What is cheaper to sheathe a house outside? The better to sheathe the walls inside a wooden house How to sheathe a garden house

Wooden houses are gaining more and more popularity. More and more often those wishing to build a residential building or a country cottage prefer natural materials various blocks, panels and so on. How to sheathe the outside wooden house timber or timber?

What is the outer casing for?

sheathing wooden house outside is not only a way to make it more attractive in appearance. It is carried out both for practical purposes and also serves as protection for the wooden base of the house.

Finish options

There are many options for decorating a wooden house. Each person decides for himself what material to use, based on personal preference and budget.

Read also about the exterior decoration of the house with facade panels.

Let's take a closer look at the most popular materials:

There are other options for sheathing a wooden house, such as: facing tiles, clinker thermal ponels, hinged facade, but all these materials much more expensive and not so popular.

Which material is better and cheaper?

The choice of cladding material in the first place depends on what the house is built from. The range of products for cladding is extremely large, and it is sometimes very difficult to understand it.

It is also worth considering home assignment, if it's small country house hic, then it would be advisable to choose such a material so that the finish will cost you cheap and not deliver extra costs. What will be better and cheaper in your case?

In this article you can learn about the construction frame houses fachwerk style.

log houses

It is believed that log house can be operated without outer cladding, however, so that the wood does not rot longer, and the house did not sag, it is better to protect its walls. Especially if round logs were used in the construction.

The lining or euroboard is best suited. These options are eco-friendly., they are easy to use for sheathing, most insulating materials are suitable for lining or euroboard.

Frame

A frame house requires a lighter material for sheathing. This can also be a lining or a block house (rounded board), but siding would be the best option. This Fairly light and durable to temperature extremes, a material that is also good in decorative terms. It is enough for them to simply finish the house, without special knowledge.

Various wooden or plastic panels. Sheathe them easily, common material cost is low because the panels are cheap. It is better not to use flammable plastic materials to ensure the safety of the home.

From a bar

Log houses can be sheathed on the outside with any materials, since the flat surface of the walls allows you to install frames various types. However, it is still better not to use facing tiles or natural stone - under such a sheathing the beam will quickly rot, and mold and dampness can settle in the house.

From SIP panels

Lightweight and durable SIP panels require the same sheathing. It's great if the material that you will use for these purposes will be decay resistant. Lining and euroboard are not very suitable for these purposes, but siding and PVC panels are a good option.

DIY finishing technology

To make the skin look attractive in appearance and well defended wooden house from external influences, it is necessary to choose the right materials and do everything in accordance with the technology.

Sheathing steps:

Choose the optimal material. The selection criteria may be different, it all depends on your budget and the building material from which the house is built.
Treat the walls of the house. For this, special compounds can be used that impregnate the wood and protect it from destruction by pests, fungus and moisture. It is necessary that the treated layer is completely dry.
Lay a vapor barrier. It is necessary to ensure free and proper air circulation. It can be polyethylene, foil, roofing felt or other options. Please note that it is better to apply such a film on a special rack frame (this is especially true for timber houses).
Next comes the installation of the frame. on which you will install insulation and sheathing. For the frame, metal slats are used, or wooden boards impregnated with anti-rotting treatment.
Next step - laying insulation and waterproofing layer. They will help keep the house warm and protect its walls from moisture and fungus. Can be used as a heater mineral wool, foam plastic, foam plastic. Waterproofing is applied to the insulation.
Next is the actual installation. frame and cladding. The frame is made in the form of an ordinary wooden crate. And from above, the walls are sheathed with the material of your choice: siding, clapboard, panels.

Compliance with technology is very important, because your goal is to protect the house from moisture, pests and any external harmful effects.

Sheathing a wooden house - simple, but required process. Important choose optimally suitable material and make the wall cladding right.

Sheathing a wooden house video instruction.

Wood - durable and beautiful construction material, which at proper care last for many decades. At the same time, wood is a rather expensive material, especially when it comes to various types well-dried timber, so the walls are made thinner, and heat loss is reduced additional insulation and outer cladding. Let's talk about the requirements for the material for sheathing, and also compare various materials to determine which one is best suited for a wooden house. In addition, we recommend to organize a ventilation system (ventilated facade) for any cladding, because this approach prolongs the life of wood and reduces the requirements for cladding materials. We will try to answer the most important question - what is the best way to sheathe a wooden house from the outside, so that it is cheap and beautiful.

Cladding material requirements

Any cladding material must meet the following requirements:

resistance to fire;
precipitation resistance;
resistance to temperature difference;
resistance to ultraviolet;
ease of installation;
low price.

fire resistance- one of the most important parameters for sheathing material (cladding). It is clear that there is a strong fire near the house, then any material will light up, but it should be very difficult to set fire to it with a match and paper, or even douse it with gasoline. In addition, the lining should not be afraid of rain or snow, that is, precipitation should not lead to its destruction. Another condition is resistance to temperature extremes. If facing material strongly absorbs water, then when the temperature drops to negative values, the water in the outer layers will freeze and tear the material. UV resistance protects the cladding from discoloration when exposed to sun rays– the more resistant the material, the less it fades over time. Equally important are parameters such as ease of installation and cost of material. After all, the use of material that is difficult to install increases the overall costs, because it is necessary to use special technologies or equipment, access to which is far from being available to everyone.

Sheathing materials

Here is a list of the most popular cladding materials wooden houses:

various thermal panels;
reinforcing mesh and plaster;
PVC siding;
metal siding;
wood pulp siding;
fiber cement siding and panels;
fake diamond;
block house;
board;
waterproof OSB (Oriented Strand Board) and plywood.

Thermal panels- the simplest finishing option, because they combine polystyrene or foam insulation and various exterior finish. The most popular panels with a brick finish. However, to install them, you must first mount the bars of the ventilated facade. Plaster with a reinforcing mesh can be applied to any hard surface, so it is often used if a wooden house is insulated with foam or highly compressed mineral wool. Such a finishing scheme is very popular - mesh + glue + bark beetle plaster.

All types of siding are mounted on an insulated ventilated facade with wooden blocks or metal profile. Siding - the easiest way exterior finish premises, the difference is only in the cost of materials. The advantage of siding is that you can use both classic rectangular panels and "log-like" panels. Fiber cement panels are used if it is necessary to increase the resistance of the house to fire, because this material is ten times more difficult to set on fire than even a timber treated with pyrophobic impregnation. After finishing the house with fiber cement boards, the sheathing must be painted with waterproof paints. Artificial stone is tried on for finishing a ventilated facade. For its installation, the facade must be sewn up solid material such as fiber cement board, OSB or plywood. Then the artificial stone is glued to the facade, using the same reinforcing mesh as for the plaster.

Block house, that is, a board, the outer part of which imitates a rounded log. Sheathing a wooden house with a block house allows you to restore its exterior to some extent, demonstrating to everyone the owner’s aesthetic taste and his desire to live in a house made of wood. natural materials. A house sheathed with a block house must be regularly treated with antiseptics and impregnations. Read about how to choose antiseptics and impregnations in this article (I think it's called how to choose impregnations or antiseptics, I don't remember exactly). The advantage of a block house over other materials is its very high vapor permeability, so the requirements for facade ventilation are much lower. Another wood material is a wagon board. It is cheaper than a block house and creates a more primitive exterior of the house, but has all the operational qualities of a block house.

OSB and plywood used in three cases:

when it is necessary to create a hard rigid surface for applying plaster;
for facing outbuildings;
for cladding for painting.

Waterproof plywood and OSB have all the advantages and disadvantages of a board and a block house, however, they are much cheaper. Therefore, they are used for facing inexpensive houses and outbuildings, where there are no high requirements for the exterior.

The cost of finishing materials for cladding a wooden house

Below we have given the average cost data posted on the websites of stores selling finishing materials:

Thermal panels Russian production, 60–80 mm thick, panel size 100x68 cm (length and width), cost per panel 1000–2300 rubles, cost per m² 1600–3400 rubles.
Reinforcing mesh for plaster (glue + bark beetle plaster) will cost 20–50 rubles per m² of mesh. The cost of one bag of dry plaster (20 kg) is 150–300 rubles, at a consumption rate of 2–4 kg m². That is, one bag is enough for 5-10 square meters. The cost of one bag of bark beetle plaster (20–25 kg) is 150–500 rubles, at a consumption rate of 3–6 kg per m². That is, one bag is enough for 3–8 m².
PVC siding - the price per m², excluding the cost of the crate, is 100–300 rubles.
Metal siding - the price per m², excluding the cost of the crate, is 200–700 rubles.
Wood-pulp siding - the price per m², excluding the cost of the crate, is 60–200 rubles.
Fiber cement siding and panels - the price per m² is 1-3 thousand rubles.
Artificial stone - price per m² 600–3000 rubles.
Dry board block house - price per m² 200–600 rubles.
Board (lining) made of coniferous and hardwood wood 150–250 rubles per m², from valuable wood 300–700 rubles per m².
Moisture-resistant plywood and OSB 12–16 mm thick price per m² 150–250 rubles.

Conclusion

The right choice of material for finishing a wooden house will allow you to achieve the desired effect at minimal cost. After all, cladding is not only decorative element, but also protects the insulation and walls from external influences. By choosing one or another coating, you can dramatically change the exterior of the house, both emphasizing that it is made of wood, and harmoniously coordinating it with other buildings in the area.

Country houses and cottages, as a rule, are built of wood, concrete or brick, which have insufficient stability to the impact environment. As a result, new houses very quickly become old and unattractive. Therefore, in order to protect the building from precipitation, wind and other weather conditions, the building is usually additionally finished with other building materials. And the first question that arises is: what is the cheapest way to sheathe a house from the outside, without saving on the quality of the finish?

To date, there is a wide variety of different building materials that are applicable for cladding buildings. And every year there is something new. Each of the building materials has its pros and cons, but basically they differ good quality and durability. Therefore, one of the main consumer characteristics is the price of the product, and the question of what is cheaper to sheathe a house from the outside is of paramount importance when choosing a material.

For the maximum cost of a square meter, we conditionally accept 1000 rubles, which is quite affordable for most residents of our country. Of course, the definition of "cheap-expensive" is different for everyone. But provided that the cost of facing the building with stone or brick costs at least 3000 rubles. for 1 sq. m (material cost plus labor costs), the price is 1000 rubles. seems acceptable enough.

Finishing the house with clapboard, block house and other wood materials

Thanks to the fashion for naturalness and naturalness, lumber houses have become especially popular today. The excellent characteristics of such a structure significantly spoil one serious drawback. Wood is subject to rapid destruction from environmental influences and requires mandatory protection. Therefore, it is not enough to build a wooden house, it must be additionally protected.

There is another side of the issue. Not every owner suburban area can afford to build new house or cottage instead of the old building. Therefore, it is necessary to bring into a decent form the building that is already available. And the question immediately arises, how to sheathe an old wooden house from the outside cheaply and extend the life of the building.

Strange as it may sound, but to protect a wooden house better lumber, that is, the same wood. Therefore, materials such as a block house (wooden siding under a log), lining and others are perfect as cladding for such buildings. These sawn timber are still processed at the factory with all the necessary means to prevent rotting and destruction of the tree.

At the same time, the cost of such materials is quite democratic, a block house of Ukrainian or Russian production can be purchased at a price of 350-700 rubles. per square meter, lining for outdoor work - 400-1000 rubles. The cost of imported building materials, of course, is somewhat higher.

It is worth considering other options than it is cheaper to sheathe a wooden house from the outside. As well as other buildings made of bricks, concrete blocks and other building materials.

Facade thermal panels

Depending on the material from which the building is built, as well as the requirements for heat and sound insulation, as a rule, they choose how to sheathe the house from the outside cheaply (the photo below shows this option).

If a wooden structure holds heat well, then a brick or concrete house has very cold walls. Therefore, for its sheathing, it is preferable to choose materials with good thermal insulation. The best option in this case are thermal panels consisting of polyurethane and ceramics. To date Russian manufacturers the production of thermal panels has been established quite well, so the cost of this material is quite reasonable. If the cost of sheathing from foreign companies varies between 1600–2500 rubles. for 1 sq. m, then domestically produced panels can be purchased for 900-1300 rubles per square.

Fiber cement panels

For stone buildings one more good option than to sheathe a brick house on the outside cheaply, are fiber cement panels. It's relative new material, the release of which has already been established by Russian manufacturers, and they predict a great future for it. Excellent strength characteristics and ease of installation make this material particularly attractive. The cost of imported material is 1600-2000 rubles. for 1 sq. m, while the domestic counterpart can be purchased for 700-900 rubles, without losing quality.

Fiber cement panels are highly durable, reliable and resistant to changeable weather conditions. The only drawback is their rather significant weight, so they are practically not used for finishing wooden or panel houses.

Vinyl or metal siding

We choose further, the cheaper it is to sheathe the house from the outside. It is also convenient and profitable to finish a brick or concrete building with siding. In addition, due to its low weight, this building material can also be used for sheathing a wooden structure.

Both types of siding have their pros and cons. Metal siding can withstand a greater temperature difference, is more durable and reliable, but strongly removes heat from the walls of the building. Vinyl material, though not warm, but not cool.

At the same time, the cost of different types does not differ much: the price of metal siding is about 100-195 rubles, vinyl type - 190-200 rubles. per running metre. However, when sheathing a large building, this relatively insignificant difference can result in a tangible amount.

Sheathing with profiled sheet

Another option, the cheaper it is to sheathe the house from the outside, is corrugated board. More inexpensive material, perhaps, you will not imagine. The price of this building material varies from 160 rubles. up to 350 rubles per linear meter, depending on the region and brand of the sheet. It should be borne in mind that, as a rule, a profiled sheet with small stiffeners is selected. Among the disadvantages of this material is its poor thermal conductivity, which can be compensated for by additional thermal insulation. Just like siding, corrugated board is attached to the frame, and the sheathing process is much faster due to the larger area of \u200b\u200bthe attached canvas. Installation of corrugated board does not require special knowledge and skills, so you can sheathe a house with this material yourself even alone, saving on the involvement of professional builders.

Both siding and corrugated board can be used to decorate houses made of timber or logs, as well as panel houses.

Today, these are probably the most common materials that can be purchased at a reasonable price. But thanks to the rapid development of industry, who knows what the building materials market will offer us tomorrow?

Despite the development of construction technologies and the introduction of innovative materials, wood is not inferior to its position as a material for construction. low-rise buildings. Statistics show that the share of new wooden buildings in private housing construction is about 23%, yielding in percentage terms only to brick low-rise buildings and houses made of concrete blocks of various modifications. With such popularity of residential buildings made of wood, the cladding of a wooden house from the outside is in demand, which can give the new building an archaic look of a Russian hut and, conversely, turn the buildings of an old building into a modern "teremok".

Why do we need sheathing of wooden walls, requirements for finishing materials

The centuries-old practice of using wooden residential buildings on the territory of Russia shows their fairly acceptable performance. IN modern conditions Finishing the outside of a house with wooden walls has several goals:

Protection of walls from adverse climatic factors - precipitation, wind, icing, sudden temperature changes. The outer layers of the sheathing material must not be impregnated with sedimentary moisture and condensate.
Creation of reliable thermal insulation and waterproofing of residential premises. The lower the material's thermal conductivity and vapor permeability, the better.
Protection of walls from mechanical damage such as cracks, chips.
Additional sound insulation interior spaces Houses.
Protection of the wooden part of the house from dampness, rot, fungi.
Decoration of the facade of the building in a certain architectural and artistic style. In order for the appearance of the building to remain unchanged for as long as possible, it is desirable to select a material that is resistant to direct sunlight and ultraviolet radiation. This reduces the chance of fading/discoloration of the skin.
Protecting the house from open fire, ensuring the fire safety of the building.

The surface can be protected and reinforced in various directions

An important requirement for cladding is ease of installation when sewing walls, which minimizes the need for special equipment.

As a result, the best solution than to sheathe a wooden house from the outside would be the use of facing materials adapted to perform utilitarian (protective) and aesthetic functions. Not all of them are equally have such properties, so sometimes you have to choose between beauty and reliability.

How finishing affects the heat and sound insulation of the house

Even if sheathing materials protect the outer walls of a wooden house from moisture, sun and mechanical damage, this does not guarantee a significant increase in the heat and sound insulation of the building. The energy efficiency of the cladding will be higher if a layer of insulation (mineral wool, polystyrene foam, polystyrene) is placed under the cladding, which is placed in the voids that are left between the wall and the cladding during installation. In some cases, insulation is already on the installed components - most often sandwich panels do this.

Two in one - beauty and insulation in one bottleThe most popular materials for exterior cladding

When choosing how to sheathe a wooden house outside cheaply, but with maximum thermal protection and beautiful decorative effect there are always several options. The most popular materials for exterior cladding are stone, wood and plastic. Consider the advantages and disadvantages of using these materials when cladding the outside of the house.

Sheathing with clapboard and block house

Clapboard (or wagon board) is called a thin sheathing board made of natural wood. From the point of view of environmental friendliness, lining is an ideal material for cladding a house with wooden walls, since the house turns out to be made entirely of natural wood.

Additional Information. The term "lining" has firmly taken root in everyday speech to refer to cladding boards having a tenon-groove connection, manufactured by the industry in accordance with GOST 8242-88. The original purpose of wagon boards was the lining of wagons, which then "migrated" to the construction industry.

The advantages of lining

Key Benefits outer cladding clapboard walls are considered:

relatively low weight of the facing coating, which saves on strengthening the foundation;

The lining is essentially a thin board

natural wood lining does not contain toxic substances and has a beneficial effect on the human body;
the wall of the house "breathes" and does not accumulate condensate, thereby preventing the formation of mold and mildew;
excellent heat-shielding and noise-absorbing properties;
lining from lining is endowed with high performance, resistant to temperature extremes, high humidity and mechanical damage.
the outer surface of the wagon board is easily painted, allowing you to give the facade of the house color shades of any design style;
good ventilation of clapboarded walls thanks to special air ducts in the solid board.

Disadvantages of lining and how to deal with them

Among the disadvantages of wooden cladding, the following factors should be noted:

combustibility inherent in natural wood;
excess moisture contained in damp skin;
the presence of natural structural defects;
susceptibility to destruction from insects.

To increase the period of trouble-free operation of the wagon board, it is treated with special compounds applied to the outer surface of the board:

antiseptics - to protect wood from decay, bacteria and insects, from exposure to ultraviolet radiation;

impregnations - to impart fire-fighting properties;

stains and varnishes - to create color shades and protection from moisture, sunlight and insect pests.

Installation of lining is carried out only after pre-treatmentWhat type of lining to choose for external cladding

Sheathing board is divided into four quality classes, depending on the type and location of defects and the presence of knots:

class "Extra" is assigned to the board with flat surface devoid of any defects, knots and cracks;

class A - the board has separate knots in the absence of potholes or holes from fallen knots;

class B - there are cracks, knots or holes from them, recesses and dents on the board, which were eliminated directly at the factory with putty;

class C - a complete analogue of defects, like class B boards, but not eliminated.

Such a detailed classification of the wagon board allows the developer to determine for himself the budget variant of the cladding that corresponds to the chosen facade design while minimizing costs and ensuring the required quality. An elite “teremok” is unthinkable without an “extra” class lining, while for an unbiased suburban residential extension, class B and C boards are enough.

Where and when is a block house used

A modern version of a cladding flat lining is a block house (from the English. Block house) with a convex front surface, imitating a rounded log segment, and a flat back surface. The wall sheathed with a block house looks colorful, not inferior in attractiveness to traditional Russian huts.

Clearly about the use of a block house in home decoration on video:

Being, in its essence, an improved lining, the block house is endowed with the same pluses and minuses inherent in the wagon board.

Cladding with brick, decorative stone and tiles

Application for brick sheathing, decorative stone or tiles will make it possible to clad the house outside cheaply and in the shortest possible time. Even the old nondescript wooden structure, dressed in brick or artificial imitation of natural stone, cannot be distinguished from brick mansions or stone castles.

The transformation of a wooden house into a brick one has two main goals:

If the house looks unpresentable, was built from wood of dubious quality, with violations of the architectural geometry of the building, then the brickwork will be able to correct the facade and hide the flaws.

Brickwork is necessary not so much to improve the facade, but to increase the strength and stiffness of the wall structure. The renovated house becomes heat-shielded and will be able to serve its owners for a long time.

With proper cladding, a gap is left between brick and wood. Pros and cons of using bricks for decoration

The use of brick for the exterior cladding of a wooden house has significant advantages over the use of other materials:

the availability of the material;

low water absorption, providing excellent resistance to sediment moisture;

resistance to cyclical and sudden temperature changes;

good sound-absorbing and heat-insulating properties;

long service life exceeding 20 years.

Brick cladding is good budget option in terms of price / quality against the background of expenses for facing from decorative coatings.

Of the shortcomings, it should be noted the large weight of the facing masonry, which creates an additional load on the foundation. It is advisable to calculate before starting work whether it is worth strengthening it.

Additional nuances of finishing the house with bricks on the video:

Porcelain stoneware and clinker

Of the artificial stones, porcelain stoneware has gained wide popularity, the cladding of which gives a truly “stone” solidity to the entire residential complex. The purchase and installation of porcelain stoneware slabs is more expensive than other cladding methods, however, long-term operation that does not require repair and is always fashionable architectural style more than cover all expenses.

Along with porcelain tiles, other modifications are made facing tiles imitating brick and natural stones(under granite, basalt or marble), capable of giving an individual flavor to a simple wooden building.

Especially high strength and wear resistance has clinker tiles obtained by extrusion followed by firing at a temperature of 1250 ° C. Clinker tiles are characterized by minimal water absorption, since technological firing gives the tile an almost vitreous structure with water-repellent properties.

siding

On Russian market building materials, siding is called cladding panels, which have a perforated edge on one side for fastening to the frame, on the other - an edge with a slight protrusion for covering the fasteners of the underlying elements.

Stone effect siding panels

Thus, the skin is given integrity and an attractive appearance.

Additional Information! The term "siding" often refers only to wall cladding panels of certain sizes. This approach is highly incorrect, since siding (siding) translated from in English means "outer cladding". So in the 19th century in the USA and Canada they called planed painted wooden planks, nailed to the wall so that the bottom edge of the board hangs slightly over the top edge of the board set lower. With such a "leak", sedimentary moisture rolled straight down the cladding, without penetrating to the wall. IN general case siding can even be called lining or block house, as they also belong to the exterior cladding.

Varieties of siding

Siding panels are made by pressing, followed by applying the texture of wood, stone and other materials. There are several types of panels for siding:

Wooden siding. Obtained by pressing wood pulp high temperature. It has increased environmental friendliness, attractiveness, low thermal conductivity. The disadvantage is poor resistance to moisture.
pvc siding. This material is also called vinyl siding. It is represented by lightweight PVC panels with a cellular structure, used as an independent heat-insulating layer due to the rather low thermal conductivity.

About the nuances and procedure for finishing the house with siding on the video:

Vinyl siding is the most demanded budget facing material, which compares favorably with other types of siding in the following indicators:

does not increase the weight load on the foundation;
does not have a tendency to corrosion and decay;
tolerates temperature fluctuations from -50. up to +60 °С;
retains an attractive fresh look for over 20 years;
easy care, easy to clean.

Metal siding. For its production aluminum, zinc or steel is used. The thickness of the plates is 5 mm, installation is much easier than other types of cladding.

Fiber cement panels. Siding from a mixture of polymer fibers and cement. Differs in durability and high degree of fire safety.

facade paint

Wall painting is one of the most inexpensive ways increase their attractiveness. Also, well-chosen paint is additional protection wooden walls from ultraviolet and moisture. Based on this, the requirements for paint and varnish coatings were formed:

Weather resistance. In addition to weathering, this includes the sun's rays, sudden changes in air temperature and other negative effects.

The manufacturer labels his products according to their purpose.

Biosecurity. Properly selected and applied paint is not eaten by any insect, and in addition, it prevents the formation of mold, fungi and the development of the decay process.

Safety. After drying, the paint layer should not emit toxic substances.

Durability. The paint must retain all its properties throughout the entire service life - usually it is 5-7 years.

Types of paints

In order not to get confused in other characteristics, it is enough to learn for what purposes this or that basis is better suited.

Oil. An old-timer on the market, inferior to newcomers in quality, but winning in price. Of the minuses: dries for a long time, fades quickly, smells unpleasant. For work requires dilution with drying oil.

Acrylic. They dry quickly and are well absorbed into the surface, do not react to ultraviolet light, are vapor-permeable and environmentally friendly.

Alkyd. According to the result of staining, they are divided into matte and glossy. Thanks to the resins contained in the composition, the painted surface becomes moisture resistant. No strong odor.

Silicone. In addition to all other advantages, silicone paint additionally increases the mechanical strength of the painted surface.

The type of paint is also indicated on the packaging Nuances of the use of paint and varnish coatings

Savings and good result staining depends on the correct use of paints and varnishes.

In addition to the cost, you also need to look at the paint consumption ml / m²

When choosing paint from a foreign manufacturer, one must understand that there are no serious frosts in Spain, unlike Finland. Therefore, for hot regions, it is better to take Spanish paint, and for frosty regions, Finnish products.

It is equally bad for painting when it is done in damp or hot weather. In the first case, the adhesion of the paint to the surface deteriorates, and in the second case, it may crack due to drying too quickly. If painting takes place in the morning, then first of all it is necessary to check whether dew has fallen out. Perfect option it is a dry, slightly cloudy day, with air humidity up to 50% and a temperature of +5/+20 °C.

Painting is a very simple process, but before starting it, do not forget to study the instructions on the can of paint, if only because it indicates how many layers must be applied for a good result.

How is the installation of the exterior cladding of a wooden house

Regardless of the type of material used for cladding wooden walls, cladding measures outer wall reduced to a unified algorithm.

Installation of all types of cladding is approximately the same

Treatment outer surface wooden walls with antiseptic compounds. The purpose of the treatment is to prevent the possible destruction of wood from various kinds of biological factors. After installation of facing panels, the walls will no longer be available for processing.

Arrangement of a vapor barrier for natural air circulation in the wood of the wall using films, foils or special vapor barriers.

The construction of the frame (battens) for the heat-insulating layer.

Thermal insulation installation. For placement between the panels and the wall, foam, foam or mineral wool is used

Installation of waterproofing.

Installation of facing materials.

Prices for finishing materials for facing wooden houses

To choose a budget option for facing the outer walls of a wooden house, you need to navigate at least in the average prices on the line of sheathing materials. On the websites of organizations offering materials for sheathing, the following price ranges are indicated:

lining - from 150-250 rubles / m² for softwood up to 300-700 rubles / m² for valuable wood species;

block house - from 200 to 600 rubles / m²;

artificial stone - from 600 to 3000 rubles / m²;

Always in specialized stores wide choose- quality and price

brick - within 800-1600 rubles / m²;
wood siding - from 60 to 200 rubles / m²;
PVC siding - from 100 to 300 rubles / m²;
metal siding - from 200 to 700 rubles / m²;
fiber cement siding - from 1000 to 3000 rubles / m².

In addition to the price, it is worth evaluating the availability of the purchase of material and delivery. If the material is difficult to find, then if the quantity is incorrectly calculated, then there is a risk of buying the missing cladding at exorbitant prices or finishing part of the work with another cladding.

It is important! When choosing an inexpensive facing material, it is necessary to pay attention not only to the prices for sheathing, but also to the prices of component parts, as well as consumables.

In this case, the cladding of a wooden house will be inexpensive for the developer and will allow minimum expenses build a new house or renovate an old one.

About a non-standard solution in the exterior of the house on the video:

Conclusion

The choice of a budget cladding option should not be reduced to a simple arithmetic operation showing where the least money will be spent on purchasing the material.

It is also necessary to take into account the cost installation work, during the implementation of which there is a need to equip the frame and battens for thermal insulation, as well as a resource for trouble-free operation of the house. For example, the cost of wood siding is not high, but wood cladding must be periodically impregnated with special compounds to maintain antiseptic properties. Practice has shown that the most budget option is PVC siding and lining of medium quality.

Also, on our website you can see the most popular projects wooden houses With various options facade finishes, from construction companies presented at the exhibition of houses Low-rise Country.

Some building materials from which walls are erected immediately imply the need for exterior decoration of the house: the picture is very unsightly. Others may lose their appeal over time. And the third case is extensive fissure formation, which is "treated", but the results remain visible. In all these cases, the question arises: "How to sheathe the house from the outside." Moreover, most often it is required to “sheathe” - without the use of a solution or other similar means that require a large number money and time. I want to do everything quickly and, very desirable - inexpensively, and even, if possible, with my own hands. Oddly enough, but the choice of materials and technologies is, and considerable.

Basic Rules

When choosing materials for cladding a house from the street, be sure to remember that in order to maintain normal humidity in the premises, the vapor permeability of materials must decrease from inside the room to the outside. That is, the exterior finish should conduct steam better than the material of the walls. Then high humidity, which is typical for our dwellings, will be displayed naturally through the walls (explanations in the photo).

When deciding how best to sheathe a house from the outside, do not forget to take into account the vapor permeability of materials

If this principle is violated, moisture will accumulate at the boundary of materials with different vapor permeability. It condenses, creating conditions for decay, the development of fungi and mold. IN winter time freezes, destroying the material of the wall and / or finishes. Sooner or later, such a system will have to be dismantled and redone.

The trouble is that only wood meets this requirement. Most of other materials for exterior decoration of the house has a low vapor permeability. The problem is solved in two ways:

A ventilated facade is being installed. Between the wall or a layer of insulation (with high vapor permeability) and the finish, a ventilated gap with a width of 60 mm to 150 mm is left. At the bottom of the skin leave ventilation holes at the rate of 75 cm2 for every 20 m2 of wall, including windows and doors. Air will enter through them. Outlets are provided at the top. With such a device, moisture will be removed from the wall material or insulation, and the outer skin will protect against precipitation and perform a decorative function.
The principle of finishing a house using a ventilated facade
Finishing material is attached directly to the wall. But from the inside, the wall must be protected by a layer of vapor barrier. In this case, the penetration of vapors into the wall material is prevented, it remains dry. Excess moisture is removed by the ventilation system.

Today, the second option is becoming more and more popular. There are very effective thermal insulation materials allowing for a significant reduction in heating costs. But they have very low vapor permeability (expanded polystyrene and extruded polystyrene foam). When using them, only the second humidity control scheme is possible. When choosing how to sheathe a house, consider these points.

wood paneling

Wood in construction and decoration has been used for centuries, and it looks like it will be relevant for a long time to come. All thanks to the excellent appearance and the ability to regulate the humidity in the room. This is perhaps the only material that will easily remove excess moisture, no matter what material the walls are built from.

Wooden sheathing can have a completely non-standard look: different colors and sizes, different direction. It's simple and the effect is amazing

The most popular wall cladding materials are block house and timber imitation. There is also lining for exterior decoration - it has a greater thickness compared to the one intended for interior decoration The rest of the house is no different.

The block house imitates the surface of a rounded log - the front part has a rounded shape. Imitation of a bar is very similar to a planed bar. Both types of cladding are attached to the crate, then sanded and covered with protective impregnations, optionally varnished or painted.

What lumber looks like for exterior cladding of a house

If you can’t decide how to sheathe the house from the foam blocks on the outside, consider the option of wood cladding. In this case, a crate (metal or wooden) is nailed to the walls. If necessary, a heater is laid between the planks - basalt wool (styrofoam or polystyrene foam cannot be used), and then the wooden sheathing is nailed.

This building is sheathed with imitation timber. Under the skin there can be a brick, a log house, a frame or any of the building blocks

If you need the cheapest option, for most regions of Russia this is an ordinary planed board. Its thickness is from 40 mm, it is stuffed in the same way as a lining or a block house on a crate, the lower end of the upper board goes 10-20 mm onto the one located under it. It turns out the principle of the bump. So you can cheaply veneer a country house or even a residential one. With proper processing, such a lining has a very good appearance.

What is the cheapest way to sheathe a house outside? For middle lane Russia - wooden planed board

The disadvantages of such a finish are the same as for any wood: it can be damaged by pests, rot, without proper care it quickly loses its decorative effect, becomes dark and ugly. If you want to sheathe a house and not think about it for years, this is not your choice. Behind wooden paneling care is required, and, most often, annual.

How to overlay a house with bricks read here.

Siding

In some regions, boards and other lumber are far from the most available materials. In this case, it is cheaper to upholster the house with siding. This is the option when, having finished once, you can forget about it for a long time.

If you are thinking about how to decorate a house from a bar from the outside, perhaps your option is siding.

Since the sheathing is nailed to the crate, the facade is ventilated. If you need to finish inexpensively wooden walls(from timber, logs, shields) siding is one of the options. It can also be used for building from any other material: foam block, aerated concrete, slag filling, etc. This cover is universal.

Vinyl

Siding is made from polyvinyl chloride (PVC) and is therefore also called vinyl siding. It is a strip of material with a width of 205 and 255 mm, a thickness of 1.1 mm and 1.2 mm. On the longitudinal edges there is a lock on one side, on the other - perforation for fasteners (self-tapping screws are more often used).

The siding is also attached to the crate. It is recommended to use a special metal one, but impregnated wooden blocks are quite suitable. Only regular starting and side lanes will be needed. The only caveat: the self-tapping screws need to be “short” a little, leaving a backlash in order to compensate for temperature changes in materials. With this installation, the siding will not crack from the stresses that have arisen.

The advantages of this material for outer skin at home: low prices, easy installation.

Flaw vinyl siding: it quickly fades in the sun, so it is advisable to use soft colors. Has a fairly wide temperature regime operation: from +50°C to -35°C, but even in slight frosts it becomes brittle and easily damaged.

Another point: the houses sheathed with siding, which have a broken configuration, look good. If the building is rectangular, without architectural excesses, it does not have the most attractive appearance (in confirmation of the photo below).

If the building is just long, without reliefs and ledges, wall cladding with sadding will not embellish it very much.

Metal

Metal siding is a strip of thin aluminum or galvanized steel, which is coated with a protective and decorative coating. It has the same mounting system as vinyl.

Sheathing a house with metal siding is simple: you can do it yourself even without much building experience

The coating may be of polymers. Differs in reliability, resistance to burning out, other climatic factors. Its disadvantage is the limited choice of colors. The second coating option is powder coating. The color gamut is much wider, the paint lasts for years without signs of flaking.

If you are looking for something to clad the outside of the house so that the finish is reliable and bright, one of the metal siding options may suit you. It can be bent, broken very difficult, installation is not very difficult: you need good metal scissors, self-tapping screws, a screwdriver or a screwdriver. All installation features are the same as for vinyl, with the only difference being that metal can also be mounted at low temperatures.

It is not easy to harmoniously decorate a building sheathed with metal siding

From the point of view of durability, this is a good option, but from the point of view of aesthetics, it is difficult to work with it: it looks too “productive”. The building no longer looks like a residential building, but a warehouse or some kind of workshop.

basement

This is one of the varieties of vinyl siding, but it has a completely different configuration, appearance and greater panel thickness. It was developed specifically for decorating and protecting the plinths of buildings, but it was so well liked that it was also used for facade cladding. External design - under brickwork different kind and colors, with or without drawings, wild stone. Sometimes imitation is so successful that you can't understand what's in front of you. brick cladding, and vinyl, you can only touch the wall.

In this house, walls and gables are sheathed with plinth siding, just different collections are used.

Mounted, like other types, on the crate, there is perforation and locks. The difference is that the basement siding panel does not look like a long rectangle, but a certain section of the wall with curly edges. These curly edges are joined. Accordingly, the crate must be adjusted to the size of the fragment. When installing, first the edge of the panel is brought into the lock of the already installed one, matches are achieved, and then fixed. The main thing - during installation, do not tighten the screws too much, leaving the siding to move with temperature changes.

You can read about the installation of basement siding here (one of the points).

The lathing can be made of treated wooden bars (protective impregnation) or from drywall profiles (galvanized). How to mount basement siding on the base, see the video. Similarly, it is attached to the wall. Area difference.

Features of finishing a house made of aerated concrete are described here.

Fiber cement boards and siding

Relatively recently appeared on our market new cladding: fiber cement boards and siding from the same material. They consist of wood fibre, quartz, mica, cement, may contain chlorine and asbestos (some materials used only for exterior decoration). This mixture is molded into sheets, then dehydrated in several stages, and fired using some technologies. Then a protective and decorative coating is applied to the surface:

acrylic - inexpensive, resistant to fading;
hydrophilic - high resistance to abrasion and fading (30 years), very low percentage of water absorption, but expensive;
photoceramic - retains color for a long time, dirt is easily washed off, the price is average.
Do not know what is the best way to sheathe the house outside? There are fiber cement boards, decorative and reliable, mounted on a frame. It is easy to mount on log house, frame or brick. Any

The coating can be smooth - glossy and matte, can imitate brickwork, wood and other finishing materials. Mounted on mounting rails, fastened to the wall with clamps. This material may suit you if you do not know how to sheathe frame house outside: it creates a continuous surface, the panel joints are sealed and precipitation will not get inside.

This house is also lined with fiber cement boards.

How to fix fiber cement boards, see the video.

Fiber cement siding is made using the same technology, only it is molded into long strips. They are basically standard: 3600*190*12mm. This material is cut with a jigsaw, installed on wooden crate overlap (according to the principle of a cone) and are nailed to it or twisted with self-tapping screws.

Thermal panels

Thermal panels are a material that performs two functions at once - cladding and external insulation of houses. A layer is applied to the thermal insulation layer at the factory decorative coating. It looks like marble a natural stone, does not burn, has low water absorption characteristics.

It is possible to clad and insulate a house at the same time with one material using thermal panels

This finishing material is made on the basis of foam, mineral wool or extruded polystyrene foam. Depending on the type of insulation, the installation method is selected: polystyrene foam and polystyrene are glued to the appropriate composition. The joints are closed with a special aluminum bar or rubbed with paste.

Facade cladding panels based on mineral wool are mounted only on a special profile system, the joints are also sealed.

A very attractive idea is to immediately insulate the house and revet it. Excellent appearance, and the characteristics of such a cladding are impressive. It’s just a pity that there is little operating experience and there are no reviews yet: it appeared quite recently.

There are also clinker thermal panels. Clinker tiles are glued to the insulation. The material is not cheap, but the characteristics are impressive, as is the variety of finishes.

Another option for thermal panels - with clinker tiles

The choice of materials with which you can sheathe the house at any time - in winter or summer - is considerable. There are expensive options, there are cheaper ones. In any case, in addition to cost, be sure to consider vapor permeability. Then you do not have to deal with mold and dampness.

Wood is a durable and beautiful building material that, with proper care, will last for many decades. At the same time, wood is a rather expensive material, especially when it comes to various types of well-dried timber, so the walls are made thinner, and heat loss is reduced by additional insulation and outer skin. We will talk about the requirements for the material for sheathing, as well as compare different materials to determine which one is best suited for a wooden house. In addition, we recommend to organize a ventilation system (ventilated facade) for any cladding, because this approach prolongs the life of wood and reduces the requirements for cladding materials. We will try to answer the most important question - what is the best way to sheathe a wooden house from the outside, so that it is cheap and beautiful.

Cladding material requirements

Any cladding material must meet the following requirements:

resistance to fire;
precipitation resistance;
resistance to temperature difference;
resistance to ultraviolet;
ease of installation;
low price.

fire resistance- one of the most important parameters for sheathing material (cladding). It is clear that there is a strong fire near the house, then any material will light up, but it should be very difficult to set fire to it with a match and paper, or even douse it with gasoline. In addition, the lining should not be afraid of rain or snow, that is, precipitation should not lead to its destruction. Another condition is resistance to temperature extremes. If the facing material strongly absorbs water, then when the temperature drops to negative values, the water in the outer layers will freeze and tear the material. UV resistance protects the cladding from discoloration under the influence of sunlight - the more resistant the material, the less it fades over time. Equally important are parameters such as ease of installation and cost of material. After all, the use of material that is difficult to install increases the overall costs, because it is necessary to use special technologies or equipment, access to which is far from being available to everyone.

Sheathing materials

Here is a list of the most popular materials for sheathing wooden houses:

various thermal panels;
reinforcing mesh and plaster;
PVC siding;
metal siding;
wood pulp siding;
fiber cement siding and panels;
fake diamond;
block house;
board;
waterproof OSB (Oriented Strand Board) and plywood.

Thermal panels- the simplest finishing option, because they combine polystyrene or foam insulation and various exterior finishes. The most popular panels with a brick finish. However, to install them, you must first mount the bars of the ventilated facade. Plaster with a reinforcing mesh can be applied to any hard surface, so it is often used if a wooden house is insulated with foam or highly compressed mineral wool. Such a finishing scheme is very popular - mesh + glue + bark beetle plaster.

All types of siding are mounted on an insulated ventilated facade with wooden bars or a metal profile. Siding is the easiest way to decorate a room, the difference is only in the cost of materials. The advantage of siding is that you can use both classic rectangular panels and "log-like" panels. Fiber cement panels are used if it is necessary to increase the resistance of the house to fire, because this material is ten times more difficult to set on fire than even a timber treated with pyrophobic impregnation. After finishing the house with fiber cement boards, the sheathing must be painted with waterproof paints. Artificial stone is tried on for finishing a ventilated facade. To lay it, the facade must be sewn with a hard material such as fiber cement board, OSB or plywood. Then the artificial stone is glued to the facade, using the same reinforcing mesh as for the plaster.

Block house, that is, a board, the outer part of which imitates a rounded log. Sheathing a wooden house with a block house allows you to restore its exterior to some extent, demonstrating to everyone the owner’s aesthetic taste and his desire to live in a house made of natural materials. A house sheathed with a block house must be regularly treated with antiseptics and impregnations. Read about how to choose antiseptics and impregnations in this article (I think it's called how to choose impregnations or antiseptics, I don't remember exactly). The advantage of a block house over other materials is its very high vapor permeability, so the requirements for facade ventilation are much lower. Another wood material is a wagon board. It is cheaper than a block house and creates a more primitive exterior of the house, but has all the operational qualities of a block house.

OSB and plywood used in three cases:

when it is necessary to create a hard rigid surface for applying plaster;
for facing outbuildings;
for cladding for painting.

The cost of finishing materials for cladding a wooden house

Below we have given the average cost data posted on the websites of stores selling finishing materials:

Russian-made thermal panels, 60–80 mm thick, panel size 100x68 cm (length and width), cost per panel 1000–2300 rubles, cost per m² 1600–3400 rubles.
Reinforcing mesh for plaster (glue + bark beetle plaster) will cost 20–50 rubles per m² of mesh. The cost of one bag of dry plaster (20 kg) is 150–300 rubles, at a consumption rate of 2–4 kg m². That is, one bag is enough for 5-10 square meters. The cost of one bag of bark beetle plaster (20–25 kg) is 150–500 rubles, at a consumption rate of 3–6 kg per m². That is, one bag is enough for 3–8 m².
PVC siding - the price per m², excluding the cost of the crate, is 100–300 rubles.
Metal siding - the price per m², excluding the cost of the crate, is 200–700 rubles.
Wood-pulp siding - the price per m², excluding the cost of the crate, is 60–200 rubles.
Fiber cement siding and panels - the price per m² is 1-3 thousand rubles.
Artificial stone - price per m² 600–3000 rubles.
Dry board block house - price per m² 200–600 rubles.
Board (lining) made of coniferous and hardwood wood 150–250 rubles per m², from valuable wood 300–700 rubles per m².
Moisture-resistant plywood and OSB 12–16 mm thick price per m² 150–250 rubles.

Conclusion

The right choice of material for finishing a wooden house will allow you to achieve the desired effect at minimal cost. After all, the sheathing is not only a decorative element, but also protects the insulation and walls from external influences. By choosing one or another coating, you can dramatically change the exterior of the house, both emphasizing that it is made of wood, and harmoniously coordinating it with other buildings in the area.

The design of the cottage inside is as important as the appearance of the building. Dacha is traditionally considered a place of rest and unity with nature. Here it is absolutely unimportant whether a capital house stands on the site or country houses from a block of containers, the main thing is to provide coziness and comfort, without which a high-quality country holiday is unthinkable.

In this article, we tried to make an overview of the most acceptable options for interior decoration.

Preparatory work

When deciding how to finish the cottage inside, it should be remembered that the specifics country house does not provide for regular heating in winter ().

Moreover, if you plan to visit the site in winter, then the interior decoration of the cottage must withstand sudden temperature changes during heating.

Facing or repairing the cottage inside refers to the finishing work and must be carried out after the installation of all plumbing communications and electrical wiring is completed.
All work should start from the far room, if the house is two-story, then from the top floor, gradually moving towards the exit.
In the event that there is a possibility of soiling an already lined surface, for example when plastering, it is better to cover it with plastic wrap.
Plastering, as well as whitewashing or painting, are done from top to bottom.
Naturally all essential tool and materials should be prepared in advance.

Finish options

Before finishing the walls in the country house inside, think about how often you are going to change the interior. For a dynamic nature that does not tolerate monotony, it is better to plaster or revet the surface with drywall. If country interior do-it-yourself inside is done once and for many years, then you can use clapboard, laminate or plastic panels.

Ceiling lining

The most common option for finishing the ceiling is traditionally considered whitewashing or painting. Absolutely any healthy person can make such a lining. Its price, in comparison with other options, is the most acceptable, painting instructions are also familiar to almost everyone from childhood.

Tip: the fastest option is to use a spray gun powered by a household vacuum cleaner, but with such painting, all other surfaces must be covered with a film.

Suspended ceiling can be made of plasterboard or use stretch ceiling, but in any case, do not forget to leave a few holes around the perimeter to ensure normal ventilation, they are easily decorated with special plugs. In plasterboard ceilings, the issue of ventilation is solved with the help of built-in lights.
Now eurolining on the ceiling is very popular. Thanks to the mounting brackets and the special shape of the board, the ceiling is sewn up completely, without visible gaps. In this case, nails are used only for fastening the mounting brackets and are closed with a board.
For an ecological or country style, it would be appropriate to use an unedged board. Its rough forms will give the room the appearance of a forest hut. Only in this case, the board should be sewn in two layers to hide the natural gaps between the planks.
Do-it-yourself cottage design inside can be done using the so-called breathing beams. If such load-bearing beams on the ceiling are not provided for by the design, then a dummy is made and decorated under natural wood. They will look especially beautiful on a broken attic ceiling.

wall decoration

IN brick houses the arrangement of the cottage inside can be done by plastering. Such a coating will be universal and durable. Plastered walls can be painted or wallpapered, but the process itself requires serious professional skills and such cladding will cost a lot.
If a periodic change of scenery is foreseen, then the best solution would be to use drywall.

This material is of two types.

GKL - drywall sheet, consists of alabaster, pasted over on both sides with cardboard, the material is not very durable and is used more for mounting ceiling structures. Plus, GKL is afraid of moisture, so it is not suitable for the walls of a country house.

GVL - gypsum fiber sheet, the filler here is also alabaster, but it includes reinforcing fibers for internal reinforcement. Plus, instead of ordinary cardboard, it is used moisture resistant coating from cellulose. Nails can be safely driven into such walls and, most importantly, they are not afraid of dampness.

Wall decoration in the country house inside clapboard is one of the easiest and available options. The material is environmentally friendly. Initially, horizontal guide rails are stuffed onto the walls in increments of 50 - 70 cm, on them mounting brackets planks are attached. The tree should be pre-treated with an antiseptic, depending on the style of the interior, the lining can also be varnished.
In the same way, you can sheathe the walls with laminate, but as in the case of drywall, the material must be taken moisture resistant.
One of the most popular materials today are plastic panels. The installation technology here is almost the same as that of a laminate or lining. But there are much more decor options, plus plastic on this moment considered one of the most durable and unpretentious materials.

Tip: you can use wallpaper in the country, but it is likely that they will peel off due to temperature changes. Therefore, if you do not plan to re-paste the wallpaper every spring, it is better to just paint the walls with acrylic paint.

How to cover the floor

Initially, on the floor it is better to make a rigid screed from mixtures based on porous materials, such as expanded clay. On such a basis it is possible to lay floorboard, laminate or linoleum.

It is better to take a grooved floorboard, since after wintering it can lead. As mentioned earlier, the laminate is taken only waterproof. But the most practical and easy to install, is considered to be linoleum.

Tip: in a beautifully finished dacha, it is pleasant not only to relax in the summer, but also to celebrate the winter holidays. So that the holiday is not overshadowed by a sudden blackout, it is better to purchase a generator or use such a useful service as renting a diesel generator for a summer residence.

The video in this article shows some points of the arrangement.

Let's talk today about how it is better to sheathe a country house from the outside - consider beautiful, warm and inexpensive solutions.

Wooden houses, traditionally, were familiar in our country, counting hundreds of years of tradition of construction and repair. Today, they are once again regaining their popularity, combining the desired comfort and designer beauty. However, with all its advantages, a wooden house is not without certain disadvantages - in the form of fire resistance and susceptibility to fungus. After construction, the shrinkage of the house can be up to 6%. During this period, especially in case of imperfect construction, it is highly recommended to consider additional cladding.

The main goals of sheathing a country house outside:

Improve the fire resistance of the house, resistance to chemical factors and pests.
Warming, protection of the house from exposure to drafts.
Improvement appearance the buildings.

To achieve this effect, usually the choice is made in favor of refractory materials with low hygroscopicity and thermal conductivity. When insulating, foam plastic, mineral wool are common, siding is in demand among decorative materials, heat-insulating plaster, wooden lining, block house and facade brick.

External insulation of the house with polystyrene foam and mineral wool

The most common materials for exterior cladding of houses are polystyrene and mineral wool. The undoubted advantage of working with foam is ease of use, the most affordable price. Although there are much more disadvantages - in terms of its vapor permeability, it is 10 times inferior to mineral wool. Therefore, when working with polystyrene foam, you need to properly consider the ventilation system. The wood under this material may begin to rot, as it does not allow air to pass through. Such savings can lead to additional expenses in a few years.

Exterior timber cladding

Wooden paneling includes lining, block house, imitation of timber. The materials themselves differ in terms of appearance and cost. At the same time, they are environmentally friendly, with effective absorption of street noise, providing high thermal insulation of the room and a natural design effect.

Exterior cladding of a wooden house with siding

Siding can be made from vinyl or metal. The vinyl version is less durable, but also much lighter than the metal counterpart, more reliable against corrosion. It does not need painting - the appropriate dye is introduced at the production stage.

Siding is sold in the form of panels, characterized by simplicity and ease of installation, if necessary, easily removed. Work can be carried out in all weather conditions, with the exception of a very hot season.

The choice of finishing materials for the exterior cladding of the house is really great. Should be done suitable choice taking into account their financial capabilities, features of the house, climatic and weather conditions. If you do not have special experience in construction and repair work We recommend that you consult with a specialist in the industry.