To everyone who has manual frezer, sooner or later the idea comes to mind to make a table for him to turn him into a full-fledged stationary machine, with which you can implement all the functions embedded in it. The same thought once came to me too. I will not dwell on the moments of making the table, there is plenty of information on this topic on the net for every taste and budget. I want to bring to your attention my own version of the elevator for raising and lowering the router relative to the table surface. The design is as budget-friendly as possible, you don’t need to buy anything, everything you need for manufacturing is in every home workshop.

So what do we need:
- wooden rail capable of supporting the weight of the router
- bolt with a diameter of 10-12 mm
Metal bar with a diameter of 5-7mm and a length of 100-120mm
-whatever the hinge (door hinge) according to the size of the rail
-old hand drill

From the tools you will need a tap, a die, a grinder, a screwdriver, self-tapping screws, drills, etc.
Let's make a nut first. We cut off from the bolt that part on which there is no thread, we will make the length according to the width of the rail. In the middle of this workpiece on the side surface, we drill a hole slightly smaller in diameter than the size of the bar (taking into account further cutting of threads on the bar and in the hole).

On the bar we cut the thread along the entire length, we make the corresponding thread in the body of the workpiece cut off from the bolt. As a result, we got a home-made guide screw pair.

After that, we drill a hole in the rail for our home-made nut (the nut should move freely in the hole, but not hang out in it). We drill another hole perpendicular to this hole, according to the diameter of the bar (a little more is possible). At the other end of the rail we fix a suitable loop (hinge).

Now we insert our nut into the rail, screw a threaded rod into it, clamp the rod into the drill chuck, fix the drill at the bottom of the table front side. We fix the other end of the rail with a hinge on the opposite side. As a result of all manipulations, a structure should be obtained that moves the milling cutter vertically when the drill handle is rotated. I don’t indicate any sizes, because all this is fastened as they say "in place, how to ask"

As an illustration, I give photos of how it was done with me. Dimensions can be any, I want to believe - the design principle is clear.

Thank you for your attention.

By using milling table can be performed professional processing tree. Connections, end profiling, door and window frames, plinths, frames for photographs and paintings are made neatly and conveniently on the table. A factory-made table can fly into a pretty penny with dubious quality. Why not make it yourself? Moreover, the design is not at all complicated, further drawings will be disassembled in detail.

The main parts of the milling table

homemade router table

There are many options for milling tables. As a rule, masters create unique blueprints to suit your needs. But the basic design is the same regardless of the size of the machine. Here is a table 90 x 48 x 30 cm, top and supports made of plywood No. 27, workbench legs welded from a steel corner.

The main elements of the table for a manual router, the quality and design of which will determine the convenience of work and functionality.

First you need to decide on the type of future machine:

If you plan to work on the road, a small drawing will do. portable design. With constant work in the workshop, it will be convenient to be reliable and powerful stationary table. It can be mounted on wheels and moved around the room. And for a small workshop, the aggregate version is good, it is an extension of the tabletop of the saw machine or its rotary version.

Cover material

The most practical countertops are made of chipboard, pasted over with thin plastic or MDF with a melamine layer. Such material is very easy to cut with a jigsaw, and it will last a long time.

Pressed worktops are not suitable for work in damp rooms and outdoors! So that they do not swell, all edges will have to be carefully processed and sealed.

Very good homemade countertops from plastic sheets. They are smooth, even and easy to work with. Such a machine can be used in any conditions.

Metal countertops are harder to make, they are heavy. A aluminum sheets it is necessary to additionally clad - cover with a layer that prevents contamination of parts.

Stop groove

Typically, a milling table is used for processing longitudinal edges. To be able to process the transverse ends, when creating homemade machine it is necessary to provide a movable stop that moves in the groove. The built-in groove is also used for mounting clamping devices.

Fixing the router

There are two options for attaching a hand router to a table:

directly to the bottom surface of the countertop;
to the removable mounting platform.

When making a do-it-yourself milling table, they often use the first method, as it is simpler. But the mounting plate equipment has a number of advantages in operation:

up to 1 cm of the depth of processing of the part is released;
the router is easier to remove for changing cutters.

Therefore, we recommend to tinker a little longer and equip the mounting plate. It must be flush with the surface of the countertop, otherwise the workpiece will touch the protrusions. Even more convenience is provided by a cutter elevator, the design of which will be discussed in detail later.

Longitudinal stop

It serves as a guide for the part, so it must be even. You can make an emphasis with a T-slot, into which clamps and other devices are inserted to facilitate work.

Homemade table

The most primitive drawing homemade table for a router - this is an MDF tabletop, in which a hole is made for the passage of the cutter and a guide ruler is attached - an evenly planed board. Such a tabletop can be placed between two workbenches or installed on its own legs. Its advantages are in the simplest and quickly manufactured design. Do serious woodwork similar device unlikely to allow. Consider more functional options, including swivel.

Small milling table

neat and small table

A desktop model for a manual router, which you can make yourself in a few evenings. Lightweight construction and mobile, fits on a shelf, takes up little space, and its drawings are simple.

The working surface and side racks are made of thick laminated plywood No. 15. Tabletop size 40 x 60 cm, height without corner stop 35 cm, stop height 10 cm. Three grooves are selected in the surface of the desktop for installing rails. Various auxiliary devices are installed here and moved along the countertop.
To make the structure stable, the legs are made of chipboard or MDF No. 22. The legs are placed with a slight indent, leaving some space for attaching templates, clamps with clamps.
To cover the mechanism, a front panel made of plywood or chipboard is installed from below.
For the side stop, grooves are provided along which it moves. Locks in the right place with the help of bolts with wing nuts. The emphasis can be dismantled and installed on the vacant place any convenient device.
A branch pipe is connected to the stop for removing chips, which are released in abundance during operation. Chip deflectors for router and table through plastic corrugations from sewer siphons are combined with a splitter for water supply. A hose from a household vacuum cleaner is attached to it on a clamp. It turns out a very effective system for removing chips, it practically does not scatter around the room.
Since the machine is designed for a hand router, a special on-off toggle switch is not required.
The stop consists of two parts, which approach or move apart depending on the diameter of the working body. A wing nut is provided for fastening the sash. The proposed model is good in that the tool can be easily removed from the bed to replace the cutters.
The mounting platform for the router is made of textolite or plexiglass. Pre-dismantled plastic playground from the cutter kit. The recesses for the mounting site are selected with a milling cutter, and the hole is cut with an electric jigsaw. When the hole is ready, the plexiglass is adjusted to its size and shape. It should fit tightly and without protrusions into the window.

You can make several mounting pads of the same size with holes for different cutter diameters.

This option is great for little ones. hand tools. If a stationary table is made for a large milling cutter, insert rings are attached to one mounting platform for different cutter diameters.

To ensure that the workpiece moves smoothly, movement stops are installed on the side stop. Also, clamps are attached to the side stop, which hold the part near the cutter during operation. Additional Convenience create a sled along which the workpiece moves at a right angle. And to make work safe, pushers are made.

The table is ready for use, its disadvantage is the lack of adjustment of the working depth. This is done manually, by pressing on the tool. From the first time it is impossible to "get" into the desired depth. Therefore, we recommend equipping the table with a lift.

A hole must be made in the bed where the adjusting bolt with a wing nut is inserted. The depth of milling is smoothly changed by twisting the lamb.

Some craftsmen fit old car jacks under the elevator for a powerful router. The device is attached under the router, a hole is made in the side wall to bring the jack handle out. The handle of the jack can be bent under right angle, during rotation, the router moves up and down smoothly in 2 mm increments.

Another model of a homemade milling table for a router in a video:

Examples of milling table designs and their drawings

Construction 1

Construction 2 with drawings

Lifting mechanism for manual router

Elevator for milling cutter. Part 1 Diy Made Router Lift – AgaClip – Make Your Video Clips

What operations can be done using manual milling machine— MASTREMONT.RU

Universal Diy Router Table

manual milling machine on wood VK

Homemade lift lift for router – AgaClip – Make Your Video Clips

Elevator for milling cutter. Part 2 Diy How To Make Router Lift – AgaClip – Make Your Video Clips

Do-it-yourself elevator for a router: the principle of operation, product examples

Do-it-yourself milling table for a manual router - drawing, video, instructions o-builder.ru

Do-it-yourself table for a manual router: instructions (video)

Do-it-yourself milling table with an elevator for a manual milling cutter drawings

Elevator for router Elevator to the router

Do-it-yourself wooden machine for wood

Homemade wood cutters for a manual router

ElkoPro. Assembly and use instructions

DIY wood router templates

Lifting mechanism for milling machine

MILLING TABLE with your own hands. Discussion on LiveInternet - Russian Service of Online Diaries

GNTI - Homemade milling table - Video reports from the world of science and technology

Panel saw Italmac Omnia-1600 — buy, prices in the online store TechnoSnab

Milling machine software, textures, icons, images

If you regularly use a router installed in a router table, you know how difficult it is to adjust and adjust the height of the router bit in the router. There are also milling lifts for lifting the router, but they are usually quite expensive. So I created a simple homemade router elevator from available materials. This lift saves a lot of time and I find that all router adjustments are much easier to do effortlessly using the lift installed under the router table.

To make an elevator, I took steel pipe 3/4 diameter? (nipple length will depend on the size of your router) then did you make an angled coupler and a second 3/4 nipple? connected to a flange (the length of the nipple will also depend on the size of your router table), as shown in the drawing below.

Then did wooden base to support the cutter. I drilled a 3/4 hole in the base. This hole is used to smoothly slide the base over the nipple. The clamp is screwed to the base and serves as an adjustment mechanism. I then installed a router lift under the router table (see photo).

To get maximum adjustment, be sure to set the router lift to its lowest position. The curved clamp handle makes it easy to adjust the router and move up and down the steel nipple. This makes it easy to adjust the router to any position you need.

Elevator for a milling cutter from a candle key

The router lift is an extremely important and useful tool. This is a quick and convenient way to adjust the cutting height of the cutter. Correct installation depth of cut will not only create cutting accuracy, but also simplify the fitting of product joints.

I made an elevator for the router from a regular candle wrench for a car and a suitable nut. The nut must match external dimension candle wrench, and the inner diameter of the nut is the size of the bolt used.

Using nylon or other soft material, drive the nut into the bottom of the wrench. handle on reverse side I made a candle wrench for ease of adjustment. A nylon retaining ring between the nut and the base of the router will help prevent it from spinning freely during operation.

This router lift can be used on various handheld routers such as Hitachi, Festos, Mafells, Dewalt, as well as small Bosch models.

An essential requirement is that you need to consider the location of the bolt on the base of the hand router, its length and easy access during operation.

Note: The easiest way is to use a nylon insert nut inside the wrench.

Make a lift for a router with your own hands, or buy a ready-made one? Let's answer this question.

When using a manual router installed in a stationary table, two questions arise:

How to adjust the depth of immersion (departure) of the cutter.
How to quickly change replacement tips.

Every time unscrewing the tool from the plate is too troublesome. In addition, a statically fixed router only works at a fixed depth in the workpiece.

This problem is solved by installing a suspension with adjustable height on the router. And as soon as you were able to make a full-fledged milling table, installing an elevator of your own design is not difficult at all. In addition, a self-made device is developed taking into account all the requirements of the master, even those that are not provided for by the factory device.

Why do you need a lift on the milling table, and can you do without it?

This useful device called the third hand of the master. Those who have tried a milling cutter with a microlift find more and more new applications for it:

Maintenance of the power tool does not cause difficulties, as well as the operational change of milling cutters.
You can change the height of the milling cutter in a matter of seconds, and most importantly - safely.
You can change the immersion depth "in dynamics", simultaneously with the movement of the workpiece on the table. This expands the possibilities of creativity.
Due to the fact that you stop regularly dismantling the tool for maintenance, the plate and its fasteners are subject to less wear.

Buy or make your own?

There is a wide choice of offers in the power tool market. Industrial microlifts look solid, work without failures, but their cost is like that of a new milling cutter. True, the device is quite well equipped. The kit includes rings for copy sleeves, and a very high quality mounting plate.

Industrial microlift for a router with a set of copying rings

It remains to electrify the device - and you can get a CNC machine. There is only one drawback, but it outweighs all the advantages - the price itself. Therefore, for a periodic home use it is an unaffordable luxury. So our kulibins are making, who is into what much. However, they have a lot to learn.

There are quite primitive lever-type designs

Homemade elevator design with lever mechanism

This technique allows you to use even a "foot" drive. For precise settings it is not suitable for departure, however, with the help of such a mechanism, it is possible to raise the router to its working position in one movement, and just as simply lower it to change the nozzle or service. This lift has a fairly large stroke, it does not allow for adjustable milling. Materials for manufacturing are literally lying underfoot, the cost price tends to zero.

Using the screw adjuster

Another example of a homemade elevator for a router

The design is more advanced, and allows for relatively precise reach adjustment. However, it is inconvenient to use such a microlift; to rotate the handle, it is necessary to climb under the table, and then make a control measurement of the height of the cutter. But reliability is on top, and expensive materials are not required for manufacturing. Such an elevator can be made "by eye", without using drawings.

The following flywheel design not only makes it possible to fine-tune the reach in small steps within 50 mm, but is also quite convenient.

Flywheel lifting structure

It will take more time to make, but the result is worth it. The handwheel allows you to adjust the height of the cutter, while visually controlling it over working surface. In principle, it is already possible to dynamically change the overhang of the cutter.

The main advantage is still the low cost of components for manufacturing, with increased functionality. Instead of a flywheel, you can install a gear and a motor with a gearbox. But this will require additional costs.

Car jack option

Quite expensive, since at least you need to purchase a jack. Rhomboid designs are ideal.

Application screw jack as an elevator for a milling machine is also possible

Such a lift for a microlift is reliable, and thanks to the handle located parallel to the tabletop, it is convenient and quite accurate. Positioning the mount is very easy. It is enough to install a solid shelf parallel to the countertop.
Electric variant available.

Then, in general, you can install a foot pedal, and free both hands. And if you attach a programmer to all this - here's a homemade CNC router for you.
However, this comes out of the concept of an economy class device.

Option from an advanced master

Since the possibilities of a craftsman are endless, you can meet completely unexpected designs. This microlift is made using the same router for which it is intended.

original design elevator made by hand

The design involves not only fine adjustment of the reach, but also a change in the angle of inclination of the axis of the router. With this potential, it is possible to greatly expand the woodworking tasks performed.
Originally solved drive worm mechanism studs - height adjuster.

Toothed wheels (gear wheels) are made according to the spike method " dovetail". This allows the gears to be moved outside the mechanism, eliminates the need for lubrication, and makes the adjustment soft.
The material used is moisture resistant plywood 20-25 mm thick. The microlift is executed so qualitatively - that I would like to suggest the author to organize industrial production.
Of course, a preliminary drawing is necessary for such a design.

Assembly drawing in 3D for microlift

Moreover, it was made using a three-dimensional modeling program. Making such a device is hard work. And here financial side question - the cost of a sheet of plywood and a screw stud. When performing custom work, such a design will quickly pay off.

The verdict on this topic is as follows - when using a home-made milling table, you cannot do without a microlift. Other designs such as a quick-release plate for a router or flip cover table, suitable only for servicing power tools. And for precise positioning of the cutter above the table, you need a microlift.

Elevator for a milling cutter: several do-it-yourself manufacturing options

The elevator for the router, which can be purchased in a serial version or made by yourself, is a device that allows you to improve both the quality and accuracy of the processing performed by hand-held power tools. The results of the latter strongly depend on how accurately and confidently the user manipulates such a device. In order to minimize the influence of the human factor on the results of processing performed by a manual router, special devices have been developed.

Homemade elevator for a manual router, made of plywood and timber

One of them is mechanized lifting device for a milling power tool, which, in full accordance with its functionality, is called an elevator. As mentioned above, such a device can be purchased in series, but it will not be cheap, so many home craftsmen successfully make it with their own hands.

Why is such a device necessary?

Elevator for a milling cutter, with the help of which the exact movement of a hand-held power tool fixed to it is ensured in vertical plane is needed in many situations. Such situations, in which the quality and accuracy of processing wood products are of great importance, include the decorative finishing of furniture panels, the execution of technological grooves and lugs on the elements of furniture structures. The quality of processing in such cases will not depend on the experience of the master performing it and the hardness of his hands, but only on the accuracy of the settings of the device and the degree of its stability.

Even a person with good physical fitness, when working with a manual router, the weight of which can be 5 kg or even more, gets tired hands. This directly affects the accuracy and quality of work. In addition, such processing accuracy, which is capable of providing a hand mill mounted on an elevator, cannot be obtained when manipulating a power tool manually.

For most routers, regular adjustment when installing a tool in a table becomes simply not convenient.

To the necessity of inventing such useful device, which is a router elevator, has led to the fact that a variety of types decorative finishes wood products has expanded significantly, technological methods of processing have become more complicated this material, as well as increased requirements for the accuracy of its implementation. All of the above factors require that manual milling electrical equipment combines the high mobility of its working body, as well as the accuracy of its movements. It is precisely these requirements that the elevator for the milling cutter fully meets, with the help of which the used power tool quickly rises and falls to the required height above the desktop, and is also held at a given level for the required amount of time.

Ease of use milling lift It also lies in the fact that each time you do not need to install a power tool on such a device. This contributes to both simplifying the production process and increasing its productivity.

On what principle does the elevator for the milling cutter work?

To raise or lower the router using the router lift, you can use a crank, lever, or any other suitable lifting mechanism. This functionality, which the elevator for the router has, is provided by:

fast and accurate dimensioning of grooves and other relief elements cut on the surface of a wooden blank;
the ability to quickly change the tool in the milling chuck.

If we summarize the design options for the most used models of milling elevators, then the principle of operation of such a device can be described as follows:

A base plate for a router is mounted on a desktop or workbench, which is made of a sheet of metal or textolite.
Two racks are fixed on the base plate, arranged in parallel.
The hand mill itself is installed on a special carriage, which has the ability to move freely up and down along the racks installed on the base plate.
The carriage with the milling power tool installed on it and the entire elevator move to the required distance due to the fact that they are affected by a special pushing device.

The use of metal parts in the design will significantly increase the accuracy of the homemade milling elevator

Consider the basic requirements that should be followed when planning to upgrade the router with your own hands using an elevator.

The frame for placing the router and all other structural elements of such a device must have high rigidity. Compliance with this requirement will not only improve the accuracy of processing, but also make the user's work safer.
The lifting system with which such a device is equipped must be designed in such a way that it can provide not only a quick removal and installation of the used router, but also a quick replacement milling heads On him.
The working stroke of the milling lift should not be made too large, it is enough if the working head of the power tool moves within 50 mm. This is quite enough for the high-quality performance of most technological operations.
When developing drawings, it should be provided that the working head of the power tool used can be rigidly fixed in a given spatial position.

The simplest milling lift can be made from a jack or from a tubular clamp

What is required for the manufacture of a milling elevator

In order to make your own milling lift, you must prepare the following set Supplies, tools and technical devices:

directly the manual milling cutter itself, from which it is necessary to dismantle the handles;
electric drill;
standard car jack (if lifting mechanism fixtures will be of a jacking type);
sheet of metal or textolite;
square wooden bars;
aluminum profile;
sheets of plywood and chipboard;
guides made of metal;
threaded stud;
Screwdriver Set various types and size spanners and pliers;
drills of various diameters;
bolts, screws, nuts and washers of various sizes;
epoxy adhesive;
square, ruler, measuring tape.

In general, only the engine and racks can be used from the milling cutter, especially if the tool does not differ in high travel accuracy along telescopic guides

Possible options for the design of the device

To date, home craftsmen have developed many designs of milling elevators, but the most popular and, accordingly, noteworthy are two options for manufacturing such a device:

an elevator for a manual milling cutter, driven by a car jack;
device, structural elements which are the platter, threaded stud and flywheel.

Option one. Jack lift

The principle of operation of the jack milling lift is based on the fact that the working head of the hand mill, fixed on the base plate, is raised and lowered by controlling the jack built into the structure.

Milling table with jack lift

Do-it-yourself jack milling cutter is made as follows:

A box made of 15 mm plywood or chipboard is attached to the bottom of the desktop, which will simultaneously act as a supporting device and protective cover for the entire fixture.
In inner part such a box, the dimensions of which should be preliminarily calculated, is placed both a jack and a hand mill connected to its moving part. The jack, when placed in the box, is screwed with its sole to the underside of the support casing, and the hand mill through a special metal sole is connected with its upper part to inner surface workbench tables. At the same time, the tabletop performs through hole, through which the working head of the milling cutter with the tool fixed in it must pass freely.
As a base plate for installing a router, which, under the influence of a force from a jack, moves in a vertical direction along two fixed racks, a sheet of textolite or metal of the appropriate size is used.

Option two. Elevator with threaded rod

The scheme for manufacturing a fixture using a support disk, a threaded stud and a flywheel is as follows:

A circle is cut out of a board with a thickness of 18–20 mm, which will act as a support platform for a manual milling cutter.
A hole with a diameter of 10 mm is drilled in the central part of the platter, into which a threaded stud of the same diameter is inserted. The length of the stud, which is connected to the support platform with two nuts and washers, must be selected in such a way as to provide the router with a working stroke of at least 50 mm.
The lower part of the stud, passed through the plywood bottom, fixed between the legs of the desktop, is connected to the disk flywheel. Note that a flange nut must be inserted into the hole in the bottom through which the lower part of the stud will pass. It will ensure the operability of the lifting mechanism.

Scheme of an elevator for a router using a threaded stud

Option homemade elevator with threaded stud

Using milling lifts in conjunction with mechanisms that will additionally provide lateral movement of the power tool, you can make an even more functional device that will turn your manual equipment into a full-fledged 3D milling machine.

Option three. Elevator with chain drive

This milling lift will take much longer to make, but the result is a well-functioning system for raising and lowering the tool.

Milling elevator with chain transmission

Textolite sprocket Mounting plate Chain drive
Chain Tensioner Switch Pusher Push Button Lever

Design this option milling lift is discussed in detail in the video review below.

1 Why do I need a lift on the milling table, and can I do without it?
2 Buy or make your own?
3 There are quite primitive constructions lever type
4 Using the screw adjuster
5 Car jack option
6 Option from an advanced master

How to adjust the depth of immersion (departure) of the cutter.

How to quickly change replacement tips.

Every time unscrewing the tool from the plate is too troublesome. In addition, a statically fixed router only works at a fixed depth in the workpiece.

Why do you need a lift on the milling table, and can you do without it?

This useful device is called the third hand of the master. Those who have tried a milling cutter with a microlift find more and more new applications for it:

Maintenance of the power tool does not cause difficulties, as well as the operational change of milling cutters.
You can change the height of the milling cutter in a matter of seconds, and most importantly - safely.
You can change the immersion depth "in dynamics", simultaneously with the movement of the workpiece on the table. This expands the possibilities of creativity.
Due to the fact that you stop regularly dismantling the tool for maintenance, the plate and its fasteners are subject to less wear.

Buy or make your own?

Industrial microlift for a router with a set of copying rings

It remains to electrify the device - and you can get a CNC machine. There is only one drawback, but it outweighs all the advantages - the price itself. Therefore, for periodic home use, this is an unaffordable luxury. So our kulibins are making, who is into what much. However, they have a lot to learn.

There are quite primitive lever-type designs

Homemade elevator design with lever mechanism

This technique allows you to use even a "foot" drive. It is not suitable for precise departure settings, however, with the help of such a mechanism, it is possible to raise the router to its working position in one movement, and just as simply lower it to change the nozzle or service. This lift has a fairly large stroke, it does not allow for adjustable milling. Materials for manufacturing are literally lying underfoot, the cost price tends to zero.

Using the screw adjuster

Another example of a homemade elevator for a router

The following flywheel design not only makes it possible to fine-tune the reach in small steps within 50 mm, but is also quite convenient.

Flywheel lifting structure

It will take more time to make, but the result is worth it. The flywheel allows you to adjust the height of the cutter, while visually controlling it above the work surface. In principle, it is already possible to dynamically change the overhang of the cutter.

Car jack option

Quite expensive, since at least you need to purchase a jack. Rhomboid designs are ideal.

The use of a screw jack as an elevator for a router is also possible

Option from an advanced master

Since the possibilities of a craftsman are endless, you can meet completely unexpected designs. This microlift is made using the same router for which it is intended.

The original design of the elevator made by hand

The design involves not only fine adjustment of the reach, but also a change in the angle of inclination of the axis of the router. With this potential, it is possible to greatly expand the woodworking tasks performed.
The drive of the worm mechanism of the stud - the height regulator was originally solved.

Gears (gear wheels) are made using the dovetail thorn method. This allows the gears to be moved outside the mechanism, eliminates the need for lubrication, and makes the adjustment soft.
The material used is moisture resistant plywood 20-25 mm thick. The microlift is executed so qualitatively - that I would like to suggest the author to organize industrial production.
Of course, a preliminary drawing is necessary for such a design.

Assembly drawing in 3D for a microlift

Moreover, it was made using a three-dimensional modeling program. Making such a device is hard work. But the financial side of the issue is the cost of a sheet of plywood and a screw stud. When performing custom work, such a design will quickly pay off.

The verdict on this topic is as follows - when using a home-made milling table, you cannot do without a microlift. Other designs, such as a quick-release plate for a router or a folding table cover, are only suitable for servicing a power tool. And for precise positioning of the cutter above the table, you need a microlift.

"Labels are not important, consumer properties, convenience and reliability are important. At the same time, the most important reliability is the reliability of your supplier." © (经验丰富的圣人)*

Preface.

One good man said: “My purely personal opinion, any lift on the milling table is a beautiful, but not mandatory, “gadget.” Much more important is the ability to very quick installation(removal) of the router on the table (from the table). For this, I need to unscrew only one "lamb". "Perhaps, it is a pleasure for someone and it seems convenient to carry a router from the table and to the table. Just as it is probably convenient to have the pleasure of removing the wheel from the car to inflate the wheel - this But there are other opinions about what is a milling lift and what is a comfortable milling table in general.

A milling lift is not a beautiful lotion, but an extremely useful and easy-to-use design, fixture and tool. Top Models milling lifts help to very quickly raise and lower the router in the table, quickly change the cutter and quickly, simply and very accurately set working height cutters. At the same time, you do not need to remove the router from the table at all, except when you use one router for all occasions. But the elevator has nothing to do with removing the installation of the milling cutter in the table. Although I can’t help but notice here - having one set of wheels for two cars - this, too, probably, will seem convenient to someone.

What is a milling table.

A milling table (or table for a router) is a structure consisting of a table base and a tabletop (table surface) with a router installed in it. In this case, the milling cutter, in most cases, is located vertically, that is, it is turned with a collet with a cutter up, although there are designs of milling tables with a horizontal position of the cutter and tables with the possibility of tilting the cutter. Here we are looking at a milling table with vertical arrangement cutter in it.

It is quite possible to make a table for a router with your own hands, but it is advisable to know about the existing turnkey solutions. Making a router table with your own hands does not mean at all that you need to make a router with your own hands or puzzle over how to make an elevator for the router yourself. There is how ready-made fixtures for the cutter, and ready-made components, from which you can independently assemble a milling table.

A complete set of accessories that make up a router table with a vertical router may consist of:

Milling table base
Milling table surfaces (so-called worktops)
Profile with two T-slots for attaching accessories to the router table
Milling lift
Milling cutter of sufficient power, suitable for this elevator
Set of collets for router
kit (they close big hole lift plates, leaving a hole for the cutter
Guide for a table with two movable halves (possible use as a guide)
(height of the cutter relative to the table surface)
Workpiece clamps in 2 planes
Angle stop
Movable table
Milling Table Power Systems

Below in the article will be described in detail all of the listed elements.

Milling table base

The milling table base can be purchased from us or can be made by the user himself. This is the simplest part of the design, allowing for a wide range of creativity.

The base of the milling table can be a simple homemade construction such as plywood, aluminum or steel profiles. We invite you to consider the possibility of ordering a milling table base from us, made using carpentry technology. It will be beautiful table with many drawers, with an integrated table top, the table will be movable on wheels. People who have already seen these tables said that this is not a milling table for the workshop, but an object beautiful furniture. Being sure that it is more pleasant to work in a beautiful environment, beautiful instruments more beautiful products, we recommend to pay attention to such a decision. The project of such a table can be edited according to your wishes, but, in principle, it will be beautiful, well-made, mainly from solid wood.

The surface of the milling table (tabletop) can be made of aluminum, steel, cast iron, laminated MDF or reinforced carbolite. There are solutions based on artificial or natural stone. Each of these materials has its own advantages. The best combination of characteristics is fiberglass-reinforced carbolite - the material is stable, even, durable, with a smooth surface.

If you are purchasing a prefabricated worktop and intend to install a milling lift into it, you need to keep in mind that the milling lift you choose must match the selection in the worktop.

The advantages of the finished tabletop are:

a ready-made solution that allows you to immediately assemble the milling table and start working
high quality workmanship and materials

If you prefer the path of self-manufacturing countertops, then the simplest option would be an MDF sheet, preferably HDF, 35-40 mm thick, laminated with plastic. Also, the tabletop can be made of stone or wood. The advantages of a homemade countertop are:

free choice of milling table top size
free choice of color solution
free choice of worktop material

If you prefer independent production countertops or order this production, then pay attention to the possibility of installation on the countertop - even if you do not have it yet, this is not excluded in the future.

IN homemade countertop, on its upper plane, it will be necessary to make a recess in the shape of the milling lift plate. For our buyers of the milling table set, we offer free use of a template for making a sample or make a copy of this template for further independent use.

We recommend and offer ready-made worktops made of laminated MDF or reinforced carbolite with dimensions of 600 x 800 mm and 700 x 1100 mm (approximate dimensions, exact dimensions can be clarified when ordering). These tabletops will already be pre-selected to exactly match the plate of the milling lifts we offer. These worktops will also have three profiles already installed: two for mounting the rail and one for mounting accessories for routing.

Profile with T-slots

In both cases, you get the opportunity to precisely set the two halves of the guide in the same plane, the ability to extend one half relative to the other, for example, for jointing. In both cases, you get aluminum profile guides with parallel movement of the halves of the guide,

In the case of using a positioner, you get the possibility of absolutely accurate, precise, smooth, repeatable movement and positioning of the guide with much more functionality. You can read more about this decision.

Cutter height indicator

If you decide to purchase a milling table for yourself, then initially define as a goal - the acquisition complete set for a milling table, then - means and methods - to buy everything at once or in stages, starting with the most necessary so that you can start working, then buying additional add-ons to get a fully functional kit. We recommend that you choose this path from the very beginning.

If you decide to purchase a router table kit with our help, we will gladly and responsibly perform this work. With pleasure - because we are pleased that in the "shelf" of users quality tool arrived.

The procedure for purchasing with our help is very simple:

We come to a decision on the necessary kit
We calculate the total price including all costs
You pay us this amount
We will organize everything necessary for the purchase / payment / verification and delivery to Russia
We inform you about the arrival of the goods
If necessary, we send the goods to your city.

Buyers interested in this article also showed interest in the following information:

* Note.

The original literally says "Clothes and jewelry are nonsense and tinsel, it is important how much you need a thing (service, advice), how it is useful to you and how long it will last you. The most important thing is that you chose this thing (or service) when you heard a cry rogue or did you listen to the advice of a sage? Only a sage will advise you that which will not cause you troubles and problems. © (经验丰富的圣人)

Evgeny Fuks

Milling lift, which Victor Travelller uses in his, as I understand it, extreme table. So to speak, the latest model. Fraser uses the same long-suffering interskol FM32.

The most interesting aspect of this lift is the ability to adjust the position of the router without bending over or getting under the table. This is done with an imbus key directly from the countertop.

The entire block, together with the milling cutter, can be easily dismantled and replaced with a circular saw. Let's take a closer look at the device of this lift.

The lift itself consists of two U-shaped halves that move relative to each other. One is fixed relative to the base of the router, the other is movable (it pushes the head of the router up)

They are connected to each other (that is, with a hexagon head bolt with a stud of the appropriate diameter) using a pair of nuts (main and locking). At the same time, the hexagon bolt remains on top, flush with the table surface. Through a wide nut, rotation is transmitted to the stud, with which, respectively on the mortise nut in the lower half of the slide, which, due to rotation, are pulled up.