Many steam lovers dream of having a good, but inexpensive, private bathhouse. A place where you can wash, relax, and get a good boost of energy. One of the available and budget options- do-it-yourself frame bath: step-by-step instruction construction will reveal secrets frame technology, will become an example for independent construction from the foundation to correct selection thermal insulation materials.
Having the skill of assembling frame structures, you can quite simply and quickly with your own hands
Before building a frame bathhouse with your own hands, many people ask themselves: what material to use for its construction? After all, many associate baths with structures made of logs or bricks. But such buildings are quite expensive for their owners, and the time required to warm up, for example, a chopped bathhouse is about 6 hours.
Advantages of frame technology
Construction frame bath solves several problems at once, as it: simple technique construction, availability of materials used and fast speed of construction. The advantages of frame technology include the following:
- the most affordable construction cost;
- use of lightweight types of foundation;
- low thermal conductivity of the structure contributes to rapid heating;
- the possibility of carrying out communications inside the walls, which has a positive effect on the aesthetic component of the bathhouse structure;
- the absence of shrinkage makes it possible to operate the bathhouse immediately after its construction and finishing;
- use of environmentally friendly materials;
- there is no need to use special construction equipment;
- no special construction skills required self-construction frame bath. Videos posted online demonstrate this perfectly;
- the absence of wet construction cycles makes it possible to carry out construction regardless of air temperature and water availability;
- many ways to decorate a building.
All these advantages contribute to the increasing popularity of frame baths. Reviews from owners who used this technology during construction indicate that such structures are economical and, if constructed correctly, can create excellent conditions for comfortable use.
Weaknesses of frame baths, reviews from owners
To weigh the pros and cons of the frame bath construction technology, you can ask for reviews from the owners. There is a lot of information on Internet forums from those who already have such a bathhouse and have been using it for some time. Some leave negative reviews: frame baths, in their opinion, tend to quickly lose appearance due to the formation of fungus on the walls. This occurs due to the rapid cooling of the room, no matter how well it is insulated.
This drawback can be eliminated by using only high-quality insulation materials for thermal insulation. It is necessary to approach the choice of thermal insulation material with all seriousness. After all, cheap polystyrene foam or mineral wool will not perform their functions properly. The use of economy class foam can cause a fire in the structure due to the easy flammability of the insulation.
One of the negative aspects described in the reviews is the shrinkage of the bath. Many testify that over time (approximately within 1.5-2 years) frame construction gives shrinkage, the value of which reaches 8-10 cm. This, in turn, can cause deformation of the internal and external finishing of the building.
Helpful advice! To minimize the effects of shrinkage of a frame bath, lumber that has been kiln-dried should be used during construction.
Summarizing the above, we can conclude that the main disadvantages are the significant costs of insulating the walls of a frame bath, the need for thorough antiseptic treatment and low fire resistance. However, given the huge list of advantages, the construction of frame baths is not inferior in popularity to structures made of logs or bricks.
You can get acquainted with some of the assembly nuances and reviews from the owners by watching a video of building a frame bathhouse with your own hands.
DIY frame bath projects. Photos of the best buildings
Getting acquainted with photos and videos of frame baths with their own hands, many decide to self-construction structures. Having some experience in construction and taking into account the good practice of constructing objects using frame technology, you can build such a bathhouse quite quickly. However, as in any construction, to avoid serious mistakes, a competent project is necessary.
Projects, photos of do-it-yourself frame baths 3x4, 4x4 m
When building a 3x4 m frame bathhouse with your own hands, you must take into account that the space inside the room should be used as ergonomically as possible. Such mini-baths can be built on small dacha or area with country house where there is a need to save territory. No more than two people can indulge in bath procedures here.
Before you can build a frame bathhouse quickly and inexpensively, you need to have a ready-made project that you can use as a guide during construction. In principle, a bathhouse can consist of one room, which will combine a steam room, shower and locker room. This is not entirely convenient, since getting dressed after taking procedures in a room with high temperature air and high humidity are not very comfortable.
Typical designs for 3x4 m frame baths provide layouts where separate rooms are allocated for a steam room, a wash room and a relaxation room. Heating of such a bath can be done with one wood stove or a boiler. Drawings of a frame bath can also take into account the presence of a modest veranda.
Do-it-yourself construction of 4x4 or 3x4 frame baths, due to their small size, has its advantages:
- decent savings on building materials - if the length of the wall of the structure is 3 m, a six-meter beam is cut in half and there is practically no waste left;
- speed of construction - having a design and drawing of a frame bath available, it is possible to erect the structure within 2 weeks;
- strength and durability - given that a minimum of materials is required, you don’t have to skimp on the quality of wood and choose a high-quality material with good impregnation.
Helpful advice! Any new building on your site, even a small bathhouse, is subject to mandatory registration in the cadastral register.
A review of photos of frame baths of a small area will help you get acquainted with the projects and choose an option to your liking.
Projects of 6x6 frame baths with an attic
If you are the owner of a large plot of land, it makes sense to build a beautiful and spacious bathhouse. You can steam in it yourself and invite friends - there is enough space for everyone. In projects of frame baths with an attic, a layout has been developed where the rest room, as a rule, occupies up to 20 square meters. m. In the same room there is a staircase leading to attic floor, which is usually used as a bedroom.
Many users post online photos of the stages of building a frame bathhouse with their own hands. Photo reports will help you visually familiarize yourself with the nuances of independent construction.
Insulation scheme for a frame bath
One of the important points in assembling a frame bath is its thermal insulation. Both the selection of material and its installation should be approached with all responsibility. Mineral wool can be used as insulation. This material is characterized by high vapor permeability, it is non-flammable and walls with such insulation “breathe”. This achieves the effect of a log bath.
You can lay mineral fiber formed into slabs or rolls, but it is preferable to use the first option. Insulation boards are laid between the racks. If the sheets in the corners of the frame niche are deformed and do not fit tightly, it is necessary to straighten the sheets using a knife. The insulation must be in close contact with the wooden frame elements around the entire perimeter, as well as with each other.
Helpful advice! Experts recommend insulating a frame bath with two layers of 5 cm each: the first layer is made of insulation in slabs, the second is made of roll material. Thus, all connecting lines will be blocked.
Between the insulation boards and outer skin The frame is covered with a layer of waterproofing. For this you can use, for example, Tektoten film. The fact is that during operation, the open insulation is partially blown through the ventilation gap, which leads to a decrease in the thickness of the insulation and its deterioration. thermal insulation properties. Laying wind-waterproofing protection from a vapor-permeable membrane will guarantee the effectiveness of the thermal insulation layer.
WITH inside arrange a vapor barrier from polyethylene aluminum foil. The joints of the film are glued with tape, after which the interior finishing begins. The process of insulating the frame is quite labor-intensive and requires careful execution. If the technology is not maintained, mineral wool may shrink over time, which will affect the thermal insulation parameters of the entire structure.
The video below will demonstrate in more detail the technology of structural insulation during the construction of a frame bath.
Roof arrangement
For small baths will do gable or hipped roof shape. Easier to implement - gable. The rafter system of such a roof is made from wooden beams 15x5 cm. For convenience and safety, all structural elements should be assembled on the ground. To avoid errors during assembly, it is recommended to make a layout, the shape of which will be repeated by all rafter elements.
In order to make a model, you need to connect the upper ends of the two rafters with a nail. The lower edges of the rafter legs are placed and secured at the points where the supports are planned. The resulting figure is secured with a transverse jumper - a crossbar. The crossbar is connected to the rafter legs using screws.
When all the roof trusses have been assembled, they begin installing them on site. The first step is to fix the front elements, between which a construction cord is pulled for reference. Its location will coincide with the line of the roof ridge. The remaining elements are mounted at its level. The pitch between trusses is usually 1.2 m, although it can be changed up or down.
Helpful advice! When taking the step of the rafter legs, it is necessary to take into account the location of the chimney. It should be centered between the rafters.
When installing each roof trusses, you should check the verticality of the installation using a plumb line. If there are deviations from the vertical, it is necessary to level their position using a lining under rafter leg pieces of board of appropriate thickness. Next, they arrange the sheathing. If as roofing Ondulin or another will be used soft material, the distance between the elements of the sheathing should be no more than 1 cm.
The roof is insulated using the materials used to insulate the frame. The roof is covered roofing material. The ridge is protected with a corner made of galvanized sheet or a factory-made element.
Floor construction and finishing
The peculiarity of bathhouse floors is that their design can be different depending on the purpose of the room in which they are installed. In rooms that are in direct contact with water, a pouring floor is installed. Its design consists of a flooring made of boards, between which gaps are left to allow drainage to pass into the ground. There is no need to insulate such floors.
The construction of the floor of a frame bath begins with laying the logs. If the distance between support points is more than 3 m, it is recommended to erect support columns. In places where the lags come into contact with the strip base and posts, waterproofing from several layers of roofing material is used. Boards are mounted on the joists.
Helpful advice! In order to be able to dry the flooded floor, its floorboards are not fixed to the joists.
The boards in the poured floor structure are placed with a gap of 3 to 4 mm. The interval should also be between the flooring line and the bath wall (about 2 cm). If the soil under the building is sandy, you can limit yourself to filling a 25 cm layer of gravel. The distance from the surface of the gravel to the subfloor should be 10-12 cm. If the soil is clayey, it is necessary to build a tray from which water will be directed to the drainage pit.
For recreation rooms, a floor with a “non-leakage” structure is installed. Its installation begins with a subfloor made of two rows of boards. A continuous flooring of pine boards. At first they are simply baited. And only when all the interior finishing work is completed and the room is properly dried, the floor boards are finally adjusted and completely fixed.
It should be noted that the floorboards should be located with a slope towards the point where wastewater is collected and discharged into the sewer. A hole is made at the lowest point of the wooden flooring and connected to drain siphon. A non-leakage floor requires insulation, which is placed in front of the finishing coating.
Video: do-it-yourself frame baths from foundation to roof
For those who are faced with the construction of a frame bath for the first time, it is very important not only to familiarize themselves with the step-by-step installation instructions, but also to get a visual representation of all stages of construction. On the Internet you can find dozens of training videos on how to build a frame bathhouse with your own hands. Video materials contain a lot useful information and can become a kind of guideline in the production of work.
By studying the video instructions, you can learn about the installation features and types of foundation for the construction of a bathhouse, as well as the advisability of using one or another type of foundation. Here you can get answers to all the questions that arise regarding piping, installation of the frame, roofing and equipping the bathhouse with one or another heating equipment.
Watching video tutorials will help you learn useful recommendations regarding the use of insulation material and its installation. After all, the main thing for a bathhouse is heat, which must be retained inside the structure. Professional advice will help you correctly distribute and install insulation depending on the seasonal use of the bathhouse, which will affect the durability and appearance of the structure.
Many videos are devoted to the finishing section of a frame bath. Here are the advantages and disadvantages various materials for decoration. Consultations experienced craftsmen will reveal the features and operational properties each type of material. It would also be useful practical advice from those who built and use their own frame bathhouse.
Although construction using frame technology is not particularly complicated, it is worth familiarizing yourself with the basic recommendations. Some videos contain information about the most common mistakes when building a bathhouse. Reviewing the material will help you avoid them in the future. This will guarantee the rapid construction of a reliable and durable structure.
A good bathhouse is not only a source of physical health, but also improves the morale of visitors. This is facilitated by interior design premises, well-designed room designs and the use of modern building materials.
The first projects of bathhouses with an attic were created for wooden houses. Eco-friendly material has a considerable number of advantages. Nowadays, projects of frame baths with an attic or a project of a bath with an attic and a terrace made of brick or foam blocks are also popular.
The relevance of the construction of the building
A bathhouse with an attic and a veranda, the projects of which are presented on our website, allows you to significantly save space on personal plot. The presence of a second floor allows you to add additional space, which you can use at your discretion. Therefore, these buildings are relevant for those who have a significant shortage of space.
Most often, the room is used as a guest room, a relaxation area, a billiard room, or sports equipment is placed in it. Even construction companies include log bathhouse projects with an attic in their list of proposals. They are offered in several standardized versions.
During compilation own project For baths made of timber or brick with an attic, you should pay attention to some factors:
- often the design of a 6x6 bathhouse with an attic may include windows built into the roof; this solution provides the space with a large amount of light and reduces the cost of installing additional ventilation;
- the room provides space for a staircase, which is made of wood or metal; to save heat, it is often installed directly from the steam room;
- the shape of the roof is used in a broken form in order to make maximum use of the usable space under it; steep side slopes are combined with vertical, strict gables;
- since the room is characterized high humidity and significant temperature changes, it is necessary to provide high-quality thermal insulation and waterproofing in the design of a bathhouse with a 6x4 or 6x8 attic.
Fulfilling these conditions will ensure the most comfortable result.
Modern construction technologies allow the construction of mobile baths that can literally be transported from place to place. Their advantages and operating features can be seen in the video.
VIDEO: The most cheap sauna turnkey transportable mobile saunas made of timber
Compact dimensions 6x4 m
It is generally accepted that a 4x6 bathhouse project with an attic (photo below) is the most popular option for implementation in small areas. The building turns out to be compact, but the functionality is not reduced. This footage is enough for a small family to take full advantage of it.
The first floor contains the following rooms:
- steam room;
- shower or washing area;
- pre-bath rest room;
- small veranda.
The veranda area is usually filled with chairs, benches and dining table. This open space creates an atmosphere of simplicity and naturalness. However, it can be sacrificed to expand the useful internal space by increasing one of the built-in rooms.
The attic is used as a bedroom, recreation room or even a storage room. In the latter case, a cozy corner is equipped on the ground floor, combined with the hallway.
When drawing up projects for wooden baths with an attic, the ceiling height in the rooms is 2-2.5 m to ensure comfortable use.
Designing a 6x6 bath
One of the most popular from a practical point of view is the design of a 6x6 bathhouse with an attic made of timber. Thanks to additional meters area results in a significant increase in usable space. This allows you to expand the room layout options to satisfy all the desires of the bathhouse owners.
In addition to the usual premises for a bath, such as a washing room, steam room or dressing room, in this case you can also place a small pool inside. It is installed as a built-in structure in the floor or as an additional container above the floor level.
The resulting terrace becomes more spacious, which is important for the summer period. If you plan to use the bathhouse frequently in winter, then the terrace can be reduced.
Construction stages
You can independently implement any project from a 6 by 6 bathhouse with an attic to a 6 by 9 bathhouse project with an attic. You just need to stock up on enough materials and choose the right site for construction.
The sequential construction algorithm consists of the following steps:
- The area is cleared and the foundation is installed, which is selected based on the load: either strip or pile-screw.
- The base is covered with a waterproofing coating. To do this, rolls of roofing felt are used, on which the logs of the lower trim are laid. A layer of floor joists is sewn on top of such a durable array. Next, the log house is placed.
- One of the costly items in the design of a bath house with an attic is the installation of metal tiles. A double sheathing with mandatory insulation is formed under it. A double layer of overlapping roofing material is also laid on top.
- They crash ceiling beams, and the ceiling is installed.
- Wooden log house must be caulked and winnowed from the inside and outside.
- Since in the process of heating the baths an open fire is used, everything wooden elements must be impregnated with several layers of fire-resistant antiseptic. The outside is covered with two layers of façade varnish to protect it from moisture.
- A floating type piping is carried out and, according to the design, bathhouses made of rounded logs with an attic are mounted on their own metal frames.
- The next step is the installation of floors. A layer of expanded clay is often used to insulate them.
- Wooden wall It is enough to sand the inside well and they may not need to be processed anymore.
- At the final stages of implementing the project for a log bathhouse with an attic, the installation of window and door blocks is carried out.
- The steam room is reliably insulated and the ladder is installed in the place prepared for it.
Application of frame technology
There are successful implementations frame projects baths 6x8 m with attic. In this case, the role of the supporting structure is performed by a wooden skeleton made of timber. Installation of the racks is carried out on the lower trim at a given equal interval of 0.6-0.8 m.
The selection of timber dimensions for the frame is calculated based on the expected size of the future insulation.
The base drains at the corners are used in the form of 100x100 mm timber, and for intermediate drains it will be sufficient to install 100x50 mm racks. Thermal insulating layer made of modern materials It will be much better to keep the internal temperature of the room in a comfortable range, since the thermal conductivity of such materials is significantly lower than that of wood.
External cladding buildings is carried out using OSP sheets. This material It was specially developed for such conditions. Popular heat insulators in such projects of bathhouses with an attic (photos are on the page) are mineral wool and expanded polystyrene. The intermediate gaps between them are filled with polyurethane foam.
With open terrace
Some craftsmen prefer to seal cracks with dry moss, tow or flax. With all the advantages of these natural materials they have a number of significant disadvantages. The first is drying out. Over time, moss and tow dry out and decrease in size, as a result of which drafts and moist air begin to penetrate through the cracks. Second - this is the favorite raw material construction material for birds. Already during the first 5 years they take it away for their own nests, which, of course, also does not add to the tightness of the bathhouse. By the best means modern inter-crown insulation materials are used for sealing cracks, in particular, Polytherm or Consil - latex sealant.
One of the advantages of frame models is wide choose By exterior decoration. They are covered with siding, all types of tiles, clapboard or block house. Conduct external treatment frame structure can be done immediately, but for a log house you will need to wait 1 year for shrinkage. Even if the bathhouse will be built on pile foundation, you will still need to wait at least 12 months for complete and uniform shrinkage of the entire structure.
VIDEO: Project of a bathhouse with an attic 6x6 m
A bathhouse is a trump card at any dacha, in a private courtyard or country house. Even those who don’t go to steam regularly, but consider such a pastime more like a vacation, agree: having your own bathhouse is great. In addition, building it with your own hands is not as difficult as it seems at first glance, thanks to modern methods and materials. A classic log house will require certain skills to assemble, but a frame wooden sauna it will look no worse in the yard, and you can build it with your own hands in just a few days.
Content
We design a 6x6 bathhouse with an attic: layout
The first thing you should take care of before starting all work and purchasing materials is preparing a project for the future building. Ideally, you should turn to specialists for this, since professionals will quickly draw up a project that will have a number of advantages over a homemade one:
- the long service life of the bathhouse is ensured by qualified calculations of the load on the frame;
- correct selection of materials depending on their weight and performance properties;
- professional drawing up of estimates (avoid over-expenditure of material, but you won’t have to buy more);
- hassle-free registration of the bathhouse in cadastral documents;
- increase in the price of a house/cottage together with a bathhouse upon sale.
You can order professional documentation from bureaus and companies that deal with frame buildings, or when purchasing a ready-made set of materials for a bath the right size. In the latter case, you will immediately have everything you need to start assembling.
Note! It is not at all necessary to choose only from finished projects available at specific bureaus. Specialists can draw up a project for a 6 by 6 bathhouse with or without an attic, taking into account all your requirements. Deviations from the standard plan, of course, will affect the price of the project, but the result will please you for many years.
In principle, a project only sounds so official, but in reality you can simply plan the premises so that during the construction process there is no desire to redo everything or replace the already purchased material with another. Important point in frame construction - correctly calculate the load on supporting structure. If you can do this, then you can certainly handle the rest of the design aspects.
If you decide to make your own calculations, keep in mind that:
- the load on the ground from such a bathhouse is small, so the foundation is made of a shallow strip foundation;
- bath frame with in a fast way installation in standard projects is assembled in increments of 95-100 centimeters;
- the main material for assembly is a board 15x5 or timber 10x10 or 10x5 centimeters;
Note! At independent choice wood for construction, carefully check its moisture content. Wood with a moisture content of more than 20% is highly likely to suffer during use, and the deformations can be so severe that a complete replacement of the material will be required.
- the layout of a 6x6 bathhouse with an attic should take into account the placement of a steam room, washing department, locker rooms and dressing room on the ground floor;
- the size of the washing and steam compartments depends on the expected number of vacationers;
- the sink, steam room and dressing room are separated frame partitions from the main material of the bath + insulation and vapor barrier;
- safety requirements require that the heater be placed not in a steam room or sink, but in a dressing room;
- access to the attic is made from the dressing room;
- If desired, you can place a terrace or veranda in the attic.
How to assemble a 6x6 m frame bathhouse with an attic with your own hands
The easiest way to do this is if you purchased a ready-made “constructor”. In this case, each element has already been selected and measured by professionals, and very precise step-by-step instructions are included with the entire kit.
If the building is to be completed from start to finish with your own hands, then after completing the project and choosing a place for construction, you can begin preparing all the necessary materials.
You will need:
- edged board 50x120;
- square standard timber 120x120;
- unedged board and timber for sheathing;
- timber 40x75;
- clapboard, siding or other lightweight finishing material for walls;
- cement mortar;
- roofing material;
- roofing felt;
- mineral wool;
- expanded clay;
- fasteners.
Let's take a step-by-step look at the process of assembling a 6x6 meter frame bath:
Step 1. Prepare the place. The allocated area is leveled and marked for construction.
Step 2. A foundation is installed along the perimeter of the marking belt type. It should be remembered that it must pass both under external walls, and under load-bearing partitions.
Step 3. A frame is assembled from beams, rafters and translations (four frames in total). The frames are attached to the harness near the ground above the waterproofing layer.
Step 4. Wall components are attached to the treated and dried frame using anchor bolts.
Step 5. Polyurethane foam it is necessary to insulate all emerging joints to avoid blowing through the building.
Step 6. Erected on the frame rafter system and sheathing.
Step 7. Plates (for example, OSB) are mounted to the sheathing, on which thermal insulation is laid.
Step 8. The roof is attached to the rafters.
Step 9. All internal partitions are installed.
Step 10. The partition near the stove must be lined with heat-resistant bricks.
Step 11. Interior finishing: mineral wool and vapor barrier are laid in the walls and they are covered with clapboard; Expanded clay is poured onto the floor and a vapor barrier is laid, after which the floor is also covered with boards.
Step 12: Perform if necessary external finishing bathhouses with siding or clapboard.
After the 6 by 6 meter frame bath has been assembled, you can begin decorating the interior, installing equipment, and testing out the results of your labor.
Foundation: support-column surface made of concrete blocks height 400 mm(block 200x200x400 mm), on a reinforced concrete slab (400x400 mm) and a sand base. The waterproofing of the blocks is roofing felt. Corner pillars from blocks in a dressing (for 1 pillar - 4 blocks). Tying on blocks of timber 150x100mm.
Walls: frame 125 mm thick; bottom harness- strapping on a foundation made of timber. The top trim is made of boards 40x100 mm. Racks made of boards 40x100 with a pitch of 600 mm, Knauf insulation 100 mm thick, vapor barrier in 2 layers. External wall cladding with clapboard (imitation timber), interior lining clapboard walls.
Attic: frame, made of boards 100x40 mm with a pitch of 600 mm, covered with clapboard on the room side, clapboard on the street side (imitation timber). Attic insulation“Knauf” 100 mm thick, with a vapor barrier.
Partitions of the 1st floor: lower piping - piping on a foundation made of timber. The top frame is made of 40x100 boards. Intermediate racks made of 40x100 boards with a pitch of 600 mm, Knauf insulation 100 mm thick, vapor barrier in 2 layers. Covering the partitions on both sides with clapboard.
Attic gables: frame 112 mm thick from 100x40 mm boards with a pitch of 600 mm, cladding on the street side with clapboard (imitation timber) with a vapor barrier in 1 layer.
Outdoor and interior decoration: external lining of chamber drying (imitation timber) wide (110x12.5 mm), internal lining of chamber drying (88x12.5 mm).
Steam room: The walls and ceiling are covered with class A clapboard (linden) with foil gasket, the canopy is made of linden.
Internal height of premises: 1st floor: 2.3 m, attic: 2.2 m.
Floors: logs from boards 150x50 mm with a pitch of 600 mm. The subfloor is made of edged boards with a thickness of 20-22 mm along the cranial bars. Floor insulation "Knauf" 100 mm thick. Flooring - floor board 26-28 mm thick, on the veranda the flooring is made of “deck” boards without tongue and groove, mounted with a gap. Antiseptic joist, subfloor, and bottom trim.
Floors: the ceiling of the 1st floor of the bathhouse is made of boards 150x50 mm with a pitch of 600 mm, the ceiling is lined with clapboard with Knauf insulation 100 mm thick with a vapor barrier in 2 layers.
Rafter part, sheathing: the rafter part is made of boards 100x40 mm with a pitch of 600 mm, the sheathing is sparsely made of edged boards with a thickness of 20-22 mm.
Roof covering: Ondulin (color to choose from: red, green, brown). Roof lining with platband with a gap for ventilation.
Window blocks: PVC, single glazing.
Door blocks: interior - solid wooden, the door to the steam room is made of linden, Entrance door metal with a lock.
Stairs to the attic: steps, fencing, handrail made of planed boards.
Bath equipment: wood-burning in the steam room oven "Rus 18L" with a screen for stones or a water tank (to choose from), on the firebox side - brickwork. In the attic container for water 80 liters with electric heating element and thermostat. Shower tray with shower head and shower connections. Perimeter shower tray finished with PVC panels.
Electrical: RCD, automatic devices, panel, switches, sockets, sockets, lampshades, wires, boxes.
Delivery: to the customer’s site (up to 100 km) from the production base of Master LLC: Moscow region, s. Zavorovo. Unloading and assembly and installation works.
Classical 6x6 bathhouse with attic with an excellent layout at an inexpensive price - the dream of any person who owns land plot. Therefore, many lovers of country holidays buy themselves an excellent Russian bathhouse right next to the cottage. The layout of this bathhouse includes a toilet.
The company offers its customers to buy classic Russian baths of any size, with or without decoration. Timber baths turnkey from the company SK Domostroy - this is the best that can be found on the market country house construction to date. According to the price/quality ratio of buildings from SK Domostroy
Why are 6x6 bathhouse projects with turnkey attics from SK Domostroy so cheap?
Do not think that the price is inexpensive 6x6 bathhouse project with attic indicates that they are of poor quality or assembled in violation of technology.
Such a low price is due to the fact that SK Domostroy has its own sawmill. This allows you to reduce the price to very low values. As practice shows, the cost of a bathhouse at SK Domostroy is 15% lower than that of its closest competitors.
In addition, the assembly of log houses is carried out by teams of professional craftsmen who can cope with work of any complexity in the shortest possible time.
