set of tools: drill, Phillips screwdriver, screwdriver, drawing supplies.

The instructions for installing horizontal blinds on windows contain a list of items that are carried out step by step:

Draw a marking line for installing brackets. It must take into account the distance between the clamps and the control mechanism, between the brackets (from 60 cm) and to the extreme areas on the blinds (25 cm). For large blind widths and significant weight, it is recommended to use intermediate fasteners.
Drill holes for installing dowels on the surface to which you plan to attach the brackets. It is possible to use blinds on plastic windows without drilling.
Profile installation.
Fixing the top rod of the blinds on the brackets. It is important to remember that the blinds at this stage are already assembled.

Working with horizontal models on inclined surfaces requires a little more effort and skill.

How to hang roller blinds?

Like other types, roller blinds or shutters are attached in several ways: they can be hung, glued, or attached to a frame.

First way– the simplest and most accessible for do-it-yourself installation is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt-and-turn mechanisms on windows. Performed step by step:

Degreasing the areas of the frame and fasteners that will be connected with adhesive tape.
Marking the fastening of roller shutters.
Installation of roller blinds. The chain mechanism can be installed on any convenient side.
Assembly of brackets.
Marking for fastening brackets. To do this, you need to install them on the assembled roller blind, install it on the window without fastening, mark with a pencil the places for the adhesive tape, and remove the curtain.
Applying adhesive tape to the back surface of the brackets, mounting on a window.
Installing the guide string against sagging. It is attached to the “ear” of the top bracket and the weighting of the curtain, and at the bottom it is fixed in the tensioner, which is installed on the frame.

The second method involves attaching to a stationary frame (not opening):

First of all you need to mount the roller blind, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening.
Second step– fastening the brackets with adhesive tape in the upper part of the frame and the string tensioner in the lower part. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to secure cassette tapes?

You can also install cassette blinds yourself. Before installation, you must read the instructions, make sure that everything is complete, and prepare all the necessary tools: a screwdriver, drawing tools, a screwdriver, a drill, cotton pads or a small piece of cloth, and a degreaser.

When everything you need has been collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove the side covers of the box, lift it to the top of the frame, focusing on the guide protrusions, drill holes for fastenings, and secure with screws. You can use a screwdriver for this purpose, or you can perform the process manually using a Phillips screwdriver.

Once the box is installed, you need to secure the covers to the sides. After this, you can glue the guide strips to the degreased frame. The guides should be several centimeters below the corner of the bead.

Important nuances

Installation work on window decoration requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features in this work.

Installation of blinds begins long before preparation work surface and a set of tools.

The first step of this process- a balanced decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room. So, it is more expedient to choose vertical blinds for the living room that let in light, for the bedroom automatic roller blinds with blackout fabric, and for the kitchen, where the smells of cooking and products of combustion of food are constantly hovering - plastic blinds that do not absorb grease and dirt.

Second important point - this is the correct marking. A lot depends on it, including how easy the installation process will be. If all the architectural features of window openings are taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers.

It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of their deformation.

The installation of blinds must be carried out exactly with the markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening - with or without drilling.

It is also necessary to provide for the type of control. For low windows great solution is one of the varieties of mechanical direction. Magnetic, automatic (electric) control with an electric drive is suitable for roof and inclined windows, windows in the bedroom.

The fashion for bulky curtains that collect significant amounts of dust in record time has already passed, so most people prefer to use light, airy fabrics to decorate the window area. To protect the room window from strong sunlight and curious passers-by or neighbors increasingly began to use horizontal blinds.

Horizontal blinds are easy to use, which is why they are so popular.

It is not difficult to figure out how to install horizontal blinds, but in this matter there are a lot of subtleties that need to be taken into account so that in the future the mechanism works correctly and performs its function. Blinds can be made of wood, plastic and aluminum, the latter being the most common, as they are extremely easy to use and can be mounted on all types of window frames.

What you need to install blinds effectively

Blinds are sold ready to install and with a complete set of fasteners, so you can install them yourself. When buying these interior elements, you can order the desired size that will fit under the window. In addition, you need to pay attention to the type of fastening of the blinds, since in some cases, in order to fix the blinds mechanism, it is necessary to drill the window surfaces, while in other cases it can be dispensed with. The most common option is blinds that have standard twist brackets that are mounted on self-tapping screws, since with this type of fastening you can pretty quickly.

Despite the fact that, after reading the installation instructions, it may seem to many that it is not difficult to install blinds, in fact, you need not only to have the whole range of necessary tools, but also certain skills, without which installing blinds on windows can take a long time.

Before installing horizontal blinds, you should take them out of the box and check if all the fasteners are available, as well as prepare all the tools that may come in handy during the work. TO necessary tools relate:

crosshead screwdriver;
roulette;
spirit level;
hammer;
marker;
cutter;
pliers.

Then you need to think about how to install blinds on the window.

Return to contents

Preparatory stage for installing horizontal blinds

During the preparatory work it is very important to do the markup correctly. First of all, it is necessary to ensure that the structure, after fastening to window frame did not close the window handle and did not interfere with its opening and closing. Next, you need to use the level and tape measure to determine the optimal place for attaching the brackets.

When choosing the optimal place for attaching the brackets, it is very important that one of the upper brackets is located in close proximity to the mechanism that controls the opening and closing of the horizontal blinds, since during use this place takes a lot of effort, and if handled carelessly, you can break the mount.

After determining the optimal attachment points, you need to fix the measurements with a marker. Often, the set of brackets for horizontal blinds does not include screws the right size. It is best to use self-tapping screws for fastening the brackets, the size of which does not exceed 10 mm, since very long self-tapping screws can lead to a violation of the tightness of the window. If the tightness is broken in the middle of the plastic window, water vapor will accumulate and undergo a condensation process, which will eventually lead to accumulation large quantity liquid inside the window and failure of the mechanism that opens the window.

After you most likely, you will immediately have a question about the need to install blinds. In most cases, blinds are not just an element of window decor - they are a means of protection from the sun, and it is about blinds that we want to tell you today, telling you about their advantages, types and how to install them yourself.

The content of the article:

Do I need to install blinds on windows?

Some people think that blinds are just a necessity, while others think, on the contrary, that they are not needed, so who is right in this situation!? In fact, there are no right or wrong in this situation, since the need to install blinds is an exclusively subjective opinion. This opinion is based on two factors: personal taste and necessity. Thus, we can draw a small conclusion that blinds are installed in two cases: if they like and / or if there is a need for them. Let's look at these two factors in more detail.

Many people like blinds because of their beauty, because there are several types of them, which we will talk about a little later. With the help of blinds you can visually decorate the window, especially by using blinds a certain color or with various patterns that will perfectly fit into the interior of the room, and also “thematically” transform the window. Many prefer blinds, because they can be used to replace curtains and curtains that many are already tired of.

As for the need for blinds, they help protect against sun rays. If your windows face east, south or west, then in summer you will be very uncomfortable with direct sunlight.

Firstly, due to direct sunlight, the air temperature in the room increases significantly. By installing blinds, the temperature in the room will be several degrees lower, as they will prevent direct sunlight from entering. In addition, blinds are necessary if you have an air conditioner installed, otherwise it will take longer to cool the air in the room, and the achieved temperature will be quickly lost. Therefore, in order not to force the air conditioner to work unnecessarily, it is necessary to install blinds.

Secondly, due to direct sunlight, the room becomes very bright and this causes discomfort, especially negatively for those whose windows face the east side, when the sun begins to shine in the eyes early in the morning. Blinds are also necessary if you don’t have a very beautiful landscape outside your window - blinds will hide all this beautifully. Well, another small positive point about blinds is that they cover the room from the sun's rays, so furniture, paint, wallpaper and window profiles are inner sides They are less susceptible to fading.

Types of blinds

Today there are 3 types of window blinds:

Horizontal;

Vertical;

Fabric.

Blinds can be made from a variety of materials:

Aluminum;

Plastic;

Tree;

Textile;

Bamboo;

And so on.

The choice of type and material of blinds depends solely on your preferences. If you prefer classics and simplicity, then these are definitely horizontal aluminum blinds. If you do not plan to hang curtains and curtains or want to install blinds instead, then best option- These are vertical blinds. If you want something beautiful and elegant, choose fabric blinds, they are very beautiful, and besides, they are different from the two previous blind options. For those who prefer something new or your room is designed in a certain style, we recommend choosing blinds made of wood or bamboo.

Installing blinds yourself

An integral part of installing blinds is measuring them. If the measurement is taken incorrectly, it may not only look unsightly, but also have a negative impact on the window profile.

Measuring horizontal and fabric blinds

There are 2 options for fastening blinds: on glazing beads and on a profile. Of course, if you want to attach the blinds to glazing beads, then you must be very careful in choosing the length of the screw, since a long screw can damage the glass of the double-glazed window, which will ultimately lead to depressurization of the entire double-glazed window and negatively affect its thermal insulation properties. Installing blinds on the profile of a plastic window is simpler, there is no danger, but it is one thing when the hole is made in a glazing bead, which can be easily replaced, and another thing when the hole is in the profile. Personally, we recommend giving preference to attaching blinds to glazing beads, and, if possible, to fastenings with double-sided tape; this method does not require extra holes in the window.

The width of horizontal blinds is measured from the left edge of the left bead to the right edge of the right bead. The height of the blinds is measured in the same way: from the top of the upper bead to the bottom of the lower bead. It is important to consider one point: how you will fix the blinds. If you want to strengthen the blinds with glazing beads, and at the same time install the lower clamps also on the glazing beads, then the length of the blinds must strictly correspond to the distance from the base of the glazing beads.

We decided to show the measurement of the blinds in the picture below. Blue glazing beads are shown - plastic strips that secure the glass unit to the profile. The red lines show the boundaries along which it is necessary to measure the window, taking into account our recommendations.

Measuring vertical blinds

In turn, measuring vertical blinds is a simpler process, since there are no special nuances. The peculiarity of the measurement is how you want to fix the blinds. There are three types of vertical blinds:

To the top window slope;

Higher window opening(like a regular cornice);

To the ceiling.

Each of these options has its own advantages - consider them.

If you want to limit the entry of direct sunlight into the apartment, and at the same time give preference to vertical blinds, then it is best to attach them to the upper part of the window slope - this type of fastening has more beautiful view. If you want to completely hide the window behind the blinds, or if you have plastic slopes, then vertical blinds can be fixed above the window opening. If you want to install blinds instead of curtains and stretch them along a large window opening or across the entire wall, then you need to attach the blinds to the ceiling.

If the blinds will be installed in a window opening, then their width should be equal to the width of the window opening, and their length should be strictly from the upper slope to the window sill, even a little shorter, so that they do not cling to the window sill. If you want the blinds to protrude beyond the perimeter of the window opening, then the width of the blinds must be made with an allowance of 15-20 cm, and the height can be made either with an allowance of 20-30 cm greater than the height of the window opening, or even make the blinds to the floor. If you want floor-length blinds, we recommend that you give preference to full-wall blinds - such blinds and the type of their fastening will look very beautiful.

When your measurements are ready, you can go to a company that produces blinds, or order them through an online store, which will be cheaper and easier. The only thing you will need to choose is the color of the blinds and check whether fastening materials are included with the blinds.

Installation of blinds

How to install blinds on plastic windows? Now let's get to the fun part - editing. Horizontal and vertical blinds have different way fastenings, so we will talk about them separately.

Installation of horizontal blinds

To install horizontal blinds you will need a screwdriver or screwdriver and a pencil. The installation procedure is very simple. We put brackets on the top of the blinds and measure which part to screw in the screw and mark it with a pencil. It is very good if the brackets are attached to one self-tapping screw in order to make fewer holes in the window. So, when the mounting location is outlined, we check that everything is correct and remove the brackets. First, take one bracket, place it in the intended area and screw in the self-tapping screw. After that, we do the same with the second bracket. Then we put the blinds on the brackets and in the same way fasten the clamps on the sides from the bottom of the blinds. We check that everything works and proceed to install the blinds on the remaining parts of the window.

As for horizontal fabric blinds, the principle of their installation is somewhat different from the above. As a rule, this type of blinds is attached to brackets, which are fixed to the window with an adhesive base, that is, simply put, they are glued to the profile. Just like horizontal fabric blinds, they are also fixed at the bottom.

You will learn more about the installation of horizontal and fabric blinds from the videos below.

Installation of vertical blinds

Installation of vertical blinds has 2 types of installation. The first type of installation is when the cornice of vertical blinds is attached to the ceiling or to the upper slope. The second type of installation is when the curtain rod is attached to brackets that are fixed to the wall.

With the first type of installation in the middle of the eaves, there are special mounting holes, through which screws are screwed in, fixing the structure to the ceiling or to the slope. To fix the cornice, you need to attach the cornice itself, then you need to mark in which places to make holes for fastening. Using a puncher, make holes and drive dowels into them. Please note that if you use a hammer drill to make holes in the slope, be careful not to break off part of the wall. After you have driven the dowels into the holes, attach the cornice and secure it with screws.

With the second type of installation, you first need to fix the brackets on the wall, after which the cornice is put on them. Before marking the areas where the brackets will be fixed, it is necessary to attach the cornice and take measurements. After this, we make holes in the designated areas, drive dowels into them and then fix the brackets with a screw. At the end installation work we fix the cornices on the brackets.

The next step in the installation of blinds is their assembly. Unlike horizontal and fabric blinds, vertical ones require assembly, but it is not difficult. To do this, you need to collect all the sliders together and turn them with notches towards you. Then we take the lamellas and insert them into the runners; when the lamellas are tightly secured, a click will sound. Then weights are inserted into the lower part of the lamellas and secured with a chain. After this, check the functionality of the mechanism and proceed with fastening decorative panels to the cornice.

Video guide for installing blinds

This video clearly demonstrates the process of installing horizontal blinds. In the installation method used, the brackets are attached directly to the profile with self-tapping screws, and not to glazing beads.

In this video you can familiarize yourself with the installation of fabric blinds, the brackets of which are also attached to the profile with self-tapping screws, and are not glued to it.

The last video will tell you how to install vertical blinds and assemble them.

At first glance, it may seem that installing horizontal blinds seems like an easy and simple process. However, it is worth considering that windows and walls in houses are most often uneven, so installing horizontal blinds requires appropriate experience and knowledge.

If you are confident that you can install the blinds yourself, then you must adhere to a certain installation technology.

To do this, you will need tools such as a Phillips screwdriver, hammer, hammer drill or impact drill, drills and drills. The first thing you need to do is decide on the method of installing horizontal blinds - attach them to the frame or in the window opening, to the wall or to the ceiling.

Only after choosing the mounting location and taking correct measurements can you begin to install the blinds. In order for the installation of horizontal blinds to be carried out reliably and efficiently, it is necessary to use fastenings - brackets or brackets, which are supplied with any blinds.

Brackets can be used to securely mount blinds on almost any surface.

Video: Blinds on plastic windows. Measurement and installation.

Horizontal blinds installation technology:

1. Mark out the places where the brackets will be attached. When marking, you need to take into account that the brackets should not touch the latch and the control device. Using a ruler and level, mark the placement of the fasteners from each other at a distance of more than 60 cm and less than 25 cm from the uppermost sections of the blinds.

If the width of the blinds is large, you can use intermediate fasteners to increase the reliability of installation. One of the brackets must be placed near the lifting and lowering device, since in this area the blinds device is subject to the greatest load.

2. Consistently drill holes in the wall and insert dowels into the markings. Screw the brackets with screws. It is very important that the screws and dowels are completely similar to the fastening, wall or ceiling material.

If you plan to attach horizontal blinds to a PVC window frame, then it is not necessary to drill the window profile, since there are special brackets designed for metal-plastic windows. It is worth noting that this fastening method may only be suitable for a swing-and-turn sash.

3. The blind curtain rod is installed on the mountings.

4. The top bar of the blinds is placed on the brackets and locked with a lock. Moreover, horizontal blinds must already be assembled.

The installation of inter-frame horizontal blinds has some differences from the technology presented above. Such blinds should be installed in the internal space between the glass panes.

That is why, when installing them, the brackets are first attached to the upper cornice. Then, by crimping, the flexible adapter is attached to the rotary rod.

The control device is brought into the room through a pre-drilled hole. Only upon completion of these operations, it is possible to proceed to fastening to the frame of inter-frame horizontal blinds.

Video: How to install horizontal blinds yourself

Blinds, which even 10 years ago looked like a real foreign exotic, today have firmly entered our lives. Majority office premises and institutions have moved from using standard curtains to universal blinds that collect less dust, look stricter and are incredibly comfortable.

Blinds are used even in rooms designed in classic style, because their functionality, ease of care and appearance are on top. In addition, blinds provide effective protection spaces from sunlight, allow you to easily adjust the level of illumination in the room, reliably shield the room from prying eyes.

The installation of blinds must be carried out in accordance with all the rules, otherwise you risk getting a lot of problems: the curtains will not move, it will be difficult to assemble the curtain, etc. A high-quality installation ensures the longevity of the blinds. When installing, you need to take into account the design features, the specifics of the walls (or window frames) in the room.

PVC window companies offer blinds in a wide variety of shapes and sizes. Depending on the purpose, blinds are made from:

There are different types of blinds:

These types differ significantly in the location of the lamellas and installation methods.

Vertical blinds are a rarity in ordinary residential areas, they are more often used in offices. They are mounted above the top edge of the window, similar to curtains, although this may adversely affect their functionality. And roller blinds and horizontal blinds are more often used at home instead of traditional curtains. They are installed not only in the window opening, but also on top of the window.

Roller blinds are mounted on the front surface of the corner of the upper slope of the window profile.

Blinds with horizontal slats can be mounted directly on the window profile, on each sash. Often horizontal slats are complemented with curtains with curtains. Installing blinds directly on the window profile saves useful space in the room itself and frees up space on the window sill.

The design of the blinds consists of:

For windows of non-standard shape, you need to use lamellas of a special length, which will best provide light protection to the room.

If your window has two sashes, then when installing the blinds, pay attention to the location of the blind lifting mechanism (right, left).

Three ways to install blinds:

onlay;
for each window sash separately;
directly into the window opening.

A factory set of blinds usually includes all materials for their installation: screws and self-tapping screws, as well as other parts.

The choice of installation option is related to the design features of the window: installing blinds on standard double-hung windows is a little easier than on inclined roof windows. Installing blinds on PVC windows is considered one of the most difficult, since working with plastic compared to, say, wood, has a number of specific features. The installation of cornices on plastic windows must be carried out as carefully as possible and it is better to do this in the warm season (at temperatures above +5 degrees Celsius).

Installation of blinds on a window sash can be done using self-tapping screws, brackets, or by drilling holes in the frame. This is the most durable and reliable.

Important! The tightness of the profile does not suffer when the blind cornice is attached to it using drilling. If it becomes necessary to remove the cornice and holes remain in the frame, they can be filled with white silicone sealant.

If you don't want to drill holes, use brackets that attach to the frame without drilling.

Important! In most cases, blinds can be attached to screws that are already in the window profile. This installation method is no less reliable than drilling holes. You can learn about the possibility of such a simple installation from the blinds’ instructions.

Progress of installation of blinds

After unpacking the blinds, read the instructions. Installing blinds means: measuring the window and adjusting the dimensions of the blinds to it; then install the fastenings for the cornice and cord system; assemble the strips onto the cornice and check the functionality of the system.

Measurements are necessary so that later it will be convenient to use the light-protective sheet without complaining about distortions or frequent breakdowns. It is especially important to check the dimensions of the canvases and adjust them to the place of attachment if the window opening has a specific geometric shape.

Before screwing, you need to mark the position of the fasteners with a pencil, checking them with a level and a tape measure to avoid a skewed fit and leave room for adjusting the container, and also to ensure that the slats do not extend beyond the window glass.

2. Installation of cornice and slats

Before installation and actual installation, it is necessary to mark the fasteners with maximum accuracy and symmetry. Additional fastening must be provided for the control cord so that the structure can withstand the additional load. All elements are fixed to the wall with screws or dowels. Next is the installation of the cornice. The slats and runners themselves will be attached to it. The rigidity of the structure is guaranteed by the upper cornice strip, so there is no need to further strengthen the strip with glue, sealant or foam - it is fixed quite rigidly.

When re-installing, you need to measure the width of each window sash so that the window fittings do not interfere with the free hanging of the slats. Also, when choosing an installation “in the window opening”, you need to reduce the height on each side by 2 cm so that the canvas does not touch the window sill. To secure the blinds close to a plastic window, you need to drill the plastic window frame according to the markings - pre-drilling will prevent cracking of the plastic.

If the plates on which the blinds are hung do not fit tightly to the window profile, use pads.

Brackets for blinds are screwed into the holes using self-tapping screws. Next, you need to secure the brackets upward with latches and insert the container with the blinds into them.

The lower holders are attached like this: lower the curtain to mark the lower points (the canvas should be loosely stretched). Using these marks, drill holes into which you need to screw the lower holders that secure the canvas in the “micro-ventilation” position. Make sure that the staples sit firmly in the plastic.

When installing an overlay, you need to add 5cm in width so that the entire opening is closed. The height is adjustable and can reach the window sill or the floor itself.

There are a number modern methods installation of blinds, which involves installing a cornice with slats on brackets attached to the window frame without drilling. The striped cornice is simply hung on the brackets and snapped into place. The design is collapsible, which allows you to remove the blinds when you need to wash window glass or wipe the slats. This is the easiest way to install blinds.

Features of mounting blinds by type

Vertical blinds

Before starting the installation of vertical blinds, you need to decide whether a wall or ceiling mount for the cornice will be more convenient. The height of the light-protective sheet depends on the place where the cornice is attached.

The thickness of the guide for vertical blinds should be at least 5-6 cm, such a gap will ensure free movement of the slats. If there is an obstacle between the blinds and the wall (batteries, etc.), then you will need to install an additional bracket, which is not included in the kit, you need to buy it separately.

If you want the blinds to be at some distance from the wall (cases are different: a pipe, etc.), you must additionally purchase a bracket

For vertical blinds, the order in which the slats are hung is also important: they must be attached to the cornice in the same order that was in the factory box. Also, before installation begins, it is necessary to determine the correct direction of the pendants. Correct position, when closed you do not see the seam on the blinds material.

Don't forget to place the bottom weights on the vertical strips to keep the canvas looking flat. The loads on the outer and inner sides are connected to each other by a chain. The plumb line is attached to a cord that is included in the kit. Different manufacturers use plumb bobs of different shapes.

There are a wide variety of vertical blind mounts available in stores, but they are very often unreliable. It will be most reliable to mount the blinds using a pair of brackets that need to be screwed to the wall with self-tapping screws.

Roller and horizontal blinds

Horizontal and roller blinds, as well as vertical ones, are equally conveniently mounted on a wall, attached to a window or ceiling. The main thing is to clearly measure whether the canvas will interfere with opening the window. If this happens, in the strips, if possible, you need to cut a hole in advance for comfortable opening of the window sashes.

When attaching with double-sided tape, do not forget to thoroughly remove dust and degrease the surface.

You have convinced yourself that self-installation making blinds is quite simple if you know a few tricks to make the process easier. Good luck using your own blinds!