Azure is a paintwork material that is used to protect wooden products from a wide range of harmful factors. Azure not only protects the wood well, but also stains it without the formation of a film, while an extensive range of shades is available.
What is the difference between lacquer and azure?
Varnishes consist of polymers and resins, as they dry, the solvent evaporates and a film appears. And after applying the azure, the film does not appear, as it penetrates the tree and allows it to breathe. Since the tree breathes, it will not deteriorate even after a long period of time.
There is also a difference between paint and azure, both products contain a coloring pigment, but the paint has a filmy surface and hides the natural structure of the tree, and azure colors, but since it is translucent, it does not hide the texture. Varnishes and azure need periodic updating.
The composition of the azure includes resins, solvents of organic origin, water-repellent elements and coloring pigments that have a high level of UV resistance. Due to this composition, azure is an environmentally friendly product.
Types of azure
Currently, there are such types of azure:
- Thin-layer (up to twenty micrometers). It is a very liquid solution that penetrates deeply into the surface to be painted. Most often, this type is used for sheathing, fences and similar products prone to deformation. Since the azure does not cover the wood, but saturates it, for good protection against moisture and sun rays The coating needs to be renewed frequently.
- Thick layer (more than sixty micrometers). This species does not penetrate deep into the wood and forms a thin film. It is advantageous to use such azure when painting doors, windows and products that are not prone to changing their shape. Unlike the previous type, thick-layer azure protects well from moisture. The coating partially hides the texture of the wood and looks like varnish.
- Medium layer (from twenty to sixty micrometers). This type is very well suited for wood products that are prone to moderate deformation.
It is also worth noting that the azure can be based on water or solvents, transparent or with pigments. In addition, it comes with or without biocides. If there are no biocides, then azure protects better from moisture and sun rays, but worse from fungi and mold. In case you need to get maximum protection from all of the above factors, then before using the azure it is worth applying a special protective composition to the tree.
Azure is applied in several layers, each of them should dry for about six to twelve hours. Complete drying of the azure occurs after six days. One liter of azure is enough to cover ten to forty square meters, in this case it all depends on which view you are using.
If it is necessary to process wood, the consumer is faced with the problem of choice paintwork material. We invite you to pay attention to the azure. This is a unique type of coating, it combines such useful qualities as: surface protection against small scratches, ultraviolet radiation, moisture . In addition, it emphasizes the natural beauty of the surface, some have antiseptic properties. Let's take a closer look.
So what is Azure?
It is a glazing or translucent paint that combines all the advantages of impregnation and varnish. The first thing that catches your eye is the product. does not overlap the pattern of wood. On the contrary, the pattern becomes more textured and contrasting. It contains a coloring pigment, which is translucent.
This material does not contain toxic substances. It is made on the basis of water-repellent components, alkyd resins, coloring pigments and organic solvents. The surface after treatment remains breathable, which cannot be achieved when using varnishes and enamels. Azure can be divided into three types:
- thin layer, the advantage is the ability to penetrate into the deep layers of wood and saturate it due to a very liquid consistency. This allows you to protect the material from sunlight and moisture. There is no film on the surface. It is used for elements that are subject to a strong change in shape. A striking example -
- thick layer, has a thick texture. It does not penetrate deep into the wood, and forms a thin film upon application, it is important to note that, unlike varnishes, the film has breathable properties. Characteristic thick-layer azure, the presence of a strong water-repellent effect, which provides the tree reliable protection. It is used to process elements that are least prone to deformation.
- Middle layer, average in density between the above species. It is used on materials with mild deformation. A striking example -
High-quality azure for a long time protects the surface from deformation, cracks and peeling. The higher the solids content, the more durable the coating.
Important: There are azures for internal and external works. Do not neglect the recommendations. If you are interested in high-quality and long-term coverage, you should pay attention to the scope of the product and use it clearly for its intended purpose.
Let's look at the basics:
- oily has multi-component compositions that protect against the formation of fungi on wood. Ennobles appearance wood, making the surface silky matte, favorably emphasizes the texture of the fibers.
- Having based solvents, maximum resistant to ultraviolet radiation, show a special resistance to weather conditions.
- On water based , in comparison with the previously listed compositions, are characterized by high penetrating power. They have a neutral smell. Recommended for indoor use.
The presence of biocidal additives in the composition will effectively protect wooden elements from decay, blue stain, insect damage and termite damage. On our site you can find high quality products from foreign manufacturers that meet your requirements.
Wood is an attractive but capricious material that requires appropriate care. Manufacturers today offer hundreds finishing materials, so there is no reason to deny yourself the pleasure of enjoying the smell and sight of wood. You just have to get right to repair and finishing works. For processing, wood glazes produced using modern technologies, dozens of items you can find on our website.
Distinctive features of azure
Distinctive features of this type of material:
- protection against decay during the operation of the tree;
- antiseptic effect against insects and harmful microorganisms;
- preservation of the natural texture of wood;
- saving money and time on finishing work.
We can help you with home renovations. We present products of foreign manufacturers - Remmers, Ramsauer, STO, Zobel, Adler and some others trademarks. Certified varnishes and paints will allow you to achieve the expected result at minimal cost.
What is azure and operational features
Not everyone knows what azure is for wood, what properties it has. It is possible to process wood not only with the help of varnishes and paints. Specialized wood glazes are an antiseptic that can extend the life of the surface. It becomes resistant to negative influences.
Another important quality is the absence of a film on the surface after application. This azure differs from varnishes and paints for wood. They give a matte shine and emphasize all the features of the texture. With hundreds of shades of azure to choose from, this is an excellent option for any design project.
There are hundreds of products on sale, so make right choice extremely difficult. If you turn to us for help, then count on full support and advice on all issues. We offer glazes for wooden surface, to protect the ends, for interior and exterior decoration.
Dozens of products from trusted brands
Attention is always paid to product quality. Before going on sale, it is tested and certified in accordance with the requirements of GOST and ISO. We take full responsibility for the final result. Take a look at our catalog of azures for wooden structures, choose suitable means, arrange delivery in Moscow and the region from 500 rubles by phone or directly on the website.
Any product needs processing, thanks to which the appearance is preserved and protected from the effects of harmful factors.
For outdoor solid wood building elements, moisture and other factors become the first source of destruction. Paints and varnishes are used as protective agents, they protect wood from sunlight, moisture penetration, fungi and other destroyers. But many do not know which azure is better for wood.
What is azure
This word should be understood as a product necessary for processing products. It is not afraid of atmospheric conditions, it is considered a dirt-repellent composition, as well as water-repellent. The substance has elasticity, is not subject to abrasion on the surface.
Great for wood that has a soft and hard texture. For interior decoration composition is used white color. Great option considered for decoration frame structures, doors, windows, fences.
Translucent, as well as glazing paint, intended for the array, is called azure. One of the important properties of the coating is elasticity. After processing the material, the mixture does not form a thick film on the surface, it does not exfoliate over time and does not form peeling.
After a few years, the treatment holds and loses its attractive appearance. One of the following properties is translucency. Processing the texture of wood, the coating does not spoil the beautiful pattern of the array.
Several different types of azure
Among the surface coatings, three types of azure are distinguished. Each type is equipped with individual qualities and properties:
thin layer- is a fluid component that penetrates the tree without forming a film. This processing does not form delamination, the material is subject to repair. The coating is suitable for elements that can change shape, usually fences, as well as plank sheathing, are covered with this type of azure.
Middle layer- it has properties that thick-flowing and liquid-flowing impregnation does not have. The penetration of this material is fast and efficient. After that wooden material does not pass moisture. Azure is great for wooden elements that need protection and have moderate deformation. This composition can process shutters and frame structures.
thick layer- the material is film-forming, as well as densely flowing. Thanks to the azure treatment, the base is protected from liquid penetration. This composition most often covers the surface of windows, as well as doors.
How is the application of azure
It is not difficult to paint the surface with a mixture. Before processing, the material must be prepared, then the container with impregnation should be opened. The composition is applied to the surface several times.
How to process wood. Before processing, the material must be free of moisture, free of foreign matter, it must be deresined and then sanded.
How to apply azure correctly
The contents in the container are shaken well before use, if foam appears, remove. To apply the composition to the surface, it is recommended to use a brush or spray gun. Azure must be applied to the array in several layers.
The distribution of the ingredient should be the same, you cannot apply a large layer at a time. Subject to all the subtleties, the wood will have a neat appearance. The texture of the blue is liquid and viscous, it does not take much time to solidify. In the event of inaccuracies, it is necessary to have time to correct all the irregularities. The tree needs to be processed several times.
The mixture must be applied until the desired color appears. Layers are applied gradually and between them it is necessary to wait from 6 to 12 hours. The best breaks are 12-24 hours. After 6 days, the azure on the array dries completely.
How much azure you need to spend:
To process 1 layer, you need to use 1 liter for 10 - 14 squares. Further, the layers are processed in the amount: 1 liter of the composition must be used for 35-50 squares. If the temperature has dropped to 12 degrees with painting, it is better not to rush.
Before processing new layers, old painting must be removed. Sometimes the composition is used to give an aged look to the product, this method is called brushing.
The mixture is not considered combustible, but after impregnation of the product, whether the rags may ignite spontaneously. Therefore, after work, the materials must be dried.
To protect the product from moisture penetration or to prevent the development of decomposition, it is necessary to use a coloring composition. At the same time, the beauty of the texture is well preserved. Depending on varnishes and paints for wood products, azure is considered worthy alternative. Among the other components, plots and houses are treated with the composition, since azure, in addition to decorative functions, performs protective ones.
How to store
To store the substance, it is necessary to provide a cool dry room with good ventilation. A film may form on the surface of the composition, so it must be removed before use. After the mixture has stood for a long time, it is recommended to mix it before use and then filter it.
Precautions
After working with the composition, clothes, as well as rags and sponges, must be dried by spreading out on metal surface. All items can be washed with water and then dried using a non-combustible surface. The substance must be kept away from children.
Use the product only in enclosed spaces that are well ventilated. IN environment the composition is strictly prohibited to pour. Follow all the rules that are indicated in the instructions.
Before you start working with the azure, you should familiarize yourself with these recommendations. The natural components contained in the composition of the product may have a specific characteristic odor.
[ Click on photo
for increase ]
The opportunity for this was created by the fact that paints began to be produced industrially. At the present time, you can buy paints, varnishes and azures for every taste.
Durability is the advantage of varnish. The varnishing process includes 3 stages:
- Primer with special means (in order to protect from weather influences).
- Intermediate grinding (used sanding paper grit 180).
- Just varnishing.
Since the lacquer contains a sufficient amount of colorants and after drying it forms a film of synthetic resins, it strongly protects the wood from water and ultraviolet rays.
But due to the fact that the varnish cracks, the surface is subjected to intermediate grinding and varnished several times. Cover old surface fresh varnish can be about 4 times, after which you will have to carefully scrape off old layer and treat the surface in a new way.
In coating with azure, a coating is distinguished in a thin and thick layer. If covered with a thin layer, the pattern of the wood structure will remain visible, since a relatively small part of the dyes is contained in a thin layer. The wood is only impregnated, not overcoated. But such impregnation will not be able to prevent wood from stagnant moisture and ultraviolet radiation for a long time. It must be remembered that it will have to be updated regularly.
You can cover the old surface with fresh varnish about 4 times, after which you will have to carefully scrape off the old layer and treat the surface in a new way.
When covered with thick paint or azure, the situation will be different. Due to the high content of coloring substances, they are similar in their properties to varnish, while forming on the surface protective film. As a result of this property wooden frames protected from moisture and sun. Here are just a picture of a tree you can hardly see. When you cover with a thick layer, you need to subject the surface to intermediate sanding and varnish several times. When opening, be sure to treat the entire surface with a wood preservative.
Important: a layer of paint, varnish or azure must have the ability to transmit evaporation. Leading manufacturers of these materials offer such qualities today.
Azure is such a transparent coating, after which the pattern of the tree structure will remain visible. Unlike it, paints and varnishes have a relatively greater covering power. And it is thanks to this ability that they better protect the wood. Doors and horse frames must be protected from moisture. When choosing a material, it is necessary to take into account the level of humidity. Since a thin layer of azure is not able to adequately protect the wood from moisture, use it in rooms with high level humidity is not recommended.
Technologies
Working with oil paint
If you have to work with oil paint, be sure to use useful advice given by painting professionals
Removing old oil paint: ways
When starting repairs, many are faced with a choice: peel off the old paint or restore the ceiling or walls on top of it.
Removing old paint from window frames
Many had to deal with the problem of removing old paint With window frames. This is a difficult task, especially when several thick layers of enamel have been applied to the wood.
Preparing texture paint yourself
Originally, sand was added to the paint to texture the ceiling and to hide drywall defects. Today, texture paints are used on walls and ceilings to give them unique design
What paint to choose for painting a concrete floor?
Concrete is the main material distinctive feature which is the increased mechanical strength
Features of applying rubber paint: tips and tricks
Variety today building materials is such that the average buyer who enters the store simply does not recognize many names
How to dilute acrylic paint?
acrylic paint has a very important quality - absolute environmental cleanliness. It is easy to apply to any surface, dries quickly and adheres well without flaking.
