DIY lamps made of wood. Wooden sconces. All necessary materials for a lamp from a branch

All photos from the article

Over the past few decades, there has been virtually no design direction left that does not use wood products to one degree or another. A lamp in general and a chandelier in particular are objectively one of the most noticeable interior items, therefore hanging chandeliers made of wood are deservedly considered perhaps the most popular trend at the moment.

Features of wooden ceiling lamps

Any wooden object in the interior of a room is associated on a subconscious level with warmth and comfort. Traditionally, homemade wooden chandeliers are used in all areas of oriental themes, where geometric regularity of lines and at the same time warmth natural wood promote peaceful relaxation.

A trend like country music is generally impossible without the use of natural materials. The rural style has always been characterized by the use of slightly rough unusual shapes. The massive appearance of such lamps creates a feeling of reliability.

An antique wood chandelier is associated with medieval romance and knightly tournaments. Interspersed with forged metal elements give this design exquisite lightness and unique flavor.

Advantages of wooden lamps

• The first thing that catches your eye is the naturalness of such a chandelier. It is difficult to find a more environmentally friendly material. Moreover, being constantly near a heat source, wood releases health benefits into the atmosphere. essential oils and microelements.
• Processing technology of this material, as a rule, is not very complex. Assembly is relatively simple wooden structures accessible even to children.

• Wooden dacha chandeliers are deservedly considered perhaps the best solution.. After all, the dacha itself is intended for countryside holiday closer to nature.
• The price of the structure plays an important role. Even if you use it, the total cost homemade chandelier will be available for almost any budget. But as a rule, all costs end with the purchase of cartridges, light bulbs and wires, and a few planks or branches can always be found at any dacha.

What are the disadvantages of such lamps

• Opponents will immediately point out to you the fire hazard of such a chandelier. There is, of course, some truth in these statements, but with proper installation and use of LED or other low-heating light sources, you are in virtually no danger. In addition, there are a lot of natural impregnations on sale that prevent fire.

Important: such homemade lamps, no matter what you impregnate them with and no matter how competently you assemble them, it is highly undesirable to place them near sources of open fire. For example, next to the fireplace or in the barbecue area.

• Whatever one may say, wood is a living material and very hygroscopic. Wooden chandeliers for a bathhouse look great, but it is better to install them away from showers and steam rooms. Constant temperature change and high humidity are far from conducive to the preservation of the array. In this case, a wood-look chandelier is more suitable.
• Another serious problem with this material is the high probability of damage to the array various kinds pests. But as mentioned above, no one is stopping you from impregnating your chandelier with natural protective compounds.

A few words about self-assembly

A do-it-yourself antique chandelier made of wood is a very real thing. In essence, all you need is a great desire and a standard set of carpentry tools, which is found in almost every home.

Modern interior design is not only about correctly arranged stylish furniture and the color scheme that predominates in the rooms, but also in proper lighting. Lighting devices allow you to focus on certain areas of the room, visually enlarge the space or, conversely, give the bedroom or living room more comfort and warmth.

Today, crystal wall sconces are no longer a sign of wealth and luxury, but wooden lamps are actively regaining their former popularity. Few people know that in the 16th century, it was structures made of trees that were installed in temples, palaces and houses of wealthy officials. Of course, there was no LED lighting in those days, and instead of energy-saving lamps, the rooms were illuminated with candles placed on wooden branches.

In 2010, a tornado hit New York City, leaving behind mountains of broken branches and fallen trees. Young designers Harris Hine and Amily Visclocky wanted to draw public attention to this topic by creating lamps from found driftwood, but instead revived a long-forgotten style. Thanks to this idea, more and more people began to engage in such know-how and you, too, can easily create unique sconces ( Wall lights) with your own hands. Photos of ready-made and interesting lighting devices can be found in huge quantities on the Internet, but we will outline some of the features of such designs below.

Advantages and disadvantages of wooden sconces

In addition to their stylish appearance, such lamps can safely be called environmentally friendly. Not only does the tree not emit any harmful substances, it will also, on the contrary, saturate the air in the room with useful aromatic resins, making breathing easier. Another plus is the ease of processing the material. If for the production of plastic and metal structures If special equipment is used, a wooden lamp will require tools that are found in almost every home.

Wood is strong and durable, especially if it is treated with special impregnations.

If we talk about the disadvantages of such structures, then it is worth paying attention to the following nuances:

• Wood burns well, so using incandescent lamps in such designs is not recommended. Otherwise, the contact in the lamp socket may burn out and the entire lamp will burst into flames in a matter of seconds.
• Insects actively attack such lighting products.

• Wood is a hygroscopic material. This means that it accumulates and absorbs moisture well. To prevent the structure from deforming and serve for many years, it is better to use such a lamp at a constant temperature and humidity. Based on this, you can hang a sconce above the bed in the bedroom, but installing such lighting fixtures in the kitchen or bathroom is not recommended.

Healthy! Cedar is the most moisture-resistant species, and additional treatment with special solutions will give it even more resistance to temperature changes and moisture.

As you can see, before working with wood, it is necessary to prepare a project for the future lamp and calculate it in such a way that the lamps are located at a distance from the tree. Let's consider several options for such sconces and ceiling chandeliers.

Wood design options

The sconces in the living room interior, photos of which are presented in the article, look very cozy and homely. For this room, you can create a very stylish lamp that can be mounted on the wall or used as a table night light.

One option for creating a lamp is a sconce made from wood and a broken water pump. The resulting result looks very stylish and is suitable for lovers of design, which contains unusual devices that are not used for their intended purpose.

An unusual lamp will be made from the floor of a dried tree trunk, coated with varnish, and pieces of colored crystal glued to it. Such lighting fixture Can be hung horizontally, vertically or used as a floor lamp/night light.

A stylish Chinese lantern can be made from a broken lamp, bamboo and coconut fiber rope. It's pretty simple design which looks very impressive both in the house and on the porch or in the gazebo. By attaching a wooden hook to the bamboo, you get a multi-functional sconce on which you can hang plants.

You can make a sconce from wood with your own hands very simply. To do this, you will need a wooden plank that can be given any shape. A kind of hook will be attached to it, on which the lamp will be placed. It will require sticks of the same diameter and length, which we will fold according to the principle of a wooden well or house, which children usually build from pencils. The result will be an unusual lamp, as if from ancient fairy tales.

A creative lamp can be made from a pine branch, a garland and a curtain rod holder. This device is also multifunctional, as you can hang decorations, scarves and much more on the branches. The garland's bulbs do not heat up, so this sconce will not light up, and to create it you will not need any skills in conducting electricity.

A wall lamp for a nursery can be made from a wooden plank in the shape of a cloud and LED lamps. The resulting night light looks very beautiful on the wall, as the light is scattered as if from under a cloud.

By using your imagination you can create very creative lamp For country house, apartment or garden. You can use everything that, as you thought, has not been used for many years and is practically getting ready to be “thrown away.”

What to pay attention to when creating a lamp

• If you cut wood, be sure to always wear a protective mask. Sawdust can cause an allergic reaction.
• If there is only one light bulb in the lamp, then two wires will come from it. The phase is connected to a switch, from which a conductor will go to the input phase. Zero ( of blue color) is connected immediately to the input zero.
• If the lamp has 2 or more lamps, then there will be more wires, but the connection principle will remain the same.

The optimal placement of sconces depends on the type of room, for example:

• The height of the sconce above the bed in the bedroom should be 1.2-1.6 meters from the floor.
• In the nursery, it is better to place the lamp so that the child cannot reach the light bulb.
• In the corridor it is recommended to place it at a height of 2 meters from the floor. If the ceilings are low, then you can hang the sconces lower - at a distance of 1.8 meters.
• Optimal height The location of the sconce for the living room is 1.3-1.4 meters from the floor.

In custody

As you can see, you can make an unusual lamp for a room from ordinary objects. As a result, you will receive an exclusive and stylish element interior design that will cost you a penny, but will look much more interesting than an expensive metal chandelier.

Such a product would look great in a country or country house, in the hallway of the bathhouse and even in an apartment furnished in a rustic style. But finding it in stores is far from easy, but affordable price and not at all possible. There is no need to rush to search online stores, because you can easily make it yourself. Let's consider two versions of the product, which differ from each other in the degree of difficulty of production.

Self-assembly of a simple design product

To make a wooden chandelier of a similar design with your own hands you will need the following:

• Wooden beam of square section 10x15 cm.
• Battery-powered LED lamps.
• Chisel.
• Hammer.
• Needle file.
• Drill.
• Antiseptic.
• Sander (fine and coarse sandpaper).
• Stain.
• Hanging hooks.
• Chain.
• Linen rope.

DIY wooden chandelier
Chandelier made of wood and bottles

Basic energy-saving lamps and their features.

Assembling a wooden chandelier with your own hands is as follows:

1. We mark the future location of the lamps on the timber. Draw contours of appropriate sizes.

2. Using a drill, we make many holes inside the contour, splitting the wood as small as possible.

3. Using a chisel and hammer, knock out the excess wood. It is advisable to make the holes through.

4. Using a needle file, level and sand the inner sides of the squares.

5. Sand the entire surface of the timber by hand or with a grinder.

6. We treat it with an antiseptic in several layers.

7. Protect the surface sandpaper the finest grains, cleaned from dust.

8. Cover the timber with stain of the desired color.

9. C reverse side products and make holes on the ceiling for hanging hooks.

10. Cut off sections of the required length from the chain and attach them to the hooks on the beam.

11. To enhance the decorative effect, we wrap linen rope around the edges and in the middle in several rows around the beam. The ends of the segments are fixed liquid nails.

12. We insert light bulbs into the holes, which are fixed in the sockets with liquid nails.

13. Instead of LED lamps, you can insert sockets into which energy-saving light bulbs will be screwed. The wiring will be hidden from the top of the product and in the fastening chain.

DIY veneer chandelier
DIY chandelier from branches

DIY options step by step master class from various materials.

DIY assembly of a wooden chandelier of a more complex design

To make a more complex wooden chandelier with your own hands, you will need the following tools and materials:

• Untreated or debarked logs.
• Shingles ( wooden slats) 2.5 cm wide and 0.5 cm thick.
• Linen rope.
• Ammo.
• Coarse and fine grain sandpaper.
• Stain.
• Chainsaw or hand.
• Drill and cutter.
• Screws with bolts.
• Solvent (turpentine, acetone or gasoline).

The product is manufactured as follows:

1. A third of its thickness is sawn off along the log (a fourth is possible). You will need three of these blanks.

2. Their length is determined individually depending on the desired dimensions of the product.

3. Bark is removed from untreated logs.

4. The surface of the workpieces is wiped with a solvent to remove any resin that has emerged.

6. Then they are folded into a triangle, so that one edge of the workpiece overlaps the edge of the other, and the second lies on top of the edge of the third.

7. Marks are made at the joint for drilling. In the center there is a large hole for the cartridge, on the sides there are smaller ones for screws.

8. Large ones are cut out with a milling cutter through holes with a diameter that allows you to insert a cartridge into them. A drill is used to drill through holes of smaller diameter for screws.

9. Closer to the vertices of the triangle, three more holes are drilled from the sections of logs to thread through them the ends of the rope on which the product will be suspended.

10. The surface is sanded with fine sandpaper.

11. The shingles are sawn into small parts the same length.

12. Lampshades are assembled from chopped shingles, which were previously coated with antiseptic and stain. Two parts are placed parallel to each other, two more elements are placed on their edges, which form a square. One lampshade consists of 24 elements.

13. Fastening of parts in the lampshade is carried out using liquid nails.

14. The blanks are coated with antiseptic and stain, assembled together and fixed with screws and bolts.

15. Lampshades are glued to the blanks using liquid nails or wood glue.

16. The assembled product is varnished.

17. The edges of the ropes are threaded into the holes, which can be hung, for example, on a hook.

You can make a completely elementary version of the product, which is presented in the form of branches tightly tied together. They can be painted or varnished, and lamp sockets with lamps are hung on long cords from above. This option is suitable for a home in a minimalist or eco-style.

We all know that the highest quality and useful material For interior design any room is a tree. Lamps made from this material are especially beautiful. This is due to the fact that correctly selected lamps in combination with wood provide a soft and pleasant light, just suitable for rest and relaxation. Where else can we relax if not at home?

It is worth noting that while possessing unquestionable advantages, such products are quite expensive. But if desired and with due diligence, such a lighting device can be made with your own hands. At the same time, you can save a lot of money and get a unique and beautiful chandelier.

Why tree?

In the modern world, where plastic has begun to play an increasingly important role, and wood has faded into the background, it still does not intend to give up its position in the interior. Today, due to the prevalence of plastic, wood has become a more expensive and presentable material, which is not accessible to all people. This is due to the fact that wood has the following advantages:

• 100% environmentally friendly. Only wood is an environmentally friendly and natural material that undergoes a minimum of modifications during processing;
• a positive effect on the human psyche and his emotional state;

Note! Pine and spruce have the best relaxing effect. Such lamps are especially useful for patients with asthma, as well as for chronic diseases respiratory tract.

• pliability of the material for processing. Lamps of any complexity and any appearance can be made from wood;
• positive associative series. By using wood in the interior of a room, you will achieve greater comfort and also give the room a more impressive look;

Wood and interior

• exquisite and beautiful appearance, which will fit perfectly into both modern styles, and traditional;
• the ability to change the emphasis in the room or emphasize a single design idea;
• availability of wide scope for creativity. Here, thanks a large number tree species you can let your imagination run wild;
• a large selection of species for the manufacture of lighting fixtures (chandeliers, wall or table lamps);
• excellent combination of wood with other materials (glass, steel or openwork forging, paper, fabric, plastic, etc.).

The easiest way to make a lighting device with your own hands is from wood. Especially if it is a ceiling chandelier.
However, despite the rather impressive list of positive aspects of working with wood, it must be remembered that there are certain disadvantages here too. These include:

• wood can easily catch fire. You should not use light bulbs in such devices that become very hot during operation;

Note! Wooden lamps most often use LED or fluorescent light bulbs, which do not create a fire hazard.

• the need to protect the material from the adverse effects of environmental factors: humidity, temperature and insects. Exactly ceiling chandeliers most malleable negative influence wood insects. It is noteworthy that lamps made of pine or pine needles are less susceptible to damage by insects;

Antiseptic treatments

• high cost of material, especially rare and exclusive breeds;
• During drying, the chandelier may change its volume and also become deformed. As a result, cracks or chips may appear on the product.

These shortcomings, as well as ways to combat them, must be taken into account if you decide to make a chandelier for the ceiling with your own hands. Ceiling chandeliers, like other types of lighting fixtures, are quite easy to make with your own hands, especially if you know the detailed instructions for this process.

What you will need

The set of what you will need when assembling a chandelier for the ceiling with your own hands may vary depending on the complexity of the design you have chosen. But the general list of what you will need, regardless of the model you choose, includes the following tools:

• a set of tools for working with wood (for carving, etc.);
• wire pliers;
• hammer and screwdriver;
• tape measure or ruler;
• drill;
• pencil;
• set of brushes.

In addition, you will need the following materials:

Decoration materials

• antiseptic agents for treating wood to make it more resistant to adverse environmental conditions;
• elements old chandelier: base with plinth, light bulbs, wires, etc.;
• decorative elements to give the ceiling lighting fixture the desired appearance. These can be a wide variety of things: cups, fabric, paper, badges, strings, etc.

We clarify that this is only an approximate list of necessary materials and tools. It can be easily supplemented with other devices that can simplify or improve the work ahead.

When assembling a ceiling chandelier with your own hands, you must follow the following rules:

• the tree must be protected along its entire perimeter with a special solution. This DIY ceiling chandelier will serve you for a long time without compromising its performance;
• To protect wood, you must use only high-quality products that have not yet expired. Otherwise, all your actions will come to naught in just a few years of using the product;
• take care of the system for attaching the chandelier to the ceiling. Stylized chains can be used as fastening elements. The best solution There will be a multi-point fixation system. The fact is that the design can turn out to be large and relatively heavy. Therefore, it is necessary to create maximum conditions for safety;
• when connecting the chandelier to the power supply, use the services knowledgeable person to avoid burning the device and causing electrical injury.

Lamp options

Homemade ceiling chandeliers made of wood can have the most incredible shapes and sizes. After all, there are a great variety of tree species. Here everyone can show their creative talent and create something new and unique.

Various options

In our article we present several of the most popular and spectacular types of ceiling-type chandeliers. But you have the right to modify or improve them so that they are more suitable for your room interior.
Let's look at them separately

Coffee service

Creating holes

This is a very beautiful type of chandelier that can be used in both the kitchen and living room. Here we take a board as a base (ash, birch, spruce or pine is best) and carry out the following manipulations with it:

• drill holes in the board;
• cover the board with stain after it has been sanded. If oak was taken, then you can do without painting and opening it with varnish;
• We take several cups of coffee and saucers to go with them. You will also need wires and rings, an equal number of cartridges and twice as many rubber gaskets;
• make holes in cups and saucers. To do this, you need to use only a special drill for working with tiles or glass;

Note! You need to drill slowly and very carefully.

The chandelier is ready

• Insert sockets with wires into the holes made and secure them;
• Next, we attach the resulting chandelier to the ceiling.

If desired, the lamp can be decorated. But the cups themselves are already an excellent decor. Remember that the main thing is to maintain the style, and not just hang on the chandelier everything that is unnecessary in the house.
If desired, such a lighting device can be hung by chains, attaching rings to the sides of the board.
The most difficult thing about such a chandelier is drilling holes in the ceramic cups and saucers, as well as connecting the product to the power supply.
In general, we can say that such a model is quite difficult to make with your own hands. But don't despair, there are much easier models to implement.

And the driftwood will come in handy

Scheme of cuts

An easier way to create a chandelier is to use ordinary driftwood brought from the forest. Moreover, light bulbs in this situation can play the role of stylized fruits, leaves or other decorative elements. The main difficulty here will be masking the wires.
The assembly of a ceiling-type chandelier made of wood in this case will proceed according to the following scheme:

• choose the branch that you like best with its curves;
• we clean its surface from excess bark, lichens and moss;
• then dry the driftwood well and sand it using sandpaper;
• choose the light bulbs that best match the stick you have chosen. Use only energy-saving and low-heat light bulbs;
• to lay the wires, we make shallow cuts into which they will later be placed;
• in case of failure, all unnecessary cuts can be easily disguised with putty;
• Light bulbs should be placed on the edges of such driftwood. At the same time, they can be placed in lampshades or simply fall from the branches. Both options will be quite original.

Final result

Here you can use a wide variety of decorative elements: beads on a string, glass balls from an old chandelier, soft toys and other materials. Thanks to this, your craft will become unique, unusual and inimitable.
You can hang such a chandelier using screws or chains. In the first case, you will receive a ceiling model, in the second - a suspended one.

Other options

Country style

Another popular option is to assemble a lamp in a country style. For this you will need boards irregular shape. They should be processed using the brushing technique and covered with stain. We install lampshades along the edges of the boards and, in fact, that’s it - the chandelier is ready.

In addition to driftwood and boards, you can use any household items containing wooden elements. For example, excellent option there will be an old wooden wheel small size. We process it by analogy with other chandelier options:

• first we clean it from dirt;
• then process with sandpaper;
• apply stain.

After these manipulations inside wheels, we run the wires, securing them with clamps. This will make them invisible. Next, we either make holes for the cartridges, or hang them at a short distance from each other.

Wheel chandelier

To ceiling mount such a lighting fixture, we use a powerful fastening system. This is due to the fact that the lamp will be quite large and weighty. Therefore, it would be best to place the chandelier on chains.
As you can see, almost any wooden object can be used to create a ceiling lighting fixture on your own. It could even be half a wheel, various old wooden lamps, hand carvings from wood, or other crafts. That’s why such lamps are good if you want to move away from ordinary lamps and get something original and unique. Behind last years handmade style has become very popular. One of its main advantages, along with uniqueness, is the complete environmental friendliness of the manufactured products. And a chandelier made of wood in this case is the best confirmation.
Making a ceiling-type chandelier from wood with your own hands is quite possible, using a wide variety of materials. Don’t forget to treat the wood with special protective agents, and in all other respects, just make your desires and fantasies come true. Be consistent and you are guaranteed an excellent result at the end of the job!

One day you will want to be transported to an atmosphere of harmony and peace. Nothing decorates interiors more than using natural wood. This trend will always be fashionable, the most favorite material of designers for decorative and finishing works. Looking for proper lighting For your home, feel free to choose wooden chandeliers. You can hang such an “antique thing” both in a country mansion and in a museum, restaurant, or apartment.

Peculiarities

Whatever style you are a fan of, wooden chandeliers will harmoniously fit into the atmosphere of bedrooms, living rooms, and halls. Japanese, Chinese, vintage or eco style are most suitable for realizing your design idea. Despite their massive size, wooden chandeliers bring a sense of peace of mind to any room.

Wooden lamps represent a somewhat rough, clumsy work of a craftsman. You can successfully combine cart-shaped models, wheels with lamps that imitate candles. There is a colossal amount of LED lamps and incandescent lamps for them. Country or antique stylized cafe, bathhouse, hotel reception, as well as home interior, will instantly be transformed with such an accessory.

You can choose beautiful hanging and ceiling designs. Absolute must have- huge castle, large and miniature models. They can be made entirely of wood, have only a few metal elements and vice versa

The obvious advantages of wooden chandeliers are:

• environmentally friendly, non-toxic natural material;
• a large assortment of collections made of wood of various species;
• ease of processing and installation;
• instant transformation of interiors even in modern styles (kitsch, loft, urban chic, etc.);
• combination with many materials (metal, glass, textiles).

Despite the increased flammability of wood, poor “contact” with rooms where there is an excess of humidity, frequent temperature changes, a wooden chandelier is still popular. It “wins” over other devices with its aesthetic qualities.

Special impregnations help to avoid delamination, deformation of wood, the appearance of insect pests, and accidental fire.

A reliable and practical pendant lighting fixture has become a real symbol of luxury. It is he who sets the general mood of the room and successfully emphasizes strengths interior

Combination of materials

Particular attention should be paid to the combination of wood with other materials. Feel free to combine natural wood with metal, glass, stone, paper, all kinds of draperies, and acrylic. Depending on the chosen “tandem” you will achieve certain touches in the interior decor.

They have proven themselves to be excellent during the operation of the product. from beech, oak and pine. They combine perfectly with metal elements. With such a device, the notes of Gothic, Middle Ages, and strict classics will sound in your home. Glass and solid wood construction will evoke loft, country and rustic motifs. Provençal “duets” made of wood and textiles bring special comfort, romance, and touching.

When buying a wooden chandelier, pay attention to what its components are made of:

• decorative fittings (models come with forging, with a wooden hoop, carved, they can be decorated with both textiles and bronze);
• diffusers (plafonds, lampshades);
• type of fastening (metal hook, durable bar, can withstand heavy weight);
• the lamps themselves, their shape, size, etc.

In style interiors Baroque, Rococo, Bourgeois, Empire chandeliers made of aged wood have proven themselves excellent. Even the smallest models will become the main accent of the interior, setting the right mood for guests and owners of an apartment, house, or restaurant.

By choosing wooden lamps from hardwood, you will enjoy the beautiful texture and color scheme of the entire model range.

By giving preference to pine, you will receive a dizzying aroma of pine needles, have a real device for relaxation in your home and healthy sleep. Luxurious pine products provide comfortable lighting throughout the room.

The chandelier itself can be made of high quality plastic with wooden frame. This is a bold attempt to combine several stylistic trends and even eras. Such products will harmoniously fit into modern interior styles (minimalism, eclecticism, kitsch, country, etc.).

A wooden chandelier on chains adds a special charm to the room. It can represent an elegant wenge-colored beam, a barbell, or even a ship’s steering wheel. There are a huge number of varieties of shapes and sizes.

Models and types

The desire to live in a pirate room, to feel the spirit of the Middle Ages or the avant-garde is a matter of taste. So, 3-horned ones will look elegant ceiling lamps with textile lampshades, pyramid-shaped products, etc. Before purchasing a wooden chandelier, decide on the type of model:

Suspended structures must be equipped with a suspension in the form of a chain or cable. The product cannot do without a durable metal hook. You can purchase a similar type of wooden chandelier for rooms with a ceiling height of 2.5 m.

• Ceiling models will be attached above the head due to mounting plate. You can choose designs made entirely of solid wood or with some wooden elements.

When did you find best option for the ceiling, it is also important to choose the right type of light bulbs. To avoid fire, it is better to opt for LEDs or energy-saving fluorescent products. Fireproof, they will not heat up during operation.

• Textiles look perfect in combination with natural wood. Lamps with lampshades- a symbol of warmth, comfort and hospitality. The overall atmosphere of the interior will depend on what print you choose for them. Checks, polka dots, abstract patterns, small floral patterns, strict geometry - try to combine the colors of furniture, curtains and other elements with the color scheme of the chandelier.

• Among the wide variety of models you can find exquisite wooden sconces for the bedroom. They are made in any form and add mystery and some mysticism to the interior. For the children's room, it's time to “arm yourself” with a funny model in a pirate style. A flat “anchor” chandelier in wenge color goes perfectly with wooden furniture, floor coverings from the board.

• In the kitchen, living room you can choose a classic chandelier without frills. Three- and five-arm models with faceted or frosted glass, fabric and paper lampshades give special comfort to the most “angular”, eclectic interiors.

Current styles

Designers consider the main styles into which a wooden chandelier fits harmoniously oriental, eco, country, classic and modern. But this does not mean that such an element cannot be hung in a room where the spirit of rustic, Provence, vintage, Gothic or Baroque reigns. Decor masters recommend adding notes of antiquity to offices, spacious halls and modest living rooms.

The chandeliers will fit perfectly into the concept of country, eco, and Oriental styles. Feel free to choose branchy ones, models in the form of a cart wheel, as well as products suspended on ropes or chains from the ceiling.

There are also antique options that can recreate a picture from the times of the avant-garde, romanticism, and the Middle Ages. Flat-shaped wooden chandeliers will look original. They should have lamps that imitate candles. You can add notes of simplicity and comfort using rustic style and chandeliers in the form of bars on a rope. It looks great in the interiors of kitchen-dining rooms and living rooms.

Japanese style involves the use of a wooden chandelier in combination with a material such as silk. Forged inserts and fashionable engraving add richness to the accessory. Any east direction uses proper geometry, so your lighting fixture should have a clearly square, rectangular shape and also be symmetrical.

Antique chandeliers take you back to the past and add illusory, special magic to the room. They are perfect for designer styles chalet, Provence, retro. Try hanging vintage designs in your bedroom or living room for instant peace and tranquility. Natural material is environmentally friendly. It transfers heat well and is flexible different types processing.

Experiment with styles and shapes of models. Now is the time to install such a structure in a cottage, country mansion, sauna or bathhouse. You won't spoil general form rooms, if you hang a product made of coniferous or hardwood as:

• several bars or planks;
• branches intertwined;
• boards neatly laid in a row or perpendicular to each other.

Many modern models fit harmoniously into the Art Nouveau style. Most often, designers add glass, metal or textile elements to wood. Strict and restrained options will complement the classic atmosphere, more intricate shapes will decorate the room in eclectic, eco, kitsch, etc. styles.

Pay attention to products with spotlights built into solid wood. They will not only highlight your excellent taste, but will also become a practical, functional appliance in the home.

The most beautiful modernist chandeliers are considered to be models with frosted glass inserts. They will create a complete composition together with other elements of the room: upholstered furniture, baseboard, floor and wall covering, other finishing materials.

Color solutions

Partially color range try not to go too far from natural shades. The wood should retain its unique texture and emphasize your love for eco-themes, classic elegance and avant-garde things. For spacious rooms, it is better to select a visible “spot” of a dark color. The black base and shades add sophistication and elegance. This option is especially suitable for offices and will emphasize the status and prestige of its owner.

Striving to classical motifs, look at the color of the wooden chandelier, like cherry, wenge, bosse, oak or walnut. But in modern interiors Cylindrical or spherical lampshades in shades of Karelian birch, cedar, mahogany, and mahogany will look original.

The light palette adds sophistication and brings a relaxed, romantic mood to the atmosphere.

Provence style can’t do without elegant designs made of vine and walnut twigs. The shade you choose should be associated with sophistication, grace and lightness. Experts advise lovers of Gothic style to “arm themselves” with models with the effect of aged wood, forged parts and openwork elements. All this should be placed in the background wooden base in dark color.

Fans loft premises, attic style, most likely, use chandeliers in the form of bars and boards. In addition to lamps and light bulbs, they can be installed glass jars, flower pot, wicker basket. It would be preferable to choose the color of mahogany, brick or dark brown. In this case, it is worth using ergonomic fluorescent or LED bulbs With long term services.

Shapes and sizes

Among the colossal variety of shapes and sizes, the most popular wooden chandeliers are round and angular. A more complex “geometry” is suitable for luxurious mansions, spacious halls, halls and will not fit into a cozy, modest kitchen, living room, or bedroom. Here it is worth looking at ceiling mounted structures in the form of a wheel or steering wheel with lamps beautifully arranged around the circumference.

For classic, gothic, medieval style, use a candle lamp with imitation of fire in the wind. And minimalism, constructivism and even techno can be decorated with the help of a square lighting fixture.

Rectangular chandeliers made of wood with uneven edges can consist of boards and bars. These elements are often connected to each other by nails, ropes, ropes or chains.

Large bulky chandeliers evoke a feeling of well-being and luxury. With such an accessory you will always feel in your comfort zone, and your life will look like a royal one. Practice shows that the place for massive lamps is in spacious rooms (restaurants, country houses, hotel halls, etc.).

Small chandeliers will fit well into the interior of an attic, loggia, small living room or dining room. Interesting solution There will be 3-arm models, options with shades made of fabric to match the furniture set, upholstery, curtains or wallpaper.

Review of manufacturers

Among popular manufacturers wooden chandeliers The Italian brand is considered the leader in sales Velante. In her collections you will find both floor lamps, sconces, and tabletop appliances, spots, LED chandeliers with original casings made of quality material. Such models can add charm to any interior.