How to install a door frame in a bathroom. Bathroom door: features and installation technology. Extension of the doorway

Installing bathroom doors is not an easy task. The difficulty is that this room has high humidity. The installation process has standard steps, but there are a few things to keep in mind.

How to choose the right doors

After the renovation is completed, you should decide on the door model, which should be combined with the design style of the room.

We measure the length, width, and depth of the doorway in order to correctly select the size of the future door before installation. We also determine the size of the door frame - these are three panels, the height and width of the doorway.

It is important to choose a model that is resistant to high humidity, this will extend its service life. Warmth and sound insulation will not be superfluous for the bathroom.

Let's look at doors of different materials:

Glass. They have a high level of resistance to moisture and do not deform when exposed to temperatures. High-strength glass, environmentally friendly and with high level security. The big advantage of this door option is considered wide choose design and various decorations. The downside is the high cost of such doors.

Plastic. Also a good choice for bathrooms. They have excellent noise and heat insulation. Affordable prices, large selection of colors, shapes, textures. Ideal for people with low incomes.

Wooden. This material is classic, but not very practical, as it is susceptible to both moisture and temperature. To increase the service life of doors, it is advisable to treat them with special impregnation and varnish. In the interior, such material will look advantageous, although its price is higher than that of previous options.

Chipboard and MDF. They are the most common and cheapest. They are covered with a laminate on top, which allows you to implement any design ideas. The disadvantage of these doors is their instability to temperature and moisture. The short service life of the model also characterizes it not from the best side.

Self-installation of a bathroom door

In order to install the door in the bathroom yourself, here is some help: step-by-step instruction, which can be found below.

Tools required for installation:

miter box, hacksaw;

mallet;

screwdriver and drill;

construction level;

construction knife;

cue balls PH 2 or PZ 2;

chisel;

pencil for marking;

feather drills 16, 20, 18.

It is necessary to prepare the following materials:

polyurethane foam;

black or yellow wood screws;

cashing and nails for glazing beads;

eraser or wooden backing;

sanitary silicone.

Extension of the doorway

We take into account the presence of a threshold - it protects the apartment from unexpected flooding. We leave a small gap of 5 cm between the door and the threshold to ensure good ventilation. To install a door, you must correctly enlarge the doorway or shorten the door.

If the base is made of plaster, then we enlarge the opening using a grinder or saw. If the wall is made of asbestos cement sheets, the door leaf needs to be reduced. If you need to shorten the door, you should purchase wooden model, so it’s easy to file it without violating its integrity.

Assembling and installing the box

We carry out waterproofing, namely, we use diffusion self-adhesive tape and fasten it over the entire surface inside the opening.

Next we install the door frame. To do this, screw the screws into the door leaf. If the parts are disassembled, we install the box after preliminary assembly, adjust it to size, leaving 0.5 cm for gaps. At the widest point of the profile, we make a cross cut to the size of the thickness of the sliver.

We insert awnings to ensure easy closing and opening of doors. It would also be advisable to use hinges - this does not require insertion. Having assembled all the components in advance, you can begin installing the door frame.

Preparing the door leaf

After installing the door, we begin installing the door leaf. The process consists of the following steps:

we embed the latches;

install hinges;

install the handle.

If there are no awnings, installing hinges is not difficult.

Using a drill, install the latch from the end of the door. To do this, we make a cutout according to the length of the latch. We make fastenings using self-tapping screws.

To install the handle:

We fix the square that was inserted into one of them with a small screw.

We thread the square into the prepared slot for the latch and fasten it to the canvas.

We attach the remaining part of the handle to the protruding square.

Key points for door installation

We treat all cracks with polyurethane foam to ensure tightness. installed box. You need to let the foam dry well, this will happen 6-10 hours after treatment. It should be taken into account that the material expands, so we make spacers in doorway to avoid problems with opening and closing the door in the future.

When the foam has completely dried, you can hang the door leaf. It is recommended to embed a ventilation grill into it - this will significantly extend the service life of the door.

The equipment of a modern bathroom differs in many ways from the standard one that everyone was accustomed to in Soviet times. And interior design in rooms where it is used a large number of water, has also undergone a noticeable evolution. Doors to a bathroom, mini-pool or toilet are now selected in a single key with plumbing and other equipment. But it’s not so easy to choose and install a door leaf from moisture resistant laminate so that the doors meet all search criteria.

Features of choosing a bathroom door

At first glance it seems that there is nothing easier to install doors to the bathroom, but this is a specific room with a high level of humidity and a high probability of water penetrating outside. The doorway must close sufficiently tightly at the bottom, while at the same time allowing for sufficient air recirculation and ventilation. It is these features that are important to consider when self-installation bathroom doors.

In city apartments standard layout the doorway has standard sizes. Therefore, the size of the bathroom door, when replacing with a new one, must exactly match the previous model. In addition, you have to change all door frame- in most cases, the design of the new door does not coincide with the old design of the doorway. You can use special solvents to remove old layers from the loot. oil paint or purchase the doors along with the frame.

It is not recommended to install the first doors you come across in the bathroom, especially decorative interior ones - they can warp from excess fumes and lose their attractive appearance. In a room with high humidity, it is best to choose a door leaf made of moisture-resistant laminate or other material that is not afraid of excess moisture:

plastic;
glass;
aluminum;
composite materials.

When installing doors in a bathroom, home mini-pool or bathroom, it is important to take into account the height of the threshold, which is made a little higher than in other rooms. This is important in case someone forgets to turn off the bathroom faucet or there is a water main leak. The high threshold allows you to keep spilled water on the bathroom floor while the water supply is turned off. But the threshold should not be too high to avoid stumbling.

There must be a small gap between the door and the threshold or at the top of the door to allow air flow for sufficient ventilation. Many people know how saturated the air is with steam after taking a bath, but excess humidity is poorly tolerated by people with diseases of the lungs and cardiovascular system. It is for this reason that the bathroom is sometimes equipped with a valve. supply ventilation or leave enough clearance in the doorway when installing a bathroom door.

In a city apartment, the door block of the bathroom is much narrower than in the interior partitions, and in private houses the wall thickness can be arbitrary. Remember that when purchasing a door frame, the structure must be wider than the wall at the entrance to the bathroom or bathroom. Standard parameters doorway - 2.0 x 0.6 m plus threshold. However, when purchasing, it is important to try everything on thoroughly.

Features of choosing a door leaf

To do right choice, first you need to understand what kind of doors there are and choose the most suitable ones for your home. Remember that they should look good from both sides and harmoniously fit into the design of the room adjacent to the bathroom or bathroom. Example decorative doors to the bathroom photo.

There are 2 types of doors:

swing (swing open towards and away from you);
sliding (moves to the side and guide).

There are also single and double doors - they are installed on a wide doorway.

A single swing door is a common type of door for a bathroom or toilet; it opens to the side using a handle. Most often, budget options are of this type, and they are usually installed in city apartments. The choice remains with the material, type of locking mechanism and door leaf design. The swing door to the bathroom opens, most often outward - into the corridor or hallway, where there is enough space for this. Sometimes the door opens into the bathroom, but there must be enough space there.

Also note that there are doors:

rights;
left.

Attention: This is especially important when the apartment or house has little space in the adjacent room. If there is another wall nearby that is perpendicular, then the doors should not interfere with each other when opening.

Sliding doors to the bathroom undoubtedly save space; they are installed where it is inconvenient to use a swing door. Their installation is more complicated, the price is higher, this is due to the expensive roller mechanism and guide fixed in the floor. Most often, their installation is entrusted to specialists. When opened, such doors move along the wall.

Any interior door should fit harmoniously into overall design interiors, so when choosing the style of interiors for the bathroom, it is important to maintain a reasonable balance. If the interior design style of the bathroom and the adjacent room does not radically coincide, then it is better to opt for a neutral option - with modest decor.

Attention: A door made of ordinary, not moisture-resistant materials, on the bathroom side must be coated with a special waterproof varnish or treated with a special compound that increases its resistance to moisture evaporation!

When installing a bathroom door, pre-impregnate natural wood with an antiseptic and a special antifungal compound, especially if it is made of solid wood! Veneered materials are also impregnated with a special composition. interior doors, as well as from chipboard and MDF. This is especially important if the doors for the bathroom or bathroom are made by hand or by special order.

Tip: If you want to order a handicraft bathroom door from a small private workshop, be sure to make sure that it is covered with all protective equipment. It often happens that money is paid, but the work is not completed - no impregnation or special protective treatment was not produced.

When choosing a door, also pay attention to the locking mechanism, since the built-in latch tends to close from the inside - be careful not to confuse it! If a latch handle is not provided, there must be a latch or other internal lock.

Materials for making a bathroom door

1. Plastic doors for the bathroom they are very convenient and aesthetically pleasing, although they are not widely used for this type of room. They are most appropriate for rooms with high air humidity. They are easier to care for - just wipe them when moisture builds up. They are convenient and reliable, and are least susceptible to adverse effects. These are very light doors, so they can also be used for sliding design. They have an affordable price and practical fittings - you don’t have to invent how the bathroom doors should close.

2. Glass doors for the bathroom - practical decorative option. Do not be afraid that they will break; only heavy-duty glass is used for them. Care - wipe off moisture regularly. A glass door has the added benefit of letting in a fair amount of light even if it is opaque. This allows you to further save electricity when using the bathroom during the day. If you are confused that the doors can be transparent, then you can choose frosted, mirrored or corrugated glass: photo.

It is also an inexpensive option, and you can even order such a door from thick frosted or sandblasted glass at the nearest glass workshop. But do not forget to purchase special fittings in advance so that the glazier can design all the holes - for the handle, locking bolts and fastenings. Finished door from decorative glass costs an order of magnitude more.

3. Laminated door with film coating or PVC - excellent performance in protecting against moisture, splashes, drops and fumes. These doors are quite common, they are environmentally friendly and hypoallergenic, and due to their popularity they make up the lion's share of the range of doors for bathrooms and bathrooms.

This door does not deform, is very convenient to use and practical to maintain. Cleaning - with a sponge with any detergent, wipe off moisture with a dry cloth. Decorative properties the doors are also undeniable; the surface copies any texture of natural wood. This is important for decorating the interior of adjacent rooms in a single design, and the prices for these doors are attractive. Budget laminated doors of economy class are presented in a large assortment in all construction supermarkets and online stores.

4. Veneered doors are a coating of wood-shaving “halva” with a thin layer of decorative wood of valuable species. Furniture veneer is beautiful and reliable, the only thing that many manufacturers do not take into account is the practicality of such doors in rooms with high humidity. But if a layer of protective high-tech impregnation or multi-layer water-repellent varnish is provided, then the selected model will be good for adjacent rooms and practical for the bathroom.

5. Doors from natural massif(wood) - good quality, reliable, but everything mentioned about veneer is true for natural wood. Only possible with a reliable protective coating use in the bathroom. Such doors are expensive, they are not available to everyone, but they can be ordered from a carpentry workshop and all stages of impregnation can be monitored. When purchasing, it is important to read the instructions in detail or technical description to make sure it is possible to use a solid wooden door in a bathroom or bathroom.

Attention: In any hardware store Don’t be shy to ask if you don’t understand. It is better to contact consultants for obtaining and general reference information, And detailed description selected door. If the product fits perfectly in all respects for your bathroom, but is a little longer, it can be shortened on a special machine and trimmed. Check to see if this store provides this service. It’s worth asking - how to install a door to a bathroom, do they have a technician come to your home, is this included in the price of the door? If you intend to install the doors yourself, make sure that you do not automatically overpay for their installation.

When installing a door, you need to consider whether it will be for the first time after completing the main stages of building a house, or whether dismantling is required old door? In this case, the process and all stages of installation will be organized differently - installation of a bathroom door video at the end of the article.

There are several options for installing a door, but remember that the bathroom definitely needs a threshold, and if you don’t have one, you should also familiarize yourself with this process in detail. It must be installed correctly and also receive sufficient sealing. Keep in mind that old doors are usually dismantled without the door frame, but if it does not match in style and it is difficult to redo anything, then you will have to remove the entire structure, along with the threshold.

Advice: It is important to eliminate wall defects before installing the door frame, and unevenness and discrepancies at the doorway can be covered with platbands or extensions.

Installing a bathroom door: step-by-step instructions

This is a responsible and time-consuming process, regardless of whether it is a door to a small bathroom or an extensive renovation of a large bathroom or home mini-pool. However, it is not recommended to experiment with this unless you have similar experience and carpentry tools under your hands.

When a door is purchased together with a frame, experts recommend assembling the entire structure on the floor and then installing it in the doorway. Can be purchased now assembled version, when it matches your doorway size - then installation is much simpler:

prepare the doorway;
install the finished structure and wedge it, checking it with a level and plumb line, fasten the wedges between the wall and the door block and the wall;
secure the frame in the doorway with anchors or screws;
fix the structure with foam on one side and place spacers in the box so as not to deform it;
check the verticality of the structure again - this is important when closing the door;
after 2-3 hours the first layer will set, after that polyurethane foam apply on the other side, cleaning off the excess;
seal the threshold on the bathroom side;
cover the mounting foam with the outside decorative elements door frame;
After a day, check the reliability of the installation - the box should not wobble, if this is noticeable, you need to strengthen the fastening to the wall.

Attention: When setting, the polyurethane foam increases fivefold, so it is better to apply it slowly in small portions until the space between the structure and the wall increases. Experts recommend foaming a third of the space. If foam creeps out in unwanted places, you can scrape it off with a knife and wash the surface of the finish with a sting solution.

If the door frame does not require replacement, then the purchased door remains to be fitted to the door frame and hung on the hinges. They are attached to door leaf and a box with self-tapping screws. Usually 2-3 is enough door hinges, but they need to be installed correctly by making indentations with a chisel - watch the video.

In the bathroom or toilet follows a similar principle as for another room, but there are a number of nuances. Between floor covering and the canvas leaves a gap that provides air exchange - ventilation. Be sure to install it to protect the apartment from accidental flooding. If the corridor is very narrow, install the doors to the bathroom and toilet yourself so that the door opens into the bathroom.

When replacing doors in the bathroom and toilet, you need to choose the right design. Considering the specific purpose of the room, a door block is needed that is resistant to dampness and has high sound insulation rates.

When choosing, you should first take a closer look at material:

PVC. A budget option made of plastic has a presentable appearance. The material is resistant to direct exposure to water and can be easily cleaned pollution.

. Not afraid of moisture, looks beautiful, different long term operation. Modern bathroom doors are made of tempered glass, resistant to light hit.

. There is an opinion that it is unwise to install a door to a toilet, especially for a bathroom made of this material. Wood is afraid of dampness, deformed, damaged by mold, and rots. But if in the bathroom good ventilation, and water will not constantly fall on the door, you can also purchase a wooden product.

Chipboard or . Door design beautiful, light, but made from waste wood. In a humid room the canvas will not last long.

The next step is to choose a door for the bathroom according to designs. save space, but sound insulation will be low. More often they prefer a block with a sash. It is necessary to have a threshold in the bathroom, but you should not make it high, otherwise visitors to the bathroom will stumble.

How to install bathroom doors correctly?

Before installing a bathroom door with a threshold, first prepare it. It is important to take accurate measurements before purchasing. For swing doors, the lower part of the door acts as a threshold. However, boxes come with three elements. For such a frame, a threshold is made independently, up to 5 cm high, and the height of the opening is measured from it, taking into account the gap. The door to the bathroom will rise 10 cm higher compared to other interior passages.

The standard height of the canvas is 2 m. The opening to the bathroom is often 1.9 m. It will have to be expanded in height or the door shortened. With glass and plastic models it is impossible to do this. In apartments, the thickness of the bathroom wall often does not exceed 4–5 cm. Cladding ceramic tiles adds about 1.5 cm. The door frame should not exceed the thickness of the wall with cladding. Otherwise, you will have to build up the walls or cut off part of the frame.

Required Tools

For dismantling old bathroom doors and preparing the opening you will need the following tools:

Bulgarian;
perforator;
hacksaw;
mount;
chisel;
hammer.

At installation a new block needs the following tool:

level;
drill;
screwdriver;
chisel;
miter box;
set of drills.

Materials worth purchasing include screws, dowels, polyurethane foam, nails, silicone, and wooden wedges for spacers inside the opening.

Door frame installation

For the bathroom it is installed with a threshold - the lower element of the frame. The jumper creates inconvenience when walking, but it is required for the bathroom. There is no need to install a threshold if there is a difference on the floor between the bathroom and the corridor. However, specially raising the floor is very expensive and difficult. It is easier to install a frame with a threshold.

If the door frame consists of three elements without a lower lintel, the threshold for the bathroom is made from the following materials:

steel;
stainless steel;
bronze;
brass;
aluminum;
tree;
plastic;
concrete.

The threshold of the bathroom must meet the following requirements:

moisture resistance;
wear resistance;
no slip;
aesthetic combination with the box.

If the boat was sold disassembled, all the elements are assembled on the floor. If necessary, adjust the height. The gaps between the canvas and the pan on the sides and top should be 3–4 mm. From below, according to the new rules of GOST 6629-88, the gap between the floor and the canvas is maintained from 17 to 20 mm. The protrusion of the threshold above the tiled floor is made 6 mm. The gap between the lower end of the canvas and the threshold is 6 mm.

On the stand, at a distance of 25 cm from the top and bottom, mark the places where the hinges are attached. Make a selection with a chisel and attach the hinges.

The assembled frame is inserted inside the bathroom opening, leveled, and secured with wooden wedges. The box is secured to the wall with dowels and screws or anchors. After re-check fill the cracks with foam level on one side. At least 3 hours do nothing with the frame. After the foam has hardened, blow out the cracks with reverse side opening, seal the threshold with silicone from the bathroom side.

After 24 hours, they try to loosen the box. The frame must hold firmly in the opening. If the structure is unsteady, additional anchors are driven in.

Installation of door leaf

Begin with . Usually on the door of the bathroom and toilet put a lock, clicking with inside. It is placed at a height of 85–90 cm from the floor.

First, select a groove for the lock at the end of the canvas using a chisel and a drill.
Mark the location of the hole for the handle on the door. It should match the square socket of the inserted lock.
Drill a hole feather drill with a diameter of 20 mm.
The lock is placed inside the groove and secured with two screws to the end of the blade.
A square is inserted into the hole, decorative overlays and handles are put on.
A counter plate is fixed to the frame post opposite the lock with self-tapping screws, having previously selected a groove for the latch tongue.

The location for the loops is marked by placing the canvas in the box. Using a chisel, select grooves under the hinges and screw them in with self-tapping screws. The canvas, complete with fittings, is placed in its permanent place.

Installation of platbands

The final step in installing a bathroom door is. The slats are selected from the same material as the door block itself. Conventional ones made of wood or MDF are attached to the end of the frame with nails, screws, and glued. The upper connection of the planks is made by cutting the edges at an angle of 45 or 90 degrees. Telescopic

The specifics of these premises are high humidity. Therefore, choosing and installing doors to the bathroom and toilet with your own hands differs in a number of nuances. What are the features of their acquisition and installation?

general information

The product range, surface design options, engineering solutions (hinged leaves, sliding doors, etc.), manufacturers are a separate topic. But it’s worth paying attention to this point. Some instructions, which describe all stages of work step by step, note that if there is an effective hood, it is possible to install doors from any materials. How true this statement is is up to the owner to decide, but it is worth recalling something.

Forced exhaust is turned on only periodically, as needed. And dampness, especially in the bathroom, is constantly present.
Quality natural ventilation not least determined external factors– strength, wind direction, atmospheric pressure. In addition, the condition of the ventilation ducts is not always ideal. Not to mention apartment buildings, owners of private buildings, as a rule, do not pay due attention to the regularity of their Maintenance. The result is a decrease in traction and system efficiency.
The location of plumbing fixtures is an important aspect when choosing a door. For example, if the bathtub is located close to the opening (and this is the case in most high-rise buildings), then drops of water will certainly fall on some part of the block.

Conclusion - proper installation of a door to a bathroom or toilet implies choosing not only frames and sheets, but also fittings according to the “moisture resistance” characteristic. First of all, awnings, since their incorrect operation leads to increased wear of the sash.

Installation features

Mandatory presence of a threshold. The minimum height is 100 mm from the floor covering. This is necessary to protect the remaining rooms from flooding in the event of communication breakdowns or plumbing problems. A door with a threshold will temporarily keep water from spreading into adjacent rooms.
As a rule, with separate bathrooms, they are located through the wall (partition). Therefore, the doors are nearby. Their installation is carried out in such a way that in extreme positions the blades do not block each other. There are several options. For example, in one opening there is a hinged model, in the next door there is a compartment. If both doors open, then certainly in different directions.

The gap between the canvas and the threshold is at least 10 mm. Otherwise, even forced ventilation, not to mention the natural hood. Violation of the free movement of air masses contributes to the appearance and intensive development of mold and mildew. Installing bathroom doors without taking into account this fact leads to high costs and time expenditure in the future; It is extremely difficult to rid walls, ceilings, and the contents of a room from such an “illness.”

Advice. It is advisable to purchase doors whose leaves have ventilation grooves (holes, slits). Then you won’t have to lift the sash above the threshold.

Procedure

Removing the old door

In principle, nothing special, but there is small nuance. The box should not be broken out; if it does not give in, then cuts are made in several places, and it is removed from the opening in parts. Passages to bathrooms - in interior walls or partitions. Unlike load-bearing structures, they are not as strong. Excessive efforts and carelessness will only increase the amount of work - you will have to level and strengthen the ends of the walls.

Preparing the opening

Complete stripping down to the base. This will allow, firstly, to determine the condition of the wall and draw up a list of necessary measures. Secondly, choose necessary materials, drugs.
Formation of the opening. Door blocks They have the correct geometry, and therefore significant curvatures and bevels are not allowed at the ends of the walls. In addition, the size of the passage must correspond to the dimensions of the door frame, with only a small difference, ensuring technological gap along the perimeter (recommended within 10 mm).
Processing the base. The fire protection agent and the method of its application are determined by the wall material. One of the effective methods is impregnation; Such preparation for door installation is more appropriate, since we are talking about damp rooms.

Fabric preparation

Marking the frame for installing canopies. Considering the light weight of the doors, two hinges are enough.
Drilling holes.
Attaching hinges to the sash.

It is advisable to equip the canvas with fittings after installing the box; There will be plenty of time while the sealant dries.

Box installation

Markings are made to determine the location of fasteners. This is necessary to ensure that the fixation of the jamb is as reliable as possible. The walls are not uniform everywhere, there may be individual defects, and therefore the anchors must sit “rigidly”.
In the jamb, according to the diagram, holes are drilled for fasteners.
After placing the box in the opening, it is leveled and fixed in the desired position with spacer wedges.
Through the holes in the timber at the end parts of the wall, the fastener locations are marked.
The jamb is removed and drilling is done in the opening.
After installing the dowels, it is returned to its place, it is given the proper position, and the box is fastened. It is recommended to tighten the anchors through one, from different sides. At the same time, the spatial orientation of the jamb is controlled in order to prevent distortions in the structure. Otherwise, it will not be possible to install the door correctly - the door will not close tightly, difficulties will arise with attaching the canopies, installing the latch, and a number of other problems.

Sealing the opening. The gap (around the perimeter) between the box and the wall is filled with polyurethane foam.

Hanging the sash

TO at this stage You can start only after the sealant has completely dried. As a rule, at average temperatures and humidity in the room, a day is enough.

The work is not difficult, but you can’t do it without an assistant. The canvas is raised, the second half of the hinges are aligned with the cutouts in the box, and they are screwed to it with self-tapping screws.

All that remains is to check the correct operation of the door and eliminate any identified shortcomings. Everything else - platbands, finishing of the opening - is at the discretion of the master, based on general style corridor design. By final stage In principle, there cannot be a single recommendation.

Renovating a bathroom requires a certain skill and dexterity. After its completion, it is necessary to carry out the final touch - installation of the doorway. How to install a door to a bathroom? In order to carry out this work, a little responsibility and scrupulousness will be required. First, you need to leave a gap for ventilation of the room between the floor covering and the shower door. Then install a threshold to prevent water from flowing out, for example, during a flood.

Selection of doors

Initially, you should decide on the theme of the door, its design and structure based on the overall interior of the room. In addition, it is necessary to measure the height and width of the openings in advance so that when you arrive at a specialized store you can accurately select the door to the bathroom. Taking into account all the above parameters, you need to select a product from the following materials.

Glass

It is an environmentally friendly material that is excellent in quality. This material is resistant to many negative factors, such as temperature changes or high humidity. In addition, glass does not deform over time, does not transmit noise and retains heat well. It can be different in structure, color, as well as texture or other external signs. Glass doors can be installed with your own hands or with the help of specialists.

Caring for this material is very simple, since glass is not afraid of any chemicals for cleaning with the exception of compositions with abrasive additives. Today, the modern market offers a wide variety of toilet glass to choose from, for example:

matte;
embossed;
tinted;
mirror or simple;
framed with plastic or metal inserts.

In any case, it will be fashionable and stylish door with high performance characteristics.

Laminated MDF and chipboard

Products made from MDF and chipboard are currently one of the most popular options on our market. These representatives excellently withstand high humidity, do not deform under load, and also have affordable price. It is often recommended to install them in the same panel house or other not particularly large buildings, for example, sliding doors. This option will allow you to functionally use the surrounding space.

Plastic

Installing PVC doors correctly with your own hands is not difficult. This material withstands cleaning agents, is resistant to thermal influences, is not prone to deformation, and is not afraid of constant contact with moisture. Plastic doors reliably retain heat and have high sound insulation properties. The modern market offers a wide range various doors from PVC.

They can have different colors, shades, take any shape and size. In addition, if necessary, you can select special coatings that imitate any materials, for example, wood, glass, granite and others.

It is worth noting that in terms of its qualities PVC products only slightly inferior to its direct competitor – glass. However, they have a significant advantage - price.

Wood

Wooden doors are the most common option, however, not for bathrooms and toilets. They are easy to install with your own hands, but their purpose will be completely different. Such material, even when processed with special protective films or the means will not be durable. Wood is afraid of constant exposure to high humidity, so its use for a shower room is hardly suitable.

Tools

Naturally, when installing doors with your own hands, you will need auxiliary tools. Usually there are tools in every house, but taking into account the fact that installation is carried out doorways, then several different types of devices are required than when hammering a regular nail or trimming a threshold in a room.

To install the door correctly and correctly you will need:

screwdriver;
self-tapping screws;
nails for cashing;
miter box;
hacksaw;
perforator;
chisel;
hacksaw;
mounting knife;
building level;
feather drill;
polyurethane foam;
substrates made of wood or plastic;
silicone transparent or colored.

Installation

In order to install doorways, it is necessary to initially distribute the installation stages. In addition, you first need to assemble the entire future structure on a horizontal plane to avoid unevenness and distortions. The primary task is to assemble the box itself, i.e. in fact, the foundation of the future door. After which the door frame is secured into the opening between the rooms. The next important step will be to secure or fix the entire structure with the wall and flooring.

When the doorway is completely secured and in a stable position, then the work is practically done, small but important touches remain. First you need to take polyurethane foam and fill the remaining gaps with it.

This will not only hold the materials together, but also improve the sound insulation properties bathroom. Then they remain decorative works in the form of a sidebar door handles, as well as locks. The finishing touch will be the installation of platbands. Installation diagram: