In modern kitchens, you can find countertops made of artificial or natural stone, glass, of stainless steel, ceramic tiles, but most often a solid wood or chipboard sheets lined with plastic. If you do not know how to protect a capricious surface, there is a risk of its deformation and rapid destruction under the influence of moisture and other negative factors.
Compliance with the basic rules for the care of raw materials will avoid unpleasant consequences. In addition, there are many effective approaches that improve the quality of the product and its resistance to external influences.
Basic rules for working on the countertop and regular surface care
To prevent scratches and other types of damage to the surface of the worktop, it is necessary to observe following rules for the implementation of work:
- When cooking, use cutting boards even if you don't need to cut anything. When cutting products, you need to ensure that the process does not go beyond the special stand.
- Do not leave knives and forks on the surface of the countertop, it is because of them that chipboard sheets are quickly covered with a layer of scratches. Drops of water and food particles are gradually clogged into small holes, which causes the wood to swell and warp.
- If you need to attach to the work surface manual meat grinder or similar unit, a soft cloth pad must be used.
- Regardless of the material from which the surface of the countertop is made, it must be protected from prolonged and abundant exposure to moisture; it is highly recommended not to use abrasives, metal sponges and brushes during cleaning.
Tip: If the surface is additionally coated with varnish or paint, then the use of chemical cleaners, especially solvents, will also have to be abandoned.
- In extreme cases, the work area can be protected with a special oilcloth. The main thing is to choose a material that does not change the aroma and taste of the processed products.
- It is not recommended to put on wood, chipboard sheets and tiles hot dishes, be sure to use a protective lining (at the same time, you need to make sure that it is not made of metal or plastic, but wood or multilayer fabric).
Even if all these rules are observed, the safety of the coating is not guaranteed. Reliably protect wooden surface can only be achieved through proper cleaning and special pre-treatment.
Methods for protecting countertops from the formation of persistent stains
No matter how carefully the work is carried out in a specialized area, the appearance of stains cannot be avoided, especially if it is located near the sink. Drops of water and detergent can cause no less problems than traces of grease. So that the surface of the countertop does not darken and does not become covered with signs of decomposition of the material, it is necessary to adopt the following tips:
- Dry dirt, grease and traces of moisture must be removed immediately. You should not wait until the different components mix and dry, turning into a dense crust.
- For regular cleaning of solid wood or chipboard sheets, a weak and slightly warm soapy solution is allowed.
- Stubborn stains can be removed with lemon juice. If at the same time a little salt is poured onto the surface of the pollution, then it will be possible to pull the dirt out of small scratches.
- A darkened tree is recommended to be treated with a weak solution of hydrogen peroxide. Just pour it on the stain and rub it off after a few minutes. soft cloth. The same manipulation allows you to disinfect the surface.
- In some cases, professional wood bleaches or homemade preparations based on oxalic acid help. They simultaneously draw dirt out of the cracks, preventing the expansion of the tree, bleach and disinfect the material.
It is better to process a fresh countertop without the use of water at first. You can simply rub the dirt with medium grit sandpaper to remove the stain, then sand the surface with the softest equivalent of the product.
Hardening and sealing wood - manipulations that increase the practicality of the material
To minimize damage from moisture and other external irritants, a massive tree can be hardened. True, this manipulation is very different from the approach that is used in the case of metal:
- Pour a little heated mineral (not edible!) oil onto the working area. We wait a few minutes until the fibers absorb the right amount of product.
- We take a rag and begin to rub the composition into the surface, acting in the direction of the fibers.
- We leave the structure for half an hour so that the main component is well absorbed. We make sure that at this time no drops of water fall on the countertop, this will reduce the effectiveness of the approach.
- We wipe the treated area with a waffle or paper towel removing excess oil.
If chipboard sheets are used as the main material, then the sealing procedure will be the best protection against damage. For its implementation, we use ready-made polyurethane (for Food Industry), which is applied to the problem area in at least three layers. After such a simple manipulation, there will be no problems with cleaning the countertop, and it will become indifferent to the effects of moisture. It is still impossible to cut products on such a coating!
Furniture wax can be useful to restore wood and eliminate traces of cracks. To do this, heat it up on the stove or in microwave oven. For one part of the product we take four parts of mineral oil, mix. We treat problem areas with a warm composition, carefully rubbing the drug into cracks. Leave the mass to dry, and then polish the surface with a soft cloth. Such manipulation is recommended to be carried out at least once a year for the purpose of prevention.
The plane of the table in the kitchen is an indispensable part kitchen furniture, it is subjected to constant mechanical stress and is damaged over time. Therefore, the owners of kitchen furniture ask themselves a non-idle question: - How to cover the countertop so that it does not lose its presentation for many years?
In the kitchen, the top of the table or the area above floor cabinets the headset is used as a working area for cutting food and cooking, as well as a place to place household appliances and kitchen utensils. Such a working area must be resistant to shock and various mechanical damage, to the effects of temperature, ultraviolet radiation and water.
Features of wood countertops
Kitchen sets are made using various raw materials, such as wood. It can be either natural, that is, without a special composition applied on top, or coated with varnish or paint.
The table provides data on tables made of wood.
The advantages of countertops made of wood are:
- a large number of different forms;
- attractive appearance;
- ease of restoration work;
- This material is environmentally friendly and warm.
The disadvantages of countertops made from wood raw materials are:
- ease of ignition;
- ease of contamination;
- easily scratched;
- has a rather high cost.
Ways to protect the kitchen work surface
The working area of the room in which food is prepared is exposed to various liquids, therefore, in order for it to serve for many years, it must be protected from water.
There are several ways to do this:
- Apply an oil to treat objects made of wood, which is absorbed into the material and prevents the fibers from swelling when wet. For a wooden surface, the following industry products can be used: OSMO TopOil, Belinka, Adler Legno or many others. To treat the working area together with this substance or even instead of it, a special wax is used. But it must be remembered that such a tool will have to be updated over time, that is, applied again.
- Treat it several times with a special varnish for wood planes. If desired, a little pigment is added to it so that the deep fibers of the tree become darker, and the plane itself for cooking becomes expressive.
Oil coating for kitchen units
Oil protects furniture from the influence of not only moisture, but also from chemical, natural and domestic influences. This industrial product is mostly colorless and can be vegetable, mineral, or synthetic.
Such coatings differ from each other in the drying method:
- It dries completely, hardens after drying, it cannot be washed off with water and the original appearance of the processed furniture remains for quite a long time.
- Not drying at all or drying to half, it impregnates the wood deeply enough. It is made using natural ingredients. It is removed by applying mechanical action.
Before applying such a tool, the treated plane is thoroughly cleaned of all contamination and dried. If necessary old paint or the varnish will have to be removed. And if there are defects, then they must be leveled with a special putty, and then sanded with sandpaper.
The oil is applied with a brush or a lint-free cloth over the entire length of the fibres. The very first layer should dry for twelve hours, then a new layer is applied. Their total amount in this composition depends on the method by which the agent itself will be applied. If a brush is used, two treatments will be done. And when using a rag, you need to make three or four layers. After complete absorption of the composition, the entire area to be treated should be wiped well with a soft and clean cloth.
The presented coating has a number of positive properties:
- Does not change the color of the plane for working with food, emphasizes its "pattern".
- Leaves the initial natural exchange of moisture in the surface and prevents the appearance of fungi, so the original appearance of the treated area does not change for a long time.
- If elevated temperatures act on the outer part of the object for such processing, then the agent does not delaminate and does not flow.
- Furniture oil is environmentally friendly, so the contact of food ingredients with the surface on which the described composition is present will not harm human health.
- Oil hides small scratches, worn areas and stains left by dishes.
- If it becomes necessary to renew contaminated areas, then you can remove only part of this coating, and then reapply it to the desired areas.
- The oil is well suited even for aged wood containing pores, as it is deeply absorbed, gives elasticity to it and prevents it from drying out.
Updating the tree workspace
No matter how carefully the working area in the cooking room is used, it still loses its original appearance over time. After that, you can either buy a new headset, or try to update it. Coloring is the most in a simple way updates.
For coloring working area you need to do the following:
- clean the countertop with sandpaper or a grinding machine;
- cover all defects with a special putty;
- walk on the surface to be treated with paint with alkyd resin, the very first application of this paint will serve as a primer;
- if you wish, you can decorate the plane for kitchen work (draw something yourself or use stencils).
You can decorate the working part of kitchen furniture using the decoupage technique. This technique consists in the fact that decorative napkins are glued to the object to be updated, and then they are varnished several times.
Another way to update is to use a self-adhesive film, which allows you to give the updated item the appearance of a wood surface, stone, marble, leather or metal. Before pasting, the processed part of the furniture will have to be washed well, wiped dry and be sure to degrease.
Before using self-adhesive film, determine the dimensions of the area that needs to be updated in order to properly cut the film. Pieces of this film need to be cut a little bigger size than the table itself. After gluing, no bumps or wrinkles should be left on the film. The smoothing of the film is performed with a plastic scraper.
Cutting board care
Whatever material the kitchen countertop is covered with, it is better to cut food not on it itself, but on the surface of the cutting board. The raw materials for creating a cutting board can be different. kitchen boards are created using plastic, special glass or wood (most often chosen, as it is a natural antiseptic).
A new cutting board needs to be soaked, for which oil is suitable. This impregnation will protect it from liquid, food and bacteria getting inside it.
The oil layer of the board must be harmless to health and resistant to various damage. If oil based on sunflower or olives is used to cover the cutting surface, then after some time it may deteriorate, and this plank will need to be thrown away. Means based on coconut or flax are expensive, but they will not allow the cutting plane to become unusable.
Mineral-based oil will become good option cutting board covers. To do this, wipe the cutting board with it, wait until the composition is absorbed, and wipe it with a dry cloth. The procedure should be repeated once every thirty days.
Beeswax can be added to such a cutting board coating to give the coating a density. Wax will increase resistance to moisture and prevent aging of the cutting board. After applying the oil and wax, you will have to let the product dry, and then polish the outside of the plank to a shine.
You should also remember to disinfect the board for cutting ingredients for cooking. You can disinfect cutting boards using these methods:
- hot water and detergent containing surfactants;
- vinegar;
- hydrogen peroxide;
- chlorine bath cleaners.
Wood countertop restoration
Under the negative influence of liquid and high temperature, the upper part of the table may become higher, become loose or delaminate, after which the wooden surface must be restored.
Recovery is carried out as follows:
- all damaged areas must be removed;
- dry and sand the restorable outer part of the table;
- make a mixture containing sawdust and polyvinyl acetate glue;
- fill with the resulting mixture empty seats in the table that appeared after grinding, putty for wood is also suitable for these purposes;
- leave the restored item under pressure until it dries for about one day;
- as soon as the table is completely dry, it must be protected with a product containing silicone, oiled or varnished over the entire area of \u200b\u200bthe object.
To remove small scratches, you can wipe the problem area with strong brewed black tea, nucleolus walnut, a mixture of vinegar with an extract from olives, and you can also use machine oil.
If there are scratches on the wooden plane that are deep, then sandpaper is used to sand it, and then grinding. And to give the effects of glossiness and shine, you will have to use felt.
As a result of all of the above, we can conclude that in order to keep a wood kitchen worktop in good condition, it is best to cover it with a compound on oil based with added wax. And to save the board for cutting food, it would also be good for her to do such an application. Then these items will serve for a long time, provided that their protective coating is updated in a timely manner.
Wooden countertop for the kitchen in a rustic style
The smell of strong morning coffee fills cozy kitchen. I want to be here all the time, inhale the aromas of freshly prepared food - fried meat, mushroom soup, sweet freshly baked muffin. Here you want to meet in the evening, for leisurely conversations after a working day, spend the weekend in pre-dinner chores for the family, or just sit when your family has already fallen asleep with a cup of herbal tea. Yes, right here, behind this wooden kitchen countertop - warm, cozy, welcoming... and seemingly eternal.
Cozy kitchen island design with wood countertops
The wooden countertop is one of the most good decisions for the kitchen, practical and convenient
How to make a countertop practical and durable? Both of these qualities are laid initially, at the stage of choosing a wooden surface.
The tabletop must be well sanded and treated with a special compound before use.
What to look for when choosing a kitchen surface made of wood?
- You can not use veneer, MDF, chipboard, you can only natural wood.
- Has the meaning:
- wood age;
- cutting site;
- storage conditions.
- Products from glued wood are more flexible and resilient than analogs from solid wood.
- Properly selected coating will protect the tree in harsh operating conditions in the kitchen. Before painting a wooden worktop with oil or other suitable composition, it is worth studying the available range of coatings, their properties, features. Even better is to test the selected product on a small piece of wood.
- It is necessary to clearly define the methods of surface care, the possibility of recovery in case of damage.
For wooden tabletop choose hardwoods
The wooden countertop must be smooth, durable, resistant to moisture, temperature, cuts. product from more hard rock will last longer. Classic options kitchen worktops - oak or beech. More democratic countertops made of ash, pine, walnut, birch.
Since wood is not a moisture-resistant material, the part of the countertop adjacent to the sink can be replaced with a surface made of artificial stone
Larch is good. Its dense wood is resistant to mechanical destruction, deformation. The gum in larch wood prevents the growth of fungi, decay, such properties are ideal for difficult kitchen conditions. Larch has an important property to give or absorb moisture when humidity conditions change.
Great option for a countertop - a raw piece of wood
Advantages of wooden surfaces over other types:
- environmental friendliness;
- beautiful texture;
- a variety of colors, shades;
- ease of processing, unlimited possibilities in creating different shapes, neat edge with the possibility of various milling;
- ease of renewal and repair.
Glued wood plank top
Do not forget about the disadvantages:
- requires more careful maintenance than other types of surfaces
- periodic restoration is necessary;
- high cost of material, expensive work on its processing.
Wooden tabletop must be protected from moisture so that it does not get wet and fungus does not appear.
In a situation with a tree, you need to remember that all the difficulties in selecting, caring for, repairing it will more than pay off with coziness, beauty and extraordinary sensations of comfort in the kitchen.
Solid wood top for dining table
Oil, wax or varnish?
Leave correct operation wood countertop will prolong its life
High quality coating good lineups will give a wooden table top beautiful view, will protect from moisture, aggressive detergents.
In order for the countertop to last longer and retain its appearance, do not cut anything directly on the tree and do not check the surface for fire resistance and heat resistance
How to cover a wooden tabletop so that it serves as long as possible and at the same time remains beautiful?
- Oil, wax.
- Alkyd coatings.
- Water dispersion compositions.
Depending on the coating, the same type of wood looks different: polyurethane gel, gloss varnish, wood oil
Ideal impregnation with oil, oil-wax. Oil, saturating the wood structure, gives it water-repellent properties. With quality processing good oil with wax, the countertop becomes resistant to household chemicals, detergents, which are often used to wash kitchen utensils.
The ideal option for protecting a wooden countertop is a bio-impregnation based on natural vegetable oils and beeswax.
It is necessary to apply an oil coating either with a brush or a rag evenly over the entire surface
A special oil designed to impregnate wood that comes into contact with food will ensure environmentally friendly processing.
Oils for treating wood countertops can be vegetable, synthetic or mineral.
You can apply colored azure, stain, other water-dispersion coatings, followed by varnishing. The properties of the varnish used, its resistance to moisture, and the multi-layer coating are important.
The varnishing option is better, because the wood is covered with a protective layer, which is much stronger than oil protection.
A high-quality coating is carried out in several layers - in two or three, - regardless of paint composition. Do not mix alkyd and acrylic coatings. Before covering the countertop with the main composition, it is important to choose the appropriate primer.
Preparing a wooden table for varnishing
You can use a primer that matches the natural color of the wood, or a colored primer that matches the color of the lacquer that will be applied to the wood.
For maximum durability, you need to renew the coating one year after its application. The tool for "getting used" to the surface takes time at various temperature conditions. When exposed to external conditions, microcracks appear on the surface of the coatings, which are visually indistinguishable. Therefore it will be useful upper layer lightly sand and apply a new layer with the same composition.
We sand the surface and apply a layer of varnish along the wood fibers
Beech wood before and after treatment: on the left - untreated beech, in the center - after treatment with white oil, on the right - oil varnish
The quality of the coating can be tested in the following way: put a few drops of water on the countertop and observe how quickly they are absorbed. good coverage has excellent water repellent properties.
The impact of water can only be short-term - otherwise the wood will have to be sanded and waxed again.
It is important to take into account the drying time of the compositions, it can vary from several hours to several days. Natural oils, acrylic mixtures have a long drying period or accumulate strength gradually over time, so it is important to limit the use of the countertop during the drying period.
It is impossible to protect wood from scratches, mechanical influences with paints and varnishes or oil compositions, so there is only one way out - to treat wooden countertops as carefully as possible.
Wooden countertop is the perfect solution for modern kitchens
The slight carelessness of the wooden surface will give the kitchen ... humanity. Isn't that what we value the most? Humanity... Kitchen? Why not?
A place for a tree can be found in the kitchen in any style, it is only important to approach the matter correctly.
Wooden countertop in the kitchen, it's beautiful and quality material to decorate your kitchen
Video: Oil for working surfaces on larch
Natural wood in the kitchen? Yes, and this article will blow your doubts to smithereens! A wooden countertop is one of the most successful solutions for the kitchen, practical and convenient. You just need to know these 6 professional secrets.
Should there be a wooden countertop in the kitchen? We asked real professionals: qualified designers, craftsmen, technologists and wood specialists - those whose opinion can be trusted.
1. Why is a wooden tabletop not scary?
On the one hand, a smooth warm wood with a beautiful natural structure- excellent material for production of furniture. Easy to use, eco-friendly, always fashionable and up-to-date. Moreover, the countertop is not a heavy wooden sideboard for you, which is impossible to move. It is not necessary to make all the furniture out of wood, it is perfectly reasonable modern solution only countertops and, perhaps, some other individual parts will be made from this material.
But many are afraid of how wood can behave, they are afraid of fungus, cracked varnish ...
But professionals think differently: “A wooden countertop is not a problem if you apply reasonable adequate care to it. There are not many materials used for countertops in non-professional kitchens that are not afraid of any impact and do not require maintenance - says Andrey Lyamin-Borodin, builder, CEO online repair service PriceRemont. “All materials age during operation, but the peculiarity of wood is that it can age beautifully.”
So what are we dealing with? Mikhail Vychuzhanin, Wood Finishing Specialist, North House, determines the advantages and disadvantages of wooden countertops so.
- environmental friendliness of the material;
- beauty and variety of wood texture;
- unlimited parameters of the product: you can make almost anything and anything from wood;
- easily updated;
- the ability to perform any milling of the edge of the tabletop.
- more careful care is required;
- will need restoration after some time;
- the relative high cost of the material and work with it.
2. Which wood for the countertop should I choose?
And here is the answer to the question, what types of wood and wood characteristics are worth paying attention to.
“When deciding on a wooden countertop in the kitchen, please forget about MDF, chipboard and veneer. Only natural wood, - advises Artyom Lepeshkin, General Director of Dynasty House of Interior Solutions. It's not about harm, but about the properties of the material. The countertop is exposed to human aggression every day: crumbling, cutting, whipping, spilling and spilling is a common thing in the kitchen. The surface must be durable, smooth, resistant to cuts, moisture and temperatures.
The classic option is oak or beech: strong and durable wood species. Some choose teak and mebrow. More democratic options: pine, walnut, ash, birch. We prefer larch: you will have to pay more, but it will also last longer. A feature of larch in a very high density of wood, growth rings are located along the trunk with small intervals. She easily bears mechanical damage and deformation, withstands high compressive and pressure loads. It contains gum - a natural antiseptic that protects against decay and mold damage. Ideal for the kitchen. Larch gives and absorbs moisture when humidity changes.
The method of manufacture also affects durability. A solid wood tabletop is more prone to warping than a glued one assembled from several plates. This method increases flexibility and resilience.
“You should pay attention to such points as: the age of the wood, the method of its extraction, storage conditions, the region where the material was brought from,” adds Mikhail Vychuzhanin. most best breed wood for the manufacture of countertops, he considers oak. - The stronger and harder the wood, the longer your countertop will serve you. There are countertops made from solid birch, cherry, walnut.
3. How to cover a wooden countertop in the kitchen: Belinka
With the question of how to protect the wood of the countertop, we turned to Chief Technologist TM Belinka Valery Ermakov.
“The ideal option for protecting a wooden countertop is a bio-impregnation based on natural vegetable oils and beeswax - that is, oil-wax for wood. Natural oils for wood can make its surface waterproof, which means that wood is not afraid of fungus and mold. By the way, a countertop impregnated with high-quality wax oil becomes resistant to standard kitchen detergents - nothing bad will happen to wood from diluted household chemicals. Even better and more reliable processing work surface kitchen and special oil for wood in contact with food. And of course, no one canceled the more familiar coatings - interior varnish for wood or a combination of colored azure with subsequent application of varnish.
4. How practical is a wooden countertop?
How to save a tree besides using wood products?
“If you want your countertop to last longer and look better, follow simple rules: do not cut anything directly on the tree (perhaps only oak will endure such violence), do not check the surface for fire resistance and heat resistance, - continues Artem Lepeshkin. - Wood can darken from very hot objects, ash is especially sensitive. But if wine or juice is spilled on the surface, it is enough to wipe it with a damp microfiber cloth. Do not use wet rags, this will swell the wood."
Andrey Lyamin-Borodin advised not to use aggressive household chemicals for washing the countertop: “It happens that drops of such a product fall on the countertop when cleaning the sink or hob. If this product contains, for example, a solvent, it can change the color of the wood, bleach it. Important rule if any stains get on the countertop, do not allow them to be deeply absorbed, and therefore, remove them immediately. A stain that cannot be washed off can be removed by walking over the area with a fine-grained sandpaper, after which it will be necessary to renew the protective coating.
To the question of choosing a sink - in this case it should be a mortise or, in other words, an invoice. An undermount sink will create a constant exposure to water on the edge of the countertop, from which it will inevitably deteriorate. However, lovers of country style or owners of countertops made of especially waterproof wood may not be confused by this.
5. Will this countertop fit my design?
Wooden surfaces in the kitchen are also wide design possibilities, current trend. Here's what the designers think about it.
“The world is becoming more and more urbanized, and a person is stressed due to the lack of communication with nature. Natural materials in the interior, such as wood, stone, clay help modern man feel comfortable in the "stone jungle", - comments Valentina Konstantinova, creative designer at Kashirsky Dvor.
The designer gives examples of the use of a wooden countertop in “star” interiors: “Jake Gyllenhaal, the star of the movie Source Code, uses a wooden countertop in a Provence-style interior. The apron for the kitchen is trimmed with small “boar” tiles, and the furniture is exactly like in the south of France: delicate blue color with chamfer and retro handles.
Since wood is not a moisture-resistant material, the part of the countertop adjacent to the sink can be replaced with an artificial stone surface, as in the kitchen of Sarah Jessica Parker. The wooden countertop fits perfectly into the modern urban interior of the actress's kitchen, built on contrasts of textures and colors - white stone and dark brown wood.
Designer of the LOFT & HOME interior studio Anastasia Yarysheva believes that you can find a place for a tree in the kitchen in any style, it is only important to approach the matter correctly. “So, a solid wood countertop with knots, uneven texture, aging effects will suit a rustic or loft style kitchen. But smooth wooden surfaces will look great in modern interiors, high-tech, especially tinted in white, black or graphite - such a countertop will be effectively combined with chrome and glass surfaces. It is worth paying attention to the options from glued - perhaps even from different breeds- wood: the rhythmic pattern of the elements can emphasize the beautiful geometry of the room.
6. How to update wood countertops?
Sooner or later, the surface of the wooden tabletop will have to be updated - to re-saturate the tree with oil. How often should this be done?
“It is difficult to name a specific period, a lot depends on the specific operating conditions,” answers technologist trademark Belinka. - To understand if it's time to renew the countertop, put a few drops of water on the surface and watch - if the wood quickly absorbs them, it's time to get out the jar of oil. However, do not worry, applying oil is a simple task, each housewife can handle it on her own.
More about that, we wrote in our blog.
Summary
A wooden countertop is a great solution for modern kitchens, and there is absolutely no need to be afraid to use wood in the kitchen. A little care for the tree - and your kitchen will delight you for many years!
The kitchen is the heart of our home, a place where everyone visits at least once a day, and for many families it is also a place where the whole family gathers every day, cozy communication, and intimate conversations. For many housewives, the kitchen is the place where they spend a huge part of their time, and the convenience and beauty of this place largely determines whether working in the kitchen will be a heavy duty or a joyful creative process.
When buying a kitchen, many people spend a lot of money on the kitchen itself and its equipment, but often do not pay due attention to such important detail like a tabletop. But it is the countertop that is used in the kitchen every day, comes into contact with food, is exposed to various influences, is cleaned and wiped many times more often than, for example, kitchen facades.
That is why for a long time even ardent adherents natural materials in the decoration of the house, such luxury as countertops made of natural wood was not available. After all, when choosing a wooden countertop, many questions arose. First of all, how to properly protect a wooden countertop for a long time? How to cover a wooden countertop and how to care for it. Is it possible, if necessary, to update the appearance of the countertop, to remove traces of damage? In addition, the composition of the countertop coating is of particular importance, because it must be harmless to food that will be in direct contact with the countertop.
Now, to the great joy of those who want to get a wooden table top, there is perfect solution all problems. Mir Pola offers the most environmentally friendly oil Top Oil With hard wax, designed specifically for wooden furniture and countertops, from a German manufacturer natural remedies wood protection OSMO .
+
For furniture and countertops (including kitchen ones)
+
Leaves wood pores open
+
Has a water repellent effect
+
Doesn't crack, peel or flake
Consumption: 1 liter per 12 m 2 in two layers
Product Description
This oil has a special combination natural oils and waxes suitable for processing furniture and kitchen worktops. The wood remains natural, while emphasizing the natural color and structure of the wood.
The treated surface acquires wear resistance, dirt and water repellency. Any stains are easily removed from it. Areas subject to heavier loads are easy to renew. To do this, it is necessary to clean the damaged area from dirt and apply a new layer of countertop oil, while no differences from the previously treated surface will be noticeable. No sanding required!
Furniture and countertop oils are based on natural vegetable oils and waxes. Thanks to this, the pores of the wood remain open, and the coating is not subject to cracking, peeling and peeling.
The treated surface is resistant to cleaning agents, drink stains, water and complies with DIN 68861-1C.
Colorless countertop oil does not require special skills to apply.
You can enhance the gloss of the treated surface by additional polishing.
Oil base
Special combination of natural oils and waxes plant origin. Deep penetration into the wood structure and protection against drying out. Vegetable oils do not interfere with the natural moisture exchange of wood, thereby reducing the risk of swelling and shrinkage.
Safety for health and the environment
As part of Osmo countertop oils there are no biocides and preservatives that adversely affect human health. The dried oil does not pose a danger to humans, animals and plants and complies with the German standard "Safety in case of possible contact with skin and saliva."
Osmo's strategy is to manufacture and sell products that are safe both during production and in operation.
Usage
Designed to protect wooden furniture, solid wood worktops and laminated wood ( kitchen countertops etc.). For indoor use. For tropical hardwood products, 1101 Klarwachs Hardwood Wax Oil is recommended.
Number of layers
When working with a brush, 2 coats are recommended. When applying oil with a rag or napkin, three to four layers are necessary.
1 layer is enough to update the coverage.
Preparatory work
Osmo paints and oils must be applied on a clean and dry surface (wood moisture content should not exceed 20%). At temperatures close to zero degrees and below, work is not recommended. This can lead to a significant increase in the consumption of Osmo paint and oil, as well as to the fragility of the coating.
During the initial treatment of a wooden surface with Osmo paints and oils, it is recommended to apply them on a clean, uncoated surface. paintwork materials wood. It is also possible to apply on an old open-porous coating, while it must be cleaned of dirt and dust. Old wood coverings ( conventional paints and varnishes) must be removed.
small cracks and damage to wood, if desired, level with wood fillers.
Sand the surface of the wood carefully, starting with a rough (coarse-grained) sandpaper and moving on to smaller ones. final grinding it is recommended to produce paper grain P100-150 - for the floor (walls, ceilings) and P180-320 - for furniture.
Immediately before applying the oil, it is required to remove wood dust and dirt, first with a broom, and then with a vacuum cleaner.
In rooms with high humidity wood susceptible to blue damage (spruce, pine, etc.) is recommended to be treated with Holzprotektor water-repellent impregnation. Then apply a top coat of any Osmo interior paint.
Application
Oil with wax for furniture and countertops is already ready for use. Stir thoroughly before starting work! Dilution is not recommended! This can lead to the fragility of the coating and reduce the degree of protection of wood.
Application with a natural bristle brush or a lint-free cloth, in a thin layer along the grain of the wood.
Leave to dry for 10-12 hours. Ensure good ventilation of the room.
Apply the second layer in the same way as the first and leave to dry for at least 10-12 hours.
When tinting furniture and countertops, use a transparent paint based on oils and waxes (colored oil) Dekorwatches Transparent(see instructions for use) then apply 2 top coats of oil for countertops according to the technology described above.
Drying time
It takes 8 to 10 hours to apply the next layer or the possibility of using a surface treated with oil for furniture and countertops. In the process of drying the oil, it is necessary to ensure the ventilation of the room, because. the oil dries out during the oxidation process and for this it is important to provide good access to oxygen.
Surface repair and restoration
No sanding is required to restore a surface coated with oil for furniture and countertops!
Clean the wooden surface from dirt and dust and apply oil in one layer. Let the new oil dry well. Polish as desired.
Best before date
Osmo paints and oils have a shelf life of more than 5 years when stored in a tightly closed container (without oxygen) and in a dry place. Osmo paints and oils are frost resistant! At temperatures close to zero degrees and below, Osmo paint and oil thickens. In this case, before use, it is necessary to keep the oil at room temperature within 1 - 2 days.
I want free
Paola AF catalog
I want free
OSMO catalog Found cheaper?
