DIY folding picnic tables. Two ways to make a folding table with your own hands

Folding furniture is very relevant for modern city apartments, because it allows you to save free space and does not lose its functionality. The dining table is an integral attribute of any home. It should be large enough to seat the whole family and also accommodate guests. In the case of lunch, the option will come in handy sliding table. When folded, it can be a small table for everyday use or just a nightstand.

Of course, a collapsible table can be purchased at furniture stores or order, but this is quite expensive and can cause serious damage to the family budget. Why not do folding table with your own hands? Despite the fact that its mechanism is not easy, any man can still make such a piece of furniture. The main thing is desire and a little patience.

We decided to make kitchen table with your own hands? We advise you to take a closer look at the option of a folding bed. Such dinner table fits perfectly into the interior of a city apartment and does not take up much space. Its mechanism, despite its apparent complexity, is very simple. The only thing that is really worth paying attention to is the manufacturing of parts.

Before you make a book table with your own hands, as in any other case of creation homemade furniture, prepare a drawing.

A homemade folding table consists of the following parts:

A - tabletop, 700x670 mm (recommended material thickness - 20 mm, it can be MDF,
Chipboard or hollow panels, at your discretion), 2 pcs.;
B - lid, 700x200 mm (the material is the same as that used for countertops), 1 pc.;
B - leg, 720x200 mm (tabletop material), 2 pcs.;
G - drawer, 638x190 mm (tabletop material), 1 pc.;
D - bottom shelf, 628x190 (tabletop material), 1 pc.;
E, F - horizontal and vertical bars, 500x40x25 mm, E - 4 pcs., F - 2 pcs.;
Z - movable leg, 720x40x25 mm, 2 pcs.;
And - piano hinges, 4 pcs.

Who among us doesn’t like to go fishing with family or friends, have a picnic, barbecue, or just relax in nature.

However, in addition to fishing rods, food, barbecue and tents, you need at least some kind of camp furniture - it’s uncomfortable to cook and sit on the bare ground.

And the main item needed for a picnic outside the city is a folding table.

Now it can be purchased at any tourist or fishing store, but why spend money if you can make a folding table yourself. Let's find out how to do this and what is needed for this.

Design Features

Without going into details, we can distinguish two types of camping tables – a table with folding legs and a suitcase table.

In the first option, when transporting or carrying the legs are retracted under the tabletop. Upon arrival, you just need to move the legs of the table to place it.

In the second option, the tabletop is like a suitcase or a chessboard - in the stowed position the legs lie inside it, but in place they must be taken out of the “suitcase”, connected to it and the table placed in the right place.

Both types have their advantages. A folding table is easier to make and literally takes seconds to set up. At the same time, the suitcase table is more convenient to carry and takes up less space, and, in addition, you can put dishes, skewers and other necessary things in it during transportation.

Wood, plastic or metal?

What material is best for making your own folding table for camping trips?

If ease of creation is your top priority and you don't have a wide range of tools or skills in working with plastics and metals, choose wood.

Timber, boards, chipboard, plywood - all this can be used to create a fairly simple folding table.

But a table made of wood, if its surface is not protected with varnishes and special coatings, will warp under the influence of dampness, sunlight and temperature changes and lose its attractive appearance.

Plastic and even metal can be used as material for legs and table tops. But here you may need those tools that cannot be found in every home. In addition, working with such materials is more difficult than with the same wood. But tables made of plastic are not subject to corrosion, and those made of metal are very strong and durable.

In order to make a collapsible or folding table, you need a set of enough simple tools, which can be found in any home or garage:

Jigsaw (can be replaced with a circular saw or wood hacksaw);
Electric drill for preparing holes for screws;
Hammer and Phillips screwdriver;
Tape measure, square, ruler, pencil and level.

Attention! remember, that cutting tools tools such as a circular saw or jigsaw are sources of increased danger! Observe all necessary safety precautions when working.

Folding picnic table

To make something simple and strong enough, you need the bare minimum of materials and fasteners:

wooden boards, 20–40 millimeters thick. For the countertop, instead of boards, you can use a sheet of chipboard or plywood, approximately 10 millimeters thick;
self-tapping screws, furniture bolts, and for each pair of legs the bolts must be of different lengths, wing nuts for the bolts;
door handles for carrying the table and hooks.

First, cut from boards or sheets Chipboard table top required sizes. If the tabletop is made up of several boards, assemble them together, lay them down and measure the length and width.

Stages of work

Step 1. Making the frame
Lay the boards for the frame on the tabletop; on each side, the frame should move 2–3 centimeters away from the edge of the tabletop. Using a jigsaw, cut the boards to the required dimensions, then lay them back on the tabletop, checking that the length and width of the frame match the drawing. Outline the contours of the frame - use them to make holes in the tabletop for screws.

Important! In order to accurately maintain the dimensions of paired parts, connect the boards together with clamps and cut them together with a jigsaw or hacksaw.

Step 2. Intermediate bars
Cut out the support bars on which the spread out table legs will rest, and make four holes in them for screws. To prevent the table legs from colliding with each other when folding, make wooden supports for the second pair of legs, which will be located between the frame and the stop bars.

Step 3. Assembling the frame and tabletop
Assemble the frame elements together, secure the stop bars and wooden supports, and use an electric drill to make four holes for the bolts. Use screws to secure the table top and frame.

Step 4: Table Legs
Lay out and cut out the table legs with a jigsaw. In the upper part, where they are fixed to the frame, the legs should be rounded, while in the lower part there should be a cut at a slight angle (15–20 degrees). Make holes for the bolts.

Step 5. Assembling the table
Connect the first pair of legs with a crossbar and secure to the frame with a bolt and wing nut. Repeat the same with the second pair. Check that the legs do not cling to each other when unfolding and folding the table. If they get stuck, treat the legs at the point of friction with sandpaper.

The folding table is ready. Additionally, you can attach a handle to it for easy carrying and hooks for hanging towels or barbecue equipment.

Suitcase table

To make a camping suitcase table, you will need more materials and fasteners:

sheet of plywood or chipboard for the lid. If they are not available, you can use boards;
wooden beam for the legs and frame of the table top;
hinges, door or suitcase handle, two latches;
furniture bolts and wing nuts;
Self-adhesive screws.

Stages of work

Step 1. Take chipboard sheets, cut out halves of the tabletop. Then saw off the frame bars to the required length and connect them to the tabletop halves with screws on all sides. Fasten the tabletop halves together using hinges.

Step 2. Cut four beams, which will be the legs of our table, make holes in them and in the frame for bolts, and make an indent so that the table legs are freely connected to the frame.

Step 3. Connect the legs and frame using furniture bolts and wing nuts.

Step 4. Attach a carrying handle to the frame. Don't forget to make two latches , so that the suitcase does not open during transportation.

Note! Before you start work, draw up a drawing of your table in several projections, calculate the dimensions of all the parts and how much material you will need. This way you will save yourself from mistakes, and you will not have to redo all the work again.

Protecting the camp table

A tree that is not protected by anything ages quickly enough: dampness, temperature changes that are inevitable in nature, sunlight and many other factors have a bad effect on the material and reduce the durability of the folding table.

Therefore, do not forget to treat all its surfaces, especially the countertop, which is most susceptible to harmful influences.

Use special antiseptic compounds and stain.

A final finish with varnish or paint will improve the appearance of the plywood or chipboard and make the camp table more beautiful.

How to make another version of a lightweight folding table, watch the video:

A folding table can have a variety of designs, and the choice is not limited to the material, shape of the table top and method of attaching the legs. In addition, there are design options of different types according to the assembly method.

The table can have large or compact dimensions, while all parameters are determined by its intended purpose. However, the simpler the design of the folding table, the easier it is to make it yourself.

Overview of options

A table of a similar structure is used, as a rule, in a small room, in nature, in a country house, or in buildings under construction. But this is not all the areas of application, since if desired and if such a need arises, a folding table can be taken with you on the road anywhere. This, perhaps, is the main advantage of this type of furniture.

Other advantages:

compact dimensions, even if the table takes up a lot of space when unfolded, after assembly you can fit this structure in any nook so that it does not interfere with movement around the room;
unusual design, since the design of such pieces of furniture differs significantly from standard analogues;
light weight, making it easy to transport;
folding tables are usually quite easy to make yourself.

There are many versions of similar designs. The main and most popular versions:

Tabletops have different shapes: square, round, rectangular, oval.
By material: metal, wood, combined.
The table may also differ in the way it is folded. So, one of the options is with cross-shaped legs, as a result the dimensions of the structure when folded change, but the table itself cannot be disassembled. Another type is completely collapsible to get ready product threaded fasteners are used.

There are other versions that are more convenient to transport (table-suitcase), however, they are much more difficult to make with your own hands.

Drawing up a diagram

First you need to evaluate your own capabilities. If you don’t have much experience, it is recommended to choose the following design:

We will make the simplest version of a folding table

Depending on the dimensions, this folding piece of furniture can serve as a dining table; it is also used when camping, fishing, etc.

For the tabletop we use laminated pine

This means you need to decide for what purpose such a table is being prepared. As a result, a diagram with arbitrary dimensions will look like this:

Layout of legs and crossbars

The specified dimensions can be changed at your own request. But this should be done in accordance with the level of load exerted on the structure, and as proportionally as possible.

Tools, materials for work

Available means are selected based on what material will be taken as a basis: wood, chipboard, aluminum. IN living conditions It’s easier to make a wooden table with your own hands. It would be better if the tabletop is made of chipboard.

Set of tools:

jigsaw;
building level;
paint brushes;
roulette;
screwdriver;
sandpaper or sander.

The last of the tools is best used only if you have experience. And application sandpaper will significantly slow down the manufacturing process. As for materials, it all depends on the dimensions of the structure.

For example, in accordance with the above sketch, you will need 20x45 mm bars. If you plan to make the folding table larger, you need to use 30x50 mm. The length of purchased bars can be different: 1.2 m; 5 m.

All the same, you will have to cut them with your own hands in accordance with the dimensions according to the sketch. The board for the table top is taken of the required thickness. For large structures, an option up to 40 mm thick is suitable.

Assembly

First it is cut out required amount bars with a small margin in size.

The hole diameters should be slightly more sizes fastening elements, for example, for M4 screws/bolts, holes with a diameter of 5 mm are prepared. After cutting, all parts are processed with sandpaper/sander. Next, you need to open them with a protective compound, for example, wood varnish.

Putting it together support legs and drill a hole for the fastener

The first thing you need to do is secure the footrests with your own hands; there are 4 of them, and they are located perpendicular to the “goats” (folding structure of the legs with crossbars at the bottom). This is done using self-tapping screws (3 pieces per support).

They are attached to each other using a bolt

The location of these elements is determined by the length of the crossbars that will connect the legs. And the distance between adjacent elements should be equal to the width of the block from which the “goats” are made

First, knock down the crossbar and 2 legs; you need to prepare two such structures, and one of them should be 40 mm longer (a value equal to the total width of the two legs). All that remains is to connect these structures; for this, bolts of sufficient length are used, which are installed in the central through holes bars.

If you do not understand some operations, look at the photo. It gives an idea of general design

There is no need to tighten the bolts to ensure free rotation of the axle. “Goats” are attached to the tabletop by means of a bolted connection with pre-fixed foot supports. To prevent the axial fastening of the legs from becoming loose due to regular folding, lock nuts are used on two sections of the cross-shaped connection.

To make it even more compact when folded, you can remove the bolted connection of the footrests and the “goat”. It is enough to remove two bolts. For this reason, there is no need to over-tighten the fasteners in these areas.

The only thing that requires strong fastening is the footrests, since these elements provide reliable installation legs If you make the tabletop not from wood, but from a lighter material, such as chipboard, the finished table will have less weight, which will make it easier to transport.

The garden folding table looks organically in the shade of trees summer cottage, under a canopy or in a gazebo, while making your stay comfortable and convenient. A huge advantage of this design is its compactness when folded and the special warmth that comes from things made with your own hands. Anyone can make a folding table for a summer house, especially since the work process does not require any specific tools, and the material for the structure can be purchased at any construction market.

DIY folding table. Photo

DIY folding picnic table. Step by step photos

Before you start assembling a folding table, you should remember that half the success lies in using quality materials . The timber and board must have as few knots as possible, and cracks and delamination of the wood are not allowed. In addition to lumber, you will need fasteners, hinges, and means to protect lumber from exposure to the atmosphere.

Materials needed to make a table

To make a folding table, you need to have on hand:

timber measuring 45×45 mm - 8 pcs. 730 mm long - for making legs;
slats 45x20 mm: 2 x 550 mm and 2 x 950 mm - for assembling the upper frame of the table, as well as 2 x 350 mm - for the folding part;
plywood slats 40×27 mm for supports - 3 x 450 mm;
18 mm plywood with dimensions: - 985x585 - sheet for the tabletop; - 2 sheets 985x530 for folding parts; - 1 sheet 885x481 mm for the shelf;
rail 440×40 mm as a cross member;
2 slats 450x40 mm for side support elements;
4 loops 60×34 mm for fastening table covers;
4 loops 80x41 mm for folding legs;
screws made of galvanized or stainless steel;
metal dowels for mounting shelves.

When cutting workpieces, try to ensure that the corners of all parts and their ends have right angles. To do this, use a carpenter's square, and if it is missing, you can use an angle sheet material factory cutting.

DIY folding table drawings. Photo

Assembly instructions

Before you start assembling a folding table with your own hands, you need to prepare timber parts for installation. To do this, a groove up to 20 mm wide and deep to the middle of the workpiece (22.5 mm) is cut out on each frame part. The same distance is measured from the edge to the groove - 30-40 mm.

Step-by-step photo of how to make a folding picnic table

After all the grooves have been cut, drill holes for connecting parts together, as well as attaching legs.

To avoid distortion of the frame when making a folding table with your own hands, make a cross cuts, which will include the corners of the frame during installation. This process can be examined in more detail in the presented figures.

Properly prepared parts are the key to high-quality assembly, so it is advisable to use quality equipment- good circular saw, drill, set of chisels and other carpentry tools.

Assembling the upper frame underframes(common name for tabletop frame). To do this, the slats are assembled into a groove and fixed furniture confirmations(screws for hex key);

Installed on the assembled frame support legs, combining the sawn parts with the frame slats.

At the corners of the plywood shelf they make cutouts for supports. To fix the slab, install the legs at a distance of 220 mm from the edge of the legs. metal dowels.

Retractable support elements are assembled. To do this, the remaining bars are connected in pairs with slats installed in grooves, fixing the connection points with confirmations.

Having sanded and primed the tabletop and other parts, they begin to paint the footrest, slats and tabletop.

Mount shelf spacer. The side lintels are attached to the tabletop frame. The support rails are attached to the shelf, for which holes are drilled in it. Remember that this work requires special care, since even small displacements can affect the geometry of the table.

A jumper is mounted to the table frame, after which three additional spacers are attached.

Retractable legs They are hinged and attached to the external struts.

Main and folding parts table tops screwed to the hinges.

The table cover is installed on frame, after which the middle part is fixed to the frame with self-tapping screws.

A table assembled in accordance with our instructions will have sufficient strength and reliability. The main thing is to carry out the work step by step, in the presented sequence. Processing and painting must be carried out before assembly. Otherwise, it will not be possible to carefully paint individual parts and the finished product will not look elegant and impressive enough.

DIY transformer table. Instructions

The sliding table has a durable, stable design, and even a beginner can handle its assembly. When folded, the dimensions of the tabletop are 1200x700 mm. After sliding the table top apart, a special insert is installed into the resulting opening, resulting in a tabletop length of 1670 mm. This makes it possible to additionally place two adults at the table.

Tools and materials

Before going to the construction market, write down what parts and materials you will need to assemble a table with a sliding top:

laminated Chipboard thickness 25 mm;
PVC strip for gluing edges up to 2 mm thick;
aluminum corners measuring 50×50 mm - 4 pcs. 500 mm each;
telescopic guides for drawers length 500 mm - 2 pcs.;
furniture legs with a diameter of more than 60 mm - 4 pcs. length 710 mm;
latch lock for the drawer - 6 pcs.;
10mm M4 threaded screws;
furniture screws 16×3 mm and 20×4 mm.

To work, you need to prepare the following equipment and tools:

milling cutter;
electric jigsaw with a set of saws for plywood and chipboard (fine teeth);
circular saw;
electric drill and set of drills;
screwdriver or set of screwdrivers;
building hair dryer or iron;
wallpaper knife;
bubble level;
clamps;
measuring tool, pencil.

Before you start cutting the material, make a drawing of the table according to your dimensions or use the design we propose. In this case, the dimensions components tabletop covers are indicated on the provided drawings.

Table transformer. Blueprints

Instructions for making a folding table

Stage 1. Do marking sheet material, then cut out tabletop parts from laminated chipboard - an insert measuring 700x470 mm, as well as two halves of the table top measuring 700x470 mm. You can avoid chipping on the surface of the chipboard by using a jigsaw with a special file with a low-profile tooth. Additionally, you can stick masking tape at the cut site, which will prevent chipping of the facing layer.

Remember: if you plan to process workpieces with a milling cutter, be sure to make a processing allowance of at least 2 mm.

To cut the slab evenly, attach it to the workbench with clamps and level the edge. The tool should be operated slowly, constantly monitoring the quality of the cut.

Stage 2. Trimming using a router will allow you to get perfectly smooth side surfaces. This tool is also used slowly and carefully.

Stage 3. Pasting the ends of the tabletop with PVC edges. The workpiece is secured with a clamp, cut off and the edge is applied to the side surface of the slab. After this, it is heated with a hair dryer or iron and smoothed. After the material has hardened, the protruding edge of the edge is cut off with a wallpaper knife.

Stage 4. All sharp edges and corners of aluminum corners are processed.

Making a transformer table. Photo

Stage 5. At each corner, mark the middle and measure 25 mm from each edge.

Stage 6. Each side of the furniture guides is applied to the corner and the places of their attachment are marked. The corners are drilled at the designated points. To prevent the drill from sliding on the aluminum, the installation positions are cored. The corners and guides are connected with bolts.

Stage 7. Resulting guide designs lay down on a flat substrate as follows: the corners connected to the internal guides (thin) are placed inward, towards each other, and the corners to which the outer parts of the guides are attached (fixed, thicker) are placed outward. After this, 4 holes are drilled in the moving and fixed aluminum parts.

Stage 8. Both halves table tops lay down front side on a workbench or other flat surface. On top, at a distance of 80 mm from the sides of the panels, retractable guides are installed (with the movable, thin part inward). In this case, the joint between the halves of the table top should fall in the middle of each guide.

Stage 9. The fixed half of the telescopic guide They are attached to the left half of the table cover, and the movable one is attached to its right side. To do this, use 20x4 mm self-tapping screws.

Stage 10. Near sliding system install latches and hinges.

Stage 11. With the latches open, move both parts of the tabletop apart and place additional panel. After this, all elements of the table cover are shifted to form a flat, gap-free surface.

Stage 12. Additional latch loops are installed on the middle part of the tabletop. The resulting fastening will allow you to fix the table both in the open and in the assembled state.

Stage 13. The legs are attached to the tabletop using 20mm self-tapping screws.

After assembling a folding table with your own hands, be sure to check the design for strength in the extended and folded position. Only after testing can the table be considered suitable for use and installed in a permanent place.

A folding table is very convenient and indispensable in many cases. Most apartments in our country have small area, and many do not even dream of placing a large dining table in the kitchen. To solve this problem there is wide choose folding table designs. And when organizing a picnic in nature, it is optimal to take with you a small aluminum folding table, which is lightweight and folds compactly.

Variety of folding table designs

The sizes vary depending on their functionality, but in any case the folding part must be shorter than the height, otherwise it will not be able to fold. A table made by yourself can be decorated with decoupage or simply painted, not forgetting to apply several layers of varnish at the final stage.

Folding tables are used in trade, at picnics, at dachas and in apartments. They are indispensable when you need functional, but compact and lightweight tables. Depending on the place of their use, it is selected suitable material. So, for the street it is best to take aluminum construction With plastic table top. This table is moisture resistant and lightweight. Natural wood, plywood or laminated fiberboard are suitable for the house. wooden frame. But all folding tables have one drawback: you cannot stand on them. This load is too large for a folding structure.

First of all, they differ in the shape of the countertops - rectangular, round, oval or square. The most versatile tables are those with a rectangular top.

The legs are made of wood, aluminum and steel. Parallel legs make the structure less rigid, but it is comfortable to sit at such a table. And those arranged in a cross, although less convenient, provide maximum stability. In addition, there are removable and length-adjustable legs, they are especially convenient for uneven surfaces. Therefore, when choosing a table, you need to focus not only on its appearance and the size of the tabletop, but also on design features frame.

Tables made of wood or laminated fiberboard with parallel legs look beautiful. But they can only be used indoors and provided that you do not have to unfold them often.

An inexpensive table made of varnished plywood is perfect for outdoor trips. It is moisture resistant and will last for many years. To quickly and easily fold the legs should be arranged crosswise.

How to make a folding table on different cases life will be told in this article.

DIY folding picnic table

Outdoor recreation is becoming increasingly popular. It helps you relax and unwind from the bustle of the city. But even far from civilization, you want to make your time as comfortable as possible. An important attribute is a folding camp table, which has a number of advantages. Firstly, it has small dimensions and light weight, which greatly simplifies its transportation. The finished tables have a special tabletop coating that does not absorb food odors and is easy to clean. Secondly, it is made of reliable material, most often aluminum, and can be used in the harshest conditions for many years. It is convenient if there is a hole in its center for an awning, then relaxing under the hot sun will be as comfortable as possible. Today there is a large selection of folding tables for camping: for children, sets with benches or simple tables. They combine time-tested materials and modern ones, such as plastic.

Let's look at how to make a folding table with your own hands using the example of a simple and very reliable design.

It will be compact and lightweight, which will allow you to use it for different purposes: on a hike, in the garden or fishing. Below is a drawing of a folding table. If necessary, the dimensions can be changed proportionally.

First, the required number of bars is cut out with a small margin in size. The easiest way to do this is on a circular saw.

The tabletop can be made of any material, but it is better to make it from varnished plywood or wood (in the future it must be carefully coated with several layers of varnish).

All cuts of the workpieces are covered with edge tape. The bars for the legs and footrests are rounded using a jigsaw or a right angle is cut and smoothed with a grinder.

They are fastened to each other using a bolt, the length of which should not exceed 35 mm.

Having prepared all the parts, you can begin pre-assembly. First of all, the legs and supports are fastened together. After that, markings for fastenings are applied to the tabletop (it will be mounted on wood screws). Having numbered all the parts, the table is disassembled, all irregularities are sanded, and several layers are applied protective composition. That's it, it's ready for final assembly.

DIY universal folding table

For home use The most convenient mechanism is the “table-book” mechanism. It has a beautiful and noble appearance, is stable and reliable, and most importantly, it will fit behind it. a large number of Human.

Let's look at how to create such a table with your own hands.

A - tabletop 700x670x20 mm - 2 pcs. It is optimal to use hollow panels.

B - table cover 700x200x20 mm - 1 pc. The material used is wood slabs (the legs, drawers and base are also made from them).

B - leg 720x190x20 mm - 2 pcs.

G - drawer 628x120x20 mm - 1 pc.

D - underframe 628x190x20 mm - 1 pc.

E - horizontal frame beam 500x40x25 - 4 pcs.

AND - vertical beam frames 500x40x25 - 2 pcs.

Z - movable leg 720-40-25 - 2 pcs. Made from hard rocks wood

I - piano loop - 4 pcs.

Assembling the book table occurs in stages:

all cuts are processed with an edge;
First, the central part is fastened - a movable leg (W) with vertical (W) and horizontal (E) bars. All parts are connected with blind straight tenons;
Next, the tabletop is assembled, consisting of a leg (B), a drawer (D) and a base (D).
the lid (B) is attached to the ends of the table legs using round insert tenons;
the movable leg with a frame is attached to the piano hinges, having previously attached an elastic band or a metal button to its end;
After the table is completely assembled, if necessary, it is varnished.

As you can see, the whole difficulty lies only in the manufacture of parts; the assembly itself will take a little time. As a result, the price of a table made by yourself will be much lower than the market price.

Folding tourist table: features of choice

High-quality picnic furniture will allow you to comfortably enjoy outdoor recreation. Depending on the needs, there is a wide variety of both individual folding tables and entire sets of tables and benches that fold compactly.

The price of a folding picnic table depends on the materials from which it is made, its size, design and, of course, dimensions. Today there is a wide variety of folding designs, which makes the choice more difficult. In any case, when choosing it, you need to start from functionality - a small folding table designed for 1-2 people, or a large one for a whole company.

The durable steel frame and aluminum tabletop can withstand even greater loads. It is advisable that it have a protective cover.

For a small company, a very light table is best small sizes. If it will be used outdoors, then you need to choose aluminum or plastic countertops.

Regardless of whether it won't big table ic, which is intended to be transported manually, or a large table, it is important that the structure is light in weight. In the first case, there should be a convenient handle for carrying, and when choosing the second option, you should also take into account its dimensions when folded - it should easily fit into the trunk of a car.

All materials from which tables are made have their advantages and disadvantages. Thus, aluminum, although lightweight, is short-lived, steel is reliable and durable, but begins to rust over time, wood will require additional care.

When choosing a design mechanism for a folding table, you should be guided by the main rule - the simpler, the better. Although such a table will fold less compactly, it will last for many years.

The tabletop is chosen to suit your taste and preferences. The easiest and most convenient to clean -

plastic or aluminum. Appearance is also important, but should not be dominant when choosing.

Folding table photo