Cutting out plywood with a jigsaw according to drawings - detailed instructions. Cutting from plywood DIY crafts from plywood drawings

Various kinds Crafts made from plywood and wood, made by skilled craftsmen, are highly valued all over the world, causing universal admiration. Undoubtedly, carving is creativity and art, but you can certainly master it with effort and constantly honing your skills. This optimal hobby related to wood and plywood will not require too much free time from you and equipment that is not very expensive. Of course, this means carving plywood using jigsaws!

Openwork carving

It is rapidly gaining popularity: who doesn’t want to make an excellent piece of decoration for themselves, decorating their home, furniture, and creating an artistic ambience! Cut-out products of different thicknesses are optimally integrated into many existing decorative styles, and we get, for example, frames for photo cards with ornaments, words, individual letters, figured shelves made with jigsaw carving on plywood. In addition, such creativity is an action that is accessible to anyone interested in the process, even a beginner. You just need to get an idea of “how it works.” And you can start creating!

Using a hand jigsaw is quite easy

Video to get started:

Choose this material made of wood for the following reasons:

moisture resistant;
temperature changes do not have a negative impact;
quite low cost;
ease of learning to cut with a jigsaw;
low weight of products.

It is also necessary to choose plywood of the 1st and 2nd grades for crafts. The rest are not suitable for creativity: the surfaces have cracks with knots and chips (unless they can be used for internal substrates). Birch plywood (3-10 mm thick) is most suitable for cutting.

At the present time, this material is divided into a fairly large number of subspecies - each for specific purposes.

Experts and folk craftsmen advise using sheets produced using a urea-formaldehyde composition. Such material is marked “FC”. This type of plywood can be bought “clean” or coated, for example, with varnish. It is most convenient to transfer the drawing to untreated plywood sheets for cutting with a jigsaw.
Plywood marked “FOF” is intended for furniture production, and is often produced over 12 millimeters in thickness.
The FB brand was originally developed as a boat material, which is why its cost is high (but if it is possible to use it, then it is suitable for cutting with a jigsaw).
But masters do not recommend purchasing FSF. Although attractive in appearance, it is toxic because it is made using a composition of phenolic resins.

Produced grades of working material

Types of carvings on plywood

It is divided into:

Openwork,
Patterned, on a painted sheet of plywood,
Ewing,
combined method.

What additional materials and tools will be needed?

Stencils and drawings with drawings for work. You can come up with them yourself or copy them on the Internet.
Carbon paper to transfer patterns and lines according to the drawing;
Glass paper and sandpaper, a set of files - for grinding parts;
Joiner's (optionally casein) composition for gluing parts;
Transparent varnish – for coating;
To make holes inside the material to thread the blade through, use a drill and an awl.

Before starting cutting with a jigsaw, carefully sand the material with glass paper, and only then transfer the patterns according to the drawing.
Transfer elongated shapes of designs with narrow elements onto plywood so that they are located along the fibers of the “face” of the material.

Artistic cutting with a jigsaw: drawing, stencil and work

Let's get to know the devices

A jigsaw is a toolkit that is designed for working on different contours. The device includes a blade equipped with teeth small enough to cut the working material, practically without forming burrs or chips.

Manual

The “founder” of the genus is, of course, the manual jigsaw. Everything ingenious is simple: a metal U-shaped arc, and a working blade is stretched between the ends, which is secured with clamps. They hold the files during operation, and their tension is also adjusted with their help. Handle for convenient work located on one side of the frame. The tool clamps can be rotated, thereby creating a different plane for carrying out work, providing opportunities for carving plywood with a jigsaw of increased complexity.

When creating with the help hand-held device Maximum care must be taken: the design is quite fragile, and with intense pressure the blade sometimes breaks and needs to be replaced. Every novice craftsman should stock up on additional working files.
When working with a jigsaw, it is convenient to use an auxiliary board: it protects the table and solves problems with the convenient location of the plywood workpiece.

Jigsaws

This device operates using electricity. It is a housing where the mechanism is located, and the control handle is also located there. The sawing element is located at the bottom of the device at the front. The blade is protected, and this allows you to cut along the contour very smoothly, without deviations. Professional models of equipment have many attachments that greatly facilitate the work process, for example, leveling the edge of the material. Jigsaw blades can also have teeth that vary in shape and size. They should be selected in accordance with the material for the saw to avoid damage to the plywood sheets during operation.

Household electric jigsaws for non-production purposes are usually of low power (from 350 to 500 W). For beginners, this is the most common option when you are just learning to cut out crafts and figures from plywood (usually of small thickness). It is quite safe to operate such a device, especially when it is equipped with protection.
A professional jigsaw is intended for industrial purposes, has a power of more than 700 W, high speed and cutting accuracy. It can cut sheets over 10 cm thick, aluminum, and thin steel.

Video: simple jigsaw:

Fraser

Sometimes used for carving this device. It is a type of special hand tool, with the assistance of which living conditions can be performed different types wood and plywood work. However, working with it requires some skill; but craftsmen who deftly handle this equipment can create real, highly artistic masterpieces of folk art.

Preparing the stencil

Drawings for creative works there are different sizes, depending on the scale of the products being manufactured. For example, for diagrams of a shelf or a piece of furniture, for a three-dimensional toy, you should take a sheet of Whatman paper in A1 format, a roll of wallpaper left after repair may also be suitable, and for small figures (such as souvenirs) we take office paper(A4 or A3 format).

Using a marker or pencil, we draw the contours of the future object on the surface of the paper, adhering to the specified dimensions. Templates are available in the public domain in a wide range; we choose the appropriate one (for beginners, as a rule, it is not too complicated). Or you can come up with your own options for cutting with a jigsaw and then transfer it to a paper base.

Then we transfer the images to the surface of the working material (plywood, boards). To do this, cut out a figure from paper, apply it to plywood and carefully trace along the contour with a pencil. The lines must be precise and even. If necessary, correct it by erasing it with an eraser.

The contours are applied “from the rear” of the material so that no remnants of the drawing are noticeable on the finished form. The internal areas can also be shaded so as not to cut off an extra piece, thereby indicating an inviolable fragment.

Example drawings

Snowflake

How to carve plywood

Working with the device will not be difficult if you properly prepare for the creative process.

The work area must have good lighting;
The working plane must be protected from damage. You can, for example, lay plywood sheet or cover it with film;
All necessary tools and spare blades should be prepared in advance. And we can begin.

The first step should begin with drawing the inner outline of the drawing or drawing. To do this, you need to make slots into which the blades of the device will be inserted. Usually, when cutting large contours, there is no problem, but in small remnants, working with a jigsaw from the inside can cause chips, burrs or cuts. You must act very carefully.

Working with a jigsaw

How to saw with a hand jigsaw

Secure the piece of plywood with one hand and hold the cutting jig by the handle with the other.
Start moving along the drawn contours, moving the jigsaw up/down. This should be done around the perimeter of the drawing.

Job with a hand jigsaw

As you can see, there is nothing super complicated in this work. And you will acquire a real creative hobby by learning how to operate these devices.

How to cut plywood with a jigsaw

Sawing plywood with an electric or manual jigsaw is undoubtedly a creative process. And you will be able to create decorative items of various styles with your own hands: from fairy-tale cartoon characters for children to decorations for furniture and home.

Photo gallery of examples of work

An electric jigsaw is used by home craftsmen to create beautiful products made of plywood and wood. Such crafts are used for a variety of purposes. They can be decorative or serve as household items. Every home craftsman who is interested in this activity should know the features of working with the tool.

You should learn more about how to use the “miracle jigsaw” and what can be cut with it.

Subtleties of working with a jigsaw

A jigsaw is a universal device that is used for cutting shaped products from various materials. All you need is to choose the right canvas. It is important to understand how to cut out shapes of complex shapes. Many novice craftsmen need to figure out how bevels on boards and various components of crafts are made. Electric jigsaws work best when cutting wood coniferous species. However, the thickness of the elements from which cutting is performed should not exceed 3.8 cm.

Blades that will be inserted into a jigsaw quite often bend and leave beveled edges. A straight cut is usually achieved with a well-sharpened blade. However, you should not put too much pressure on the tool while working.

You should first start the saw at the highest speed, and then select the blade angle. This will result in fewer chips. In materials that are highly brittle, it is necessary to drill holes. This will allow you to saw off the workpiece without unnecessary risk. As a result, there is no chipping of the part.

To ensure fast cutting, coarse blades should be used. However, it should be taken into account that when choosing such consumables, it will be more difficult to sand them later. Blades for electric jigsaws are made in such a way that the cut is made when the blade moves upward.

Choosing the Right Blade

Choosing a blade for an electric jigsaw is a major consideration when cutting wood and plywood. Often a jigsaw lies idle in a home craftsman's household. However, when you need to make a complex pattern, this tool is more necessary than ever.

Quite often, an electric jigsaw is used as a tool for cutting a hole in a tabletop or during installation. kitchen sink. This tool is also used for cutting metal. When using other saws, it is often impossible to complete the assigned tasks. A jigsaw is a universal device. Both beginners and experienced people can work with it House master. As a result, you can get excellent results using different materials- plastic, wood, plywood.

How to use the tool

A jigsaw is used for a variety of tasks. Its main function is to cut curved shapes in wood products. Getting smooth curves using this tool is quite easy. The base of the tool should be kept level on the workpiece. When the preparation is completed, you can begin the main work. Then the engine is turned on and the device is slowly moved along a pre-marked line, at a distance of 2 mm from it. Fine sanding is done later.

The saw should be moved at such a pace that the blade cuts the material easily without any deflection. A jigsaw works great when cutting boards crosswise. A stop must be used if a perfect cut is required. Bevel cuts are fairly easy to make using a jigsaw. Before work, it is necessary to firmly secure the workpiece.

If an oblique or vertical cut is performed, the distance between the blade and the fence is set to the same as on circular table. If you need to make a precise and long cut, it is difficult to work with a jigsaw. In this case, first use circular saw. The final cutting of the element is performed with a jigsaw. It must be pressed firmly against inside marked line.

Where to start

First is well organized workplace. Fulfilling this condition is especially important for high-quality cutting. If the space is arranged correctly, work will be convenient and comfortable. This condition is necessary to create a quality product.

The thrust structure is a special machine. People call it “swallowtail”. This table is made from rectangular boards. It has a wedge-shaped incision that goes into work area. Dovetail attached to the edge of the table.

An electric jigsaw can be used while standing or sitting. The workpiece should be located at a distance of 40 cm from the eyes. It is necessary that the lighting lamp be installed in front of the master. It is placed at an angle to the surface.

Tool preparation

The saw blade in a jigsaw must be fixed in a strictly vertical position. The teeth should point down. Before work, you need to stretch the fabric well. The degree of tension must be adjusted by compressing the frame. The device must be rested against the edge of the table. Then you should tighten the lambs with pliers. When straightening the frame, the canvas will stretch.

To cut out parts with a jigsaw small size, or shapes with sharp contours, you need to choose small files. This requires using fabrics with a large number of patterns per inch. When using them, the jigsaw does not jam when making turns. The cut is created neat and thin. If large-sized plywood products are made, it is necessary to use blades with large teeth.

How to cut with a jigsaw

To obtain an accurate cut, a number of conditions must be met:

The hand holding the jigsaw should only move vertically.
All movements must be made as smoothly as possible, without jerking. In addition, they must be performed with maximum amplitude. This is necessary to use the entire canvas.
With the second hand, the workpiece turns smoothly during operation.
Do not put too much pressure on the workpiece with the saw. No lateral pressure on the blade is allowed.
Artistic sawing is carried out only when the file moves from top to bottom. For this reason, the reverse movement must be performed without pressure.

When working with a hand jigsaw, it must not be guided along the marked line. The canvas should be drawn along the inside of the contour. This is due to the presence of a kerf after sawing. After completing the work, one of the clamps should be loosened. The frame of the device should not lose its elasticity.

Jewelry box

You can make a beautiful and spacious jewelry box for Valentine's Day or International Women's Day. To complete this craft, you will need to use exact drawing. The work is divided into several stages.

Preparing the work area

Before you start cutting out the parts of the box, you should prepare your working space. A special table is installed for this purpose. The craft will be created on it. In this case, the following rules are observed:

There should be no unnecessary items at the table while working.
The cutting device should always be at hand. A specific place is reserved for it.
Crafting table. It is placed in a ventilated area. The room should be light and spacious.

However, it is not always possible to install a table for cutting with a jigsaw in the right place. For an ordinary apartment, the workbench is usually placed on the balcony if it is insulated. At the same time, you can work on crafts in any weather.

Plywood selection

For the box you need to use a plywood sheet. When choosing a workpiece, you should pay attention to defects that often appear - cracks or knots. The workpiece is selected with a thickness indicated in the diagram. To transfer the drawing to the material, you should:

Sand the workpiece with sandpaper. You should start with coarse-grained material. This processing ends sandpaper with small grains.
The surface must be level. To do this, you need to fix the sandpaper in the sanding device. If you don't have one, you can take a small block and wrap it in sandpaper.
Grinding is carried out along the layers of wood.
The workpiece is ground until its surface becomes as smooth as possible.

After such preparation, you should transfer the craft template onto it.

Transferring the template to a plywood sheet

Before starting sawing, you should transfer the prepared drawing to a plywood blank. First you will have to print the drawing on paper. To transfer, you must have tracing paper and a pen. First, the template is attached to the workpiece with tape. Having a blank in front of you, you should think about how to cut out the different elements of the box, saving the available material as much as possible.

Sawing out the box

When cutting, you need to adhere to some rules:

The jigsaw should be positioned perpendicular to the product.
It is necessary to ensure that all movements are performed as smoothly as possible. You should not rush while cutting - this way you can make a mistake and ruin a piece of material.
It is necessary to use a sawing table.
First you need to cut out the internal elements. Only after this they begin cutting the contour.

When leaving the cutting line, it is necessary to correct the line with a needle file while assembling the product.

Advice! During work, your hands will get tired. In this case, productivity drops significantly. Fingers and eyes get seriously tired. All this can lead to hand injuries. This is why it is necessary to take breaks from work.

Assembling the box

Before assembly, you must familiarize yourself with the product drawing. Combining the parts of a jewelry box does not require fine workmanship. Before gluing different elements you need to make sure that they can be put together without problems. After several assemblies of the product without any difficulties, you should begin gluing the parts. Typically, a PVA composition is used for this purpose. During operation, it is necessary to eliminate any glue leaks.

Assembling a steam locomotive model

When the material is prepared and the drawing is printed, you should begin the process of transferring the diagram to the workpiece. In this case, it is necessary to take into account some operating rules. Many home craftsmen tend to transfer a drawing onto plywood using only a copy and a pencil. However, you can also use the “Black Ribbon”. When choosing this tool, the drawing is glued to the workpiece. Then the diagram is washed off the plywood with water, leaving only the marking lines.

Then you can make holes in the parts of the future locomotive. The parts of the locomotive contain parts of grooves cut out from the inside. To make such elements, holes should be made in them hand drill or an awl. The holes must be at least 1 mm in diameter. To avoid damaging the table surface when creating holes, you should place a board under the workpiece.

Now you can cut out the parts. You should not rush when cutting. The basic rule is to hold the jigsaw at right angles to the workpiece. All elements must be performed smoothly, avoiding unevenness.

When it is necessary to cut something out of plywood, many people are interested in the question of how to cut plywood? It is impossible to answer this question unambiguously, because there are different methods and tools for different purposes. In this article we will talk about the most popular methods of cutting plywood.

Cut the plywood

This procedure is performed using several methods. The easiest and most accessible is to use hand hacksaw. However, since the plywood sheet is quite dense, even when compared with a regular spruce board, cutting the plywood will require a lot of effort. For this reason, this method is only suitable for thin sheets plywood. A disk saw can serve as a substitute for a hand hacksaw. electric saw. In domestic conditions, this option is quite effective and makes it possible to cut both thin and thick sheets of plywood without much difficulty. The disadvantage of this method is that it cuts only in a straight line. At figure cutting This tool produces a lot of chips.

When it is necessary to carry out figured cutting from plywood in a large volume, then you should pay attention to specialized equipment. Lasers and milling machines make it possible to obtain a high-quality product.

Some tips:

Sawing should only be done on dry material. High level humidity causes an increase in the resistance of plywood. As a result, excessive force may cause the veneer to delaminate or the file to break.
It is necessary to replace the saw or cutting blade immediately after detecting signs of dull teeth
When cutting with a jigsaw to create clean and even ends, the main cutting lines should be placed along the line of the veneer grains
A rune jigsaw is more convenient when working across the grain. Although there are slightly more chips this way, the risk of the file being pinched and moving away from the drawn line is reduced.
When transferring a pattern for cutting onto a workpiece, you need to place the stencil in such a way that the parts to be removed are located in areas with imperfections, for example, knots, chips.

Shaped cutting methods

Procedure for using a jigsaw:

first of all, you need to print out drawings or stencils, which are transferred to the workpiece using carbon paper
to create through sections it is necessary to make starting holes with a thin drill
a file or jigsaw blade is inserted into the resulting holes, the free edge of which must be secured using a mounting screw or clamp
After this, the cut is made along the intended lines. At this time, you need to press the workpiece tightly against the workbench.
Upon completion of cutting, you need to remove excess parts and process the finished object with a file or sandpaper.

Creation round hole on a milling machine:

standard line, which is included in the milling installation need to be secured in the center of the circle using a self-tapping screw
if the ruler is not long enough, then you should create a simple bracket from metal profile or wooden planks
by rotating the cutter along a fixed radius, a groove is selected along the circumference, resulting in an almost perfectly smooth hole
When calculating the diameter of the circle, it is necessary to take into account the dimensions of the working cutter. More precise numbers are contained in the instructions for the device.

This device is great for cutting circles, as well as individual arcs - for example, for creating grooves for furniture brackets. The milling machine is perfect for working with thick sheets of plywood. A complex pattern cannot be cut out with such a device, but a circle or arc can be cut with ease.

Decorative wooden panels They are a true classic, confer nobility and are considered a sign of excellent taste. Wall carved plywood panels are an affordable and durable material for creating unique interior. The plywood sheet is the basis for applying veneer from natural wood valuable types of wood, for example, oak, ash and others. Such products are attractive appearance, low cost, strength, flexibility and ease of processing. In addition, this material is resistant to chipping and damage during cutting out designs.

People who prefer to create decorative items with their own hands can master the skill artistic cutting. Wood is a material that allows you to create genre paintings and decorative compositions. Such products can decorate your own home, or you can give them to friends. Today wooden crafts at the peak of popularity. Wood carving lessons in large quantities are present on the Internet.

May 29

Sawing out plywood with a jigsaw according to drawings is exciting activity for handmade lovers. Openwork products can be used to decorate pieces of furniture, interior design, wall panels, caskets, etc.

The work is done with both a manual and electric jigsaw. You need to prepare free space at a table or workbench, purchase necessary materials and, most importantly, prepare a template, draw a picture or make a drawing.

In this article, let's look in more detail at how to cut out plywood using a jigsaw according to drawings, how to correctly transfer a template onto plywood, and how to select a high-quality workpiece.

Materials for work

Plywood without knots good quality thickness from 3 to 5 mm.
There are two types of sandpaper - fine and coarse. In order for the layers to be cleaned evenly, you need to place a rectangular board during sanding.
Jigsaw manual or electric. If, when cutting from plywood with a jigsaw according to the drawings, the pattern turns out thin, with turns, and a radius of less than 2.5 cm, then it is better to use a hand tool so as not to spoil the template.
Stain (optional).
Varnish. It is best to use acrylic, it is odorless and dries quickly.
Drill. You will need it to make a hole for the jigsaw file.

How to make a template?

If you don’t know how to draw, but want to start cutting out plywood with a jigsaw, you can get drawings from numerous Internet sites. You need to find the required ornament or design and print it in full size.

The template is transferred to the plywood only after it has been thoroughly processed and used for application. ballpoint pen or a simple pencil of medium hardness. Some people use carbon paper.

Then the drawing is carefully drawn on the plywood, and all irregularities are corrected.

Preparation of plywood

Before starting work on cutting out plywood with a hand jigsaw according to the drawings, you must first prepare the base. First, for convenience, cut out the required size by attaching the template to a sheet of plywood.

After it is prepared right size, sand the surfaces. First, the sheet of plywood needs to be sanded with coarse sandpaper, #120 is suitable. Then wipe the surface with a dry cloth. Then the material is sanded with fine sandpaper, for example, No. 80. Wood dust can only be shaken off with a dry cloth.

Beginning of work

After the surface of the plywood acquires an even structure, transfer the pattern according to the template. To start cutting with a jigsaw, you need to make a hole for the saw with a drill. After inserting the file, secure it well on both sides of the hand jigsaw. If an electric tool is used, then the jigsaw must be secured to a special stand so that it does not vibrate and spoil straight lines.

The work is carried out slowly, carefully, observing safety precautions.

Once the entire design is cut out, sand the inside side cuts.

Final stage

In order for a picture or piece of furniture to acquire a finished look and last longer, it needs to be treated with varnish. If you want to give some other shade to the product, then first apply stain, and after drying, apply varnish. After applying the first layer of varnish, you need to let it dry thoroughly, then use fine sandpaper to treat the surface again, as the varnish can raise the pile on the plywood. The final final coat of varnish is applied after wiping the product with a dry cloth.

All photos from the article

Plywood is not only unique construction material, but also an excellent basis for making various crafts. Moreover, for this you will need a minimum of tools - a manual or electric jigsaw, the plywood sheet itself, and the result largely depends on human imagination.

Scope and advantages of plywood sheets

There are many options for using this material, including general case There are such ways of using plywood as:

floor covering, and plywood can be used both for leveling and for insulating the floor;
wall cladding - unlike drywall, plywood sheets are much stronger, although they weigh more, and are susceptible to moisture;
arrangement of formwork when concreting foundations or making concrete blocks;
arrangement of a solid base for soft roofing material, for example, under bitumen shingles;

manufacturing various crafts, ranging from simple figures to complex mechanisms, in which even moving parts are made of plywood. In general, in the question of what can be made from plywood with a hand jigsaw, the only limit is a person’s imagination and perseverance, so the scope for creativity is simply limitless;
Full-fledged furniture can also be made from plywood, and its strength is in no way inferior to ordinary wood.

This material also has a number of advantages:

even thin material has outstanding strength, due to the layered structure of the material. consists of several layers of veneer, and when gluing, the fibers of each layer are located at an angle to the previous one, so that such a sheet works just fine when bending;

due to the use of adhesive mixtures when gluing veneer layers, plywood is not afraid of moisture;

Note! For use inside the house, you should choose sheets marked FC, this means that urea glue was used when gluing, which does not contain phenolic compounds that are dangerous to human health.

You can buy a large sheet of plywood for about 500-700 rubles; it will be enough for several dozen complex crafts. So the price can also be considered an advantage of this material.

Rules for working with a jigsaw

When making any craft, you can’t do without cutting plywood with a jigsaw (manual or electric).

There are several rules in this matter that should be followed in any case:

The plywood sheet itself is quite flexible, so if you try to saw it without a rigid backing, it will bend and it will be difficult to adhere to the drawing line. The stand can be made from an ordinary thick board with a hole in the center for a jigsaw file; it is attached to the work table with an ordinary clamp;

Note! It is important to correctly install the file into the jigsaw before starting work. The direction of the teeth should be as shown in the figure.

when cutting plywood with a jigsaw, the tool itself is held perpendicular to the sheet, there is no need to press hard on it;
when working, you should turn not the jigsaw, but the plywood sheet itself;
It is unlikely that when figure cutting it will be possible to do without sharp turns and sharp corners. To get a sharp turn or sharp corner the instructions require moving the jigsaw up and down in one place, gradually turning the plywood sheet so that a small hole is formed in it, in which the file will turn freely. After this, you can cut out the desired angle;
You may also need to cut out blind holes that cannot be approached from the edge. In this case, you can simply drill a hole in it, insert a file into it, and only then secure it to the jigsaw frame. After this, you can cut a hole of any shape.

It is not necessary to make plywood products with a jigsaw using hand tools, the same quality can be achieved using power tools.

Examples of DIY plywood products

It is physically impossible to consider all options within the framework of one article plywood crafts. But it’s still worth stopping at a few interesting options.

The simplest plywood crafts

As a test, you can try to make a couple of simple crafts consisting of only one element. There are many options, for example, you can try to cut out the outline of an animal from plywood and then paint it in the desired colors.

This level of complexity is suitable even for children; the work will be performed in the following sequence:

first, the desired picture is simply printed on plain paper (or drawn by hand);
then you need to transfer the outline of the image onto the plywood. You can do this using carbon paper or simply cut out the image and paste it onto a wooden base;

then we simply carefully cut out along the contour; even a preschool child can make such plywood products with his own hands using a jigsaw;
After cutting, all that remains is to sand the figure and paint it. In order for the figurine to look bright, it is advisable to use a wood primer and only then paint it.

You can complicate the task a little and try to make a figurine consisting of several elements, for example, a Christmas tree or a snowman. A plywood Christmas tree with a jigsaw will consist of 2 parts connected like a tongue and groove.

To make it, you just need to trace 2 contours of the future Christmas tree on plywood and provide grooves in both elements. In one part, the cutout is made from the top, and in the second - from the bottom, the size of the cutout is up to the middle of the height of the future Christmas tree.

After cutting, you will need to sand the surface of the plywood and walk along the edge to remove burrs and smooth out any sharp edges. The dimensions of the grooves in the lower and upper parts must correspond exactly to each other.

Note! Many do-it-yourself drawings of plywood products using a jigsaw can be found on the Internet, for example, on our portal. This is much more convenient than drawing yourself.

After mastering figure sawing, you can move on to crafts consisting of several parts. As an example, we can give a figurine of a snowman, consisting of a torso, a head, two legs and arms; all these elements will be connected to each other with an ordinary thick thread.

The basic principle remains the same - we draw up a drawing, cut out individual parts from a plywood sheet, and then move on to combining them. In addition to working with a jigsaw, you will have to drill in the plywood thin holes in order to thread a thread through them.

A plywood snowman is assembled into one piece using a jigsaw; you can put a small bright scarf around your neck. As with other crafts, the color of the figurine is of great importance; the coloring should leave the impression that the snowman has just been brought into the room from the cold.

There are many options for relatively small and uncomplicated crafts, and drawings of plywood work using a hand jigsaw can always be made independently or simply found on the Internet.

Making the task more difficult

If you have a jigsaw, you can try to take on a larger task. It is relatively easy to make an elegant frame for a picture from plywood, and the picture itself can be made entirely of plywood.

A picture made of plywood can be easily obtained by combining light plywood and a dark background. You just need to cut it out on a sheet light color the desired outline and then fix it in a frame on top of a dark background. Due to this, it is achieved desired effect, externally, such paintings look no worse than ordinary ones, even more unusual, because traditional painting is more widespread.

As for the technology, to make a picture you only need a template with the location of the cutouts. You can make it yourself; to do this, just make the image you like black and white, add contrast and manually mark the position of the cutouts. Number of plywood layers different shades limited solely by the skill of the author.

Thin plywood is also suitable for making a frame for a picture or photograph, and frames made from plywood with a jigsaw can also be solid, that is, cut from one piece of plywood. The simplest plywood frame is a closed plywood contour (rectangular, square or oval) with figured sawing along the outer perimeter.

On such a frame you can attach various plywood figures, thereby creating the feeling for the viewer that they are just sitting down to rest. You can limit yourself to a simple neutral pattern.

Note! If you plan to make a photo frame, then it makes sense to place a stop on the back side so that the frame stands stably on the table.

Mechanical plywood crafts

Making such a craft from scratch is a rather complicated undertaking, and the main difficulty will lie in the design. For example, a machine made from plywood with a jigsaw has more than a dozen parts of complex shape; a deviation of even 1.0-1.5 mm will make it impossible to assemble the model, so drawing up a drawing is the main difficulty.

You can simply purchase a ready-made set of factory-made parts, but it is much more interesting to cut out all the parts yourself using the drawings and assemble the car model with your own hands. All you need is patience and perseverance; after all, there are a lot of parts, and their shape is not the simplest. The remaining steps are the same - sanding, applying acrylic primer and painting.

Another option is to simply create an original case from plywood, for example, for wall clock, leaving only the dial visible. It will look original, connect individual elements can be made into one whole using glue.

More complex products with moving elements also made of plywood can be made from plywood. In this case, it is better to purchase or download drawings of plywood products using a jigsaw; it will be difficult to make them yourself, since you will also need to calculate the number of teeth and the size of gears, shafts and other moving elements; this is difficult to do without the appropriate skills.

Plywood furniture

Such furniture weighs little, but in terms of strength it is not inferior to analogues made from solid wood and even surpasses them (due to the layered structure of the material). To make an original table, bench or chair, you only need a jigsaw and a thick sheet of plywood of the appropriate size.

You can prepare your own drawings of plywood furniture with a jigsaw yourself; the difficulty arises at another stage - it often becomes necessary to bend a plywood sheet.

There are 2 ways to solve this problem:

Having steamed the bend, you can soak the plywood for 20-30 minutes hot water, and then try to give it the desired shape;

in the place of the bend, cuts can be made at equal intervals, not reaching the edge of the sheet by 2-3 layers of veneer, then the plywood is bent, and the place of the bend is coated with glue.

It is not necessary to make furniture entirely from plywood. For example, the tabletop can be made of plywood, and the legs can be made of ordinary wood, the sides of the bench can also be cut from a sheet more than 10 mm thick, and the seat and back can be laid from boards.

In conclusion

Ordinary plywood sheet in capable hands could turn into a real masterpiece. The only limit when working with this material is the author’s imagination, so you can make anything, from simple animal figurines to copies of world-famous architectural structures.

It is also important that the only tools you will need are a jigsaw and emery, so no special expenses are expected. The video in this article shows the process of making an original painting from plywood.

In the comments to the article, you can always clarify any questions you have about working with plywood.