Do-it-yourself slides for children made of wood. We make a children's slide for the joy of the baby. Finishing a metal children's slide

Step by step photo instruction: how to make a playground with your own hands. Tips, drawings, videos.

You can make a full-fledged playground with a slide, stairs, a balcony, a rope, a manhole and a swing with your own hands. The following guide will help you with this. It contains many detailed photographs, so there will be no problems with the manufacture of structural elements and their installation.

Getting ready for work

To begin with, we purchase the material we need - boards 15x2 cm and 5x2 cm and timber with sections of 10x5 cm, 10x10 cm and 5x5 cm.

We prepare the following tools:

electric drill;
electric jigsaw;
grinder;
hammer;
roulette;
level.

In the process of work, you may need some additional little things like a screwdriver, knife, etc.

We make supports

Pre-prepare the project of the future complex. Please indicate on the drawing what you want. dimensions each element of the system. Consider the size of the existing construction site.

we cut the timber into pieces for arranging support posts and crossbeams;
sanding wooden elements;
impregnate sanded wood.

The average length of the supports is 900-1150 mm. About 80-100 cm of each support will be dug into the ground, about 10-15 cm will remain above the ground.

We lay out the supporting elements on the site in accordance with the project and form a frame - two side parts of our future complex. For connection we use screws with a diameter of 8-10 mm. We melt them into wood. The holes are closed with plugs.

sandbox prices

sandbox

We expose the sides on supports, fixing them in previously prepared recesses. At this stage, we enlist the help of 1-3 people. The sides are set according to the level. Previously, it is recommended to lay bricks under the bottom of each support for better stability of the site. We cover the installed supports with crushed stone by 10-15 cm and fill it with concrete mixture.

We connect the exposed supports with transverse beams. We leave the fill to gain strength.

Making a ladder

While the concrete hardens, we are engaged in the arrangement of the stairs. We cut the timber desired length. The design of the stairs is extremely simple: 2 stringers and steps. We make the steps not too high - the playground is still for children.

We tighten the stringers with the help of hairpins. We fix the steps in the recesses and additionally fix them with self-tapping screws.

We dig in the support pillars for the future stairs. We maintain the desired slope. Let's make it not too cool. The arrangement of supports remains the same as in the previous section.

Let's try a ladder. We set it according to the level, attach it to the base and fill the supports with concrete. We paint the stairs.

Next, we make railings. For this we expose vertical racks from a bar, we fasten them to the stairs, and then we fix the handrails. We make the upper handrail from a board and fasten it at a height of about 90 cm, we fix the second handrail approximately in the middle between the upper railing and the stairs. For its manufacture, we can use a beam of 5x5 cm, 5x2 cm or another similar section.

We make a slide

What is a playground without a slide? Let's make it too! We will not spend money on a ready-made plastic descent. We won't mess with metal either. Let's make a slide out of wood!

First we will assemble the slide and then attach it to the base. Recommendations for laying the floor will be given below.

For the manufacture of the structure, we need the following material:

timber with dimensions of 70x10x5 cm - 2 pieces;
boards 220x15x2 cm - 5 pieces;
timber 45x10x5 cm - 5 pieces.

From three boards we will make the base for the descent. We cut the boards to the same thickness and carefully grind. After that, directly on the surface we fasten the boards with the bars. We fasten from above - so we can pull the boards to the timber as efficiently as possible. Fasteners are recessed into the wood. We cover the recesses for wood processing. Let it dry, and then once again carefully grind the entire hill - it should be as smooth as possible.

Made the base. Let's start making the side pieces. Determine the angle of descent. The top floor of our playground will be at a height of 130 cm. Therefore, the descent angle will be about 55 degrees.

Prices for children's slides

children's slide

We grind the sidewalls, getting rid of sharp corners. Additionally, we round the boards along the length so that it is more convenient for the kids to hold on to the sidewalls while going down the hill.

It remains only to paint the product. You can cover it with stain, and then with varnish.

Now we need to install the finished slide. To do this, we concrete supports made of timber in pre-dug pits. Suitable material with dimensions of 70x10x5 cm. We pre-impregnate the wood with an antiseptic.

We connect the base of the slide with the support posts and the game complex using screws.

Making the floor and railings

We lay out the floor of our play complex from boards 15x2.5 cm. The total length of the floor is approximately 2.5 m. Before laying the floor, we attach stiffeners to the frame of the complex. For their manufacture, a beam of 5x10 cm is suitable.

At the same stage, we construct a vertical ladder from the end. To assemble it, we use 2x5 cm planks. At the end of the work, we will hang a rope near this ladder. Recommendations for the arrangement of railings have already been given earlier. We follow them. From the side of the steps, instead of the railings from the boards, we mount a 5x10 timber for arranging the manhole.

In this step, we will build and install support structure for a swing and equip a manhole. We make the support of the upper beam crosswise - it is more stable. We first make a selection for convenient joining of the bars and additionally tighten them with bolts. Lay on top of the supports and press with a clamp cross beam. We fasten it to the support.

We dig holes for racks. We install supports in them, carefully checking each level. At the same stage, we fasten spacers to the uprights - they will not allow the supports to move during the hardening of concrete. We fill the pits with racks with a small layer of gravel and concrete.

Pits for racks

While the concrete pour is gaining strength, we make a manhole. We make the slope almost vertical. We arrange steps and cutouts at our discretion. Holes are cut with a jigsaw. We make the manhole itself from OSB and fasten it to a frame of 5x5 cm timber and 5x2 cm crossbars.

On the top floor we equip a balcony. To do this, we lay and fix the crossbars, lay the floor and build a roof up to the length of the stairs. From the side of the hill we fix a wall of OSB sheet. To make it more beautiful, cut out a small window in it. We make railings on the balcony.

We grind all the wooden elements installed at this stage. Sharp corners and ends are rounded off. We cover everything with varnish.

The children's slide is one of the favorite entertainment for kids, and parents are also not averse to sliding down it. Before, every playground had metal structure, today it is a bright and colorful design made of wood or plastic.

Today, a children's slide can be purchased at a specialized store and it will no longer be just a structure with steps and a descent, but a whole play complex. Of course, not every family can afford to buy such entertainment. But if you want to please your child, then you can make a children's slide with your own hands.

When buying a ready-made slide in a store, there is not always confidence in the quality of the product, but if you do it yourself, you can slowly foresee all the nuances of safety and minimal cost get a safe and high-quality design.

The first thing to worry about is the safety of the child. All equipment used in playgrounds must comply with GOST. For example, a slide should be equipped with railings and sides of such a height that the child cannot fall out or get stuck during the game. The lower part of the descent should have a smooth rounding with a radius of at least 5 cm at a height of 20-30 cm from the ground.

Near it there should not be electric lighting devices, household buildings, trees, etc. The child is not recommended to spend a lot of time in the sun, so at least part of the structure should be in the shade.

It must have the following characteristics:

strength;
stability;
functionality;
attractive appearance.

The structure must be well fixed, you can concrete or use metal supports. All parts must be sanded and varnished. The size of the structure should correspond to the age of the child, for younger children school age height should not exceed 3.5 meters.

Material

For the construction of a children's slide, it is necessary to use environmentally friendly materials. Most often, such structures are made of wood or metal.

The installation process will be different depending on the material chosen. Wood and metal have their own characteristics, which you need to know and take into account even at the selection stage.

Children's slide made of metal

To build a metal slide, you need electric welding and skills to work with it. It is also worth considering that the metal heats up during welding and can be deformed.

Therefore, the end result, without at least a minimum knowledge of working with metal, may not meet expectations. But despite this, the metal structure has such advantages as:

durability;
strength;
reliability.

However, do not forget about the shortcomings. The main disadvantage of a metal slide is that it heats up in the sun and the child can get burned. Therefore, such a structure will have to be placed on the shaded side of the garden plot.

And one more minus - if a metal slide is installed in the country, then there is a high probability that the ubiquitous scrap metal collectors will drag it away.

wooden slide

One of the advantages wooden structure is the ease of installation. It does not require special and expensive tools to work. Main tool kit:

jigsaw;
drill;
grinder and nozzles for it;
hammer.

Anyone can use this tool. Wood has practically no disadvantages, and those that can be found are easy to fix. For example, to protect against moisture, it is enough to process it by special means and varnish.

The choice of material is up to you. And if you are the first to make such a design and have never worked with welding, choose a tree.

Construction process

The first step is to make a drawing. You can use a ready-made layout or come up with your own. Then, in accordance with the drawing, prepare the material: cut the timber to size, sand and plan the logs and boards. On all structural details, it is necessary to chamfer the corners so that the child is not injured.

Then a territory of 2 × 2 m is marked out, and more if possible, and in the future it is planned to create a playground. A garden drill makes depressions 60 cm deep in the ground. Coated waterproofing material poles are installed in prepared pits and concreted.

In the upper part of the bars, with a hacksaw or a milling cutter, grooves are cut into which the planks are inserted. The slats are fastened with self-tapping screws and perform two functions:

strapping - the structure becomes stable and more rigid;
fence - ensure the safety of the child on the hill.

Now you need to attach two more planks to the bars, a ramp will be attached to one, and a ladder to the other. On these strips, the floor from the boards is fixed with self-tapping screws.

The fence should rise at least 10 cm above the plywood, this will not allow children to fly out of it. All connection points wooden parts additionally fastened with corners.

When the slide is fully assembled, they start grinding and painting. All elements are deburred with a grinder, and sharp corners grind down.

Now you can apply to wooden surfaces varnish or paint. In order to make the sliding better, you can additionally fix a sheet of tin on the descent.

The slide will be the most fun entertainment for children if you install it on personal plot. While you are working in the garden or in the garden, the children will have fun riding the slide. And if you have enough tools and materials, as well as golden hands, then you can make a children's slide made of wood or metal yourself, and it will cost much less than an expensive design from a store.

Types of children's slides

A children's slide is an optimal design for children from 3 to 7 years old, which can be installed in your backyard. Let's see what slides can be installed on the territory country house. To date, there are the following types of children's slides: inflatable, plastic, metal, wooden.

inflatable slides

Such slides are made of durable PVC, and they are suitable for the smallest children. They are easily inflated with an electric pump or hand pump and installed in any convenient location personal plot, but only on a flat surface. Since even the most durable film can be pierced by any sharp object, it is best to place the attraction on an asphalt, concrete or stone platform so that branches, stones, nails cannot damage PVC film. After the summer is over, you can simply deflate the inflatable slide, put it in a special case and hide it in the pantry until next year.

The inflatable slide can be easily installed in any convenient place in the backyard

Plastic slides

Such factory designs are designed for riding children aged 3 to 5 years. From durable plastic, the slide can be made in any geometric shape, so that the child would be interested in riding it. The plastic slide does not take up much space, is easy to clean, has an excellent sliding smooth surface It is absolutely safe for children over 3 years of age. Since the slope has a high degree of heat capacity, you can ride such a slide even in the cold season. The plastic will be warm in winter and cool in summer, so children will be comfortable enough to go down the ramp.

A plastic slide is best suited for children aged 3 to 5.

Metal slides

These are reliable and durable structures, which will last for decades with proper and proper care of the metal parts of the slide. Here it is possible to make a descent of any height, and therefore the slide is suitable for children over 10 years old. A significant disadvantage of a metal slide is the high thermal conductivity of the material, so it will be very cold to ride it in winter and hot in summer. The metal slide should be painted regularly in order to protect it from premature corrosion.

Metal slide at proper care will last for decades

Wooden slides

Wooden slide - the most convenient and environmentally friendly for installation in the yard of a country house or in the country

Photo gallery: options for children's slides

Children's slides made of wood are considered the most environmentally friendly Inflatable children's slide for the winter can be blown away and stored in the pantry A metal slide can get very hot in summer, and cool down to sub-zero temperature Kids will love the heavily curved prefabricated plastic tube Low height is perfect for kids wooden slide with metal descent It is better to install a wooden slide next to the sandbox, trampoline and horizontal bars to get a full-fledged playground

Preparing to work on creating a wooden slide

Before you make a wooden slide with your own hands, you need to draw up an accurate project, drawing and make calculations for the entire structure. Today, thanks to the Internet, you can easily calculate its dimensions, make a project in 3D and see how the slide will look like when finished.

slide project

For a small child, it is best to build a low, gently sloping slide so that he can independently climb and descend from it. Older children will be happy with the slide with turns and bends. When creating a slide project, the following features should be considered:

it is necessary to calculate the number of steps and the optimal distance between them, as well as the steepness of the march, it all depends on the height of the children. The higher the child, the greater should be the distance between the steps. You also need to decide on the height of the handrails and their installation location;
a slide for kids should have a gentle staircase, and children from 7 years old can make vertical steps;
the dimensions of the slide depend on the expected width and height of the slope, as well as the guardrails;
the installation site of the structure must be level, and before descending, enough space should be left for safe riding;
the slope of the descent and the steepness of the stairs must be absolutely safe for your child.

When building a slide, it is necessary to take into account the wishes of the children and rely on their own abilities.

slide drawing

First, draw up a plan for the slide. You can draw your own drawing or find a ready-made layout on the Internet. Ready-made drawings of wooden slides are convenient in that they indicate the exact proportions of the structural elements and the dimensions of the parts.

Calculation of the amount of material

To build a slide structure with a descent length of 3 meters and a platform size of 50x50 cm, you will need:

4 wooden beams size 10x10x150 cm for the installation of supports;
2 wooden beams measuring 2x4x50 cm to enhance the strength of the site;
2 wooden beams 3x3x50 cm in size for mounting the site fencing;
2 wooden beams measuring 3x3x150 cm for the installation of railings;
4 boards measuring 2x10x50cm for bottom connection supports (structural strength device);
5 boards measuring 2.5x10x50 cm for flooring on the site;
no more than 8 boards measuring 2.5x10x30 cm for mounting steps;
2 or more floorboards 3 meters long or water-repellent plywood over 2 cm thick for mounting the descent. If desired, you can use a plastic slope, which is produced in the factory. It can be bought in specialized companies or made to order;
2 boards measuring 2.5x10x300 cm for installing ramp fences;
self-tapping screws and anchors for fixing structural elements. Fasteners must be galvanized so that they do not rust in the future. It is better not to take nails when building a slide;
2 boards or beams of the appropriate length for the construction of a stringer or bowstring for steps. Under the top platform of the frame, if desired, you can make a large capacious box for storing various children's toys and sports equipment in it.

List of tools

To build a children's slide from wooden elements, you will need the following set of tools:

construction roulette;
good hammer;
plumb or level;
drill;
electric saw or gasoline saw;
Sander;
carpenter's planer.

Stages of construction of a wooden children's slide

Before proceeding with the choice of material for the construction of a children's slide, you should choose a place on the site to install the attraction. The place where it is decided to install the slide is recommended to be well leveled. The slide is best located away from trees and various buildings. The surface around the structure can be covered with a rubber coating or sown with lawn grass.

Step-by-step instructions for creating a slide from wood

For the construction of the slide structure, it is necessary to use only completely dried wooden boards, as this will significantly reduce the percentage of various deformations in the future. All boards must be well processed with a planer to remove knots and notches, and also sanded with a special grinder. It is also necessary to chamfer, that is, round off all the sharp corners of the boards.
Boards and wooden beams are considered the most environmentally friendly material for creating children's attractions.
lower part support pillars it is necessary to treat with good antiseptic agents: flame retardant, waterproofing mastic, resin or engine oil waste, as they will help to avoid premature decay of the tree and its damage.
At the place of installation of the slide, the points for installing the racks of the structure should be marked. These are four square sectors 50x50 cm in size. Then you need to dig holes 50–60 cm deep and fill them with a sand-gravel mixture by about 20 cm. This will additional protection for support posts.
Installed in prepared wells wooden racks and fill them with concrete. To make the supports strong, they are “tied” at the bottom. To do this, grooves of 2 cm in size are cut out in the support posts with a milling cutter or an ordinary chisel. Then put the board for the lower connection of the supports into the cut grooves and connect the supports to each other. Fastening is carried out with self-tapping screws or screws. If you plan not to dig the supports into the ground, then you will have to install strong extensions on the supports.
To mount the surface of the top platform of the slide, take 2 wooden beams 2x4x50 cm in size to enhance the strength of the platform and 5 boards 2.5x10x50 cm in size for the floor. The bars are laid out parallel to each other, and then prepared sexual pine boards. Between the boards leave gaps of a few millimeters for drainage.
For the installation of the upper platform of a wooden slide, sanded boards are required, in which there are no knots and notches
The descent for the slide from wood can be made plastic, and then you just need to fix it on the constructed structure. To make a descent from wood, take floorboards 3 meters long or water-repellent plywood and fasten them together along the slope, and then install the sides for fencing from two boards measuring 2.5x10x300 cm. You can attach the descent to the floor surface of the upper platform by forming an angle in 45° and then screwing the boards to the base. The second option is sawing grooves. The lower part of the slope, like the upper one, is sawn at a certain angle. This will provide greater stability to the entire structure.
When creating a children's slide with your own hands, the easiest way is to use a plastic slide
The boards from which the slope is made must be well sanded before assembling them and after installing the descent. The exit must be perfectly smooth and even, without knots and hooks, so that the child does not get a splinter or abrasion while riding the hill.
The wooden descent for the slide should be as even and smooth as possible so that the child does not get hurt during the descent
The slope for the slide can be made from a plastic sheet, as it has excellent sliding qualities. But plastic can crack from temperature changes and heavy physical exertion, so it is not entirely suitable for areas with harsh climatic conditions.
Galvanized steel sheet with a thickness of more than 0.5mm will great solution for the device of a smooth ramp for a wooden slide. Can also be used thin plywood, linoleum, as well as a special wax polish applied to wood. All these materials can be laid on top of a wooden ramp, they will make the descent easy and fast.
For older children, you can make a complex screw slope, but then you will have to approach its design in more detail, and additional coverage will be mandatory in this case. Remember that any uneven descent, sharp edges and corners of metal sheets, as well as other traumatic elements can cause serious injuries to children. Therefore, all attachment points of self-tapping screws must be carefully sanded, and the slope itself must be varnished or painted with paint.
For the manufacture of stairs, it is necessary to make a bowstring or stringer - it depends on the developed drawing. There should be a lot of steps so that it is convenient for the child to climb onto the platform or go down if necessary.
Fences (railings) depend on the design of the slide, its height, as well as the size of the upper platform. It is best to make high railings so that the child does not accidentally lean over them and fall. Also, the fence on the descent should be high so that the child does not fly out while skiing.

Finishing a wooden slide

Even if it seems that it is very easy to make a children's slide, some nuances should be taken into account.

For the rotary descent device, you can take high-quality flexible plywood.

Each element and details of the stairs must be well and securely fastened. wooden elements and details of the slide are recommended to be painted not with oil, but with acrylic waterproof paint, but best of all - with water-repellent varnish, which is used to cover the decks of yachts. Such a coating must be applied in several layers with the obligatory drying of each subsequent layer.

In order for the child to land softly during the descent, there should be a mat or a good sand mound below.

painted acrylic paint wooden slide looks bright and attracts the attention of children

Since the slope is constantly exposed to friction during skiing, you will have to periodically paint it. Before that, it will be necessary to re-grind the surface, eliminate all existing defects and wipe the cracks formed with high-quality putty.

The slide is best installed in the yard in a shady place so that it can be seen from the window of the house. This will be the best way to keep an eye on the rolling children.

Near the hill there should not be any thorny bushes, allergenic and poisonous plants, such as datura grass and foxglove, so that children do not accidentally get poisoned by their berries. Honey plants should not grow nearby, as they will attract bees and wasps, which may accidentally sting a rolling child.

A lot of free space should be left near the slide so that many children can be there at the same time.

Video: how to build a wooden children's slide yourself

Metal slide for children: preparation

Metal structures for country houses are no less popular than wooden ones and therefore a metal slide will look great on any personal plot. Children will be able to have fun and not distract their parents from activities in the garden and in the garden. If you can work with welding, then building such a slide will not be difficult.

A metal slide will look great on any personal plot, this design is durable and reliable

Advantages of a metal slide:

high degree of strength and reliability;
durability;
high level of wear resistance;
sustainability.

Design flaws:

reaction to temperature changes (it gets very hot in summer and cools in winter);
rapid corrosion of metal without appropriate treatment and care;
the difficulty of manufacturing an attraction without proper experience with metal and welding.

Required Materials

The length of all elements will depend on the size and dimensions of the future slide. In this case, it is necessary to take into account the fact that the supports must necessarily be concreted into the ground. To create a metal slide you will need:

square pipes measuring 3x50x50 mm or round pipes with a diameter of about 50 mm for support posts;
square pipes 2x50x50 mm in size for creating an upper platform, descent, railings and flights of stairs;
galvanized metal sheet with a thickness of more than 3 mm to create a slide slope;
wooden boards for steps if necessary;
metal corners with a bar 5x5 cm;
anti-corrosion agents and primer;
special water-repellent paint for metal;
cement, sand and gravel.

Tools for mounting the slide

To create a children's slide made of metal, you will need the following set of tools:

Bulgarian;
electric or gas welding;
drill;
building level;
Sander.

Stages of manufacturing a metal children's slide

The first step will be the development of a drawing, which will greatly simplify the calculation of the necessary material and attachment points for all elements and details of the slide structure.

For the manufacture of a slide made of metal, a more thorough design drawing will be required compared to a wooden attraction.

Step-by-step instructions for making a metal slide

To create the top platform of the slide, it is necessary to make a frame from a thick pipe with a square section, and then cover it with a sheet of metal and weld it. In order for the platform to be strong, it is necessary to weld the iron corners at the bottom in a crosswise manner. To avoid strong slipping, you need to take ribbed metal or choose another anti-slip rough coating (rubber can be used).
For the construction of the frame, it is necessary to weld support pipes (racks) to the upper platform. It is necessary to weld square metal "heels" to the lower edges, which will give greater stability to the entire structure. Without them, the supports under the irresistible action of gravity can sag significantly, and the entire frame of the slide can simply squint.
It is better to strengthen the support posts of the slide with transverse pipes so that the structure does not deform over time
Installation of the iron frame begins with drilling wells in the ground. The pits should be at least 60 cm deep. We pour a sand and gravel pillow on their bottom, on which supports with “heels” will be installed. Pour water over them and let stand for about 24 hours. Then the supports are installed strictly vertically in level and poured with concrete.
The construction of the stairs is as follows. On one side of the structure, two inclined squares must be welded to the upper frame platform. iron pipes, which will act as the main staircase. Then steps will be welded to them. From the corners, you can make a frame of marches, and make the steps themselves from wooden polished and dried boards or rectangular metal elements. wooden steps safe, especially in the cold season, while the metal is more slippery and traumatic. But if the steps are provided with an anti-slip rubber coating, then metal sheets can also be used.
The slide railings (fences) for kids are best made of metal mesh, and for older children, metal railings with wooden handrails are enough. The distance between all the parts (pipes) of the fences should be such that the child cannot get stuck between them if he suddenly wants to climb through them.
When determining the curvature of the gutter for the slope, it must be borne in mind that the angle of inclination should be steep at the very top and more gentle at the bottom. This will provide your child with a natural way of braking, and therefore a smooth, safe landing.
From a metal sheet, you can make a descent of any shape (screw, straight, twisted). This requires two frame square pipe bend in desired configuration using a pipe bender or hot welding. Then the upper ends are welded to the site parallel to each other, and the lower ends are buried in the ground. After that, stiffeners are welded to them, which are transverse crossbars. On this design a rectangular sheet of metal is laid, intended for the descent device, and welded along its edges to parallel frame pipes. The sheet is overlapped so that the child can ride comfortably. For a ramp, it is best to take a galvanized, stainless or aluminum sheet.
It must be remembered that the metal elements of the slide will get very hot in the summer, and the child may get burned while riding. And in winter, the metal will freeze strongly, which is also inconvenient for children, especially at low temperatures, the baby’s wet hands can “stick” to the metal. Therefore, it is best to cover the descent with linoleum, and all metal elements that the child will touch can be covered with rubber pads.
Parallel to the base of the sloping descent, at a height of approximately 5–10 cm, special elements made of reinforcement or a thin pipe are installed, which will serve as the sides that enclose the descent. They will make riding safe for kids. In order to prevent the child’s hands or feet from falling into the gap between the side and the slope during the ride, it is necessary to sew it up with the remains of a metal sheet.
Since the metal ramp is quite light and can sag under its own weight, as well as under the child, it is best to weld additional strong racks under the gutter for descent and bury their lower part in the ground.

Finishing a metal children's slide

After completing all welding work it is necessary to carefully process all seams, edges and corners of the structure with an electric grinder in order to ensure complete safety when children ride.

All metal elements should be treated with an anti-corrosion primer and painted with metal paint. The slope itself is not recommended to be painted, as this will slow down the sliding process, the descent is made of stainless material.

Where possible, all metal parts should be covered with rubber pads that can protect children from burns in summer and freezing hands in winter. Cover the slide area with a special coating that has anti-slip properties.

Pipes for the manufacture of the frame must have thick walls (at least 3 mm or more) so that they do not bend during operation. This is especially true of the pipes from which the support posts will be made. Quality metal profile and a sheet for a slope - very important factor during the construction of a children's slide.

The place for mounting the attraction must be chosen even and preferably on a hill, where there is no ground water, since they can wash away the structure over time and it will squint.

To install a slide, it is best to choose a territory where you can later install other children's attributes: a sandbox, swings, carousels, horizontal bars. An excellent children's sports and entertainment area will turn out.

Video: making a children's slide from metal

Thus, it is easy to make a children's wooden or metal slide with your own hands, if you follow all technological processes and strictly follow the drawn up drawing and dimensions. Children will appreciate your efforts and will be happy to ride such a slide both in summer and winter, having fun in your country house.

Parents who have small children often have to visit playgrounds so that the child swings, plays in the sandbox, and rides down the hill. But adults do not always have enough time for such events, especially if the site is far away. Having your own plot, you can make such entertainment for a child at home. This will solve many problems of parents, and the child will always play under supervision. Today we will talk about how to make a children's slide with your own hands from improvised materials.

A metal slide is a common building from Soviet times. It was installed on the playground along with the sandbox. Metal is the strongest and most durable material. But under the influence of external negative factors, it undergoes corrosion, so it is better to use stainless steel or galvanized metal for the manufacture of slides. At self-manufacturing slides at home must have a drawing at hand.

From materials and tools you will need:

metal pipes with a diameter of 15-25 mm, rods;
corners with a section of 50x50 mm, 20x20 mm;
sheet iron with galvanized coating;
multi-colored paints, cement, crushed stone;
welding machine, Grinder, crowbar, hammer.

Having prepared necessary materials, at the site of the future installation, proceed to the manufacture of the structure according to the drawing:

Start manufacturing with a frame. For the upper platform, weld a square measuring 1.5 x 1.5 m from the corner. Place stiffeners crosswise inside it. Weld on top of the square to the corners a metal sheet not less than 1 mm thick of the same size. If possible, use corrugated iron, it will give stability, and the child will not slip on the playground.
Weld the finished platform to the racks. For their manufacture, you need a pipe with a diameter of 25 mm and a length of 3 m. To the ends of the racks, the lower part of which will be concreted, weld the heels from any metal scraps.
Under the welded frame, mark and dig 4 holes about 1 m deep with a drill. Tamp the bottom with small stones or rubble. Lower the frame racks into the pits, aligning the structure with a plumb line. Knead cement mortar with rubble and fill in the holes. After about a week, the solution will completely harden and you can continue building.
From a 20 mm pipe for stability, cross-weld the frame strapping between the uprights. From the edge of the platform down to the ground at an angle of 45 °, weld a descent from 2 corners with a section of 50x50 mm parallel to each other. Across the corners, weld strips for steps from corners with a section of 20x20 mm at a distance of 20 cm from each other. Sew up the plane of the steps wooden planks or corrugated iron.
On both sides of the stepped descent, weld handrails from 15 mm pipe. Sew up the openings between the handrails and the descent with a metal mesh or thin rods.
The chute is made from 2 pipes with a diameter of 20 mm. Bend the lower part of the pipes with a pipe bender or by heating with a cutter. You should get a design from a steep descent, smoothly turning into a horizontal plane. Weld the upper part of the gutter to the other edge of the site. Fix stiffeners between the pipes of the gutter. From above, weld galvanized sheet metal with a thickness of at least 1 mm. If it is not possible to make a descent from solid galvanization, then weld smaller sheets with an overlap along the descent.
Curve the sides of the gutter fence from a 15 mm pipe. They need to be welded parallel to the bottom at a height of 30 cm, and the sides are sewn up with galvanized sheet metal. In several places, weld supports for the gutter from any remnants of the pipes.
The metal structure is ready. It remains to process it with a grinder to eliminate all sharp protrusions. The design can be decorated multi-colored paints to be attractive to the child. The bottom of the descent does not need to be painted, otherwise the coating will reduce slip.

Wood slide

Wooden slides at home are easier to make on your own; welding is not required here. Wooden structures are less durable than metal ones, but a beautiful playground with a sandbox, a house, rope ladders and other equipment can be made from wood. For DIY construction, it is better to use wood conifers. From materials and tools you will need:

4 beams with a section of 100 x 100 mm, a bar with a section of 50 x 50 mm, edged board section 25 x 150 mm;
galvanized iron 1 mm thick or linoleum;
self-tapping screws, nails, antiseptic, varnish or multi-colored paints;
cement, crushed stone;
electric planer, grinder, screwdriver, hammer, sandpaper.

Work, as always, start with drawing up a design drawing. Decide whether there will be a slide with or without a house, and draw a diagram of it. This will make it possible to calculate the consumption of material, as well as facilitate further construction.

Everything is ready, you can start carpentry work:

From the remnants of the material, make near the slide wooden benches or sandbox. They will decorate the playground, bringing joy to children.

Plastic slides

It will not be possible to make a plastic structure on your own, it is only bought in a store. Such slides are produced in one piece and collapsible. The owner can only install a slide on the site. Collapsible models are better suited for summer cottages. It is convenient to disassemble them for storage in the winter. This will prevent theft and vandalism at a time when the cottages are left unattended by the owners.

IN plastic models use different gutters, which is very popular with children. They are screw, tubular, straight and other shapes. If the child still wants an unusual descent, and the parents do not have enough money to buy, you can make a combined version of the slide for a summer residence or at home. The fact is that the gutters are sold separately. They are also made in any shape to order. You will only have to make metal or wooden frame and attach a plastic trigger to it.

A playground built independently for a summer residence or at home will decorate the yard, provide children with entertainment in the summer.

In contact with

A do-it-yourself children's slide is one of the most common and sought-after attractions on any playground. There are many options for the design of such a structure. The simplest is a paper layout that can be placed on a table. The paper version is suitable for games, for example, with plastic figures. A much more complex event is the construction of a slide in the country or in the yard own house. Here everything should be thought out, and the most important thing is a guarantee of safety for the child. If only a figure suffers in a paper toy, then there is a real threat to the kids in the yard.

Attraction features

Children's slide is familiar to any person from early childhood. Often it is with such an attraction that the knowledge of the playground begins. The essence of such a game is the ability to descend from a certain height along an inclined platform, usually on your feet or sitting, without using any devices.

You can make a slide for children with your own hands of different heights, there are different designs. It can be a very simple option (ascent and direct descent), or it can be a whole complex with the possibility of descending along an intricate trajectory and decorative design(for example, in a fairy-tale style) of the entire structure. It all depends on the imagination of the parents, the allotted area and financial capabilities.

What are the requirements for a children's slide for the home? First of all, the issue of the safety of the child must be very carefully worked out. It must be prevented from falling when lifting, being at a height and descending. For this, a safety wall, barriers, railings, handrails are used. The design itself should take into account the age of the children who will use the slide.

The most important parameters in this regard are the height of the climb, the steepness and the speed of the descent. The protective wall and handrails must be installed taking into account the growth of the child. An attraction built for very young children should not allow the development great speed during free descent. It should be remembered that the height of the structure for children preschool age cannot exceed 3–3.2 m.

The most important requirements for a children's slide for a summer residence or at home are the following conditions:

high mechanical strength, taking into account inadequate children's behavior;
exclusion of slipping of the legs on the upper platform and stairs;
soft enough area at the bottom to avoid injury when lowering to the ground;
environmental safety of the materials used;
exclusion of the sun on the upper platform;
wind protection.

Design principles

With all the variety of forms of attraction, any do-it-yourself slide in the country includes the following main elements:

load-bearing frame of high strength;
lift ladder with railings;
upper platform with a fence (wall, etc.);
downhill slope.

The question of how to make a slide can be solved with certain complications:

Canopy. From above, the children's slide should be closed from precipitation and the scorching sun. Such a roof can cover only the upper platform or cover the entire structure. You can install a light canopy, but often a solid decorative roof is made, stylized in a certain genre.
In the slide, not one, but several basic elements (stairs and slopes) can be provided. For example, descents can be organized in parallel (competitive factor) or go in different directions. Accordingly, there may be several stairs.
Landing pad shape. The typical form of the descent is a straight flat tape of sufficient width with a side to prevent falling. The speed of movement is set by the steepness of the slide and the coating of the belt. The descent system can be significantly diversified. The following varieties are often used: changing the direction of a flat tape (kink), forming a gutter. spiral escapement, etc.

What materials can children's slides be made of? With the exception of a toy version of a paper slide, wood, metal, and plastic are used to make the structure.

For very young children, inflatable slides have gained popularity, which can be installed even in an apartment.

Varieties of attraction

You can make a children's slide with your own hands for different conditions, different age category and intensity of exploitation:

Compact slide for an apartment, i.e. room option. Such a small structure can be installed in a children's room. It is made of chipboard, plywood, laminate. There is no exposure to atmospheric factors, and therefore any durable material can be used without the requirement for water resistance. Special attention is given to colorful design, which allows you to fit the game into the overall interior of the room.
Plastic slide. It is intended for children aged 2-5 years. PVC is the most commonly used. The release tape can be of any shape, incl. in the form of a spiral, with waves, in the form of a pipe. Important advantage plastic - high heat capacity, which does not allow the material to get very hot under sunbeams and cool down in winter.
Metal construction. It is built if very high mechanical strength is required. Depending on the age of the users, the hill for giving can be made quite high. metal surface has excellent glide, which allows you to quickly slide down an inclined slope. The main disadvantage is excessive heating in summer and icing in winter.
Slides of wooden construction. Such an attraction in the country is the most widespread. It attracts with its high manufacturability, which allows you to embody the most daring fantasies on the arrangement of the structure. When using wood, it is important to reliably protect it from decay.

Required tool

In order to make a children's slide with your own hands, you should prepare in advance essential tool. When building a wooden structure, you will need the following:

Bulgarian;
electric drill;
screwdriver;
planer (preferably electric);
milling cutter;
hacksaw;
hammer;
chisel;
shovel;
Grinder;
file;
roulette;
protractor;
metal ruler;
construction level.

If you plan a metal slide for a summer residence, then you can not do without welding machine, hacksaws, chisels, pipe bending machines, calipers.

Features of manufacturing a simple design

One of the simplest designs of a children's slide is a rectangular platform, fixed at a height of 1–1.5 m above the ground on 4 support bars, to which a ladder adjoins on one side and an inclined lane for descent on the adjacent or opposite side. This slide is made of wood. Work should begin with the development of the project, and it is best to make a paper layout in the selected scale.

So you can visually evaluate the building and its design.

The next important step is to prepare the site for construction. For the attraction, it is necessary to allocate a flat area with an area of at least 2x2 m. The site is carefully leveled, all roots are uprooted, vegetation is removed. Drainage is provided around the site. The site itself is covered with a sand cushion on top.

The question of how to build a slide is solved in the following order:

4 support beams 10x10 cm in size are being prepared. To install them, a recess of the order of 10–15 cm is dug. The supports are placed vertically at the corners, and at the very bottom they are interconnected by a board measuring 10x2 cm, for which the corresponding grooves are pre-cut on the bars.
Racks with a frame are installed in a recess, after which it is covered with soil and compacted.
At the selected height, grooves are cut in the racks for fastening the platform floor beams (stiffening ribs). A frame is mounted in them for the upper platform from a bar measuring 20x40 mm.
The flooring of the upper platform is carried out with a board measuring 10x2.5 cm. The boards are tightly fitted to each other to eliminate gaps.
Manufacture of an inclined descent. This element is made of load-bearing boards measuring 10x2.5 cm, which are upholstered with boards or plywood 20 mm thick. The width of the slope is about 75–80 cm. A protective edge 30–35 cm high is attached to the side of the descent. To ensure better sliding, the surface is lined with plastic or galvanized sheet. The upper edge of the descent is securely fixed on the site, and the lower one rests on the ground.
Ladder installation. The kosour is made of a 5 cm thick board. A 10x2 cm board is used for steps. It is important to fix the steps on the kosour strictly parallel. The distance between them is set according to the age of the child. A baluster 50 cm high is mounted on the side of the stairs. A 30x30 mm beam railing is securely attached to the uprights.
After the installation of all elements is completed, a parapet of bars and battens is attached to the upper platform. To prevent a child from falling, it is recommended to line the barrier with plywood.
The attraction made in this way is sanded in its final form, and then varnished or acrylic paint is applied.

The children's slide is one of the first rides where kids enjoy spending time. It will decorate the playground in the country or in the courtyard of the house. simple design you can do it yourself. When building a slide, it is important to strictly monitor the safety measures for the child.