Make a bed frame from metal. How to make a bed with your own hands from metal? Attaching the slatted bed bottom

An iron bed can be luxurious and simple, discreet and flashy, made in classic and ultra-modern styles. The only characteristic common to all models is strength and reliability. However, the price of such pieces of furniture is not affordable for everyone, and a do-it-yourself metal bed will save money and get an original product of its kind.

Difficulties at work

Making welded or forged beds with your own hands is quite difficult. The process of metal processing is labor-intensive and scrupulous. Before you begin directly making such a piece of furniture, you need to soberly assess your abilities and skills.

Manufacturing requires at least basic knowledge of blacksmithing, so if you don’t have it, you need to take a few lessons from a master or arrange for his help. Otherwise, there is a high probability of spending a large number of time and not get what you want as a result.

A homemade welded metal bed is a little easier to create with your own hands. But here it will be necessary welding machine and the ability to use it, as well as preliminary preparation parts (cutting, bending, etc.). The necessary specific tools must be available, which not everyone has.

Types of structures

Iron beds were widespread during the Soviet era, when quality and durability were always in the foreground, and the appearance did not always satisfy consumers. Therefore, many users still have a stereotype about unsightly headboards and creaky springs.

Today, metal beds have become works of art. Some models have superior aesthetic characteristics to luxurious wooden beds.

By creation method metal constructions there are:

Forged, for the manufacture of which pipes with sections of various diameters are used. Forging can be cold (all processes of changing the shape of workpieces are carried out using a special stamping-type apparatus) and hot (before forming, the metal is heated to 600°C and the work is done manually using a hammer).
Welded - involves joining parts by welding, but the workpieces are produced by forging.

Regardless of the method of creation, the main elements of the bed are: the frame (the support of the entire product) and the frame (the base on which the mattress is located), the legs and the back (headboard). The last component has an aesthetic function, and its creation is given the most attention and time. In addition, the headboard can be purchased in a retail chain separately from the bed itself.

Sizing

The dimensions of a bed are influenced by 2 factors: the number of people who will use it and the available space for installation.

The bed model depends on the size of the bedroom. A luxurious backrest will look awkward in a small area, and in large apartments it is inappropriate to install a narrow bed with a low headboard.

Depending on size sleeping place the bed can be:

single, intended for use by a child;
one and a half, on which a teenager can sleep comfortably;
double – intended for use by two people.

The larger the bed, the more space it will take up in the room. Given the need to install other pieces of furniture, there may not be any room left to move freely. Therefore, sometimes you should refuse to purchase or make a metal bed.

If all the requirements for comfortable accommodation are met, you can begin to create a drawing and make a bed with your own hands.

Step-by-step technology for creating a metal bed

Making a metal bed at home is not easy, but if you follow the rules and technologies, it is doable. The whole process is divided into preparatory work, assembling components together and finishing finished product.

When making metal beds with your own hands, at each stage it is necessary to sand the sharp edges of the cuts and level the seams with a grinder.

Tools and materials for work

To make a welded bed from profile pipe, first of all you will need a welding machine. In addition, the following must be available:

electric angle grinder;
powerful drill with metal drills of various diameters;
tape measure and square;
file and sandpaper, brush with metal bristles;
primer, paint and varnish intended for coating metal products;
brushes

If you plan to independently create a bed from corrugated pipes using the forging method, you need to acquire forging equipment, equipped with different forms for bending metal, these are:

cochlea (spiral elements);
flexion (bending at an angle);
flashlight (parts in the form of flashlights);
twister (twisting along the longitudinal axis);
volumetric;
wave (to create wave patterns).

The use of hot forging requires the presence of a forge, anvil, sledgehammer, hammer, tongs, handbrake and slaps.

Depending on the final result, the manufacturing process may involve the use of all metal processing methods.

Blueprints

Drawing a drawing involves creating a schematic drawing of the finished product indicating the dimensions of each part, attachment points, and location of functional elements.

Furniture stores offer a wide variety of iron beds - they fully correspond to the idea of an ideal bed. However, they often cost a lot of money, and not everyone can afford it. good bed with a metal frame. The situation is that the mattress, as the base of the bed, is only a certain part of the price. The rest of the amount is an overpayment for the brand, for the unique frame design, as well as for various decorative elements.

You can get a good and comfortable bed for much less money if you have basic skills in working with tools and metal. A bed frame made of wood or metal, made independently, is an opportunity to save money. For many, it is preferable to use wood as the main material - wood is easier to process, but a metal product, especially in the form of a double frame, will look more stylish, serious and elegant.

Metal bed in the interior

Iron beds can be in strict forms without any decorative frills - this will give the room elegance and consistency. Also, a metal stock can be luxurious - manufacturers use expensive alloys as materials. Such models will add sophistication and extravagance to the room. Hardware Due to the patterns on the back, not taking into account the weight, they look lighter.

In addition, it is necessary to take into account the high strength, which differs tens of times from the strength of wood. Many will say that the metal itself is cold - yes, it is. But modern manufacturers spray on metal surfaces special coating, cover parts with paints and varnishes, which, among other things, protect against corrosion.

Aluminum profile pipe, rectangular steel profile, a huge selection of different alloys - all this makes it possible to produce various original designs V modern styles– high-tech and modern. You can use not only metal, but also plastic or wood.

You can get a relatively affordable product by investing money, time and effort - a DIY metal bed will look very impressive. Often, homemade furniture much more interesting than the offers of furniture brands. Take a look at the photos of such solutions.

One disadvantage of metal solutions is the bending of profile tubes after long-term use. The total cost of a metal bed depends on the type of alloy, quantity Supplies and components, on quality paint and varnish materials and from labor costs.

Preparatory work

The first thing to do is measure the dimensions of the mattress. A huge and comfortable bed is great, but often you have to work with what you have. Mattresses can be single, one-and-a-half or double. The choice here is up to the master. When a solution is found, work can begin. Mattresses have standard sizes. So, the length can be 190, 195, 200 cm, the standard width is 80, 90, 120, 140, 180, 200 cm.

The technology for making a bed on a metal frame is much more complicated than if wood were used. To work, you need a welding machine, angle grinder or grinder, as well as other tools for metal processing. The metal frame can be of various designs.

For the manufacture of iron bed With your own hands you will need a corner 40×40 mm, as well as a channel 65×32 mm - the base will be made from these materials. Legs, racks and crossbars will be made of 20x20 mm profile pipe.

Manufacturing process

1. First, do the backs. Workpieces of the required sizes are cut from the profile pipe and laid out on a flat surface. The workpieces are securely fixed and then connected by welding. During the connection process, right angles are controlled - the two sides of the structure must be the same length.

2. Then take a grinder and a channel. 2 central and 4 side brackets are made - they are intended for fastening the frame. Each such bracket must have a beveled tenon at an angle of 5 degrees. The frames are then laid on these tenons. The finished parts are connected to the backs and frame at a distance of approximately 350 mm from the floor. In the future, these elements will experience the entire main load - it is necessary to weld with a continuous seam along the entire contour.

3. A channel and a corner are used for frames. The material is cut into blanks. Their length corresponds to the side of the frame and the size of the mattress plus a few sentiments. The channel pieces are connected using an angle. In the horizontal flange of the corner, sections are cut off - this is better for joining the part to the channel. Then these joints are welded with a continuous seam.

Frame installation diagram

4. The backs are set vertically, frames are placed and future grooves are marked on the lower shelf of the channel. Next, small holes, 8-9 mm in diameter, are drilled. Fit the groove under the tenon with a soldering iron with a square tip.

5. Next, a mattress grate is made from a steel strip - it is simply welded onto a metal bed frame. Thrust bearings and plugs on the upper ends of the pipes are installed on the backs - this can be made from a steel sheet.

6. All seams are processed with a grinder, having first thoroughly cleaned these places of slag. Afterwards, the entire structure is processed with selected finishing materials. In this way, a single or double bed, or any other required size, is made.

Example of finished work

On video: DIY bed on a metal frame.

Finishing

Now you know how to make your own bed frames. But this is not the end. Required decorative treatment designs. The coating is applied to the metal for a more aesthetic appearance of the product. But first, the welds are cleaned of slag using metal brush, then work grinder.

For the most even and beautiful surface, special grinding discs are used. They are thicker than regular discs. Uneven seams are smoothed with a roller to the base metal. Next, each seam is carefully sanded and polished.

You can make a bed frame with your own hands in just 3 days. The first will go to finding the necessary materials and tools, and the remaining two will go to assembling the finished structure. Thanks to correctly selected sizes and a hand-created design, it will delight its owners for decades. And it will also allow them to save a lot of money.

Making a wooden frame

It’s easier and faster to make a bed base from solid wood

The easiest way to make a bed base is from solid wood. It is non-toxic, easy to process and perfectly complements any interior. And a sufficient number of varieties of wood allows you to choose best option at price and quality for yourself. Among them you can choose budget options- pine or birch.

In the first case, the finished bed will delight you with a pronounced wood texture, which can be emphasized with stain and safely installed in a room with high humidity. In the second, you shouldn’t hope for a chic pattern, since the fibers of birch are less pronounced than those of pine. But the frame from it turns out stronger and lighter.

In the middle price category, preference is given to cherry, hazel or oak. The latter is especially popular due to its good quality characteristics and noble texture. The elite class includes exotic species - teak and wenge. They are used to make beds designed for bright, modern interiors, often based on contrast and play of color.

Tools and materials

The dimensions of the future bed are determined by the dimensions of the mattress

Quantity necessary materials depends on the dimensions of the future bed. And those are determined by the size of the mattress. It is better to purchase it in advance furniture store or do it yourself. Based on the available data, a drawing is drawn up. When creating it, tolerances of 1-1.2 cm on each side are necessarily added to the dimensions of the mattress so that it takes its place at the base.

There is no point in postponing the search for a mattress until later, since they are produced according to standard or custom sizes, which are almost impossible to guess.

The selection of materials is carried out based on the received drawing and personal preferences. For a standard double bed you will need:

2 boards measuring 200x30x3 cm (for side walls);
5 boards (160x30x3 cm) for the front, rear walls and headboards;
6 bars (200x5x5 cm) - they are used as support and load-bearing elements;
22 slats (160x5x2 cm) for the base under the mattress and fastening the headboard;
3 boards (200x30x3 cm) for making legs and an intermediate support bridge;
self-tapping screws;
ribbon;
wood glue;
stain;
beeswax or varnish to treat wood and protect it from adverse effects environment.

Set of tools:

jigsaw;
screwdriver;
drill;
screwdrivers;
stapler;
hacksaw;
plane;
sandpaper;
pencil, tape measure, ruler, square and other measuring instruments.

Blueprints

There are a huge number of options for ready-made frames. The latter can be single, one-and-a-half or double, square or rectangular, with podiums and a pull-out bed or chest of drawers underneath, with or without a high headboard and an additional shelf on it, and finally, with or without adjustable moving mechanisms. The main thing is that almost all of them can be assembled with your own hands. The number and dimensions of finished elements, as well as variations of finished structures are shown in the drawings.

Step-by-step manufacturing instructions

Marking the boards for the front and rear walls for fastenings for 3 vertical support bars. The mounting location depends on the desired depth of the mattress. Simple calculations will help you determine this distance. To do this, sum up the depth of the mattress in the box (5 cm), the thickness of the slats under the mattress (2 cm), and the thickness of the supporting longitudinal beams (5 cm). It follows from this that the vertical bars need to be attached 12 cm below the top point of the back and front walls.
Fastening 3 bars using self-tapping screws. They are selected based on the thickness of the walls and the bar. It is important to ensure that the 2 outer bars are 3 cm away from the sides of the back and front walls. This distance is equal to the thickness of the side wall.
Screwing the side walls flush to the front and back.
4 supporting bars are attached to the resulting 6 fixed vertical bars horizontal bars along the perimeter of the bed frame. Moreover, they are also screwed to the walls of the structure with self-tapping screws in order to ensure its strength. Together with the intermediate jumper, they perform a load-bearing function. The jumper itself is screwed to the middle vertical bars of both walls. The joint is joined using a cut with a depth equal to the thickness of the horizontal support bar.
Attaching the planks across the structure to the supporting elements using self-tapping screws. You need to step back from the front and back walls by 2 cm and maintain a step of 5 cm. Additionally, the planks are fastened together using tape and a construction stapler.
Screwing to the side walls from the outside of the legs. Their height is determined individually. The main thing is that their bottom edge is flush with the bottom point of the back and front walls. To do this, it is better to turn the frame over so that the future legs are at the top. The resulting ends are coated with wood glue.
Attaching additional boards to the back and front walls. It is better to treat the connecting longitudinal edges with wood glue.
Decorate the headboard at your discretion by rounding the corners with a jigsaw or giving it a fancy shape. If you have special skills, you can cut geometric figures or plant elements on it. Additional strength of the headboard will be provided by 3 slats, which are screwed with self-tapping screws from the outside.
Process the finished frame with fine-grained sandpaper. Special attention is given to corners and various irregularities.
Decorating the frame. A stain is applied to it, and after it dries, a varnish is applied. It is better to give preference to quick-drying, polyurethane, or special acrylic. If necessary, these products are applied in two or three layers.

This instruction allows you to make the simplest box for a bed. If you have special skills and the right tools, you can create real masterpieces by improving the stages of work described above.

Video instructions for making it yourself

Nothing can tell you more about the intricacies of making bed frames with your own hands than a visual video:

Gallery of ready-made options

Rich imagination, experience and limited space allow a person to create a wide variety of bed frames. Below is a selection of the most popular:

Making a metal frame

There are a huge number of varieties metal frame

To make a metal box, straight-seam thin-walled pipes and rods are used, which are made of brass, steel, iron or galvanized metal. Elements of such structures are connected to each other by welding or forging. In the latter case, fantastic frames are obtained, which are designed to decorate the brightest and most unique interiors.

Tools and materials

To make a frame measuring 2 m by 0.9-2 m, you will need steel pipes:

4 things. dimensions 90x2x2 cm for the backrest;
2 pcs. (200x2x2 cm) for its upper crossbar;
2 pcs. (80x2x2 cm) for the bottom;
4 things. (60x2x2 cm) for the foot stand;
1 PC. (168x2x2 cm) for the lower leg crossbar;
2 pcs. (25x2x2 cm) for legs;
16 pcs. square (80x1x1 cm) for the manufacture of transverse parts.

And also steel channels:

4 things. (200x6.5x3.2 cm) for drawers;
2 pcs. (12x6.5x3.2 cm) for the manufacture of central brackets for frames;
4 things. the same dimensions for the side brackets;
4 steel corners (100x4x4 cm) for the end elements of the frame;
2 steel strips (200 x 2.5 x 0.2 cm) for the base for the frame;
6 steel strips (100x2x0.4 cm) for the base under the mattress;
10 steel sheets with a diameter of 2.5 cm and a thickness of 0.2 cm for making bearings for the racks;
4 steel sheets measuring 2x2 cm of the same thickness for the production of plugs for the upper crossbars.

When purchasing material, you can order the service of cutting it into necessary details. This is convenient, especially if you have no experience in performing such work. And in this case there will be no waste left. If you plan to cut metal yourself, it is better to take 10% more of it. They will go to trimming.

Set of tools:

Bulgarian;
welding machine;
drill with 9 mm drill bit;
tape measure, special square;
square file;
hard brush for cleaning;
sandpaper;
primer for processing metal structures;
brush, paint, varnish.

Blueprints

There are a large number of drawings of bed frames. Among them, you can choose the best option to suit your taste and budget.

Work order

Marking and cutting metal. It is carried out on the basis of an existing drawing, which, in turn, is prepared based on the dimensions of the mattress.
Manufacturing small and large brackets with tenons for fastening from channel scraps for the frame. In general, 2 central parts and 4 side parts are needed. Metal cutting must be done in such a way that a 5-degree bevel remains for each tenon.
Welding the brackets along the entire length to the back at a distance of 35 cm from the floor. High-quality implementation of this stage is the key to the durability of the structure, since the bracket bears the maximum load.
After finishing work with the back, you can begin assembling the frame. Instead of one, it is recommended to make 2 frames; this will simplify the process of assembling and transporting the finished bed. The frame is made from the channel, and the end parts of the frame are made from metal corners.
Drilling counter holes in the frame for the tenons from the brackets according to the marks made in advance. They need to be carefully double-checked, observing the dimensions, since any inaccuracies will lead to rework. If necessary, the diameter of the holes is increased with a metal file.
Welding steel strips to the finished frame (2 longitudinal and 6 transverse). They will perform the function of a grid.
Welding footrests and caps for bed posts.
Cleaning the finished structure with a stiff brush, processing it with a grinding machine and polishing it.
Treating the frame with a layer of primer for better adhesion of the paint to the surface and sanding it after drying.
Decorating and painting. It is better to do it with an airbrush, and if it is not available, with a brush.

Video guide: how to make a metal frame

The process of cutting metal and assembling the finished structure is captured in this video:

Examples of created products

A real metal bed frame is always fashionable and beautiful. You can verify this by looking ready-made options designs.

Which frame is better in which case?

It is worth noting that both of these frames are called orthopedic. The choice of one of them is individual and should be based on personal wishes and the existing interior.

However, the metal frame is considered to be stronger. It is resistant to deformation and negative environmental influences. It does not creak and is great for rooms with high humidity.

In the same time wooden frame made easier and faster. It never goes out of fashion and suits any type of interior. Careful selection of material allows you to extend its service life.

To make a frame for your bed, you can choose either noble wood or solid metal. In any case, accuracy, precision, attention to detail, patience and the desire to create will help transform it and create the design of your dreams.

Experiment, believe in yourself! And then everything will work out for you!

A person spends a third of his life in the bedroom, so a good choice of design and, of course, the central element of the room - the bed - is the most important criterion for a good mood and good rest. The right bed should fit into the interior as successfully as possible, combine convenience and reliability - metal models meet all the above requirements.

Advantages and disadvantages of iron models

Like any other material, metal has its own set of advantages and disadvantages. Speaking about the advantages of a metal frame, first of all it is worth mentioning that metal beds are as durable and reliable as possible in comparison with models made from other materials. This bed prevents loosening and is as wear-resistant as possible. In addition to wear resistance, we can say that metal has the ability to withstand any load, which is why double beds with a forged frame are so popular.

Metal is a non-flammable material, which means it is as safe as possible for use in an apartment; in addition, this material is absolutely hypoallergenic and environmentally friendly. Additional positive quality These models have a huge range of design options, you can choose the appropriate design for almost any interior solution.

The main disadvantage iron options is that metal is enough cold material and may cause discomfort when in contact with the skin. However, modern manufacturers use special treatment bed parts, which eliminates the cooling of the material, so today metal models do not have significant disadvantages.

Kinds

Today there are many types of metal beds.

All of them can be divided into several classifications:

For example, all models can be divided by class into economy and luxury models. They will differ in the quality of the material, the method of applying the dye and, of course, the price.
According to their shape, all models can be divided into standard– these are ordinary rectangular models of various sizes, as well as non-standard ones. This type includes models such as round, square or other unusual design solutions.
The most common options by number of seats: single, double, king size or triple.
In addition, the beds can be divided into groups according to the owner. This can be a model for adults, as well as for children. Such beds will differ primarily in size and shape. Children's models, as a rule, are produced with three backs or are also equipped with a fourth for very young children.

There are models that will become real helpers in small spaces., they are able to provide a comfortable sleep, but do not take up much space, as they can be transformed into other interior items. So, folding bed can rise towards the wall and turn into a closet. A pouf bed can easily be transformed from a full bed into a small pouf on which you can sit, and a sofa bed is an ideal folding model that can transform from a seating area into a double full bed. In addition, many models have a roll-out system for storing linen and other things.
Beds may differ in the material of the base of the niche with a mattress. For example, an orthopedic model most often has a base made of wooden slats - lamellas; there are also models with laminated chipboard, as well as with a metal armored mesh, however, they are becoming increasingly rare. The reinforced model has a metal frame at the base, to which the base for the mattress is attached.
The design of the bed model can be either consisting of one type of material or combined, for example, with a metal frame and a wooden headboard. In addition, at wooden backrest there may be a carved structure, which will allow the bed to be used in various interiors.

Styles

Thanks to the abundance various options a metal bed can fit into almost any style of space. You just have to choose the right backrest design and the right accessories.

You can fit a metal bed into a retro style, Provence or any other:

Modern styles of minimalism, hi-tech, loft are accepted as much as possible simple models with straight bars on the back, which form a kind of lattice. Such a bed can be made in white, black or steel colors, and in addition it is acceptable to use bright accents in the form of pillows or bedspreads.
White metal beds with patterned headboards will help add romance to the room; a light canopy in light colors will be an excellent addition here.
Exquisite ornamentation, rich decor, and the colors of noble metals will be an excellent option for a bedroom in the Art Nouveau or Baroque style.

Manufacturing options

Of course, there are many manufacturing options metal models beds, they can be created different ways from different materials in production, as well as at home with your own hands. There are two main ways to create a metal bed - forging and welding, therefore, having the skill of this work, you can create the necessary thing with your own hands.

Making a bed with your own hands is a rather labor-intensive process, however, the result is worth all the effort. So, if you decided to create a model with your own hands, then you need to be patient, the right tools and materials and start creating. The first step to the bed of your dreams is to determine the size of the future sleeping place; this will depend on the number of people who will simultaneously use the bed for its intended purpose. In this case, it is easy to create a stock of non-standard sizes, which will cost several times less than a custom-made version in an unusual design.

Having decided on the sizes and approximate appearance products, it is necessary to draw up a design plan on paper to make it more convenient to bring the idea to life, and also to purchase everything necessary materials. You need to start creating from the backs of the product, so it can be a purchased forged or welded structure various forms, design, as well as a self-created metal back, however, this will require special equipment and skill in working with an anvil or welding.

When will the backs be ready? the right size and shape, you can start creating the frame. A metal frame is created, to which a wooden or metal base for the mattress is then attached. The backs are welded to the frame and the frame thus takes on a finished look. All seams and welding areas must be sanded for a neater appearance. Next, if necessary, the structure is painted.

Dimensions

The dimensions of standard beds include three main dimensions - width, length and height of the bed. So, in terms of width, there are 4 main groups of size ranges. The width depends on the number of people using the bed and on their build:

Single models. These beds are ideal option For small apartment, studio apartments, for one adult or child. The width of single models ranges from 70 to 90 cm.
One-and-a-half-sleeper. The most comfortable models for one adult. The width of such models usually ranges from 100 to 140 cm.
Wider beds from 150 to 200 cm, are double models.
Models with increased bed width. Here the width exceeds 200 cm and such options have a name - king size beds.

As for the length of a standard bed, it can range from 160 cm for teenage models to 200-220 cm for adults. Correct selection required length will be facilitated by a special formula in which the length of the bed will consist of the height of the sleeper and 20-30 cm of reserve. Thus, among the most common bed options, the following bed sizes are found: 800x1900 mm, 90x190, 90x200, 120x190, 120x200, 140x190, 140x200, 160x200 cm. There are also models with non-round intermediate sizes, they fit well into non-standard designs: 1450x650, 1650x1950, 1450x1950 mm and others. A two-story structure can withstand the same dimensions, regardless of the floor, the beds have standard size, like conventional stationary options.

The last dimension of a sleeping area is its height. There are three main options for measuring height:

Low. Here the height will range from 20 to 40 cm; it should be borne in mind that these models are not suitable for an elderly person and people with joint problems, as it will be too low and not convenient option, which, in the presence of certain problems, can provoke their development. However, a healthy person should not be afraid of such a height and can safely choose a low bed for the interior in Japanese style or minimalism.
Average height, most comfortable and suitable for any person. This height ranges from 40 to 60 cm. If you stand at the edge of the bed, the correct average height should reach just to the middle of the kneecap.
High. It has a height of 70 to 90 cm. Not the most convenient option, however, it looks very advantageous, which allows you to neglect a certain degree of convenience for the sake of a beautiful interior.

Colors

Modern technologies Today they allow you to apply high-quality durable coating of almost any color on Forged Products, be it chairs, beds, tables or any other furniture. Therefore, finding a metal bed in blue or red colors will not be difficult. However, with all the abundance color palette, provided today by manufacturers, the most popular are forged options without a color coating: natural dark or steel color is the most popular in the furniture market.

photos

Options with white backs or decorative elements made in this color. White bed can add lightness, airiness and light to the interior. In addition, this color is most suitable for design solutions in Provence, country, modern style. Minimalism and hi-tech also favor white color in the room's setting.

The black metal bed model is quite common. Forged elements in this color scheme they look most advantageous, in addition, this color is universal, it is easy to choose companion colors and textile accessories.

How much does it weigh?

The weight of metal models directly depends on the size, the number of sleeping places on the bed, and the chosen method of creating the model. Depending on the design and additional decor, the weight of the final product may also change.

A fairly heavy design can be both an advantage and a disadvantage of a sleeping place. High weight ensures a strong structure as well as stability. The bed will not move on the floor as if it were made of chipboard. And the same weight can also be a disadvantage; the bed will be difficult to move in space, and if it needs to be transported to another apartment, you will need special companies involved in freight transportation. At the same time, metal versions can withstand loads of up to 300 kilograms.

The simplest forged models without special decoration can weigh from 20 to 50 kg. Double models with voluminous decor, additional elements, and special design solutions can reach a weight of 100 kilograms or more.

Life time

The service life of any piece of furniture is determined by the frequency of use, the method of cleaning the product, its care, the humidity in the room, as well as the original quality of the product. Metal models have the most long term services from all known materials from which beds are produced. In these models there is simply nothing to fail, especially if the base under the mattress is also made of metal tubes. Metal options with a base of lamellas it will last slightly less, however, with correct use and a good dense mattress, and they will delight you with a high service life: from 15 years without restoration and various types of additions.

A high-quality forged model with a durable color coating can last 20 or 30 years without changing its appearance. The mattress, of course, goes out of use a little earlier, however, high-quality models that are correctly selected in terms of size and wear resistance can also last about 10-15 years without replacement.

Additional items

Such elements can provide furniture with additional functionality, as well as new design possibilities. The most common additional element that can expand functionality is a niche for linen and storage of other things. Such niches can be stationary and located under the base of the frame; in this case, the mattress will be raised manually, using gas lifts or springs.

In addition to stationary niches, there may also be additional roll-out drawers, which are created according to the size of the bed and built under the frame. However, such options are not as relevant and convenient to use in comparison with stationary ones. Since dust can collect in such boxes, their capacity is noticeably smaller. For children's beds, an additional functional element can be additional headboards on the sides of the bed, which will restrict the child in his sleep and protect him from falling; such elements can also be permanently attached and be part of general design, or can exist separately and be attached if necessary.

As additional element, performing an aesthetic function, it can be noted special fastenings for the canopy and the actual fabric part of this structure. Light fluttering materials, from which such curtains are most often created, add lightness, airiness, and romance to the interior. That is why this particular element is most often used in the design of a girl’s children’s room in the princess style, because it is from beautiful fairy tales about princesses that most people know about such a device as a canopy.

Manufacturers

Today, most sleep furniture manufacturers have metal models of various colors, sizes and designs in their collections.

Concerning Russian manufacturers, among companies focused on broad demand, there are very few who are concentrated in the production of metal models. In collections there are, as a rule, 1-2 combined options, which does not allow us to talk about production giants as manufacturers of metal sleeping places. But individual manufactories specifically engaged in forging and welding of models are quite widely developed, have an extensive customer base,, as a rule, deal with individual orders and are able to guarantee the excellent quality of their goods.

Among such manufactories is the Woodman company, which produces elite unique models. The cost of models starts from 120 thousand, which is not cheap, however, at the end the consumer receives a completely unique product of the required size, color and texture. The factory takes Italian bed models as a basis, adds its own vision to them and conveys it to the buyer through its product. The manufacturer's warranty is 10 years, which allows us to judge the decent quality of the product.

But in the economy class, the MilSon company is quite popular. The average price for a high-quality metal bed here is about 12-13 thousand rubles. For this price, of course, you won’t be able to buy an exclusive model, but the company can guarantee a comfortable and durable place to sleep.

Many European manufacturers are ready to provide their products to consumers, for example, the Feretti&Feretti manufactory from Italy or the German company Geha.