From tires with your own. Flower beds made of tires: manufacturing ideas. Functional crafts made from tires

It's always nice to make something beautiful and useful out of a junk item. A good example such creativity - beautiful flower beds made of tires. They are not difficult to build, but their benefits are enormous. But the imagination of dacha masters is not limited to this. From old wheels, which often just lie on the road and pollute environment, they make street furniture, sculptures for the garden, and even build small children's towns.

Such simple and unsightly material at first glance, like old car tires, in fact, as if it was specially created so that every summer resident could feel like a real artist and decorate his plot with real designer flower beds and original author’s sculptures. Without exaggeration, you can cut anything out of tires. Such crafts are on par with those made from plastic bottles all year round will delight the eyes of the owners and guests of the dacha, and most importantly, will not require special financial investments.

It’s also nice that the benefit of the idea of making crafts with your own hands from tires is double: on the one hand, we recycle a wheel that polluted the environment, and on the other, we get an original one. garden decoration or a flower bed.

Crafts made from used rubber tires amaze with their variety and the richness of the imagination of their authors. Here are the most common ones:

In the photo - flower beds made from tires

A small flower bed. The easiest way to make flower beds from tires is to leave the tire as is, just decorate it brightly and fill it with soil. Nothing complicated. Even a weak woman or child can cope with this, and such a flower garden will look wonderful.

This photo shows cups made from old wheels.

Flower beds from old tires in the form of various objects. Make them more difficult. The tire is cut into two unequal parts and the larger one is turned inside out. It is worth noting that the edges of tires can be made various shapes, it's all just a matter of imagination and sleight of hand. Using this technique, flower beds are made in the form of a mug, flower, or vase. A huge rubber cup made from tires looks very funny. And some craftsmen thus build an entire tea set on their site.

Turtle made from old wheels

Flower beds and sculptures in the form of animals and fairy-tale characters. A funny frog made of tires, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it’s easier to list what they don’t do from this available material. The only condition is to think through the composition from the very beginning, so that there are no unpleasant surprises later.

In the photo - multi-tiered flower beds for flowers or berries

Multi-tiered flower beds made from several tires. The simplest one to make is a three-tier one, but the number of parts can be greater. Several tires of the same or different sizes are placed on top of each other or in a checkerboard pattern. A tire well looks impressive, stylized to look like a real one and equipped with all its inherent attributes: a chain, a shaft with a visor, a bucket. This flower bed can also be used as a vertical bed for growing berries and vegetables.

Tire beds for strawberries

A strawberry bed made from tires will take up minimal space and give a rich harvest. It is also perfect for growing seedlings, herbs, and peppers. From such a flower bed you can make a fence for a raspberry or currant bush, or make several of them and use them to delimit the garden into cultural zones. It is also worth mentioning that a well made from tires is often made not only decorative, but also used to disguise it drainage hole or septic tank.

Experienced craftsmen and craftswomen know many secrets that help them create garden sculptures and flower beds made from tires with your own hands. They understand better than anyone how to make unique and inimitable handicrafts from old, useless trash. Here are just a few of these secrets:

Imported tires are best suited for the job, as the rubber on them is softer and easy to cut. But in their absence, domestic products will do. In principle, they are quite easy to process and allow you to give crafts from them different shapes.
Tires intended for use on winter roads are more pliable, easier to cut and easier to process than those used in summer.
The longer the tire has been used and the more it is worn, the thinner, softer it is and the easier it will be to work with: cutting and turning.
Before you start creating a craft, the material needs to be prepared: thoroughly cleaned of dirt, and degreased before painting.
To cut car tires, use a sharp knife with a thin spine. You can check how well it is sharpened by running the blade along a notebook sheet, holding it suspended. If the knife does not cut or tears the paper, it is not sharp enough.
Cutting a car tire for garden crafts It’s more convenient if you periodically lubricate the knife with machine oil. This will make it easier to fit into the rubber. Used oil will also work.
When you need to cut out some shaped elements, markings are applied to the tire. It will help you achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, in as a last resort, marker.
The durability of the craft depends on what paint you use to paint the rubber. Suitable for old wheel tires: car paints, as well as any paints for street work.
Before painting the tire, it is recommended to prime its surface. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
Paints in aerosol cans speed up the painting process to 20-30 minutes, and make the painted layer more uniform.
Decorative finishing can be made from scrap materials. For example, cover the surface with pebbles, bottle shards, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed from a tire not only from the outside, but also from inside. This way they will look more aesthetically pleasing, and the black rubber will not be visible from the inside.

Of course, every master has his own secrets, and it is impossible to list them all. And when you take up this fascinating business - tire sculpture, you will certainly have them too.

Several master classes on making crafts from old tires

As mentioned above, crafts made from tires are varied. Their appearance and purpose are limited only by the imagination of the master. We invite you to familiarize yourself with the basic models. After reading them, you will learn how to make a flower bed from tires with your own hands and you will be able to create original, unique and useful garden accessories yourself.

A simple flower bed in the shape of a flower

A small flower bed made like a daisy from one tire is the simplest basic model. You can make several such flower beds, arrange them sparingly and decorate the approach to the house. Sometimes they are placed on asphalt or tiled areas.

We will need:

One old tire.
Sharp knife.
Marker or chalk.

Mark the cut location with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that could damage the knife. They are usually inserted into truck tires.

We cut the tire along the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Moving the knife along the thickening, we cut out reverse side tire circumference.

Then, along the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (end of the tread).

After this, the tire needs to be turned out. The flowerbed is ready. All that remains is to paint it, giving it a more attractive look, fill it with soil and plant plants.

For greater clarity, watch the following video:

Garden flowerpot from an old wheel

You can make a beautiful garden vase from an old wheel in a short time.
Such flowerpots look better in pairs in front of the house, on opposite sides of the door or porch. Let's look at a step-by-step master class on how to make them.

We will need:

Tire with disk.
Sharp knife.
Chalk or marker.

Using chalk or a marker, mark a zigzag line along the entire frontal circumference of the tire, along which we will begin cutting. Thanks to her, the flowerpot will look like large flower with many petals.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in machine oil (used oil will also work).

After the wheel is cut, we check whether there are any uncut sections left and proceed to turning it out. It is better to do this together with an assistant, slowly, in parts.

After we managed to turn out the tire for the future flower bed, it turned out that there was a tube in the wheel. It needs to be cut out and thrown away.

The flowerpot is ready. Its bowl was made from the main part of the wheel. There is no need to remove the disk from the tire. It serves as a raised platform and stand for the vase, and the remains of the tire at its base provide additional support.

All we have to do is clean, degrease and decide how to beautifully paint our new garden vase. When you pour the earth into the bowl, do not forget to put a gasket on its bottom so that the earth does not spill out and make several holes in it to drain the water.

Video instructions for making a flowerpot:

Swan from an old tire

The most popular garden sculptures made from tires are swans. They are usually placed near an artificial pond, which gives the area a stunning look. You can plant grass in the bird itself, then it will seem that it is peeking out from behind the vegetation. Detailed step-by-step instructions with photos will help you make it.

We will need:

Sharp knife.
An electric drill for making holes for a knife to fit into the rubber.
Sander or file.
Jigsaw.
Chalk or marker (preferably a marker).
Wire 5-6 mm in diameter (rigid, to give the shape of a “swan” neck).
Plastic clamps (to shape the head).
Roulette.
Gloves.

According to the diagram, we mark the contours of the future swan on the surface of the tire using the following video, in which the author uses dimensions in inches, calling them inch in the international measurement system. Inch (1 inch) = 2.54 cm.

How beautiful and neat our sculpture will turn out depends on the accuracy of the markings.

Let's start cutting. At the initial section, we drill 3-4 holes at a distance of 3-5 cm with a drill and cut the tire between them with a knife. We insert a jigsaw into the resulting cut and begin to cut out the swan.

After all the contours are cut out, turn the tire inside out. We try to do this carefully, since careless movements in the thinnest places can tear it.

To make the bird’s figure look more neat, we smooth all the cuts along the contour with a sander.

To shape the swan's neck, we insert a wire into it. To do this, drill holes in the center of the neck and to the end of the body every 20 cm. We apply the wire and secure it in the holes with soft staples.

Forming the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps we give the swan’s head the shape.

Our tire swan is ready. All that remains is to paint it and make a stand.

The swan can be painted in White color or not paint at all, leaving it black. We make the beak red. Swans look very beautiful in a pair: black and white.

Without a stand, soft rubber swans will not stand. You can simply take any tire and paint it, for example, blue. Thus, it will symbolize the pond. Or you can take the time to make it curly.

We make the figured stand in the same way. We mark the outline on the tire along which we will cut, cut the tire along it, turn it inside out and paint it.

Using a similar technique, you can make any shapes from tires: animals, birds, fairy-tale creatures.

But, if you don’t want to bother with complex markings and cutting, you can do it simpler. For example, assemble a cute frog from whole tires.

In the photo - a flowerbed in the shape of a frog

Making a frog from tires is very simple. The body and head are assembled from one or several larger tires, eyes are assembled from small wheels, for example from a baby stroller, and paws are assembled from rubber scraps.

Flowerbed chamomile

It’s hard to come up with a decoration that’s easier to make than this flowerbed. Despite the fact that it requires several car tires, it can be assembled in literally 15-20 minutes, it looks nice, neat and will never be out of place.

We will need:

Three old tires of the same size.
A sharp knife or grinder.

We cut all the tires in half, having previously marked the cut locations. Before cutting, find out if there are metal cords in the rubber. A knife won’t take them, so use a grinder.

To give the future flower bed an aesthetic appearance, you can paint the tires. It is better to do this in advance, immediately after cutting.

It’s always nice to make something useful out of a junk item, and if the craft turns out to be beautiful, it’s double the pleasure. One example is crafts made from tires. They are used to make decorations for country houses or garden plot, various flowerpots and flower beds, build children's attractions and even make country furniture- tables and chairs.

Flower beds and flower beds made from tires

Let's start with, perhaps, the simplest flower beds and flower beds. Do you think it’s difficult to make a multi-tiered one? Maybe, but not from tires. Take a few pieces different sizes, paint them in bright colors and stack them in a pile - one on top of the other. To prevent your slide from falling apart, fasten the tires from the inside using a screwdriver and self-tapping screws. Two per connection will be enough. You fill the soil inside and plant the plants. To prevent the soil from spilling out, you can cover the inside of the tire with a piece of . It will remove excess water, but will not allow the soil to spill out. A beautiful tiered flower garden is ready.

If you like flower beds correct form, you can do something like this. For example, making a flower bed in the shape of a chamomile out of tires. First, the tires in the lower tier are laid out and fastened together. Fill the middle of the tires with earth, as well as the free space inside the circle. You can put it there for better drainage. broken brick or other construction waste, sprinkle a little earth on top and compact it. On the prepared surface, stepping back from the edge by more than half the diameter of the tire, lay out the second tier. They are also fastened together, the middle is covered with soil, and the core is placed on top. You can plant tall flowers at the very top, and border or low-growing flowers on the lower tiers.

Another option for a flowerbed made of tires in the shape of a chamomile - in one tier. To do this you will have to cut the tires.

How to cut tires

In general, when making crafts from tires, they often need to be cut. This is far from easy. Can be cut off more or less easily lateral surface from the tread. People with strong arms and good knives do this manually. By the way, a good workout for the hands and the entire shoulder girdle. If you are going to cut with a knife, lubricate the blade with grease: the rubber constantly “jams” the metal, and the blade covered with grease slides out well.

You can also cut off the sidewall with a jigsaw or grinder. Cutting with a grinder is relatively quick, but the stench is wild. Therefore, with a grinder, even if there is one, only the first cut is made so that the jigsaw file can be inserted. Then they work with this tool. To cut rubber, take a blade with a reverse tooth made of good steel.

If you have to cut the tread, doing it with a jigsaw or, especially, with a knife is useless. Anyway with a regular knife. Blades made of special steel can even cut iron cord, but it is unlikely that anyone would want to disfigure such a tool about old tire. That’s why they most often work with an angle grinder. To avoid any troubles, the protector is secured: always think about safety. If the sidewalls have already been cut off, the tread tape is quite elastic and can be compressed with a clamp. Once cut, it will not spring back.

Flowerpot from a wheel: turning the tires out

If you have a tire with an old rim, you can use it to make a flowerpot with a leg.

To do this, cut one sidewall along the tread. And they turn it inside out. This is not an easy matter: considerable physical strength and perseverance. The rubber is elastic and it is impossible to turn it out the first time. If absolutely not possible, notches are made on the outside side across the tread. They should be quite deep, but not through. It will also help if you make cuts along the edge with a depth of at least 5-7 centimeters. They will look like fringe on an inverted tire.

Why do they turn it inside out? Inner surface smoother, and the shape may turn out to be more interesting, especially if the edge is made not linear, but jagged. The result will be a gracefully bent decoration.

For details on how to turn out a tire, watch the video.

In a similar way, you can turn out a tire without rim. The sequence of actions is the same. First, cut off one of the sidewalls - straight or zigzag. To ensure that the “petals” are even, it is advisable to mark them. It is convenient to do this with chalk. The mark is then cut with a jigsaw or knife (if the cord is synthetic).

They turn it like this: they step on inner part tires, grab the edge with your hands and pull up and towards you. It is important to achieve the first result: when at least some part is bent. If the tire looks like the photo below, it's already a success. It is developed by successively turning the edge inside out and standing on the already turned part so that it does not turn back.

Watch the process again in the video. This time they turn out the tire without the wheel (they cut it, by the way, with a knife).

Even by itself, such a tire turned inside out looks good. If you paint it, it becomes even better. If desired, they can be combined - different colors, sizes, installed differently: on a tire or on legs.

A tall flower bed always looks beautiful. Especially with hanging plants. It can also be made from tires, and there are several possibilities. The photo below shows two ways to secure cut tires at different levels. The first is to use stumps for this, to which flowerpots are attached with nails or screws. The second is to use reinforcement - three or four rods on which to put rubber. By putting on the right level tier, it needs to be secured; on metal this can only be done with the help of clamps.

It is not always possible to place a flowerpot on the ground: some areas are so developed that even one square meter it is problematic to single out. For this occasion, people came up with various hanging flowerpots, also made from old tires. Only a small part of the whole tire remains, so you have to cut a lot... be patient. For example, you can do hanging planters in the form of a dolphin, parrot, rooster and other strange birds. For some ideas, see the photos.

Tire planter - parrot, rooster and dolphin

All these crafts made from tires. Only a small part of them - the heads - are often made of dense foam. Cutting and sanding the part the desired shape, it is attached using self-tapping screws coated with glue (this is a secret, remember), and then painted. Watch the video to see how to make a parrot from a tire.

Below are posted step by step photos, which depict the main stages of creating a table or ottoman from a tire. You will need two more circles of plywood or fiberboard of a suitable diameter; hemp rope is used for finishing. From available materials you will need glue and a glue gun, as well as varnish and a brush for applying it. To connect the circles to the tire you will also need self-tapping screws - 8-10 pieces on each side.

Next we take glue gun and after heating the glue, apply it to the sidewall. If you don’t have such a luxury on your household, take the glue that’s in the tube bigger size, like " liquid nails" It's easier for them to work with mounting gun. Apply a stripe to the side and glue the hemp rope. So - all the way to the top.

Using the same technology, we decorate the lid of the table (ottoman). You need to start laying from the middle: apply glue, lay the rope.

Finishing the work - applying varnish. We do it slowly, soaking it well. This is what should happen as a result. If you made a table, you can put glass on top - a rope, even coated with varnish, is not the best best coverage for the table, although beautiful...

Variety can be achieved through the cover. It can be sewn from the dense material you like.

Cute ottoman...

You can knit it - large knitting looks interesting.

Large knitted cover - looks interesting

If you don’t want to sew or knit, you can use old knitted items cut into strips. They are cut into long strips 3-5 cm thick, rolled into balls and then wrapped around the ottoman. It turns out interesting, especially if several colors are combined.

If you need a taller ottoman, screw the two tires together with self-tapping screws and continue working with them in this form.

Another option, see the video

Decorating a summer cottage is a creative and exciting task. At the same time, it is not at all necessary to buy expensive sculptures or other ready-made works of art. It is enough to show ingenuity, imagination and perseverance to get beautiful figures from scrap materials. In this article we will look at how to make garden crafts from tires.

Ideas for decorating your garden

Using old tires allows you to decorate the interior of your garden with virtually no investment. The price of the finished product will be negligible, and the family budget can be spent, for example, on improving living conditions. So, what can be created from the mentioned material?

Example #1: swan

For all crafts you will need approximately the same list of materials:

And tools:

Instructions for creating a swan:

Draw chalk lines along which the tire should be cut. Do it as shown in the photo or find suitable patterns on the Internet.

Carefully cut the rubber.

Using a grinder, we cut the part that does not yield to the knife.
We turn the product inside out, bending the cut edges.

Advice: if the craft is made for the children's part of the garden, then it is necessary to carefully handle the sharp edges of the cut elements, otherwise the child may be injured by them.

We paint the swan in the desired colors.

Using various patterns, you can get not only swans, but also a wide variety of other garden crafts from car tires.

Example #2: caterpillar

In this option, you don’t even have to cut anything, but you will need a little more materials:

We proceed as follows:

We partially bury the tires in the ground, connecting them with self-tapping screws.
We attach a bar bent in the shape of a mustache on top.
We screw empty cans to the front.
We paint the figure and get a slightly surprised, but quite attractive insect.

Example No. 3: teddy bear

To get a clubfooted beast you will need:

Work progress:

We make holes in the large and small tires using a grinder so that they can be connected with a pipe.
We close the tire holes with pieces of plywood, which we fix with self-tapping screws.
We glue linoleum onto the plywood.
We cut out ears and paws from thick rubber, and then fasten them in the right places.
We place the resulting figure on two small wheels, which will play the role of original legs.
We paint the craft in two layers.

Example #4: giraffe

Not enough exoticism at your dacha? Build a giraffe! For this you will need:

You won't have to work too hard:

Bury the tire halfway into the ground.
We knock down a log and a block of wood with nails into a semblance of a neck and head.
We bury the resulting structure next to the tire.
We cut out the ears from plastic and attach them to the head using nails or glue.
Glue the eyes from the toy onto the face of the resulting animal.
At the back we fix a piece of watering can as a tail.
We use paint to give the craft the appearance of a giraffe.

Example #5: crocodile

A toothy predator will also be able to perfectly decorate your area. For this we use:

Some carpentry skills will be required here:

We cut out the tire, cutting out the body of the crocodile.
We cut out the shapes of the back and abdomen from the boards, fix the slats as spacers as shown in the following photo:

We insert the resulting frame inside the back and secure it with screws.
From below, we fix the belly of the future crocodile in the same way.

We screw plastic teeth into the “mouth”.
Glue the scales.
We insert table tennis balls into the eye sockets.
We paint the craft in a green color.

Practical use of tires

Products made from tires for the garden can, in addition to having a decorative value, also have a practical value.

Here are some options for using them:

Vases for flowers. The tire is cut and turned inside out, after which it is filled with soil and plants.

Swing . Here you can experiment from the banal hanging of an entire product to cutting out fancy shapes. (See also article.)

Arrangement sewer wells . Tightness and moisture resistance make tires an excellent cheap material for creating the walls of septic tanks or other similar structures.

Children's sandboxes. To do this, just dig the tire and fill it with sand. The costs are minimal, and the child will already have a place to play.

Steps. If the terrain on your site has a slope, then it can be equipped with tires, which will greatly simplify overcoming it.

Bicycle racks. Bury the tires halfway into the ground next to each other, and you can easily stack your bikes between them.

Fencing. With tires you can easily fence off the desired area and divide its zones.

Sports and game equipment. This could be an obstacle course or just a product dug into the playground that children will happily climb on.

Conclusion

As you can see, you shouldn’t rush to throw away old car tires. With their help, a summer cottage can be turned into a real amusement park. It could be like decorative crafts in the form of various animals, and completely functional objects.

The main thing is to use your imagination correctly and put some effort into arranging your garden. Below are some solutions to this problem.

The video in this article will provide you with additional information that is directly related to the materials presented. Creative thinking and old wheels will allow you to improve your own dacha almost free of charge.

Almost any summer cottage allows you to bring a wide variety of ideas to life. So, you can use convenient paths made from old tires as decorative elements. There is no need to rush to throw away things that have become unnecessary; you can restore these items and bring something new and original.

Device example garden path from tires

Paths from old car tires, made with your own hands, will become a unique addition to anyone. Moreover, their use can be completely diverse. From car tires you can make an original frame for the following various garden elements:

or flower beds;

It should be noted that most owners country houses people will be very willing to build garden paths from car tires, due to the fact that this method is not overly labor-intensive and costs virtually no large financial investments. By the way, to independently improve garden paths you will need to use not the entire surface of old tires, but only a certain part of it - treadmill, the so-called protector.

Garden paths made from cut tires

To make your own such high-quality decorative element Absolutely any old tires will do in your garden, but it is best to use those left over from trucks. Their use will significantly increase the width of the future convenient garden path, but at the same time you will need much less tires than if you used car tires from passenger vehicles.

Moreover, this will in no way affect the quality of the future path, but it will allow you to reduce the time spent on the external improvement of your site. There are several reasons why it is recommended to use rubber from old car tires:

Manufacturing process

It should be clarified that all required material for such a track it will be absolutely easy to obtain.
The easiest way to do this is step by step:

After you have built such a garden path with your own hands, it will be advisable to walk along it several times, which will allow you to better press the boards with ribbons into upper layer soil. In order for the coating to lie well, the ground underneath must first be leveled.

For this purpose, you will need to carefully remove a small top layer of earth, and fill the resulting area with fine gravel or pour regular concrete. When the blank for such a path is completely ready, you can spread the rubber coating you made for the garden on it. When laying rubber bands from car tires, it is not at all necessary to lay them directly on the ground layer.

We nail the rubber onto a special board

Using ordinary nails, they can be carefully nailed to wooden beam or boards, and only then carefully lay them out on the garden path.

Moreover, if you do not place the car tires close to each other, but leave a small gap of 1-2 cm wide between them, then new grass will soon grow through such cracks.

This will look very nice and will also prevent the rubber bands from car tires from moving to any side in the future. If you do not have your own truck, then the tires necessary for the garden path can be purchased absolutely free. For example, qualified technicians from all kinds of tire shops will most likely be only happy if you help them get rid of unnecessary material.

The use of decorative paths from tires

In addition to the above-mentioned areas for using such tapes from car tires, it would also be advisable to use them in the following places in a suburban area:

Personal parking road transport on the territory of a personal plot;
Path at the entrance or entrance to your yard;
A place used for washing cars, bicycles or scooters;
A utility yard with various buildings, the passages between which can be lined with similar high-quality decorative paths made from car tires.

Similar coverage on site country house, built with your own hands, will not only look very harmonious in natural design, but also distinguished by its special practicality during operation.

Option for constructing a garden path from tires

In addition, this coating itself is absolutely non-slippery, which makes the chosen solution more than rational, especially if your family has small children or elderly people. In the spring, when the snow melts or at any other stormy time of the year with heavy precipitation, certain problems often arise with access to the summer cottage. This problem can also be solved by using rubber bands.

It is necessary to spread them on the most problematic places and any car will pass over them completely unhindered.

It is also worth noting that it would not be superfluous to carry with you not a large number of similar tapes in the trunk of your car. They can always be useful to you in case of the most unforeseen circumstances, allowing you to get rid of unnecessary manipulations with a shovel and the need to place boards under the wheels if your car cannot drive off-road.

Such interaction of rubber with rubber will ensure almost caterpillar cross-country ability of vehicles. Another, less known, but rather eccentric use for old car tires is to use them as country buildings. Since this material can be given a semi-cylindrical shape, just like tiles, it can be laid in a completely similar way.

Naturally, this option is not suitable for a basic country cottage, but, say, it is a more than profitable solution, since with the help of old car tires you can build with your own hands an almost eternal water-repellent roof that can withstand any bad weather.

This is what a cottage roof made from car tires looks like

If the decision to create such a decorative element from car tires is on your summer cottage already accepted, you can choose from two possible options:

Use rubber bands from tires (the method for obtaining them is described above);
Use rubber tiles, which are essentially recycled tires.

Both of these options are equivalent in their execution. Rubber belts from car tires and rubber tiles have exactly the same characteristics and similar durability.

A summer cottage is a great place to bring extraordinary ideas to life.

The owners of country houses try to improve their territory and use unnecessary things to create compositions, which, after restoration, become a decoration of the site.

This and kitchenware, and antique furniture, colorful caps. Add some flair to landscape design car tires will help.

Craftsmen are very creative, so they make flower baskets, swings, swimming pools and sandboxes for children from tires.

An example of using tires - a homemade pond

If you get a little creative, you can easily create a garden path with your own hands on a plot of old tires.

Pros and cons of using tires in path construction

The advantages include:

The main advantage of rubber is high quality. Despite its service life, the tire remains resistant to temperature changes and can withstand any precipitation well. Its appearance does not deteriorate from an increase or decrease in temperature. Therefore, tires occupy the main place in the arrangement of a garden path. The equipped path will not crack under the influence of frost, will not get wet under heavy rains and will retain its shape in the hot summer.
Behind the tracks easy to care for. You just need to sweep away the debris and water it with a hose from time to time.
Road made of car tires – safe way site arrangement. Even after a heavy rain, the rubber dries quickly, and it is almost impossible to slip on it.
Easy to create with your own hands, perhaps, is the main advantage of a garden path made of tires.

The only drawback of this material is that it requires a large amount. But this is not a problem either, because you can go to a service station for unnecessary tires.

Ways to use tires

To create paths in your summer cottage, you can use 2 options:

arrangement using car tires;
usage rubber tiles, which is obtained during the processing of rubber tires.

Path-ladder made of car tires

A ladder path is suitable for arranging uneven territory.

For example, along such a path it will be convenient to go down to the pond located in the background of the site.

Depending on the functional load of the stairs, you can lay out the path in 2 rows.

Making an original staircase does not require much time, and this is perhaps the most budget option.

Manufacturing process

The tires are laid flat on the ground, starting from the low part of the site and going up. To make the tires stable, they should be sunk slightly into the ground and soil should be poured inside the holes.

Advice! IN rainy weather This path can become slippery, so it is recommended to sprinkle it with gravel.

The ladder path absorbs well. Walking on it is much more pleasant than on asphalt or concrete steps. During movement, the load on the joints is small, so fatigue in the legs will not be felt.

We build at the dacha using our advice and step by step instructions. More details in the article.

Coniferous tree larch: planting and care, as well as tree propagation. about larch requirements for soil composition and other nuances of cultivation.

Garden path made of rubber modules

This track is convenient and practical to use. It is laid out like a puzzle.

At any time, the rubber modules can be moved to another location or their inclination can be changed. This will result in a new design.

Path made of rubber square tiles

To create such decorative path you will need to buy rubber tiles.

Of course, making a track will cost you a little, but it looks much better and more original than a strip made from a tire.

Laying rubber tiles

The manufacturing process does not take much time. You can simply lay out rubber tiles in a checkerboard pattern directly on the grass. Squares can be pressed down with decorative stones anywhere.

Over time, the tiles will lie to the ground, and the beautifully protruding grass will harmonize with overall design. The video below explains how to cut a tire.

Path made of rubber rectangular tiles on a concrete base

Rectangular tiles can be used to create a path near a pool or around a fountain.

The same car tires are used in the production of “rubber mats”. Performance properties tiles are no different from tires; they also last a long time and do not slip.

And most importantly, with their help you can diversify the design and create a unique composition.

There is nothing complicated during installation. It is secured using special locks or bushings. When constructing a path from rubber tiles, you need to take into account one nuance: the thickness of the material.

Tiles whose thickness is less than 20 mm should be mounted on a solid base: cement screed, wooden flooring or asphalt surface.

At the very beginning, it is necessary to level the base, fill in all the depressions and remove bulges, cover up chips and crevices, the appearance of which was caused by external factors.

To treat the base, mix acetone and polyurethane glue, taken in equal quantities. Well, then, just your imagination.

When making a track, proportionality should be taken into account. There should be equal distance between the tiles. The space can be filled with crumbs. It will look beautiful if the path is made in the same style.

But not less interesting option It will happen if you fill the space between the tiles with multi-colored pebbles.

Do-it-yourself track creation technology

Every summer resident dreams of beautifully decorating the paths between the beds, or the approach to the parking lot, so that it is convenient to walk along them even in rainy weather.

It’s uncomfortable to walk on boards, and they don’t look nice; linoleum is a bit slippery, and slate can crack.

Therefore, to create a track you need to choose specialized rubber that will last longer than all these devices.