How and with what to wash the glass on the windows from the cement solution? Whiter than white, or how to clean plastic windows after construction

During repairs in a new building or during the installation of windows, it is very difficult to keep frames and glass clean. And washing them from construction dirt is also more difficult than from ordinary household dirt. But for each type of pollution there are cleaning products. Do you want to know which ones? I'll tell you about this.

Film and tape marks

All manufacturers recommend removing the protective film pasted on plastic windows after installation. But this is not always possible to do on time. And when repairing frames, they are often pasted over with adhesive tape or mounting tape to protect them from dirt.

Over time, these films firmly “stick” to the surface, and it becomes problematic to clean the plastic from the glue.

The first thing you can try to do this is hot water and the hard side of a dish sponge. Before washing the plastic on the windows with any other drug, try this option.

In case of failure, they will come to your aid:

Image	Tool name
	Undiluted medical alcohol, as well as vodka or cologne.
	Nail polish remover. Better one that does not contain acetone.
	Tea tree oil.

Scotch stains, as well as stains from stickers on glass, are soaked with any of these liquids, after which they are scraped off with a plastic spatula.

Cement

When plastering and leveling walls, protect plastic frames and double-glazed windows from spraying the solution is quite difficult. How to clean them up cured cement. Try one of the following methods.

Method 1 - special tools

If you need to get the result quickly, and the price of the product does not really matter, buy special preparations designed for cleaning different surfaces from cement. For example:

ATLAS SZOP;
Cement N Concrete Remover;
Baugerätereiniger 81.

All of them are available in the form of a spray, which is sprayed onto a contaminated surface. After the specified time, the dissolved or softened solution is washed off with a rag.

The main thing is that the product does not contain caustic acids in its composition. which can damage the plastic. Therefore, the instructions for use are required to read before buying.

Method 2 - Comet

Another effective tool for cleaning windows from mortars is Comet thick gel for plumbing.

You can clean plastic windows with it like this:

Apply gel to stain. If it is a vertical surface, then you will have to apply several times.
Wait until the cement becomes loose and soft.
Remove it with a damp cloth.
Repeat if necessary.

But before cleaning windows after repair from dirt and mortar, vacuum or brush them to remove badly stuck pieces and avoid unnecessary work.

Method 3 - acetic acid

If you don’t have the means described above and you have nothing to clean plastic windows with, use vinegar essence, diluting it a little with water.

How to clean windows with vinegar:

Consider Protective Equipment- put on rubber gloves and a gauze bandage.
Dilute the acid with some water.
Soak a rag in the solution and saturate all stains liberally with it..
After a few minutes, try wiping them off. with your own hands.
If the result is unimportant, sprinkle baking soda on a rag with a solution so that it gets wet, and rub the stained places.

In the same way, you can wash liquid glass. But you need to try to clean the frames and glass from it immediately, using simply hot water. Otherwise, it will react with the surface, and it will become very difficult to get rid of the stains.

Mounting foam

To seal the window, foam is blown into the space between the frame and the opening. Increasing in volume, it often stains plastic.

Do not try to wash it with water, even fresh - it is useless. And all kinds of solvents or means with which they are washed mounting gun can corrode plastic. How to be?

fresh footprints from polyurethane foam the easiest way to remove Cosmofen. It is this cleaner that installers use plastic windows. It comes in three types (see photo). The higher the number, the weaker the remedy.

Dried foam won't take any detergent, and Cosmofen may not help. In this case, Dimexide will solve the problem. This medical preparation is good solvent, so you need to work with it with gloves. The undiluted liquid is applied to the stains with a sponge or cotton swab, and after a few minutes it is washed off with a damp cloth along with the remaining foam.

Dye

You can not break your head about how to wash the glass - any solvent designed for the type of paint that needs to be removed will do. With plastic it is more difficult, the solvent can damage it:

If the paint is on water based , you can try to clean it with hot water, soaking the splashes and scraping them off with a scraper.
From other types of paint and get rid of the primer with turpentine.

But try not to use knives, blades and metal spatulas - they leave scratches on the surface. The scraper material should be harder than the dirt, but softer than the plastic itself.

Polish is always found in the set of care products for plastic windows.

Conclusion

Now you know how to clean windows after repair from various building substances without damaging them. After such cleaning, double-glazed windows are washed in the usual way. You can watch the video in this article on how to properly care for plastic windows.
I could forget about some methods or not know. If you know them, tell us in the comments!

Whatever the repair, major or cosmetic, and no matter how carefully it is carried out, it will still not be possible to avoid building dust. drill work, construction mixer, grinder is always accompanied by a dusty cloud.

Preparatory work

Do not start repairs without pre-training premises, then during cleaning the question will not arise unexpectedly, how to remove building dust.

Mandatory need:

take down the curtains
take out indoor flowers,
small items pack in boxes and make up and away from working area.

The fewer things left in the room, the easier it will be to restore order after the repair.

home appliances small size it is better to take it out, and the overall must be packed.

Static electricity is good at attracting dust, which can easily get inside unprotected equipment.

Dust barrier

Doorways can be covered thick cloth or construction film. You can use old curtains or sheets for this, as long as they fit in size, leaving no gaps on the sides and bottom.

It is better to wet the fabric cloth so that the damp cloth collects and absorbs the settling building dust. As it dries and becomes dirty, the fabric will need to be rinsed out and hung again on the opening, so it will not be possible to nail it tightly.

A plastic film can be fixed around the perimeter of the doorway by sewing a zipper along its length. It is a little easier to make such a temporary screen from two pieces of construction film, securing them with an overlap. It will be enough 20-25 cm of extra centimeters, which will overlap the junction.

Having built such a simple protective structure, it will be possible to carefully exit the working area without dispersing the settled dust around the rooms. Then you don’t have to think about how to remove building dust in other rooms.

Windows can also be curtained with a wide transparent film. If this is not done, smooth surface glass will attract to itself everything that “dances” in the air and will be covered with a dense layer of dust. It will not be possible to sweep it with a broom or collect it with a vacuum cleaner. Windows will have to be washed several times with plenty of water to achieve the same cleanliness and transparency.

The role of an obstacle can be played by closed door, but then it will be necessary to lay the gap at the bottom with a wet cloth roller. This should be done even in those rooms where repairs are not being done.

You can also protect the floor from dust if it is not supposed to be repaired. The better and neater it is laid, the less dust will remain on it. But it must be taken into account that with high humidity during the repair under the film parquet and laminate may suffer.

Interior items that remain in the living room for the duration of the work must be securely covered, wrapped, swaddled. This applies not only to upholstered furniture, but also cabinet furniture. Here, too, construction film is useful. The wider it is, the less unprotected places that dust can get into. A wide film web will allow you to cover a large surface without joints. For fidelity, it can be put in two layers, and sharp corners lay with a soft cloth to prevent tearing.

As a result, it turns out that when preparing the premises for repair work, four main things must be done:

collect and remove small items and equipment from the working area;
cover the floor;
to cover what cannot be moved;
curtain doorways.

How to prevent or minimize building dust

Dust is hazardous to health, especially construction dust. The chemicals it contains can cause allergic cough and shortness of breath. It mercilessly clogs the lungs, settles on the bronchial mucosa, irritates the eyes, if you do not use elementary means of protection during work. Least, need a respirator. If it is not there, then the lower part of the face can be covered with a wet handkerchief for the duration of drilling or crushing.

In summer in calm weather window frames better open wide. So part of the construction dust will float out. It is necessary to close the windows only for the time of cleaning, so that the air flow does not raise the already settled dust from the floor.

When working with a drill, it is quite possible to make sure that the dust does not scatter in all directions, but moves in a stream in the right direction. To do this, just put a scoop at the drilling site or turn on the vacuum cleaner nearby, aiming the hose pipe precisely. There are also special dust collector nozzles, which are a small plastic container. It is easily put on the nozzle of the drill, and the waste during drilling falls immediately into the container.

If this is not contrary to safety regulations, you can sprinkle the surface of the wall with a little water from a spray bottle so that the plaster is less dusty. It would be nice after drilling to immediately humidify the air in the entire room and, thus, nail the flying dust to the floor.

When removing old wallpaper, a layer of paint or whitewash, the surface must be moistened. Here you can not feel sorry for the water. The softened surface is easier to remove and less dusty.

To help yourself during the repair, you need to take care of three simple things:

open windows;
use dust collectors;
periodically humidify the air.

When to start cleaning from construction dust

Cleaning should be done in stages, putting in order each workplace. This is important, although a little tedious. But following this rule will save time and effort during the subsequent final cleaning.

After working with a drill, there will be especially a lot of dust. Therefore, before proceeding to the next stage, one should not be too lazy to collect it. Here you need to think about how to remove construction dust so that it does not stretch like a train to another corner and disperse throughout the room.

If the dust hangs and does not settle, you can sprinkle water not only on the air, but also on the floor surface. Slightly moisturized building dust will be easier to assemble.

When the work planned for the day is over and it's time to rest, it is necessary to put the polluted "planet" in order, as everyone's favorite Antoine Saint-Exupery used to say. Despite fatigue and unwillingness to engage in such seemingly useless work, this must be done so that debris and dust do not accumulate in large volumes after repairs.

When, finally, the repair is completed, the walls, floors and ceilings are repaired, working room turns into a territory that needs to be put in order. If pieces of plaster tiles, scraps of wallpaper can be collected in a bag with your hands, and small debris can be swept with a broom, then it is much more difficult to deal with construction dust.

To clean the apartment after the repair was easier, you need to do the cleaning:

step by step;
daily.

How to Destroy Remaining Dust

Even when the tools are collected and the garbage bags are taken out, the dust after the repair remains throughout the room. Now it is not advisable to open the windows, so as not to frighten away those remnants of it that lurk in the corners and hide in the cracks. Here the question arises, how to remove dust after repair. It cannot be swept away with a dry broom. So you can only create a gray cloud, which gradually settles back. Dry rags will not help here either, you will have to work as a vacuum cleaner.

Household appliances with such a load can not cope. The cloth bag will quickly become clogged, and the vacuum cleaner will simply choke on fine dust. Here you need a unit equipped with paper bags or a plastic container that will collect dust after repair and prevent it from escaping back. It is better to use special construction vacuum cleaner. It pumps air more powerfully, so it captures fine dust particles more easily.

The use of special equipment- This perfect option in order to clean the apartment after renovation. But there is no particular need to buy a construction vacuum cleaner. It can be rented during renovations. You will have to vacuum not only the floor and walls, but also the ceiling.

It is necessary to walk with a vacuum cleaner in all corners, nooks and crannies, crevices, baseboards, where a portion of dust could linger. The nozzle should be flat with a cut corner. Vacuuming linoleum is pointless, it is better to walk on it with a moistened broom or a brush with a long handle. This should be done with careful, unhurried movements so as not to disperse the dust.

After working with a vacuum cleaner, you can start wet cleaning. To do this, you need to prepare a few rags, because they will quickly get dirty and become unusable. You can use a microfiber cloth. She copes with the task more easily and washes herself well. With a damp cloth, you will have to wipe not only horizontal, but also all vertical surfaces. Water should be changed more often, rags should be rinsed in in large numbers water.

Friends often share useful tips how to clean after repair. From their recommendations, it becomes clear that it will not be possible to cope with dust at a time, it will still settle, no one knows where it came from. There will be stains that can only be overcome with clean, damp rags dipped in vinegar.

Before washing the floor, it must be swept with a slightly dampened broom. The main thing is not to overdo it, otherwise it will turn out just a dirty puddle. Slightly moistened dust crumple, and it will be easy to collect with a brush or mop. It is not necessary to rub it strongly on the floor, this will only cause stains. The floor will have to be washed several times, constantly filling the bucket with clean water.

Curtains with doorways removed last. They can also be pre-sprinkled with water and gently rolled up.

The main task of cleaning is completed - the dust after the repair is removed. The garbage remaining after the repair in tight bags has safely migrated to the garbage cans, the floor has been washed, but the dust will have to be fought for more than one day.

Seasonal cleaning of windows, including plastic ones, is a habitual action that can be done at least once every 6 months. However, after construction works in the house double-glazed windows require urgent putting themselves in order. How to wash plastic windows after repair, what means to use, and what is better to refuse?

Before looking various options In order to clean windows after repair, you need to consider some useful tips. They are able to facilitate the process of cleaning double-glazed windows, saving time and effort.

Some rules and tips for bringing windows to their original appearance

Before starting any repair work it is important to properly protect both glass, and frames, and window fittings from possible ingress of paint, plaster, primer and other materials. And also protect plastic windows from mechanical damage. To do this, at least cover them with a protective film.
After completing all the manipulations in the room, in order not to ask yourself strenuously the question of how to wash windows after repair, on which there are traces of glue or adhesive tape, it is important to remove all protective coatings within a couple of days. If this process drags on for several months, there is a risk that the film or construction tape will stick too much, it will be problematic to peel them off, and a sticky base will remain on the surface of the frames and glasses.
If during the period of repair work the protective measures and safety measures in relation to double-glazed windows were violated, traces of dirt appeared on the surface of the profiles, sharp metal objects should not be used to scrape off the dirt. This will damage the plastic. You can only use special devices sold in hardware and building stores, often having either a plastic or rubber base.
As in the case of other windows, solutions based on soap shavings and laundry soap should not be applied to double-glazed windows. Such solutions are very alkaline, moreover, they leave noticeable white stains on a transparent surface, which are extremely difficult to get rid of.
If, when deciding how to clean plastic windows after repair, the choice is given to professional chemicals, it is important to follow all safety measures, protecting skin covering, mucous membranes and without inhaling toxic fumes. After cleaning the windows, the room should be well ventilated. The preparation of solutions and the washing process itself must take place strictly according to the instructions indicated on the chemical agent.
When choosing devices for cleaning any window surfaces, preference should be given to soft tissues containing polyester, as well as white cotton materials, flannel. Rags should not crumble during washing. Also suitable paper towels, napkins, including those made of microfiber, an ordinary newspaper that helps to polish the transparent surface to a shine. Use of toilet paper or other thin paper is not recommended.
It is important to remember that windows should first be cleaned from the outside, only then from the inside. First, glass is cleaned, then frames, fittings, window sills. In this case, you should first vacuum the entire profile well in order to stretch small particles dust, soil, plaster.
When using any potent agent based on chemistry or alcohol, you need to make sure that it does not get on the rubberized sections of double-glazed windows, and also does not remain for a long time on the surface of frames and plastic, so that cracks do not occur.
When deciding how to wash windows after repair, you need to remember that acetone products are unacceptable to use in relation to plastic, especially apply them in large quantities or leave them on long term. Not suitable for plastic windows and gels with abrasive particles, dry powders that can scratch the glossy surface. The use of hot water and heated solutions of any type is also not recommended.
Window cleaning should be done at a time when direct Sun rays do not enter the room. If possible, this manipulation should be carried out in cloudy weather, in the evening or in autumn or in spring.

In addition to the tips above, there are specific recommendations for specific ways to remove some building dirt:

plaster, primer and other similar options should first be moistened with warm, almost hot water; you will have to repeat the procedure several times, simultaneously cleaning the surface of the glass with a rag or napkin;
the mounting foam must first be scraped off with a scraper, then try to soak it either with warm water, or using a special agent (solvent), rub it with a hard (but non-metallic) sponge;
paint stains easily move away if they are heated even with an ordinary but powerful hair dryer; under the influence of hot air, the paint “melts” and it is easy to wipe it off the surface of frames or glass;
if the adhesive tape does not come off, it should be moistened with water using a soft sponge, then gently trying; it is also permissible to soften the adhesive with steam using an iron or a steam generator;
various means, including special solvents, help against traces of the adhesive base of adhesive tape or film, laundry soap.

Brief instructions for washing plastic windows and options for special cleaning products

Wipe the surface of the profiles with a soft, non-shrinking cloth, collecting the first dirt. Then vacuum, including between the frames.
Carefully scrape off existing serious contamination using a scraper or special knives suitable for plastic. Remove any dirt with a dry brush or cloth.
Apply your chosen cleanser or washing solution. It is better to use a spray bottle for this, spraying the substance obliquely across the glass.
Wipe off the cleaning mixture with paper towels or selected rags. Or use mops and double-ended scrapers to greater efficiency cleaning. Do not forget about the spin. Important: washing is carried out from top to bottom and gradually, with smooth movements.
Wipe the window dry with paper, newspapers. If necessary, cover it with special protective mixtures that do not need to be washed off, it is only important to apply and distribute evenly over the glass.
Then clean the frames, fittings and window sill.

One of the options for a visual process of washing a plastic window can be seen in the video:

How to wash windows after repair? Several proven chemicals

« Mister Muscle”, helps fight dirt, while not leaving ugly streaks when used correctly.
Solvent « 646 ”, which removes paint, primer and other construction contamination without damaging the surface of the double-glazed windows.
« Phenozol”, a specially designed tool for plastic profiles, with which you can also get rid of mounting foam.
« Bref, is an affordable and effective tool.
« Cosmofen 20", which does not have strong chemical components in its composition, therefore it is not suitable as a solvent, but it fights against various contaminants. " Cosmofen 10" And " Cosmofen 5", acting as solvents.
« Penosil", fights against various pollution, at the same time is issued in a convenient bottle, in the form of a spray.
« Mister proper”, similar to the first remedy in the list.
Windshield wipers from the manufacturer « San Klin».

With caution, it is worth using tools such as Comet, choosing only gel-based options. When choosing an additional agent for cleaning double-glazed windows, it is worth considering that it should also not contain wax particles and chlorine.

Folk ways to clean plastic windows

Sometimes there is no way to use strong and aggressive chemicals. And how to wash plastic windows after repair work in the room in this case? You can turn to folk methods.

Fight pollution in plastic profiles The following tools will help in the apartment:

Nail polish remover which should not contain acetone. With it, you can wipe off various stains, including from glue or paint.
Vinegar bred in warm water in a ratio of 5: 2, will bring plastic windows into perfect shape.
Foaming gel cleanser, suitable for washing dishes, will get rid of surface contaminants without damaging the plastic, and without leaving streaks. It is enough to dissolve a couple of spoons of the gel in a bucket of warm water, lather well and wash the windows with the mixture.
Ammonia, diluted in warm water, eliminates the effects of repairs seen on plastic profiles. It will take a couple of teaspoons of the substance to add to a liter of slightly warm water.
Strong acetic acid , dissolved in water, acts like ordinary vinegar and is also acceptable for cleaning double-glazed windows. It will help to get rid of yellowed areas on the surface of the profiles, which could have been caused by smoke or the sun. We also recommend reading the article,.
Can save in an emergency kerosene, which should be applied exclusively to the place of contamination. Helps with paint stains. Additionally, you can apply petrol.
Another folk trick: Moisten a cut of natural, unpainted leather in medical alcohol. Then wipe the windows with it, removing the dirt.

Sometimes you can find advice that it is permissible to wipe the surface of double-glazed windows with solutions of soda or table salt. However, this method can lead to imperceptible trauma to the plastic and soon disable the windows.

Two Extra Tips for Cleaning and Protecting Plastic Windows

Tip one: by dissolving a few tablespoons of dry potato starch in a gentle detergent, you can achieve shine plastic surface. In this case, you do not have to rub the profiles with newsprint after a long time.

Tip two: so that the double-glazed windows do not get dirty too quickly, after cleaning they should be wiped with a solution of glycerin and ammonia. For a liter of warm water, you will need two large tablespoons of glycerin and a couple of tablespoons of ammonia. It is not necessary to wash off this mixture, it will protect windows from dust, fine dirt, and prevent surfaces from fogging.

Washing windows is a chore. However, following all the valuable recommendations, relying on advice and choosing the most relevant remedy for a particular problem, you can put plastic windows in order after repair in 20-40 minutes without damaging their surfaces and keeping them clean for a long time.

The repair is completed, the only thing left to do is clean up from construction debris and dust. As a rule, metal-plastic windows are installed at the very beginning of such work. In the construction process window structures polluted no less than the rest of the room. How to quickly wash plastic windows after repair and return them to their original appearance? This process can be divided into two stages: cleaning the profile and washing the double-glazed window.

It does not matter whether you plan to wash new PVC structures or those that have been in operation for a long time - the methods are universal.

Cleaning the profile from dust

If the windows are new and the protective film with the manufacturer's logos has not been removed from them, in most cases it is enough to remove the sticker and wipe the plastic with a damp cloth. If there was no sticker, then, as a rule, the window is covered with a thick layer of various dirt. What to do in this case and how to wash the plastic window from building dust? There are several ways:

Take a simple liquid detergent, dilute it with water and wipe down the plastic. Usually this is quite enough to remove settled dust and residues of building mixtures.
Apply liquid soap on the profile and wait ten minutes. During this time, the dried dirt will get wet, and it can be easily removed with a damp cloth.

If after these procedures there are still traces of concrete or plaster, they can be removed with a clerical knife or blade.

How to remove traces of mounting foam

It may turn out that it was not easy to get on the profile, but do not worry, this situation can be corrected:

With a new spatula, carefully scrape off the cured foam. Often it is quite easy to give in, without undue effort. If the foam has eaten into the plastic, you will first have to clean it as much as possible mechanically.
Take a cleaner (sold in any hardware store) or an acetone-based solvent. Soak a piece of felt with any of these liquids and apply to the remaining foam.
After the foam has soaked, vigorously wipe the profile with a piece of felt until the sealant residue is completely removed.

To protect the skin of your hands, carry out this procedure with rubber gloves.

What to do if glue residue has eaten in

ingrained adhesive from protective film- the most common problem on plastic windows during cleaning after repair. But it can be removed using special tools.

Buy from any seller plastic windows special tool "Cosmofen". It is of several types and is indicated by numbers. "Five" - the most gentle solution, "twenty" - the most concentrated composition. Describe your problem to the seller and he will tell you which brand to buy.

If it is not possible to purchase this tool, use a building hair dryer: warm up the remaining glue and scrape it off with a new plastic spatula. For final cleaning, wipe the profile with an acetone-based solvent and wash it off with detergent and water.

If nothing helped

In the most neglected cases, the method of electromechanical polishing is used. To do this, you will need a drill or a small Sander, special felt circles with GOI paste and liquid cleaners based on acetone. The polishing process is as follows:

all succumbing dirt is removed with a cleanser and a spatula;
a power tool with a special wheel polishes the profile, thereby removing a thin surface layer plastic, along with dirt that has ingrained into its structure.

You can also remove small scratches this way. If the scratches are very deep, cover them with liquid PVC (available from a window company) or white acrylic.

Cleaning and washing of double-glazed windows

Even if the builders worked carefully, a thick layer of construction dust would inevitably appear on the glass. Many try to cope with the problem with water and a rag. This method is simple but inefficient. After the end of the wash, there is still a white coating.

To use water alone, it must be washed at least ten times, and there is no guarantee that the dust will be completely removed.

How to wash plastic windows after construction in this case? Try this method:

Dissolve in one liter tap water a glass of vinegar or a tablespoon of ammonia. If neither the first nor the second was at hand, then you can use bleach in the amount of fifty grams per liter;
Soak a sponge in the solution and wash the double-glazed window. After washing, polish the glass with a newspaper.

If the window is made with deaf parts and it is not possible to reach some places, use a special brush with telescopic handle. Dip the foam sponge in the cleaning solution, wipe the glass with it, and then turn the brush to the other side and rubber spatula remove water with residual contaminants.

When working with solvents and special products, use rubber gloves and take care of your eyes.
Avoid getting any product on the rubber seal. Aggressive components will ruin the rubber and break the tightness of the window. In certain cases, the problem will be irreparable, since some types of profiles are produced with rubber already soldered into them and there is no way to replace it.
Non-washable traces of building putties and adhesive mixtures can be removed special means for cleaning cement-lime pollution (sold at any hardware store).
When working with simple solvents that are not intended for PVC, be extremely careful. A high concentration of acids in their composition can corrode the profile.

It is not difficult to wash plastic windows from construction debris if it is done correctly. A little work - and your windows will shine white again!

Repair in an apartment is worse than a nuclear war. Such an expression takes place in the conversations of people who started a major renovation of the apartment, deciding to change the wallpaper, update the ceilings, fix the plumbing and other things. Indeed, even at the final stage of the repair, when everything is pasted over / painted / whitewashed, there are still a lot of little things that will have to be spent both time and effort. This type of work also includes house cleaning. How to wash the floors after repair from white plaque? This question is asked by those who decide to resort to one of the old, but reliable ways to finish the ceiling - whitewashing.

Cleaning up after a renovation is no easy task. Fine and nasty dust resulting from construction work will have to be removed from everywhere in large quantities. She gets stuck in upholstered furniture, settles on cabinets, sometimes clogs in the most inaccessible places.

Important! Fine building dust adversely affects human health. It settles in the respiratory organs and often becomes the cause of the development of respiratory diseases. Cough, pain in the lungs are frequent companions of those who are engaged in repairs and do not follow safety precautions, i.e. do not use personal protective equipment.

That is why it is important to remove all debris and dust as much as possible after the repair is completed. And also, before starting this large-scale operation, it is recommended to make some preparations that will protect the interior from dust and whitewash.

In the room where the work will be done, it is advisable not to leave anything - all the furniture is taken out, it is best to pack things in boxes or bags so that dust does not penetrate them even through small cracks. It is recommended to wrap the furniture itself plastic wrap, because, even standing in another room, it will be "attacked" by the smallest particles of building mixtures. What cannot be taken out is recommended to be wrapped with cling film, as it will not allow dust to get to the interior.

If it is planned to carry out such a procedure as whitewashing the ceiling, and there is already a new floor covering on the floor or it is not being replaced at all, as it will be used further, then the floors must be protected as much as possible. To do this, the base is covered with a dense film, which is then fixed along the baseboards with masking tape.

Important! If you neglect the fixation, then the film will crumple and there will be no sense from it. It is also important to glue all the joints of individual canvases with tape.

Some use ordinary old newspapers instead of film, but this method is not the most reliable. When wet, paper loses its strength and is easily torn. To protect the base as much as possible, it is recommended to lay newspapers in at least two layers. It is not recommended to use a cloth to cover the surface, as it will still pass all the fine dust through itself.

It is worth remembering that pollution, and especially whitewashing, is easier to prevent than to wash off all the consequences of your negligence later. Sometimes some coatings under the influence of white dust are hopelessly damaged.

Features of whitewash as a finishing material

Whitewashing is one of the cheapest and available options ceiling finishes, moreover - time-tested. Although this technology has now been partially superseded by more in modern ways design, yet it is still in demand, and all - thanks to its special advantages:

availability and low cost of the method;
the possibility of doing the work with your own hands without the involvement of craftsmen;
environmental friendliness and purity of the materials used;
strength, reliability, stability of the applied decorative layer;
a classic version of the design of an ordinary white ceiling.

Whitewashing can be done with either chalk or lime - these materials are available and always on sale, but are inexpensive.

Advice! If the ceiling has already been whitewashed, it is recommended to use the same material that was used previously to update the layer. That is, if the upper part of the room was covered with lime, then it is important to use the lime composition.

Whitewashing is exactly the material that most often leaves white coating on the surface of the floor after repair. It is sometimes very difficult to wash off, especially if it got to the wrong place, but, for example, on the floor. And during the repair, it is unlikely that it will be possible to completely avoid contamination of the base, even if you cover the entire room with a film. The fact is that protective covering can be easily damaged and all the dirt will fall onto the floor through the hole formed. It is unlikely that someone will pay attention to a small hole in polyethylene and immediately close it up in the process of work. That is why, when deciding to whitewash the ceiling, it is worth knowing how the process of washing the floors from it takes place.

In general, washing the floor after the repair work is completed is not much different from regular cleaning. But often you have to use special solutions or components to cope with white spots on the base. Before we talk about floor cleaners, here are a few helpful tips for cleaning your subfloor:

do not use soda to wash linoleum- its impact will have a bad effect on the appearance of the coating;
paint and other similar liquids should be removed from the coating immediately- then it will be more difficult to wash them. The same goes for whitewash stains;
laminate and other similar coatings must not be rubbed with abrasive materials– the top protective layer can be damaged;

Potassium permanganate cannot be used on varnished surfaces.- stains will appear on the floor;
it is best to wash all stains after the initial treatment of the floor– sweeping and wet cleaning;
it is better to wash the floors from the wall farthest from the door, moving towards the exit, so as not to stomp on the freshly washed surface;
water during mopping after repair is recommended to be changed as often as possible- this way it will be possible to quickly cope with corrosive pollution and avoid stains, which especially often appear during the washing of whitewash.

How to wash the floor after whitewashing?

To remove white plaque from the floor, you will have to be patient and purchase a few tools that make the job easier. You will also need ordinary water, a couple of rags, a mop.

Methods for removing white deposits and streaks from the floor differ depending on the type floor covering. Let's consider each option in more detail.

How to wash parquet after repair?

- the coating, although reliable, is very delicate. It does not like to come into contact with water - due to its effect, the coating loses its beautiful and noble appearance may swell. That is why it is not recommended to moisten it abundantly. Consider the easiest way to wash whitewash and white deposits from parquet.

Table. Means for the fight against whitewashing on the parquet.

Means	a brief description of
	Having dissolved a little of this agent in water, the parquet is carefully processed with a cloth soaked in the solution. The composition easily copes with water-soluble types of stains - putty, construction dirt, including whitewash.
	Before using these products, it is recommended to wipe the parquet with a clean, damp cloth. After this oil is dissolved in cool water in a ratio of 1:100. The parquet is washed with the resulting composition - the whitewash will be removed very easily. After that, the floors are wiped with a weak vinegar solution.
	Suitable for heavy soiling. Dissolves in a bucket of water (5 l) in the amount of 100-150 g. The resulting solution is treated with contaminated floors. The method removes stains well. It is important to ventilate the room well after finishing work, and wipe the floors with a weak vinegar solution - it will help to cope with the smell of kerosene.

Important! Parquet does not like the effects of aggressive chemicals, so you can work on it only with soft compounds. It can be methyl alcohol, white spirit, kerosene. But still, before using them, it is better to check on an inconspicuous area of \u200b\u200bthe parquet how the material will react to contact with the selected agent.

Parquet should not be rubbed with coarse abrasive materials. Not suitable for processing metal brushes, nor coarse scrapers. They will simply ruin the coating by scratching the protective top layer.

How to clean laminate from whitewash?

Laminate is a coating that, like parquet, does not like water very much. Excessive moisture will adversely affect this type of coating, so you can not use water in large quantities for washing. Although in general, this type of finishing material for finishing the floor is quite durable and reliable. But still, you need to clean it carefully, otherwise you can damage the outer protective layer. And without it, the material will become subject to all types of mechanical and physical impact, as a result of which its service life will drastically decrease.

With whitewash stains on the laminate, a solution of vinegar 1 - tbsp will help to cope. l. dissolves in a bucket of water with a volume of 5 liters. After that, a soft rag (preferably made of microfiber) is moistened with the resulting solution and carefully squeezed out - the liquid should not flow from it. Then the floors are treated with a damp cloth. The final step is washing the laminate with plain water.

Important! The rag should be rinsed in vinegar solution as often as possible. The cleaner it is, the easier it will be to remove pollution.

Just like parquet, laminate can be processed vegetable oil. It is diluted in warm water in a ratio of 1:100. After treating the laminate with this compound, it is wiped with vinegar diluted in water (2 tablespoons per 5-liter bucket).

On a note! Vinegar can be replaced with citric acid.

Another remedy for removing white plaque from a laminate is a solution of ordinary table salt. The main thing is not to dilute it in large quantities in water, otherwise stains may remain on the floor. The optimal consumption is 0.5 cups of salt per bucket of water. After treatment with this composition, the floor is wiped with a clean chopper moistened with plain water.

Linoleum is a less capricious material than parquet or laminate, but it also deserves careful care and handling. For example, in no case should you rub it with a stiff brush - you can damage it. But whitewash stains from such a coating are easiest to remove.

Linoleum is not afraid of water, so any white spots and plaque can be washed off with a well-moistened cloth. The main thing is that the water is clean and warm. It is always better to rinse a rag with plenty of water to avoid streaks. Better yet, change the water in the bucket to fresh as often as possible.

If stains from linoleum are not wiped off with water and a rag, then you can use a little turpentine or add laundry soap to a bucket of water. Perhaps the last option is the best.

Good for removing whitewash stains from linoleum and salt. It is used in the same way as in the case of the laminate.

It is worth remembering that linoleum should not be tried to be cleaned with gasoline, ammonia and the like. Because of such improper processing coating will fade quickly.

Ceramic tile is a material that can be said to have been tested for centuries. It has been used in construction and decoration for many years and won the love of masters for a reason. It is durable, reliable, not afraid of moisture and practically does not react to chemical substances while remaining inert. That is why it is so often used for finishing floors, especially in the bathroom, kitchen, bathroom - that is, where the humidity is always high, and the floors are treated using various chemical compounds.

It will not be difficult to wash white plaque from such a coating - absolutely any of the above methods can be used, since they will not bring harm to the tile. Also, tiles can be washed with water in any quantity.

How to wash the floor after repair

Step 1. It is recommended to clean the floor surface before cleaning from foreign objects. Interior items are removed (it is recommended to completely remove them from the room), film and newspapers that protected it from pollution, but damaged, as well as all construction debris. Before cleaning, it is recommended to clean the things in the room before washing the floor. Otherwise, the surface of the floor covering will have to be washed again.

Step 2 Large debris is removed from the floor surface - floors can be swept with a broom or brush. If the floors are not swept first, then washing will be quite a challenge.

Step 3 5 liters of water are poured into a bucket. It should be warm or cool, depending on the type of flooring. However, hot water should not be used - rinsing a rag or mop in it will be uncomfortable. Next, the agent selected from the above is added to the water.

Step 4 The mop is well wetted in the prepared solution. Excess water is squeezed out.

Step 5 The floor is mopped. Visually, it can be divided into several sectors and washed each section separately. Corners, joints near walls and heavily polluted places are washed especially carefully.

Step 6 It is important to rinse the rag as often as possible, and change the water to fresh. This will reduce the risk of divorce. Also, after treating the floor with a detergent composition, it is recommended to rinse its surface with clean water.

Video - Cleaning the floor after repair

Video - How to remove grout from tiles

Cleaning after repair is a rather complicated and time-consuming procedure. But using various formulations And folk remedies things will go faster. And if you choose the right technique, then white plaque can be removed without difficulty.