How to make a folding table in the garage. Folding compact table in the garage. We assemble a workbench for the garage with our own hands

Dear visitors of the site "Visiting Samodelkin", in the material presented, you will be shown how to independently make a durable and reliable workbench in a workshop or garage.
Well, you can’t do without a workbench in the garage, you always need to repair, disassemble, assemble something, and where to do it if not on a workbench, the vise is screwed to the tabletop and all the necessary tools are always at hand.

The workbench is designed for metalwork, has a metal frame made of a corner and a professional pipe, as well as convenient drawers for storage small tool, bolts, nuts and other useful little things, there are also convenient shelves, and the tabletop itself must be finished with iron 1.5-2 mm thick. In addition, a tool panel is attached to the back of the table, which is also very convenient because the necessary will hang right in front of you, it is also desirable to bring a socket or tee to the panel so that you can connect a power tool.

Need to protect metal surfaces from corrosion, namely to cover them with an anti-corrosion compound and paint, so the table will always look neat and will serve you for many years.

And so, let's look at what exactly is needed to make a workbench?

materials
1. professional square pipe
2. corner 40x40 mm
3. metal sheet 2mm
4. plywood
5. metal screws
6. paint
7. impregnation for wood
8. wood screws
9. anti-corrosion coating
10. metal plate
11. furniture guides for drawers

Tools

1. welding machine
2. grinder (UShM)
3. drill
4. tape measure
5. hacksaw
6. jigsaw
7. brush
8. hammer
9. screwdriver
10. ruler
11. marker
12. level
13. corner
14. sandpaper
15. grinder

Step-by-step instructions for creating a workbench with your own hands.

Assembly and installation of this table in a garage or workshop is a serious and responsible matter. When making it, you must first of all know that it must be stable and withstand a load of about 200 kg, check the level for distortions, because it is desirable that the table eventually turn out to be even. Before starting work, you should study the drawings and diagrams provided by the author.

After that, the master welded the basis for the future workbench from a professional square pipe.

The places of welding were carefully cleaned with a grinder (angle grinder)

I welded metal corners to the back of the table, a tool panel will be fixed on them.

Then the area under the countertop is reinforced, namely, additional pipes are welded.

The tabletop itself will be made of a 50 mm board, and for its placement, the author made a frame from a corner.

After that, all joints must be reinforced with metal plates.

Spacers are welded into the corners.

Various loads will act on the workbench: weight, shock, vibration, etc., at the creation stage, all these moments must be taken into account and reinsured.

For the convenience of storing small tools, spare parts, bolts and nuts, the master made special plywood boxes.

The surface of the workbench is painted with paint.

Furniture guides are screwed onto the drawers on the sides.

The tree will take some of the load from shock, vibration and weight.

The resulting surface should be well polished, the master used a grinder (angle grinder) with a grinding wheel for this.

In order for the tree to serve for a long time and not rot under the metal, it should be treated with a special impregnation for wood.

After that, a sheet of metal 2 mm is cut to the size of the tabletop.

The metal must be treated on both sides with an anti-corrosion compound so that the metal sheet does not rust.

The drawers are installed in the cavity of the table where the master has mounted a slide under each drawer.

Thus, the drawers will be conveniently opened and closed.

Each drawer has a handle on the front for easy opening.

On the finished workbench, for example, emery can be placed by bolting it to the table top.

At the bottom there are open shelves where you can store power tools.

It is very convenient to work when you have everything at hand and collected in one place.

You can also install a vice on the workbench, which is also screwed to the tabletop with bolts and tightened with nuts.

Initially the workbench was used exclusively when processing wood, and its main task was to fix the workpiece for emphasis in the use of tools. To do this, they cut holes of various shapes along the edge of the tabletop, hammered wedges, inserted combs and chocks for emphasis or as guides. Such a workbench was called classical.

The simplest design of a workbench looks like this:

supporting frame on legs;
thick tabletop, with a powerful surface;
additional shelf under the tabletop for storing tools and fixtures;
shelves or drawers that increase storage space.

Interesting: Now popular computer game Minecraft, which invites players to create virtual wood workbench from A to Z, in any modification.

Improvement of tools, the appearance of electrical equipment affected workbench modifications. And the manual processing of a new material - metal has created a completely the new kind desktop for locksmith work. So by appointment today workbenches are distinguished:

carpentry;
carpentry;
locksmith;
universal.

Do-it-yourself table in the garage - photo options:

The working table in the garage can be designed for a different number of employees, or zoning places.

In this case, workbenches are distinguished:

single;
double;
multi-seat.

The addition of the capabilities of a specialized workplace has given rise to its varieties:

folding;
mobile (on wheels);
folding wall-mounted workbench;
workbench cabinet (with sections for tool storage).

According to the material from which the work table for processing materials is made, there are:

wooden (made of durable wood);
metal (welded structures);
combined (the wooden base is reinforced with a metal sheet on the tabletop, supplemented with metal combs, screws with threaded threads; the metal case is equipped with wooden shelves and boxes).

Important: The metal parts of the workbench need an anti-corrosion coating, and the wooden parts need an antiseptic impregnation.

What does it look like homemade workbench for the garage, watch the video:

What kind of desktop does a car enthusiast need?

There is not much free space in the garage, so it is important to decide for what goals it will be installed:

minor repairs and minor plumbing work;
a permanent range of work related to home maintenance, or your hobby;
amount of work in car care for full release from the dependence of SRT.

In any case, the limited space will require a garage workbench:

compactness;
sustainability;
universality;
illumination;
performing a storage function;
safe connection to the power grid;
15 cm above the floor for high-quality cleaning.

Garage workbench dimensions(standard - 6x4) cannot exceed 60 cm in width, and 1.5 m in length. The height of the workbench in the garage is determined based on the height of the owner - to the middle of the hands in a standing position. The best choice will be - a metal structure, since most of the work in car maintenance is metalwork. For the greatest stability, it is recommended to support the supporting frame on 6 legs, or even 8.

Location selection- also the specifics of a garage workbench: after all, it should be convenient to work on it with a car standing in the room. And, at the same time, it is recommended to remove it from vehicle not less than 1 meter. With a purchased copy, all these subtleties are difficult to take into account.

We make a workbench for the garage with our own hands - drawings:

If you make a workbench with your own hands, then which one is wooden or metal?

Wooden - easier to manufacture, but ...

The choice of species again determines special purpose: faster and for simple operations - it will be acceptable and wooden frame from a powerful board (40x80mm) or timber (50x100), assembled into a rectangular structure according to standard dimensions, using self-tapping screws or nails. For structural reinforcement use wooden spacers between the legs (top and bottom). The lower ones (at 15 cm from the floor) can become the basis of a storage shelf.

The tabletop is assembled from a planed tongue-and-groove beech (oak) board or two sheets of moisture-resistant plywood 18mm thick, glued together and sheathed along the edge. For special strength the surface of the tabletop is upholstered with a metal sheet 5 mm thick, making a side from the side of the wall.

However, if you make a wooden workbench in the garage with your own hands, then this option has its drawbacks:

it is not designed for a large force effect;
it is difficult to place several necessary devices on it at once: for drilling, sharpening, heavy bench vise;
the wear of the frame made of wood is short-lived;
the tree deteriorates from spilled oils and paint, fills the pores and cracks with metal dust and shavings;
the risk of fire remains.

See how to make a workbench in the garage with your own hands - photo:

Metal desktop - the right choice

The advantages of a metal workbench for a motorist:

compactness of all structural elements with increased reliability;
the ability to withstand any force;
additional weight for stability;
the ability to take into account the features of the room, making the workbench mobile, folding, folding, shortened;
increased strength of the welded structure;
tabletops can be completely made of metal with a 3-sided rim;
table top does not have sharp corners(for safety);
it is completed with 2 vise and clamping screw;
holes for clamps and stops are provided;
allows you to perform sawing and cutting of metal, turning and grinding;
the ability to fill the space under the countertop with any storage devices (shelves, drawers, organizers, grids);
secure fastening of drawers and shelves;
metal shavings do not clog into slots;
it can be processed and wooden parts;
safety in conditions of fire risk;
saves the effort of the worker;
This table is easy to maintain.

For your information: A metal garage workbench is a hit in specialized stores, where only price and design improvement are of decisive importance.

But the craving for creativity leads along the path of one's own experience.

A useful video on how to make a do-it-yourself garage locksmith workbench:

How to make a metal workbench for a garage?

Algorithm:

Choose a place, taking into account all the requirements for placing a car in a garage.
Prepare solid foundation for installation.
Take measurements of the installation site.
Create a sketch of your idea with all the details and improvements.
Prepare necessary material and tool.
Prepare structural elements.
Consider the technology of assembling and strengthening the frame.
Collect product.
Cover with a primer and a protective layer.
Conduct functionality and security testing.
Fix the necessary equipment on the tabletop.

Material required for work:

metal hollow profile (4mm) for legs;
metal equilateral corner (50x4mm) for drawers, prolegs, guides for shelves;
sheet metal with galvanization or stainless steel for countertops (5 or 2mm);
metal strips for edging;
grooved board (50x150mm) for wooden tabletop with metal upholstery (as an option);
self-tapping screws;
primer and paint for metal.

Tool required for the job:

level, tape measure;
drill;
Bulgarian;
welding machine.

Assembly technology:

to assemble the desktop, an integral welded connection of all metal parts is used (sides as the bases of the table top, legs, jumpers, rectangles for stability on the ends of the legs);
horizontal and vertical elements for greater strength are equipped with permanent slopes;
the tabletop is made from a single sheet of metal or a plank shield upholstered with 5mm galvanized iron; in the first case, the tabletop is welded, in the second, it is screwed with screws to the collets and additional metal strips;
for the installation of shelves and boxes, a corner is welded to the racks as guides (boxes can be made of either metal or wood); the tree is treated with an antiseptic;
rectangles welded on the ends of the legs increase the stability of the workbench and allow it to be fixed to the floor.

Do-it-yourself metal workbench in the garage - photo drawings:

Last tip: A do-it-yourself (metal) garage work table should only be done if you are familiar with the art of welding and the safety rules for it in practice.

Most car owners use the garage as a place to store the car, preferring to repair cars in special services. However, there is a category of citizens who love to engage in a car on their own, repairing and upgrading it. To do this, you need a workbench in the room, on which it is convenient to repair various mechanisms of the vehicle. How to do folding table V own garage so that it does not take up much space, we will figure it out below.

The folding table has many features that distinguish it favorably from the usual design:

A folding table installed in the garage does not take up free space and unfolds only when necessary.
It performs various functions that are problematic to implement without it. On a folding table in the garage, you can fix a broken part, have lunch and spread out the drawings or diagrams needed when repairing a car.
Fits beautifully into the interior.
Can be assembled by yourself.

Note! Next to the folding workbench, you can organize a rack with tools, which will increase the convenience of work.

Material selection

The folding table is made from the following materials:

metal;
tree;
combination of metal and wooden parts of the structure.

The advantage of wooden folding tables made in the garage with your own hands:

low cost;
the tree is easily and quickly processed, taking desired shape. For creating simple designs no special tool required;
wooden products give the atmosphere home atmosphere, diluting a large number of metal that surrounds you indoors.

A metal folding table mounted on a wall in a garage has the following advantages over wooden structures:

the durability of the metal is much higher;
sheet metal is harder to damage.

Metal cons:

hard to do alone
special tools are required;
some tools require some skill to use. For example, it is not enough to have a welding machine, one must know how to handle it;
more expensive than wooden models.

Many owners prefer to combine materials. This lightens the overall weight of the structure and reduces the final cost.

Design

Designing is the main and most difficult part in creating a folding table in the garage with your own hands. Without a well-prepared drawing, which indicates the main structural elements, you will not be able to properly purchase materials and prepare the necessary set of tools. The drawing is made independently or downloaded from the site and subsequently upgraded to the needs of a particular owner.

Important! Do not neglect the design stage, otherwise, after assembly, it will turn out that the design came out inconvenient and only gets in the way, instead of being useful.

Required Tools

For wooden structures you will need:

wood saw;
hammer;
nails;
screwdriver or screwdriver;
screws;
roulette;
corner;
marking pencil.

While creating metal model you will need:

welding machine;
Bulgarian;
chalk for marking;
screwdriver;
a set of screws;
corner;
roulette.

Depending on the complexity of the selected drawing, an additional set of tools may be needed.

How to make a folding table in the garage with your own hands

The folding workbench is made according to the following algorithm:

collect the countertop;
we make supports that will support the structure in a disassembled state;
at the height of the legs fasten to the wall wooden beam or metal corner. Loops will be attached to it, uniting the timber and the countertop into a single structure;
fix the supports.

Note! Don't forget to equip working area around the workbench, bringing electricity to it and installing competent lighting.

Everyone knows that a garage is necessary in order to put a car in it. However, many car owners use this room as a warehouse for unnecessary things, and if space permits, they remake it into a small workshop. Therefore, appropriate equipment is installed in it - racks, shelves and a workbench. The latter is a multifunctional desktop used for processing various materials, performing plumbing, assembly and electromechanical work. Workbenches for the garage can be made by hand.

Design features of the workbench

The garage workbench is often compared to desk, because it makes it easy to carry out a variety of tasks. and enables everything necessary tools keep on hand. Thus, in addition to the countertop, it has a large number of shelves and drawers. The design of the workbench consists of the following elements:

Be sure the workbench should be well lit. For this install a stationary rotary lamp that plugs into an outlet. It can be equipped on the wall, near the workbench, but it is much more practical to build electrical equipment directly into it. In this case, there will be no problems with electrification if you need to install the table in a new place.

Garage workbenches

Types of workbenches

These tables are of two types:

carpentry;
metalwork.

The carpentry is a metal or wooden frame, the tabletop of which is made of wood. It is best not to process metal parts on it, because traces of engine oil remain on its surface, which are very difficult to get rid of. In addition, metal chips often damage the surface of the table, as a result of which it will not last very long.

To work in the garage it is best to use a locksmith workbench, which is a universal model. Its tabletop is metal, therefore it is used for processing wooden and metal parts. A wide variety of actions are performed on it: sawing, cutting, sharpening, grinding. In addition, this design is much more stable than the joinery, which is very important for working with metal parts, since during work there is often strong pressure on the surface of the countertop. Tools are stored in shelves that are specially provided for this.

Material used

To make a workbench in the garage with your own hands, two materials are used: wood and metal. The difference between these designs will be in reliability and resistance to various force and mechanical influences. In this regard, a metal workbench will significantly outperform a wooden one. There are other points that should be mentioned:

It is difficult to make a metal structure with your own hands, because will require welding work and you also need to have skills in working with metal. It is also quite difficult to process an iron billet. Therefore, to make a desktop of this type with your own hands, you will need special equipment and specific knowledge.
A tree is a completely different matter. To make a wooden workbench for the garage with your own hands, only a standard set will be needed home instrument - grinder, screwdriver, electric jigsaw, hammer, etc. You can even use only hand saw, but the work in this case will become a little more complicated.
If we take into account the operational and technical aspects of a desktop made of a particular material, then it is necessary to allocate a lot of weight. metal product and rather low strength wooden workbench. The ideal option it would be a combination of these two materials in one product, for example, make a workbench from wood, and cover its countertop with a thin layer of iron. In this case, even the use of a vice and other similar devices will not be able to harm him.

Thus, combination of materials is ideal solution for making a workbench to the garage with your own hands. However, if the desktop will not be used too often, but from time to time, then it is best to do without completely wooden structure.

Preparatory work

Before you start making a workbench for a garage with your own hands, you should decide what dimensions and configuration the future design will have.

When equipping a garage with your own hands it is very important to choose the right place where the workbench will be installed. The best option will be considered part of the garage where there is good lighting and equipped electrical sockets. It is necessary to take into account such a moment as the direction of natural light. The light should fall from the left side or straight ahead. In this case working surface will always be illuminated.

The length of the tabletop should be such that it can easily accommodate the tools and large parts that are required for the job. Its width should not be more than 50 - 60 cm. This allows you to easily reach the opposite edge. One side can be equipped for electrical cutting tool: circular saw, jigsaw, etc. For this purpose, the plank is fixed in such a way that it protrudes 200 - 300 mm beyond the edge of the workbench.

Also, before you make a workbench in the garage with your own hands, you need to clarify one more parameter - its height. The convenience of carrying out the work depends on how correctly it will be determined. To determine the height, you need stand up straight, bend your arms at the elbows and mentally lean on on an imaginary table. Distance between floor and arms folded will be the ideal height for future construction.

Necessary tools and materials

To make a workbench in the garage, you will need the following tools:

a grinder with a grinding disc and a circle for cutting metal;
level;
screwdriver;
drill;
welding machine and electrodes;
roulette;
jigsaw for cutting plywood.

Materials:

corner 4 mm thick;
steel strip 4 mm thick;
steel sheet required for the manufacture of holders for boxes 2 mm thick;
plywood for the manufacture of back, side walls of the table and drawers 15 mm thick;
screws;
anchor bolts;
square pipe 2 mm thick;
steel sheet to be used for the countertop, 2 mm thick;
wooden boards for countertops 50 mm thick;
guides for drawers;
self-tapping screws for metal;
paint for metal and wood.

The design made of these materials will be reliable and very durable. Planks will be used for niches and shelves, and steel strips will be needed to create rims on the table surface.

Assembling a workbench for a garage with your own hands

After completing all preparatory work start assembling a workbench for the garage with your own hands. For this, 4 supports made of a steel corner are taken. The legs for the desktop should be the same size. In the upper part they are fastened together with the help of a corner and welding. Thus, if you look at the structure from above, you should get a rectangle measuring 100x50 cm.

The same action is done from below. At a height of about 15 cm from the floor, corner trims are welded, which will subsequently provide additional rigidity the whole structure. If such a need arises, then additional racks can be welded, which will be needed to mount shelves and drawers.

As soon as the frame is ready, they begin to make the cover of the workbench. Edged oak boards are taken, 25 cm wide and 5 cm thick. The length of the boards is determined based on the calculations made earlier. Boards are laid on top of the frame and very tightly fixed to each other. For this, along the perimeter of the upper connecting elements frame make a series of holes for the bolts.

Holes are also drilled in the boards of the countertops through which they will be attached to the frame. From the top too need to drill holes to fit the bolt heads.

After the cover is fixed, proceed to its sheathing with metal. For this, galvanized iron is used. A metal sheet of suitable size is fixed to the surface using ordinary self-tapping screws. You should be aware that when cutting, burrs can form on the metal edges, so for safety, they should be processed with a file.

On this, work on the manufacture of the simplest workbench for the garage is considered completed. It is quite simple to make such a design with your own hands. For better stability on workbench legs metal corners or rectangles are welded from below, which allow you to screw the structure to the floor.

Thus, the workbench in the garage is very convenient fixture. It can be equipped with additional drawers, shelves and tool holders. A special screen is screwed to that side of the structure, which is closer to the wall, which will be used to place pliers, screwdrivers, wire cutters, etc. on it. A do-it-yourself workbench is often no worse than a purchased one.

The garage is a multifunctional space. In it, you can install and repair cars, design and make various things and mechanisms with your own hands.

If a person likes to spend time in the garage, doing repairs, you need to properly equip your workplace. A workbench is a multifunctional desktop that can be used to process various materials, carry out metalwork, electromechanical and installation work. Also in the design of the workbench, you can think of shelves and drawers to store tools and other items.

Types of workbenches

Workbenches are made for processing metal (locksmith) and wood (carpentry). The designs differ in the material of the countertops. For locksmith models, the countertop must necessarily be metal, since working with metal involves the use of engine oil and other liquids that are on wooden surface may leave traces.

Also, when processing metal parts, effort is often required, the use of a sharp tool, so it is best to equip the workbench with a metal worktop.

Carpentry workbenches are designed to work with wood, so they are not as durable and functional as locksmith models.

Workbench design

If the design of the desktop in the garage is made by hand, then first of all you need to carefully consider every detail, figure out where the tools will be placed, what work will be carried out on the workbench. The model of the table in the garage depends on this.

Standard models are often equipped drawers which can be made from wood or metal. Also, the design of the table can be supplemented with shelves, a power shield for hanging tool which will always be at hand. But most importantly, the workbench must be stable, durable and reliable.

Tool

Bulgarian with a circle for cutting metal and a grinding disc.

Welding machine and electrodes. Overalls and protective devices for welding.

Screwdriver.

Jigsaw for cutting plywood.

materials

Corner 50 mm by 50 mm, thickness 4 mm, length 6.4 m.

Square pipe 60 mm by 40 mm, thickness 2 mm, length 24 m.

Corner 40 mm by 40 mm, thickness 4 mm, length 6.75 m.

Steel strip 40 mm wide, 4 mm thick, 8 m long.

Steel sheet for countertop 2200 mm by 750 mm. Thickness 2 mm.

Steel sheet for making drawer holders. Thickness 2 mm.

Wooden boards for countertops. Thickness 50 mm.

Plywood for the manufacture of drawers and for the side and back walls of the table. Thickness 15mm

Guides for drawers.

Screws for assembling plywood boxes.

Self-tapping screws for metal.

Anchor bolts.

Paint for wood and metal.

The workbench that will be made from these materials has quite impressive dimensions: the table is 220 cm long and 75 cm wide. different ends vise table and, for example, emery or other tool.

The first step in the manufacture of a workbench is cutting the available material into elements. profile pipe intended for the manufacture of the frame. The steel corner is designed to create stiffeners. It is cut into pieces and a power frame is formed from it. Also, a steel corner is needed for edging the tabletop on which the boards will be laid.

The steel strip is intended for the manufacture of guides on which the side panels will be attached. Also, this material will go to the brackets for attaching boxes and plywood.

Table drawers are made of plywood.

The second step is welding power frame workbench. The elements of the countertop are welded first - 2 pipes 2200 mm long and 2 pipes 750 mm each. The frame must be welded so that another frame of corners can be welded on top of it, into which the tabletop boards will be laid. To reinforce the countertop, it is required to weld a few more after 40 cm steel pipes, which will act as stiffeners.

Then 4 side legs are welded along the edges of the workbench. Their length is 900 mm. Power jumpers are welded between the legs, strengthening the structure.

After the base frame is ready, you can start welding the structure for the boxes. To do this, square frames are formed from steel pipes, which are welded to the tabletop on both sides of the table. Frames are reinforced with longitudinal stiffeners.

The third step is to make a frame for the countertop. Two steel corners, 2200 mm long and two more corners 750 mm long, are needed to make the frame. The structure is welded so that wooden boards lie inside it.

The frame from the corner is laid on the frame of pipes and welded. It turns out a reinforced tabletop, 8 cm high with internal stiffeners.

The metal frame of the workbench is almost ready, it remains to weld the crate of the panel for attaching the tool. This requires one metal corner with a length of 2200 mm and 4 corners with a length of 950 mm. Two elements are attached to the sides of the structure and two in the middle, for reinforcement. The toolbar is welded to the worktop.

The frame of the corners and pipes is ready. You can start strengthening the structure. Brackets are welded to the sidewalls of the table, which are cut from a steel strip. A total of 24 parts are needed. A hole is drilled in the middle of each bracket. Through these holes, the side and rear walls plywood tables will be attached to metal frame workbench.

The fourth stage is the manufacture of drawers for the table. Plywood is cut into blanks, which are twisted with screws. The number of drawers depends on what will be stored in the table. If small parts, then you can build 3 boxes, if large - then 2. It all depends on personal preference.

Drawers can be arranged on two sides of the table, can be mounted on one half retractable structures, and on the second - the usual open shelves.

After the drawers are assembled, metal strips with holes need to be welded between the sides of the drawer compartments. To these holes inside skids for guide boxes will be attached.

The fifth stage is laying the boards in the tabletop frame. Boards with a thickness of 50 mm are cut into blanks of a certain length. If a long board is available, then you need three blanks 245 mm wide and 2190 mm long. If there are no long boards available, then you can lay the blanks across the table. For this purpose, wood 205 mm wide is cut into 10 blanks 740 mm long.

Before laying the wood in the table frame, it must be treated with an antiseptic solution. This will protect the material from rotting and damage by beetles.

Then, without fail, it is required to paint the entire metal structure workbench. This will protect the metal from corrosion. It is best to use a weatherproof and anti-corrosive coating option. Be especially careful when painting welding seams. Drops of metal and bumps are recommended before painting work clean thoroughly. This can be done using an angle grinder with a metal grinding disc.

After the structure is dry, you can start laying the boards on the countertop. They should not be driven too tightly into the frame. This is due to the fact that the tree tends to expand and shrink with a change in temperature and humidity. It is better to leave a small gap of a few millimeters between the boards. The surface of the wood needs to be sanded, this will simplify installation. sheet metal on top of the tree. Boards around the entire perimeter of the table are screwed to the frame with self-tapping screws.

The sixth stage is the fastening of the upper steel sheet. It can be welded to the countertop, but there is wood inside the structure, which can ignite during the welding process. Therefore, it is best to attach the steel sheet with hidden self-tapping screws to wooden planks. Previously, the metal must be painted on both sides with a rust converter. This covering material looks like a transparent paint coating, is easily restored and reliably protects the metal from rust. You can also paint the metal countertop with the same paint that covered the frame. It will be beautiful, but over time, the paint may scratch and the table will not look too new.

The last step is to install the boxes on the rails and fasten the plywood to the side walls , shelves and power shield in front of the table. This work can be called finishing workbench. After work with plywood is over, it must be coated with a compound that will protect the material from exposure environment. Also, do not forget about the design of the power shield for tools. You can attach special hooks or screws to it, to which the necessary things will be hung.

In order to make it convenient to work at the workbench, you can attach a special lamp with a bending stand to the power shield. In this case, you can optionally direct the flow of light to the right place.

Video - The process of making a workbench

Installing a vice on a locksmith's workbench

The vise is an indispensable attribute locksmith workbench. It is not recommended to attach a clamping tool weighing several tens of kilograms to the tabletop itself. It is best to place a metal gasket between the metal of the table and the tool, 1 cm thick. It is required to drill holes for the anchor bolts in the gasket. Then, in the same places, drill holes in the countertop of the same size. The whole structure is fastened with anchor bolts.

Safety requirements for a homemade workbench design

If the area of \u200b\u200bthe garage is not too large, then you can make a smaller table for plumbing work with your own hands. But, it is worth knowing that the whole structure must be stable, not sway or budge with little effort.
The workplace should be organized in such a way that nothing interferes with a person. When working with a vise, all unnecessary tools should be removed from the countertop.
The corners and protruding parts of the table should not be too sharp and have cutting edges.
After repair work behind the workbench, you need to clean the workplace from metal shavings, drops of oil and other materials.
If a homemade workbench is made correctly, then it can easily withstand a load of 200 kg.