Choose a paint roller. How to choose the right paint roller for painting Where to use a velor paint roller

How to choose a roller for painting? Any such tool turns the boring work of decorating a room into a creative process. The rollers are made by the most different designs and sizes. When choosing a product, it is necessary to take into account the task. How painting is done with a roller, the article will tell you the tricks of using them.

The simplest roller for painting ceilings or walls is a wooden or plastic cylinder with a full-length hole, bushings are installed on its ends, in the form of washers made of copper or other material. The product is equipped with an axle with a handle.

A stop is installed at one end of the axle, a thread is cut under the nut with a washer from the other, or a cotter pin is installed. A cover or nozzle is put on and fixed on the roller. During assembly, free rotation of the cylinder around the axis must be ensured, preventing it from jumping off.

With this design:

• Performance is greatly improved.
• The shading of colors changes qualitatively.
• The compositions can be applied on any basis.
• No drops or splashes on other surfaces.
• No lint or hair remains on the layer after application.
• The coating is carried out evenly, without any traces of the cover material on the roller.

Rollers and mini-rollers are made from various materials: natural - merlushka, velor or artificial:

• Polyamide rollers all types of paints made on bases that contain solvents or water-dispersion compositions are applied. Such material is able to absorb and give paint well. It is easy to clean, does not require special care, possesses resistance to the aggressive elements which are a part of paints.

Polyamide is a fairly wear-resistant material that allows you to achieve excellent results when painting surfaces with any type of paint. Convenient pile length, thin filament structure allow you to paint uneven, rough, bumpy surfaces.

• Polyacrylic roller used for applying formulations to water based or for paintwork materials all types with a limited amount of solvents. Polyacryl has similar properties to polyamide, but with less wear resistance and poorer coating quality.

Have long term services are best suited for semi-rough surfaces, but also suitable for rough and smooth surfaces.

• Polyester roller dispersion paints, compositions for walls and ceilings are applied. Such a material with a homogeneous fiber structure has the least wear resistance.
• foam roller for painting it is used for painting surfaces with water-adhesive compositions. It is absolutely not suitable for enamels, oil paints and varnishes. This is due to the fact that the solvents included in their composition corrode the foam rubber, and pieces of material remain on the painted surface.
• Roller with fur nozzle used for enamels, varnishes and oil paints. Lamb rollers provide the most uniform paint application.
• Velours helps to get a fairly smooth surface. It is a natural or synthetic material with a homogeneous structure, with a short pile, ideal for covering smooth surfaces, allows you to create a uniform, good quality layer.
• Structural rollers are used for applying plasters and structural paints to give the surface a textured fine-grained coating.
• Pressing rubber rollers are used for smoothing. With their help, you can expel air from under the wallpaper, roll the seams, evenly distribute the glue on the surface.
• Plastic clamping products are used for rolling wallpaper seams.
• Needle roller used for perforating drywall and removing wallpaper.
• Floor paint roller. Serves for rolling the front layers of the uncured composition, for removing air or deaeration.
• Roller for decorative painting designed for applying plaster and thick paint, to obtain a relief surface (see Rollers for decorative plaster and creating a relief surface).
• Roller for painting corners, in the photo VMU, is used for internal corners.
• Paneled rollers convenient for applying panels, so as not to cut out stencils or make a special ruler.

• Roller for painting pipes, protections of balconies, ladders and other objects.

How to paint bark beetle plaster

Bark beetle plaster is one of the most popular types decorative coating. It can be used for exterior and internal surfaces. Enough simple technology painting and affordable price, combined with a spectacular appearance.

The disadvantages when staining bark beetle include:

• The presence of various recesses and bulges, complicating the coloring of the surface. It is quite difficult to paint such a relief with an ordinary roller. In this case, you will need to use manual painting with a brush.
  First, the surface is painted with a roller.

Tip: To color the bark beetle, you should choose a thicker roller.

The tool is maximally impregnated with paint, which can flow into all depressions and paint elevations.

Tip: If paint accumulates in depressions, it must be removed with a dry roller. All emerging non-painting should be tinted with a brush manually.

• When painting a bark beetle (see. Painting bark beetle plaster - all ways) in one color, the coating does not look too beautiful.
  It is better to paint the surface twice, while applying the second layer in a different color. Thus, an effective appearance. In this case, potholes and furrows will remain with the original layer, and a coating of a different color will be applied on top.

The disadvantages of the bark beetle include the difficulty of applying a two-color layer with your own hands.

To paint a surface in two colors, you must:

• Add color when mixing directly into the plaster mortar. In this case, the coating acquires the desired color during the preparation of the material. You can use ready-made colors, which you only need to mix thoroughly.
• When painting the coating, it is better to use a special roller for painting the bark beetle.. It is a little more difficult for them to paint the surface and the paint consumption is slightly higher, but with such a tool you can effectively cover all the furrows on the surface.

How to clean and store the roller after work

Quality tools are quite expensive, but they can last a long time if you take care of them properly. Before saving the roller after painting, it should be properly cleaned after use.

Instructions for cleaning the roller from water-based paint suggest:

• Prepared:

1. capacity;;
2. cleaning solution;
3. softener for all rollers that were used during operation.

• For each type of roller, the bucket is filled warm water and two cups of material softener is added to it and everything is thoroughly mixed.
• After the fabric softener dissolves, the solution breaks the tension on the surface of the water and the dye will begin to dissolve more quickly.

Tip: If necessary, the roller can be cleaned with plain water or a mild dishwashing detergent. In addition, the paint can be rolled out onto newspapers laid out on the floor, having previously removed the excess by rolling the roller with pressure in the paint tray.

• The roller is lowered into the bucket with the prepared solution for 20 seconds.
• The tool is removed from the bucket and washed under running warm water until the liquid becomes clear.
• After peeling off the paint from the roller, it must be squeezed out of the water as best as possible and put on an old, preferably terry towel. Can be used paper towels thick layer so that all the moisture can be absorbed.

To clean oil paint:

Tip: Do not use water to clean the roller, when using paint on oil based: the paint will not dissolve in water alone, it must be removed with alcohol or turpentine.

• Excess paint is removed from the roller by rolling it back and forth over old newspapers.
• Alcohol or turpentine is poured, which will serve as a solvent for the paint, into a clean dish.
• A roller with paint is lowered into the solution and rolled back and forth, as when painting.
• The tool is rolled over old newspapers and if there is still paint on it, the process is repeated.
• After cleaning, the roller is hung on a nail or any hook for drying.
• After drying, the instrument is covered aluminum foil or plastic wrap to protect it from dirt and dust.

Details about the care of the tool will show the video in this article.

A few tips for using paint rollers:

• If the repair stops for a short time, the roller can be placed in a plastic bag to keep it from drying out.
• The tool can be stored in a tightly closed bag in the refrigerator. After that, it will take some time to defrost it before use.

To apply paint on surfaces, it is necessary to choose the right tool, and after completion of work, ensure proper care and storage for it.

When, in the early 40s of the last century, a resident of Canada, Norman Bricky, invented paint roller, he did not imagine what a revolution this simple device would make in the construction business. Since then, the purpose and external mechanism have not changed much - the materials used for manufacturing have changed.

Not a single repair - whether it is the work of professional builders or work on their own- can not do without this universal assistant. After all, with the help of a roller, you can apply paint or primer, glue or varnish to the walls and ceiling. But you can’t just go to the store and buy the first tool you like. It is important to know how to choose the right size, design and type of roller for a particular paint and varnish material and type of work.

Types of rollers

When it comes to a paint roller, first of all, we mean the roller nozzle and the material from which its fur coat is made, because it is the composition and structure of the absorbent material that affects the final result and the quality of the paint and varnish coatings. In order not to be disappointed by the remaining stains, unpainted areas, splashes or bubbles at the end of the work, it is worth understanding the intricacies of selecting a tool.

The working surface of the roller is a fur coat

The working surface of the roller, called a fur coat, is attached to the frame cylindrical shape and is made from different materials. When the tool is dipped into a container of paint, the fur coat absorbs the substance and transfers it to the surface to be treated. Depending on the type of work and coloring materials, rollers with different ink output and, accordingly, a different fur coat are chosen:

foam roller

Rollers with a foam coat suitable for water-based paints and water-based adhesives used for priming and wallpapering. Foam rollers are cheaper than others, but they also need to be changed more often - the fur coat wears out quickly. Foam rubber is afraid of paints and varnishes, which include acetone. When exposed to destructive components, foam rubber swells, deforms and practically dissolves. In addition, the foam roller creates splashes during rapid operation and leaves small air bubbles on the painted surface.

foam roller

fur roller

Fur coat qualitatively covers unevenness, depressions and cracks ensuring uniform application of paint to the surface. The working surface of the fur absorbs a sufficient amount of paint, does not create smudges, streaks and splashes. Fur is used mainly synthetic, less often - natural sheepskin. The main disadvantage of rollers with a fur coat is the villi that come out and remain on the painted surface.

fur roller

Velor roller

Velor is fabric base with pile imitating plush. It does not roll, does not splatter paint and ensures uniform application of the coloring or adhesive composition. A wall painted with such a roller will look absolutely smooth. Velours excellent for applying oil, alkyd, water-based paints and varnishes and is not afraid of solvents. But this tool is not suitable for a beginner in the construction business, because the slightest marriage will be noticeable.

Velor roller

Velor-coated rollers are mainly used by professional painters for finishing work. In addition, due to the short length of the pile, velor absorbs a small amount of paint, so the tool often has to be dipped into it.

thread roller

The thread roller coat is made of a large number threads fixed on a woven base. Such a roller it is convenient when painting large areas and is suitable for any kind of paint and varnish materials. It is comfortable and durable, provided that it is washed well after each use. The thread coat leaves a pleasant texture on the painted surface, but when working with such a tool, you should not rush - the quick rotation of the nozzle contributes to paint splashing.

thread roller

Advice: Whichever roller you choose, when buying, be sure to check the quality of the clamps and the fur coat - it must be intact, neatly fixed on the base. The roller is considered of poor quality when a pile climbs out of it or threads of different lengths stick out.

Coat fastening method

The working surface is mounted on a cylindrical roller in three ways, depending on which the rollers are divided into glued, hot glued And with a coat on.

IN glued rollers the fur coat is a narrow strip wound and glued at an angle onto a cylindrical roller. The fur coat forms a kind of spiral, the edges of which are connected "butt to butt". Glued rollers evenly paint the walls due to the absence of seams. But they have a drawback - fragility. During operation, the paint destroys the glue and the fur coat “falls off” from the base.

The most advanced technology is used to manufacture hot-melt rollers. In this case, the fur coat is soldered into the plastic base, thereby increasing the wear resistance of the tool.

Fur coats of thermoglued rollers

Rollers with a fur coat They are a base-cylinder, on which a fur coat is stretched, having the shape of a sleeve. In most models, from the sides of the cylinder, the working surface is clamped with end caps, and only foam rubber coats small sizes are held on the base due to the force of elasticity.

Roller coat (separately)

Thanks to removable end caps, a worn fur coat can be replaced with a new one if necessary. Removable fur coats are more durable than glued ones, but they have their drawback. For their manufacture, the material is sewn together, and when applying the coloring composition to the walls or ceiling, the seam may interfere with the uniform distribution of the paint.

Advice: When purchasing replacement roller nozzles, buy several pieces at once. It would be a shame to stop painting if the fur coat suddenly peels off or the end clamps of the roller break.

Roller dimensions

The choice of roller is influenced by the size of the surface to be treated - for a larger area, a tool of greater length and diameter is chosen. Depending on the size, paint rollers can be divided into three groups:

Universal (standard)

The length of universal rollers is 140-250 mm. Professionals consider the 180 mm roller nozzle the best option, so tools with standard sizes are most often used for painting work.

facade

Facade rollers usually have large diameter and length from 180 to 270 mm. When impregnating wood, painting the foundation or floor covering a large area does not require a high quality finish, so it is more advisable to use oversized rollers.

small rollers

The length of small rollers ranges from 50 to 150 mm. They are convenient to paint corners, narrow surfaces and hard-to-reach places.

Roll pile length

Replaceable nozzles-rollers are available with a pile length of 4 to 25 mm. The choice of pile length depends on the quality of the treated surface - the more irregularities on the wall, the greater the length of the pile must be applied. For smooth walls, short-haired fur coats (4-9 mm) are used, which will evenly distribute the paint over the prepared wall. If you use a long-haired roller for a flat surface, excess paint will form smudges and streaks.

For embossed wallpaper, textured plaster and rough surfaces, rollers with a pile length of 12-25 mm are used. Due to the sufficient length of the pile, the paint penetrates into all the depressions, recesses and protrusions on the wall. A short pile will not cope with this task and will leave unpainted areas.

Roller design

Depending on the type of attachment of the roller to the handle, the design of the tool is clasp or frame. Let's consider each of them.

Clasp roller

The clasp fastening system is popular and loved due to its versatility and simplicity. The clasp tool consists of a handle with a holder in the form of a metal rod, called a clasp, and a roller equipped with a device for fixing and rotating. Assembly of the clasp roller is quick and easy - the roller is mounted on the clasp, and the tool is ready to work.

Byugelny fastening of the roller

The clasp system allows you to use the same clasp handle and change roller nozzles depending on the type of work and paints and varnishes. In this case, there are no problems with the selection of the diameter of the inner hole: yokes for rollers standard sizes have a diameter of 8 mm, and for small ones - 6 mm.

Frame roller

The frame roller consists of a clasp handle and a roller in the form of a hollow cylinder-frame, on which the fur coat is fixed. Such a system fixes the frame on a metal rod with the help of plastic bearings permanently fixed on the clasp. In building materials stores, you can buy a frame roller, the fur coat of which is put on a plastic or wire "skeleton". It is convenient to paint over structural surfaces with such rollers - the paint will penetrate into depressions, cracks and recesses.

Frame fastening of the roller

Frame rollers are not as popular as clasp. The leader in the production of rollers on frames is the Swedish company ANZA. The tools produced by her are of high quality, but expensive, so not every professional will spend money on a branded roller, to say nothing of ordinary people. Although Chinese "clones" are affordable, they become unusable after 2-3 hours of operation.

Roller handle

The handles are made of plastic and give them an ergonomic shape to make it easier for the master to work. long time. Tool handles are also two-component - made of plastic and elastomer with anti-slip properties. Due to the shape of the handle, the paint does not fall on the hands of the painter during the runoff. Roller handles are easy to store hanging thanks to the holes they are provided with.

Handles are different sizes, but the length of 25 cm is considered the most convenient for standard work.

This length is recommended when painting the ceiling if the work is carried out from a stepladder or construction goat. The universal shape of the handles allows the use of telescopic rods that can increase the length of the handle by 0.8-4.0 m. Using such extensions, you can paint the ceiling or walls of any height directly from the floor.

In addition, the same handle is used repeatedly, and if the replaceable roller nozzles are worn out, it is enough to buy new ones and fix them on the holder.

Rollers for decorative painting

Decorative painting rollers experienced the peak of their popularity in our country in the 70s of the last century, when, due to a shortage of wallpaper, residents tried to add at least some variety to the boring interior of plainly painted or whitewashed rooms. Now the tasks and the quality of materials have changed, but the technology for applying drawings has remained the same.

A modern paint roller, for all its seeming simplicity, is a design tool and is widely used for decoration - patterned rollers are equally convenient to apply a pattern on walls and ceilings, furniture and wallpaper for painting, fabric and even paper. With the help of such tools, any pattern can be created on the surface to be painted, whether it is an abstraction, imitation of stone or wood, a geometric or floral pattern. Rollers for decorative painting, depending on the material of the roller, are rubber or foam rubber.

On the surface of rubber textured rollers there is a convex pattern, which remains on the painted surface during knurling. Textured roller consists of two rollers- patterned and feeding, adjoining close to each other and fixed on one handle. The feed roller can be fur, foam rubber or velor, its task is to absorb the paint and give it to the patterned one. The textured rubber roller can be chosen with any ornament and replaced if necessary.

Textured rubber rollers are an order of magnitude more expensive than conventional ones, but having bought a tool once, you can use it for quite some time. For long-term use of the patterned roller, it is enough to thoroughly rinse it after every work.

12.11.2015 13:40

A paint roller is an excellent choice when you need to paint a large surface area and a regular brush is no longer enough. Also, the roller is useful for covering walls with a primer or adhesive solution, applying spectacular textured patterns.

The answer to the question of how to choose a paint roller lies in the purpose of this tool, the type of paint, and also the result that needs to be obtained after painting. We will give the main types of rollers and indicate the scope of their application so that the choice for each customer is as simple as possible.

They are a universal tool that allows you to qualitatively apply almost any paint and varnish composition. Most often, experts recommend choosing such rollers for painting rough surfaces, where it is necessary to obtain a uniform application of the coloring composition.

Thread rollers are a material with many threads of strong fibers (special fur-polyester), which resembles a terry cloth. The advantages of choosing such a paint roller include the fact that it does not leave lint on the painted surface. Also, these rollers are easy to clean and very easy to clean.

Rollers from the material "syntex"

Sintex rollers are tools made of special rope fur, consisting of synthetic polyacrylic fibers. These rollers are offered for professional works and are divided into products for facade and interior work. Sintex rollers are chosen for applying paints on rough surfaces, which makes it possible to achieve uniform coloring.

Polyacrylic rollers

Polyacrylic rollers are the choice of professionals for applying any type of varnish or paint to the prepared surface. However, it should be borne in mind that polyacryl is unstable to excessively aggressive environments, therefore such rollers are used for applying water-based paints.

The "fur" of the roller is made of durable polyacrylic, so this tool does not leave lint on the finished surface and allows you to achieve the perfect result. An excellent and, most importantly, affordable choice for painting plastered walls.

wool rollers

Rolls made of natural sheep wool are great for painting with oil paints, various varnishes and enamels. Also, wool rollers can be used for other types of paint. The exception here is lime-based compounds, which have a detrimental effect on the pile of the roller, destroying it. Woolen rollers allow you to distribute the paint well over the surface due to the excellent absorption and return of the paint.

Fur rollers

Fur rollers are tools made from artificial material. The most common options are thread fur made of polyester and polyamide. Such rollers allow you to work with any kind of paint and varnish products, achieving excellent uniformity of the coating. Rollers can be used for painting large and small surfaces.

Velor rollers

Velor rollers stand out from other models in that they practically do not roll and do not splatter paint, unlike models with a longer pile. Such rollers can be used for painting any surface, but are most often used for finishing painting perfectly smooth surfaces. The use of a velor roller is possible when working with water-dispersion, alkyd and oil paints. Also, velor is not afraid of the action of solvents, which makes it very practical and even more versatile.

foam rollers

Foam rollers are ubiquitous for applying water-based paints and varnishes created on a water basis. Such rollers are valued for their elasticity, which allows the roller to restore its original shape. When using a foam roller, no air bubbles remain on the surface, which makes it possible to achieve high-quality and uniform coloring. When choosing a foam roller, you should pay attention to its density: the higher it is, the longer such a tool will last.

Pressure (wallpaper) rollers

Pressure rollers are often called wallpaper rollers, as they serve to smooth the surface of the wallpaper during gluing. The structure of such a roller is a foamed rubber, which allows you to create a uniform force, leveling and smoothing the wallpaper and joints.

Structural rollers

Structural rollers are hard elastic foam rubber with an uneven surface. Such a roller can have large holes, all kinds of patterns on the surface, which, when smoothing the paint, make it possible to obtain an unusual decorative effect. Also, a structural roller can be used to give texture finishing materials applied to walls or ceilings.

Polyamide rollers

Rollers made of polyamide are very durable. Such tools are characterized by excellent paint retention, which allows you to distribute the finished solution over the surface as evenly as possible. Rollers made of polyamide have one of the best indicators in terms of chemical resistance, which allows them to be used with any composition of colorants. Long-haired polyamide rollers are used for painting rough surfaces, while similar short-haired tools are suitable for painting smooth surfaces.

Elitacolor rollers

Elitacolor rollers are professional tools for applying paint to rough surfaces. Such rollers are made from special rope fur (polyacrylic), which can work with water-dispersion paints, as well as paints and varnishes based on chemical solvents. Elitacolor rollers can be used for facades or interiors.

Needle rollers

Needle rollers are used to evenly distribute viscous formulations. For example, for pouring concrete floors. Depending on the type and viscosity of the composition, the needle roller can have a different needle length.

Roller marking

When choosing a roller, you must always check the markings. As a rule, it contains an alphabetic and numeric designation:

• the Ø symbol and the number indicate the diameter of the rounded part of the roller, the units of measurement are millimeters;
• the letter designation is the material of the roller, as well as the surface for which it is intended (not always indicated), for example, BB is a velor roller, and VMP is a highlight roller for the floor;
• the number following the letters is the length of the roller cylinder in millimeters.

For example, Ø50 BB-200 is a velor paint roller with a diameter of 50 mm and a length of 200 mm.

If you decide to paint the ceiling yourself, then in this case success will depend on several points at once. Firstly, the quality and type of paint chosen will play a role. Secondly, for good result what matters is your skill as a painter. Thirdly, it is of great importance to obtain high-quality ceiling covering will have a design and type of roller for painting.

The choice of a roller is a responsible task, especially since modern manufacturers offer a lot of various options performance of this instrument.

Convenient design

The device of the roller is quite simple: it consists of light metal or a plastic cylinder, on which a special coating is put on (the so-called fur coat). A handle is attached to the cylinder, which can be of different lengths. This simple and time-tested design allows the roller to remain the most popular painting tool for applying any type of paint to the most various surfaces(excluding curly ones). The tool is used to work with oil, water-based, acrylic, acrylate and latex paints.

The versatility of the tool also lies in the fact that it can be used to apply glue, antiseptic, primer and other liquid mortars.

What is more convenient - a roller or a brush?

The paint brush has its advantages when repair work and remains indispensable tool when painting the most different surfaces. The use of the brush allows us to paint the most inaccessible places, covering elements of any shape.

However, when it comes to the ceiling, which is a flat plane, the use of a brush is not advisable: the roller provides a smoother finish, speeds up the work, makes it easier and more efficient. The contractor is less tired and generally does the job of painting the ceiling much faster.

Prices for rollers

Prices for paint brushes

paint brush

A brush can come in handy only if the ceiling is a curly structure and you want to paint over the corners and hard-to-reach places with high quality.

What should I pay attention to when buying a roller?

There are several parameters to consider Special attention when buying a roller; these include:

• pile length;
• coat material;
• cylinder diameter;
• roller width;
• handle length.

The type of coating and the length of the pile (if we are talking about pile materials) are especially important when choosing a roller.

What material is better?

If you are painting the ceiling water-based paint(which is observed most often due to the suitable characteristics of this species building material), it is preferable to choose a roller with a long pile. Such a tool has good absorbent properties and can provide a smooth surface and dense paint. A short pile absorbs less solution, resulting in a less dense layer, which forces the performer to dip the roller into the paint more often.

However, with all the advantages of a long pile roller, such a tool does not give a perfectly smooth surface, so it should be used for the lower layers. The final layer is best done with a new roller with an average pile length.

Foam rubber and velor rollers have their drawbacks when painting the ceiling: foam rubber absorbs a small amount of paint, which makes it inconvenient to use. Velor can leave air bubbles.

Table number 1. Types of rollers according to the type of coating material.

Roll size

The ceiling area can be very large, so the use of a roller of small diameter and a small cylinder width may not be practical. Therefore, it is usually recommended to purchase a large roller. There is one “but” here: such a painting tool can be heavy. Please note that you will have to work for a long time, holding the roller on weight. And after absorbing the paint, it becomes even harder. Therefore, we recommend choosing a medium roller (up to 30 cm wide), which is more convenient to use, since it is easier to keep it on weight.

acrylic paint prices

acrylic paint

Another point is the shape of the ceiling. It can be curly, multi-stage. It is difficult to paint over such a shape with a large roller - you will need a medium-sized tool. Perhaps, the arsenal will have to be supplemented with small rollers and paint brushes of various sizes.

Paint roller type VP (1 - roller; 2 - bracket; 3 - handle)

Modern manufacturers offer the most advanced roller designs: you can find rollers with a special telescopic handle(retractable), as well as tools designed specifically for painting the ceiling and having a special trough (tray) for draining excess paint.

Also, in order to save money, manufacturers offer customers replacement elements for roller handles. This smart choice, because the handle of the roller lasts much longer than the skin itself, and by buying replacement skins, we save on the metal base of the tool.

Video - Choosing a paint roller: types, sizes, features

How to choose a quality tool?

In order not to be mistaken with the quality of the tool, test the roller directly in the store. So you can protect yourself from acquiring low-quality things. Of course, the price already says a lot. A more expensive roller will last longer, provide more smooth painting, while an inexpensive tool may be short-lived and require more time and effort to create an attractive ceiling finish.

The required actions are listed below.

Try to check how strong the instrument you choose is. Squeeze the roller itself: will it deform? If yes, then it is better to pay attention to another model.

See how well the roller is made for you. If a seam stands out on a fur coat, then such a tool will not be able to provide quality coating on the surface of the ceiling (traces may remain).

If you choose a roller with a long pile, just try to pull it by the pile and see how strong the material itself is. Is there any lint left in your hand? If so, this is a reason for doubt. Might be worth considering a more expensive option.

Instructions for painting the ceiling with a roller

The process of painting the ceiling with a roller is not difficult, you just need to use quality materials and act in accordance with the instructions.

"Slip" from plywood for roller

Table number 2. How to paint a ceiling with a roller.

The final layer must be applied in the direction away from the window.

Video - Painting the ceiling with a roller

The main advantage of the roller over paint brush in that it provides the opportunity to cover a much larger surface area for processing. It is much more profitable to paint walls and ceilings with such a tool, as well as process wide panels, apply paint to various products.

There are times when it is inferior to the brushes in some work, for example, in painting hard-to-reach places, corners, lines of interfaces of structures, but basically it is the roller that can significantly reduce the time of painting work.

Based on the desire to get as much pleasure from work as possible, and not turn it into a long painful process, people seek to acquire convenient quality tools.

This also applies to rollers. You always want to know in advance which roller is better. Their quality largely determines the ease of work. In this regard, you need to carefully look at the main elements of the tool: a fur coat, a cylinder.

Varieties of fur coats

In the modern construction market, you can buy rollers of any type and for any work. The difference between the products lies in the type of material used for tailoring fur coats. Most often, foam rubber, fur, velor, polyamide are used in the work.

foam roller

The cheapest option is to sew a foam rubber coat. It is excellent for priming surfaces with water-based paints. But for a water emulsion, this type of fur coat is not suitable.

The main advantage that a foam rubber roller has is its low price. At the same time, it is not recommended to take it for painting walls and ceilings, since when rolling it forms splashes and stripes. But to paint the carpentry with them is a nice thing.

Such a roller will paint a wooden window in just five minutes. The main thing is to first seal the perimeter of the glass adjacent to the glazing beads with masking tape.

fur coat

Fur as the main cover of the tool is convenient for working with any compositions. With water-based and oil. The fur surface perfectly absorbs paint, does not create bubbles on working surface and evenly applies and rolls out the composition. With such a tool, it is good to mask the places where cracks, chips, and small depressions appear.

Among the disadvantages of the fur roller for painting, the possibility of partial loss of pile during dyeing. It is worth carefully choosing fur coats of this type. If you save money and buy a cheaper option, you will need to get ready to clean off numerous villi from the treated surface.

Roller with a fur coat from velor

Velor in terms of its properties and the quality of surface coloring is on a par with the fur coating of the instrument. To some extent, he even surpasses him. Coloring with a velor fur coat makes the surface smooth after drying. This coat is perfect for weaving wooden surfaces(parquet, floorboards).

How to understand the dimensions of the tool

The rollers have their own division by size. To have a visual representation on this topic, you can view photos of paint rollers. It will be found that the presence of different parameters greatly facilitates the workflow. Comfortable conditions for working with the tool are created.

First of all, the dimensions of the main part - the cylinder - are taken into account. The parameters of the handle play a smaller role. This feature divides instruments into the following types:

• Type - mini. The cylinder has a diameter of no more than 9 cm and a height of about 15 cm. The product is suitable for painting surfaces in hard-to-reach places.
• Type - midi. The diameter is the same, but the height is increased to 20 cm. The tool is universal and is recommended for finishing walls, ceilings and other wide surfaces. An additional plus the weight of the roller is considered to be low.
• Maxi type. The length of the roller reaches 30 cm, and the diameter value is 8 cm. Such a roller is a professional tool. Accordingly, its price will be significantly higher than the previous types.

Such a tool can be used both for interior work and for exterior facade work.

Separation of rollers by functional types

On a functional basis, the rollers are divided into several groups. According to the location of the working surface, the tool is referred to as intended for internal processes and external ones.

For example:

• Front rollers. As an interlayer they have an intermediate packing. Due to this, uniform sliding is achieved, excluding splashing of paint.
• Textured rollers. The top cover of the cylinder can be rubber, plastic, metal, fur, and so on. Are intended for creation of relief drawings. Involved in the application of decorative plaster compositions.
• Needle rollers. Indispensable when working with polymeric floor coverings. Roll the mixture quickly and evenly over the floor surface, hiding all small cracks.
• Rubber roller. This tool is used by professionals. This is one of the varieties of textured look, also associated with the application decorative plaster.

Photo of paint rollers