Summer shower from polycarbonate can be made with your own hands. This material is quite light and correct operation It has long term services. Polycarbonate can be transparent or matte, and it also has a bright color.
Tall building, metal frame With arched roof, protect from the wind and retain heat.
The bright color of this shower will draw attention. The shape is determined by the frame.
The brown color of polycarbonate gives the impression of a mirror finish.
For the construction of a simple rectangular shower, you still need a frame, for the rigidity of the finished product.
White matte material will hide from prying eyes.
The metal profile frame helps hold the water tank and allows you to attach walls and shower doors.
A double shower with a dressing room will save the situation in a large family.
A round shower cabin is possible from a polymer, as it bends beautifully.
If transparent material confuses, you can install additional screens inside.
You can use opaque polycarbonate for the walls of the shower, and make the roof transparent for lighting and heating by the sun.
10 ideas - what to make a summer shower in the country
Shower - one of the important buildings in the country. First of all, a shower will save you from hot weather and can refresh you at any time if the water is not hot. Secondly: sanitation, because in the country they mainly work in the ground and it is almost impossible not to get dirty. Everyone makes a shower in the country as best he can and from what he can, in this article you can get acquainted with the best ideas from Internet users.
The easiest option is to make from boards, it is advisable to paint them for durability and natural beauty.
They also often make a shower out of polycarbonate - quite cheap material and easy to handle.
The cheapest and fastest option is made of polyethylene, but it will not last long.
You can also make a shower from the remnants of plastic after repair.
It will serve you for a long time - a brick shower.
It will come out very beautifully from transparent polycarbonate.
You can quickly make a shower out of corrugated board, but this material is not cheap.
A couple of bars and boards, and a shower with ventilation is ready.
How about this option? They took empty glass bottles and poured just a solution, but it turned out - a masterpiece!
Well, another very durable shower - made of wild stone.
Summer shower from a metal profile: 10 best ideas + photos
Any cottage or a private house are equipped with cabins for a summer shower, it is convenient, practical, economical. Today's market offers a lot of materials for the manufacture of showers. outdoor booths. Consider a summer shower from a metal profile at 10 the best photos ideas.
Great spacious metal shower.
A corrugated shower, the owner even managed to tie a bush to the cabin wall, which provided the plant with impromptu watering.
Spacious cabin made of green corrugated board.
Reliable, excellent design from a profile and a professional flooring.
Cheerful shower from a yellow professional flooring for a summer residence and a private house.
Excellent capacious shower cubicle and a barrel for heating water.
Capacious shower cubicle made of corrugated board with a wooden floor.
You can safely enter the next shower, it is ready, just grab rubber slippers.
The finished product of the shower from corrugated board, it remains to be delivered to its destination.
A corrugated shower with ready-made hooks and plastic shelves.
Walking shower. TOP 8 popular models
Summer has come again - it's time to think about fully equipping a trip out of town, to nature, for such an event you need not only skewers with barbecue, but it is important not to forget all kinds of insect repellents, and the opportunity to relax in nature like at home - which means a camp shower. Let's imagine the top 8 popular models of a portable shower, which is also heated by the rays of the sun.
The camping shower below looks like a black plastic bag. It is black in color to attract the sun's warm rays.
next model camp shower made of translucent material, with comfortable plastic handle for transfer.
Super shower, with an organized canvas tent.
Comfortable outdoor shower, also for washing hands and products. It is simple in operation.
Summer shower in the form of a backpack-bag, convenient to carry and use.
With the help of such a summer portable shower, you can also redeem your beloved pet.
11 liter, mega capacious shower, perfect for outdoor recreation.
outdoor portable shower, perfect solution for camping.
Do-it-yourself polycarbonate summer shower: 10 ideas for your dacha
It's great to have a shower in the country, especially in the summer when it's hot. To make your shower quality and not expensive in terms of material costs - use polycarbonate. It is easy to process, durable and affordable.
Shower in the form of a fungus and with a good door.
Polycarbonate comes in a variety of colors, such as a shower made of red material.
Here is the matte white.
Then they decided not to spend money on the door and made it from polycarbonate itself.
Bright and beautiful shower made of pink material.
Such a shower will be difficult to make for beginners, but the shower looks very modern and beautiful.
A simple shower, but the neighbors will see you in it.
A larger size, in this you can ask for a backrest.
Here is such a cylindrical and pretty shower came out.
In this work, the material was darkened and it turned out well.
Summer shower and brick toilet under one roof. 10 photos
Summer is a hot time. During the period of sunshine and hot air, it is very important to freshen up, take a breath of fresh air. Such a task is quite feasible - it is necessary to build a shower, and with it a brick toilet under one roof. We present below 10 photos of such construction, easily feasible, if available suburban area.
A simple building that performs an important task. 
Shower and toilet made of brick under one roof, amenities with the comfort of nature.
An excellent solution for a suburban area.
Stone building of a bathroom in the fresh air.
The foundation and foundation of the future bathroom in nature has been laid.
Separate bathroom under one brick roof.
Convenient conditions, the construction of a bathroom made of bricks.
Brick, mortar, roof, that's the amenities.
The building is old, but a small reconstruction is possible and everything is ready.
Bathroom, shower, everything you need to relax, brick construction.
Agree, it's nice after a hard day to freshen up under a stream of warm water. And this means that you can’t do without a summer shower in the country.
This was taken into account by the manufacturers, offering the consumer wide choose variety of summer shower designs made from different materials. A summer shower made of polycarbonate is beginning to enjoy special demand today.
Advantages:
- simplicity and high speed of installation;
- the ability to install independently;
- low cost of materials;
- ease of construction;
- the ability to make a capital or portable shower;
- reliability and durability of the structure;
- the ability to provide water heating;
- wide choice of design and color scale.
With all these advantages, making a summer shower with your own hands from start to finish is not at all difficult. This does not require any special knowledge or a professional tool. It is enough to prepare the material. A this instruction for the installation of a summer shower made of polycarbonate will help you do the job efficiently, reliably and taking into account many nuances.
Selection Tips
1. shower location:
- shower should be located near the house. But at the same time, take into account the influence of the water drainage system on the foundation of nearby buildings;
- it is advisable to think over the water supply system. To do this, it must be equipped close to the water supply;
- it is important to ensure the drainage of water. To do this, it is better to place the shower on some hill;
- shower should organically fit into overall design site;
- it is advisable to place the shower where the sun will shine longer to ensure that the water is heated. If you plan to heat water, this recommendation can be neglected.
2. frame material
Perfect for making a frame metallic profile and tree. However, metal will last you much longer.
- the profile must be primed and painted;
- the tree must be treated with antifungal and waterproofing solutions, then periodically painted.
3. water tank
- it should be flat. So you will have a large area heated;
- it is desirable that it be dark. The sun's rays will in this case better heat the water;
- tank weight. The tank is installed on the roof of the shower, and its parameters can have a devastating effect on the frame.
- volume of the tank. The larger the water tank, the more thoughtful the drain system should be;
4. shower size
It is logical to assume that the dimensions of the frame should be determined by the largest of its users. But nonetheless:
- recommended dimensions - at least 1,000 x 1,000 mm. If you plan to equip the locker room - the size can be reduced;
- dimensions should be sufficient so that an adult can bend down;
- shower height must be at least 2,000 mm. So that an adult can freely raise his hands.
As a material for arranging the floor for a summer shower, you can choose:
- wooden shield. The most common option. The presence of cracks will ensure the drainage of water. It is cheap, equipping it quickly and simply from improvised means. On such a floor it is pleasant to stand with bare feet. However, due to the gaps in the shower, it can blow cold air;
Sometimes a wooden shield is replaced with an MDF pallet, in which holes are drilled at a distance of 10-15 cm. But, MDF deforms very quickly under the influence of moisture.
- concrete. In this case, it is important to ensure the drainage of water. Concrete is more durable, but still there is a need for additional arrangement of the floor.
- pallet. You can purchase a shower tray and install it in your outdoor shower. However, the cost leads to higher construction costs. Therefore, this method is the least common.
If it is planned to equip a separate locker room, a threshold should be provided. This will prevent water from running out of the shower.
6. Exterior material
As such a material, lining, plastic, siding, moisture-resistant plywood or even a simple film can be used.
But, today we will talk about what advantages polycarbonate creates.
- cheapness and availability;
- the ability to choose a color and create a stylish shower;
- ease;
- strength;
- flexibility;
- good thermal insulation. Especially for cellular polycarbonate;
- resistance to temperature changes - temperature range - -40 ° C - +100 ° C;
- UV protection;
- moisture resistance.
The only disadvantage of polycarbonate as a material for sheathing a summer shower is its transparency. But by opting for matte or colored cellular polycarbonate, you can solve this problem.
Technical Tips:
1.on water supply.
Water can be supplied to the tank using a pump or from central water supply. To control the water level, you should install a valve that can shut off the water.
2. for water heating.
- natural heating. To do this, you need to place the tank in a sunny place;
- electric heating. Installing a water heater will allow you to quickly heat the water. This method is used in cases where the shower - capital construction or the number of shower users is so high that there is not enough water heated during the day. Then it is advisable to provide two compartments for water - cold and hot.
3. for water drainage
There are three ways to drain water from the shower:
Directly under the bottom of the shower drainage system. Suitable only in cases where the shower is rarely used, and little water is used;
To equip the drainage system, you need to remove the sod to a height of 500-600 mm. Fill the bottom with rubble, and top with sand.
If a wooden shield is used as a pallet, water will pass through the cracks and into the drainage system.
If a concrete pallet - then it must be built with a slope towards drainage, to drain water in the right direction.
- V drain hole. The pit should be dug at a distance of 3-4 m. otherwise, constant dampness will negatively affect the durability of the shower. The volume of the pit should be at least twice as large as the volume of the water tank.
- into the central sewer.
More popular for country showers is the second method.
4. for the arrangement of the foundation.
In order for the pallet and frame to be firmly installed, the foundation should be equipped. After all, when the soil is soaked, it can float, and the whole structure will lose stability over time.
5. lighting.
During daylight hours there is no need for electricity. Cellular polycarbonate transmits light well. But, if you are planning a capital shower made of polycarbonate, electrical wiring should be carried out in accordance with all the rules, because. high humidity in the shower.
6. for ventilation.
Ventilation gaps will help prevent condensation. They can be done from below and closed with a grate or in a wall closer to the ceiling. To do this, you need to drill a hole in polycarbonate and cover it with perforated tape. Otherwise, dust and moisture will get into it, and this will reduce the performance of the material.
How to build a summer shower from polycarbonate - 10 steps to the result.
1 step. We make a drawing. We put everything on it the right dimensions and mark the location of the tank. An example of a drawing in the photo.
2 step. Calculation of corners for the frame.
For the frame, you can take profile pipe 20x20, but it is better to give preference to a 50x50 pipe. The choice depends on the wind load in the region, the weight of the water tank, the weight of the finishing material.
For the frame shown in the diagram, we need
- vertical racks with a height of 2,200 - 6 pcs.;
- horizontal supports with a height of 1,500 (750+750) - 6 pcs.;
- horizontal side supports 1 200 - 4 pcs.;
- for oblique supports 2 320 - 4 pcs.;
- for oblique supports 2 500 - 2 pcs.
3 step. Arrangement of drainage or foundation with a drain
4 step. Rack installation.
Vertical racks for a stationary frame are dug into the ground with a depth of 400-500 mm. To give the soul greater stability, the racks can be concreted. If the framework wooden rack you need to cover with an antiseptic and wrap with roofing material.
Mounting methods are as follows
Weld by welding;
Fasten using couplings;
Bolt
With the help of corners
Since after installation you get a frame consisting only of rectangles, it needs to be strengthened. To do this, we turn the rectangles into triangles. And we fix the oblique supports (in the drawing they are highlighted in red). With these supports, the frame will be able to support the weight of the tank filled with water. The approximate weight of the tank is 150 kg.
You can install not oblique supports, but horizontal ones. However, with oblique design will be stronger. And the wind load resistance will be higher.
5 step. Installation roofing material. It is carried out depending on the material used. If the roof is not provided, this step is skipped.
6 step. Tank installation.
The tank must be installed so that the load it creates is distributed evenly over the frame supports. According to the instructions, a sprayer and a tap are mounted in it. On the roof, it is desirable to fix the tank so that it is not blown away by strong winds.
7 step. Wall decoration with polycarbonate. Installation instructions for polycarbonate are provided by the material manufacturer.
8 step. Floor arrangement. Depending on the chosen floor - wood, concrete or pallet, the arrangement methods will be different. They are listed above.
9 step. Door installation. The door can be made of polycarbonate or be a film curtain.
10 step. Decoration. Attaching hooks, locks and shelves also milestone in the arrangement of a summer shower made of polycarbonate.
Conclusion
We hope that the tips given here will help you create a reliable, comfortable, practical and beautiful summer shower made of polycarbonate with your own hands. You can buy cellular polycarbonate on our website at a very reasonable price.
A shower in the country is an essential attribute of comfort and a great opportunity to freshen up after horticultural work. However, not every owner of a house in the lap of nature can boast of a comfortable shower cabin that gives a powerful boost of vivacity and positive energy. However, if this problem is familiar to you firsthand, you should not despair - the matter is fixable. And it will help modern material- polycarbonate and helpful information on this topic.
Polycarbonate shower room: features
Before talking about building a shower from polycarbonate with your own hands, you need to figure out what kind of material it is and what are its features?
Polycarbonate - polymer plastic, which has a unique structure. Polycarbonate sheets are made from granules through extrusion. This provides thermoplasticity and the ability to restore the original properties when solidified (regardless of how many times they were melted). But this is not the only advantage of the material. The list of advantages is more than impressive.
- ease. Cellular polycarbonate is 6 times lighter than glass, which allows you to create interesting designs that weigh almost nothing;
- strength. The molecular structure guarantees high impact resistance. Sheets are able to withstand impressive weight and wind loads;
- sound and heat insulation. Thanks to the air that fills the internal voids, sound and thermal insulation characteristics of this synthetic polymer are on high level;
- flexibility. The plasticity of the sheets makes it possible to erect structures of complex geometric shapes;
- wide temperature range. Polycarbonate withstand temperature regime from +120 to -40 degrees.
Complementing the list of advantages are ease of installation, low maintenance, resistance to impact chemical substances and precipitation, safety.
How to build a polycarbonate shower?
If you want to build a country shower from polycarbonate, then you can realize your dream in two ways. The first is a light summer shower with a small water tank. The second is a more solid structure with a foundation and heating.
The location of the booth is also important. It should be reliably protected from the wind, it’s good if the area is warmed up by the sun’s rays - in the evening of a hot day you can swim in warm, pleasant water. To organize a good runoff, choose a place on a hill.
We are developing a project
The first step towards the realization of what is desired, namely, a shower for giving from polycarbonate, is a project. Incredibly, even an elementary schematic drawing can facilitate the construction of a building.
The shower cabin should not be cramped. The best option- when even the tallest member of the family can freely bend down and raise his hands.
It is important!
Most often, the dimensions of the washing room are 1 m2, the height is 2.5 meters. Whereas for a locker room, a room of 1x0.6 m is quite enough.
The constituent elements of the structure are an individual moment. But the most popular option is a booth, drain and a stationary water barrel. By the way, when developing a project, consider the source of water and the place of discharge. Ideally, if the drain is located near the waste pit.
Fitting out a shower stall
We mark the territory and install a columnar foundation. At the corners of the resulting rectangle we drive in wooden pillars. Pre-treat them with a moisture-repellent solution and an antiseptic. We assemble the metal frame, fastening the individual parts with long bolts. Inside the frame, a dressing is made, which will serve as the basis for the floor.
Between bearing pillars mowings are laid, and logs on them. For an unhindered exit of water into the drainage, make the floor with holes - lay the logs at short intervals. The only thing is that taking a shower with such a floor in cool weather will not be very pleasant due to the air flow from below.
You can build the floor so that the water passes through a special tube into the drain. Don't forget about rational use water resources - water after taking a shower, you can water the garden.
If you have chosen a design with a dressing room, then to separate the two spaces, you need to build a threshold. This will prevent water from entering the locker room and soaking clothes. Take Special attention door designs. It should close pretty tightly. Most the best option- door with overlay seal. Heat will be securely retained inside the booth, and the sash will not wedge from moisture.
Summer shower: we use not only in summer
If you insulate the cabin, then a polycarbonate summer shower can be used not only in summer. Expanded polystyrene is used as a heater, which fills the frame compartments. The plates are covered with a film that protects against moisture and steam.
If desired, you can decorate the booth with PVC panels, washable wallpaper, linoleum, oilcloth. The choice depends solely on your preferences and capabilities. The only condition is that the materials must be moisture resistant. A stapler is used for fastening.
It is important!
For construction, it is better to purchase polycarbonate with a thickness of 8-16 mm. The walls are made of matte, and the roof is made of cellular (transparent) polycarbonate.
A water tank is installed on the roof, heated by the sun's rays. Due to the tightness of the booth, maintaining a constant temperature is not a problem.
Choosing a tank
As already noted, the tank is installed on the roof. Previously, water had to be collected by hand, but today the situation is different. Water is supplied directly from the water supply or pumped. The plumbing valve stops the flow when the tank is full.
As for the material and shape, the barrel can be cylindrical, flat, made of both plastic and metal. Plastic flat tanks are especially convenient. They are easy to transport, mount and remove. Only a shower with such a tank will have to be covered for the winter.
Metal barrels are bulky and heavy and require annual plumbing maintenance. The water in them heats up longer, but also cools down more slowly, which is also important.
How to heat water?
One sun for effective heating of water is often not enough. To increase the heating rate, a "greenhouse" is mounted under the tank. The uncomplicated design of polyethylene and rails increases the water temperature by 10 degrees.
An increase in this indicator is also facilitated by a sheet of foil or a mirror installed on the north side. Do not forget that warm water is always on top, so do not be too lazy to supply the container with a float. Warm water will be used first, and cool water will rise and warm up.
If the plans include the operation of the shower in the winter, then drastic measures are needed. The role of the heater can be a large boiler or heating element from washing machine. In the first case, the tank must be divided into 2 zones: for cold and hot water.
It is important!
It will take an hour and a half to heat 50 liters and a water heater with a capacity of at least 2 kW.
Observe safety precautions. Isolate the wiring and use wire of the correct size.
Making a drain
A sewer pit is, of course, convenient, but not practical. Water should go first into a small depression, and then into a compost pit. Next to the drain are a drain and a septic tank. It is forbidden to place them under the shower cabin - water will flow into the septic tank, bad smell. Please note that the volume compost pit should be twice the capacity of the water tank.
Do not forget about the waterproof layer. It can be a concrete slope, hydrostekloizol, roofing material, film.
Why is a polycarbonate shower good?
The work is completed, and you are the happy owner of a comfortable shower cabin, consisting of some pluses. A polycarbonate shower is not only durable, but also aesthetic, hygienic, not afraid of direct sun rays and temperature fluctuations. In a word, a dream.
Execution options can be varied. Choose the one that matches your ideas about the perfect island of coolness and vivacity. Watch the video below and enjoy dacha life and maximum comfort anytime, anywhere!
Polycrabonate summer shower: video
An outdoor shower is an essential attribute of almost any suburban area. It makes it possible to "wash away the dirt" after working on garden plot Or just cool off on a hot summer day. As a rule, summer shower designs are characterized by maximum simplicity and uncomplicatedness. For the walls of the shower cabin, the owners often use the material that, as they say, "was at hand." It can be slate, plywood, thin sheet iron, and even ordinary boards. But today, with the advent of new construction technologies there is no need to show unnecessary “construction ingenuity”. Construction supermarkets offer excellent, durable and, most importantly, inexpensive material for the construction of a summer shower - polycarbonate. So, we are building a summer shower from polycarbonate.
A few words about polycarbonate
Before proceeding directly to the description of the construction technology of a polycarbonate summer shower, we briefly consider the main properties and characteristics of this material.
Polycarbonate is a polymeric synthetic material, the sheets of which can be either solid or honeycomb (that is, containing voids).
An example of cellular polycarbonate sheets
Polycarbonate is highly resistant to temperature extremes, has sufficient strength, but it is easy to bend and cut, does not need painting and requires minimal personal care. In addition, polycarbonate sheets are very light, which makes it possible to work with them without problems even for one person without assistants. If we add to all of the above the rather low cost of polycarbonate, it becomes clear that this is one of the best materials for building a summer shower today.
Choosing a place for a summer shower
First of all, it is necessary to determine the place of installation of the future shower. When choosing it, you need to consider several points:
- The shower must be located in a place where the sun hits for most of the day, otherwise the water will not warm up to the desired temperature;
- It is better to build a shower on a hill, or at least on the edge of a slope, so that the water used during washing leaves evenly, and does not accumulate in one place;
- And, finally, it is desirable to place an outdoor shower in a place protected from wind and drafts.
Having decided on the place of construction, you can begin to create a project for your summer shower.
Project development
Today it is not a problem to find a suitable summer shower project on the Internet. But, nevertheless, we will introduce you to the basics of designing a summer shower project.
The summer shower consists of a water tank, a shower cabin and a tray. All other "bells and whistles", such as a locker room or a water heating system, are optional and are done solely at the request of the owner.
Schematic representation of the frame of the future shower cabin
Project development begins with the creation of even the most simple and schematic representation frame of the future shower cabin.
Because we make showers out of polycarbonate, best material for the frame will be metal pipes with a diameter of 40-60 mm.
On the plan, it is imperative to provide for horizontal jumpers between the corner posts, as well as supports for the water tank or barrel and pallet.
When the schematic plan is ready, it is necessary to calculate the required amount of materials. To do this, we will apply dimensions to our drawing. Of course, they can be anything, but based on practice, we recommend that you adhere to the following parameters:
- The height of the shower cabin is 2.5 meters;
- Width meter by meter;
- If you plan to make a locker room, then its width can be 0.8 by 1 meter;
- The height of the corner posts is calculated using the formula "height of the shower cabin plus 0.5 meters";
- The width of the supports for the water tank and the pallet is calculated based on their design.
After the dimensions are plotted, armed with a calculator, you can calculate the required number of pipes to build the frame of the shower cabin.
Please note that thicker pipes (60 mm) must be used for the bearing racks and supports of the pallet and tank, while thinner pipes are also suitable for horizontal lintels.
Thanks to fittings, you can forget about welding
Beyond the definition required amount pipes, the drawing makes it possible to calculate the number of fittings required for mounting the frame.
It's special connecting elements, with which you can assemble the shower frame without using welding, which will undoubtedly greatly simplify the work.
When the project is ready and everything necessary materials bought, you can proceed directly to the construction of a summer shower.
Frame installation
First of all, it is necessary, in accordance with the drawing, to cut the pipe into pieces of the required length.
The installation of the frame begins with the installation of corner support posts or (in the case of using connecting fittings) their lower segments. To do this, four recesses with a diameter of 30-40 centimeters are made in the ground at the corners of the future structure. After installing the supports in them, they must be filled with a mixture of crushed stone and cement-based mortar. Exactly these " concrete bases and will become the foundation of the future soul.
Only after the cement has completely dried (after at least 48 hours), you can proceed with the installation of the frame.
If you use connecting fittings, then the frame is mounted from the bottom up, according to the principle of a simple children's constructor. If you use welding, then, on the contrary, you need to start from the upper perimeter, then install the supports under the tank, then the lower perimeter, the supports for the pallet and finally the horizontal jumpers.
When the frame is ready, it remains to fix it on one of the racks door hinges and hang the door frame on them, after which it remains to paint all the elements of the frame with waterproof paint.
Installation of polycarbonate sheets
The next step in the construction of a summer shower is the installation of polycarbonate sheets on the frame. Do
it's simple enough.
First of all, you need to cut the polycarbonate into sheets of the desired size.
For the walls and doors of the shower, of course, you need to use opaque or matte polycarbonate.
You can cut polycarbonate with almost anything: a jigsaw, a hacksaw
or with an ordinary knife for cutting linoleum.
To fasten the prepared sheets, it is necessary to use special self-tapping screws with plastic thermal washers.
A plastic thermal washer is ideal for fixing prepared sheets
Video about attaching polycarbonate to a metal profile
You can learn more about the technology of fastening polycarbonate with self-tapping screws from the following video:
Hooks for clothes and shelves for shower accessories are best attached not to polycarbonate, but to horizontal pipes supporting frame.
Water tank installation
The water tank is installed on the roof of the cab
The water tank is installed on the roof of the shower cabin. You can use ordinary plastic or metal barrel, but it is better to purchase a special plastic tank for a summer shower.
Such tanks are already equipped with all the necessary fittings for attaching a shower head and, in addition, they are usually painted black, which contributes to faster heating of water.
The tank is installed on pre-prepared supports and practically does not require additional fastening. But for reinsurance, you can throw one or two fixing clamps made of metal or plastic tape through it.
In order for the water in the tank to heat up faster and retain its temperature longer, a special cap can be built above it - a greenhouse. To do this, you can use a sheet of transparent polycarbonate, which is simply bent along pre-installed guides so that it forms a kind of dome above the tank. The edges of the dome are attached to the upper lintels of the frame using the same self-tapping screws with thermal washers.
After installing the tank, it is enough to fix the shower head on it and bring the hose to fill it with water.
After the tank is installed, it remains to fix the shower head with a stopcock on it and connect the hose to fill the tank with water.
Pallet installation
The final stage in the construction of a polycarbonate summer shower is the installation of a pallet. You can use a ready-made metal or plastic pallet for this purpose, or you can use well-planed boards. It will be both useful and pleasant to stand barefoot on such a pallet. Another advantage of a wooden pallet is that it can not be mounted on a frame, but simply laid on the ground.
A finished summer shower looks something like this
If you are making a pallet from boards, do not forget to leave small gaps between them, through which the used water will leave.
On this, the construction of a summer shower made of polycarbonate can be considered complete. And if you have already filled the tank with water, you have only one thing to do - enjoy a cool shower after a fruitful day at work. Good luck with your repair and "enjoy your bath"!
Taking a shower in the summer heat in the country is a great excuse to relax and unwind after work. Do-it-yourself shower cabins are quite popular today among owners of suburban areas. A building created according to a simple scheme will be functional and attractive. A polycarbonate shower with a dressing room can be made with a wooden or metal frame.
Material Features
Polycarbonate is a material that belongs to the category of polymers. Sheets are made from extruded granules. The material is issued in sheets. They can be cellular or solid (monolithic). In the first case, the sheet has voids. Polycarbonate has many unique characteristics that make it popular.
Among the advantages of polycarbonate are:
- High strength. Thanks to a certain manufacturing technology, polycarbonate has acquired high mechanical strength. This property allows the sheets of material to withstand strong gusts of wind. Also, polycarbonate is able to withstand snow loads.
- Small mass. Due to its lightness, polycarbonate is quite easy to install. It weighs 6 times less than glass.
- Flexibility. The use of sheets of material in the arrangement of the shower allows you to create cabins of various shapes.
- Temperature resistant. Polycarbonate withstands temperatures from -40 to +120 degrees.
- Sound and heat insulation polycarbonate sheets is at a high level. Such properties are provided by the presence of honeycombs in the thickness of the material.
- Safety. Even if the sheet is subjected to strong blow, small fragments will not work. This is the main advantage of polycarbonate over glass.
In addition, the material is not exposed to various aggressive environments. When installing a shower, the sheets are quite easy to install, as well as process and operate.
shower device
Before you build a polycarbonate shower to give your own hands, you should choose the shape of the cabin. This will make the cutting process easier. The easiest option is to install a polycarbonate shower in which a water tank will be placed. This option is chosen if you need to freshen up in extreme heat. You can also build a capital shower, which will be equipped with water heating.
When choosing a place where a shower will be installed, it is worth considering wind load and the presence of a shadow. It is also worth considering the flow of water. It is better if a country shower made of polycarbonate is installed on a hill.
Projecting a soul
Design is a very important stage in the construction of a shower in the country. However, it is often missed. It is important to draw up even the simplest drawing, which will later help to do the job correctly.
Shower design features:
Shower cubicle equipment
When erecting country shower there are several features that should be taken into account that will help make it as strong and durable as possible. Also, the advice of experienced professionals will ensure the rapid construction of the structure.
General tips to consider when arranging a shower:
- Before building a cabin, you should carefully select a place and mark the site. Pillars must be installed at the corners of the marked area. Before this, the tree is treated with an antiseptic. You should also impregnate the elements of the booth with a water-repellent composition.
- The next step involves assembling the metal frame of the shower. Cabin parts can be purchased at ready-made. Fasten them with long bolts. An overlap is installed on the lower part of the frame, which will become the basis for the floor covering.
- Logs must be mounted at such a distance to ensure the strength of the shower floor. IN flooring gaps should be made between the boards. This is necessary for the rapid drainage of water. To prevent cold air from blowing in from below on cool days, it is worth making a drain into the pipe. So that the water that has been used does not go to waste, it can be used to water the beds.
- If the shower design takes into account the presence of other compartments, at the entrance to washing department it is worth installing a threshold. Such a measure will prevent water from entering the locker room.
- The door is an important part of the structure. It should be made of such materials that it does not swell. It is also worth properly installing the seal. This solution will prevent heat leakage from the cabin.
Such tips will help make the shower comfortable and durable.
All season shower
The shower cabin in the country has one feature - it can be modified as much as you like. For example, if it is properly insulated, the operation of the shower can be carried out in autumn period. Often, polystyrene foam is used for insulation. It is mounted between two walls. To prevent moisture from getting on the insulation, it should be covered with a special film.
From the inside, the shower can be finished according to your own taste preferences. Usually, PVC panels are mounted on the walls, as well as oilcloth or linoleum. It is important to choose not only moisture resistant, but also wear-resistant material.
Do-it-yourself polycarbonate shower is built quickly and effortlessly. The walls must be made colored, and the roof must be transparent.
Choosing a water tank
To use the shower for a certain period of time, it is worth installing a tank of the required volume on the roof of the structure. It should be selected taking into account the expected water consumption and the number of people who will receive water procedures. Usually choose metal or plastic tanks. The water in them is heated by heat from the sun.
The tank is usually cylindrical or flat. The last option is optimal for a country shower. It is fairly easy to install and carry. The only drawback of such a container is the need to cover in winter.
A metal water tank is much more difficult to install. It is also quite difficult to transport. This is due to the large weight of the product. Also, a metal tank requires regular care. The advantage of such a container is that the water heats up faster and keeps the temperature better.
Water heating
There are several ways to heat water in a shower tank. Often solar energy enough to prepare warm water for washing several people. However, on cloudy days or in autumn it is worth cold weather. To make the water warmer, you can build a kind of greenhouse in which the tank will be placed. Thanks to this solution, the temperature of the liquid will rise by 10 degrees. To build a greenhouse, it is enough to stretch a plastic film on rails.
There are other ways:
- A mirror or foil is used to warm the water. If you place them on the north side, they will reflect the rays of the sun onto the water tank.
- For capital construction, you will need to install a water heater. As such a device, you can use a heating element. In this case, the water tank should be divided into 2 compartments. The second will be filled cold water. In order to heat 50 liters of water in 2 hours, a 2 kW heater must be used.
Such methods of heating water are quite simple and effective.
Draining
Drainage of water in the case of a dacha cooperative is carried out by simply bringing the drain to an existing sewer. The problem appears in the case of water intake from the well. In this case, you will have to think over the scheme of the drain equipment in accordance with the characteristics of the site.
As you can see, making polycarbonate showers with your own hands is quite simple. You should decide on the sequence of actions and have before your eyes precise drawing future construction. This will create a durable and reliable shower stall in which you can freshen up on a hot summer day.
Also, such designs are highly practical and affordable. Each owner can build a shower for a summer residence from polycarbonate sheets personal plot. The materials are quite cheap, and even a beginner will master the construction technology.
