We make a slide for a child with our own hands: advice from the masters. Puppet theater at home. Unusual transformer tables for sand animation

The arrangement of the playground is impossible without a slide. But you need to choose the design very carefully and take into account all the nuances. This is safety, comfort, and ease of manufacture with your own hands.

Kinds

Speaking about the types of children's slides, we must first distinguish two types: garden and located in the house. Most often, home designs are placed in the bedroom. They can be made from arbitrarily chosen materials, even plywood or particle boards. On the street, this is unacceptable - the adverse meteorological effects are too strong there. But the basic approaches to the design of the design remain unchanged.

The difference may be due to the materials from which the slide is made. For her apply:

tree;
metal.

ease of assembly;
minimum occupied territory;
the possibility of obtaining a variety of forms;
convenience and safety;
seasonal versatility.

Plastic allows you to make slopes in the form of a spiral, pipe or wave. The excellent heat capacity of the plastic slope allows it not to overheat in the summer, and also to keep comfortable temperature in winter. The work is very simple, you just need to assemble the parts in accordance with the instructions. However, plastic is fragile, especially when it comes to cheap Chinese samples. She doesn't last long enough.

Often on the site near apartment buildings you can see slides made of metal. They are very durable and serve long time. Even with active use, the attraction will work long enough to be used by several generations. You can make a design with different heights and with an unequal length of descent.

However, before choosing such a structure for your yard, you must take into account its weaknesses.

Metal conducts heat very well. In the heat, it gets very hot, and when the cold sets in, the skiers freeze easily. This can lead to bad health consequences, even if they are not noticed in the heat of the game. You also need to remember that metal requires maintenance. And if the slope is made of steel, it may corrode.

Wood is attractive for many reasons. It is safe in ecological and sanitary terms. Wooden structures are relatively light and can be placed anywhere. Weather conditions do not prevent their use. But you have to understand that even the most best wood can be deformed from dampness and temperature changes.

For protection, special processing. However, it complicates and increases the cost of the construction process. In addition, it is necessary to carefully select the compositions for impregnation, since not all of them are safe enough. But wooden slide can be easily repaired with your own hands. And at the construction stage, you will not need to use a welding machine.

The large area occupied by the slide (especially along with the descent) requires a more thoughtful approach to the organization of this element of the playground. Limit yourself to choice suitable material it is forbidden. Often the hill is complemented by a house. Not only does it become another place to play, but it also provides shelter from the rain during the summer months. It is also worth mentioning that the types of slides differ both in the presence of a house and in the size of the structure.

Drawings and dimensions

In order to properly build a slide for children at their summer cottage, it is imperative to draw up drawings and diagrams. If the slope profile found on the Internet does not suit the slope, you need to turn it clockwise (to increase) or counterclockwise (to reduce) the angle. The steeper the slope, the more pleasant it will be for children. In addition, such a design will take less space, which is especially important in the country.

But when the slope of the slide is more than 40 degrees, it is necessary to carefully calculate so that the braking section does not turn out to be excessively long.

Usually profiles are drawn on a single scale, from bottom to top. At the same time, they try to ensure that the distances between the starting points coincide. After that, vertical secant lines are prepared, between which there should also be an identical distance. The angle of the slope is determined by how large the free space is.

If there is a wall, a pool or other dangerous places in the courtyard of the house near the descent, it is necessary to plan the construction of the steepest slide.

When drawing up drawings, it is required to take into account not only the available territory, but also the age of the children. So, if the design is designed for the category of 3-7 years, you can make a playing surface at a height of over 2 m. But at the same time, you will have to make metal barriers, the height of which will be at least 0.7 m. If children of any age can use the slide, fence openings may be a maximum of 0.5 m. In this case, the height of free fall must be limited to 2 m.

When a fall from an upper landing is likely, it is necessary to provide for the laying out of an impact-absorbing coating during the design. The drawings often do not indicate support structures. And also there may be no other elements of deepening. The form should be as simple as possible, since it is difficult to build a structure that is sophisticated in configuration. The drawing of the slide for the street should be made with such an orientation that the descent is not directed towards the carriageway.

Design

IN early age children's imagination itself does the main work. It is able to “colorize” a seemingly unremarkable element on the site, to present it as a fabulous space. But the intention of some adults to help the imagination, to push it in a strictly defined direction, is quite appropriate. And if it is difficult to diversify the slope, then the rise can be presented much more interesting than a simple staircase. Great solutions this kind can be:

slide in the form of a "tractor";
a house on a tree;
"locomotive".

How to do it yourself?

On the Internet, it is easy to find many schemes for arranging a children's slide. But one should seriously pay attention only to such drawings and drawings, where the barriers are shown in detail. Children of any age play selflessly and lose their sense of reality. Therefore, fences and railings must be mandatory. Special attention should be paid to the materials from which the slide is constructed as a whole and even its minor parts.

There are two main requirements: sanitary safety and minimal risk of fire. All wooden and metal constructions must be sanded to minimize the risk of injury. Thinking over the future structure and erecting it, it is necessary to exclude any slotted partitions and gaps. When playing, children do not follow where they stick their fingers and even their heads. It is useful to imagine the slide through the eyes of a child, and then it will become clear where the dangers may be hiding.

Step-by-step design of a sports equipment begins with the preparation of the descent. It is made from boards that match in length and width. The wood is carefully sanded to ensure safe descent. To connect the boards, bars are used, placed from below. The next step is to attach the side parts of the structure to the descent.

In order not to scrupulously calculate all the proportions, you can simply repeat standard sizes factory slides. It is 1.3 m in height at a slope of 55 degrees. The boards of the side parts are selected and placed so that the ends are in the upper part of the site. They act as handrails that you can hold on to before descending. The sidewalls are fixed on both sides with self-tapping screws so that they hold on to the base of the descent.

Important: the side parts should be thoroughly processed. All sharp corners are cut and even polished sandpaper. To spend less time and effort, you can simply take a grinder with a grinding disc. Next, you need to do the markup. At this point, you will need a drill for gardening.

The excavations in the ground obtained with its help are needed to install the timber. For your information: from below this beam must be smeared with mastic. Now the places where it was placed are being concreted. Only such a solution ensures the reliability and stability of the structure. It is recommended to mix the mortar with M500 cement in standard proportions.

In the upper part of the bars, grooves are cut with a saw. They are needed to put the strapping straps. The parts are connected with self-tapping screws. Planks solve 2 tasks at once: they increase rigidity and ensure the safety of children. Now you need to attach a pair of wooden crossbars to the frame.

A ladder is attached to them on one side and a prepared descent on the other. When this work is done, it is necessary to build a wooden floor. In its manufacture, boards are laid, attaching them with self-tapping screws.

Important: boards can not be placed close to each other. The gaps should be such that there is no danger of injury, but water leaves freely.

If you need maximum strength, joints wooden parts reinforced with steel corners. It is recommended to make the slide twice as long as it is high. When choosing a site, you need to look so that it does not end up in a lowland. When prolonged rains come, a "swamp" is formed there. All wooden and plastic parts are supposed to be impregnated with flame retardants.

But the construction of a wooden slide can take place in another way. An alternative scheme implies that they first remove all the soil and level the excavation. This is necessary if there is fertile land - then it will not be empty and will benefit somewhere else. Next, the site is covered with sand and after a while, when it settles, the entire territory is rammed. This time is not worth wasting, you can:

prepare a tree;
dry it;
sawing according to the drawing;
sand;
impregnate with protective components.

Steps, handrails, railings and boards that will be needed for the construction of the "tunnel" are painted twice with enamel. In the interval between staining, they need to be sanded. This completes the preparatory phase. It's time to build the foundation: in holes prepared using garden drill, put fittings. It will certainly be verified according to the construction level.

When the reinforcement is placed, it is immediately concreted, and the corners are welded on top. The pillars that will be placed at the base must be cut in certain places. These recesses will allow you to fix the beam on the corners with self-tapping screws. Further, the pillars are connected to each other with the help of jibs. The ladder is made like this: stringers are attached, and then steps are stuffed over them.

But the ladder cannot be used normally if it is not supplemented by a launch pad. When this work is completed, it is required to prepare the base of the descent (it is made of timber). A steel curved profile for the ramp is installed. A plywood shield is placed on top of the base under the slope. A sheet of iron is nailed to this shield.

The outer edges of the sheet are folded and fixed to the profile. Otherwise, injury is inevitable. Now you can cut the gaps in the boards and wrap the edges of the sheet there. A boardwalk is being prepared under the slope. The sides are sheathed with plywood. Now you can:

put boards;
complement the stairs with railings;
build hipped roof, cover it from above with plywood.

sheet of plastic;
linoleum;
galvanized steel 0.05 cm thick.

Laminate for slopes is not advisable to use. Under constant load or simply in contact with water, it is easily deformed. And here are some more recommendations:

you can increase the protection of wood from moisture by polishing with wax;
to cover a wooden slide Oil paint much worse than acrylic compounds and varnish;
you can not put a slide near poisonous plants and honey plants;
you must immediately look so that there are no pipes and electrical appliances nearby;
you can not orient the slope towards the roadway, fence or main wall.

Beautiful examples

You can list the rules for building slides and study the nuances for a long time. But it is much better to take the initiative and focus on ready-made design ideas. The photo below shows a simple light-colored slide built almost entirely of wood. Only the surface of the slope is lined with sheet iron. At the same time, the protective sides are completely wooden. Contrary to the fears of some people, this decision does not look dull at all.

But you can also make a multi-colored colorful design, even complemented by a rather long transition between ascent and descent. A pair of tented buildings allows you to hide from not too heavy rain. There is an even simpler version in which the entire surface is made of wood. This design should be chosen when only functionality is needed, and not bright appearance.

How to make a slide with your own hands in one day, see below.

Do you think children's play is unsafe? Are you afraid that your child might get hurt while looking for adventure? The best way out of the situation is not to ban, but to provide a safe place to play! Moreover, making a children's slide with your own hands is not so difficult. To do this, you need a minimum of material, construction tool and a little imagination. A practical tips on construction, structural drawings and recommendations regarding the choice of building materials can be found below.

What you need to know to build a children's slide

The proverb about the need to measure several times before cutting off is especially relevant when building a play complex for a child. After all, mistakes in this matter are unforgivable!

Playground slide with swings

Five golden rules for the game slide

First of all, a children's slide should be safe and comfortable:

The descent must necessarily have a “brake platform” - a section where the slope is parallel to the surface of the site. Otherwise, the descent speed will not decrease, which may cause injury to the child.
The length of a do-it-yourself children's slide should be exactly twice as long as the height of the structure. So, if the length of the slope is 5 m, the height of the launch pad cannot be more than 2.5 m.
Within a radius of 1 m near the descent zone there should not be any buildings or fences. This is necessary so that the child cannot hit, having accelerated strongly.
It is necessary to provide a special coating in the descent area (sand, rubber mats, etc.). IN rainy weather there should not be a swamp!
If a sandbox or a hammock is placed under the structure, you need to sew up the “ceiling” in advance and make a roof over the launch pad (to drain water). Otherwise, sand from children's legs will fall on the heads of those who are located below.

How to choose material for a slope

The choice of materials for covering the descent is not so great. And, given the requirements that ensure the safety of the child, it is completely narrowed down to several options. But, before listing the features of these materials, let's figure out what it is impossible to make a children's slide from with your own hands:

Polycarbonate (especially cellular). This material, firstly, does not slide well, and secondly, when broken, it forms dangerous chips. In addition, in the summer, polycarbonate expands, forming waves. Therefore, the slide in hot weather will quickly become unusable.
PVC panels. Very fragile material that is not able to carry harsh winters.
Glass mats. Categorically not recommended for contact with the skin of a child.

Winter slide made of monolithic polycarbonate

How to achieve a "mirror" wood surface

Building a wooden children's slide with your own hands is a reality! But only if you are willing to set aside a few days to make a slippery wooden ramp. Indeed, in order to apply several layers of yacht varnish and sand the surface in between applications, it will take a lot of time.

What is attractive wooden slide

Advantages of a wooden slide:

The child will be surrounded by environmentally friendly, natural materials.
The surface will not heat up as much in the heat as, for example, metal.
In winter, a wooden slope can be filled with water and turned into an ice slide.

Disadvantages of a ramp made of wood:

If there is sand on the site, then lacquered surface will fall into disrepair very quickly. Children will bring sand on their clothes and scratch the stingray with it like sandpaper. So be prepared to renew your coverage every year!
The slightest oversight while grinding the surface - and the baby is provided with splinters and scratches after riding.
Sliding speed by wooden surface in any case, it will be low, which will quickly make the wooden slide uninteresting for growing children.
In the summer, it will not be possible to convert the slide into a water park, that is, to supply water to the slope.

A selection of drawings of a children's slide made of wood for DIY:

A simple drawing of a wooden slide

Low slope for small children

Game complex with a slide

simple model

Advice! Instead of wood, it is better to use Finnish plywood to cover the slope of the slide. It is much more moisture resistant and perfectly tolerates the effects of precipitation.

Secrets of the slippery surface

A few secrets on how to make a children's slide made of wood really slippery:

Wooden descent (dry and sanded) can be coated with a special oil that protects the surface (for example, "Pinotex"). This must be done in several layers. Thanks to this procedure, the tree will not lose its smoothness, and moisture will roll off well without destroying the surface.
Layer-by-layer sanding of wood after each application of varnish will help to achieve the effect. mirror surface and make the slide really slippery.
Plywood slope can be covered liquid acrylic used for bathroom refurbishment. In addition to excellent glide, this option is also good because you can choose almost any color of the coating! But it should be remembered that scratches form quite quickly on it, into which dirt will invariably accumulate. This will not affect the functionality of the slide, but the appearance of the structure will be spoiled.

Escape from polished wood

Advice! The joint of plywood sheets looks much more aesthetically pleasing if their edges are sawn off with a jigsaw at an angle of 45º. In this embodiment, the sheets are arranged as if overlapping, and one element “creeps” onto the other.

Metal coating - we take care of the safety of the baby

A ramp made of stainless steel or galvanized sheet is a “classic of the genre” during the construction of a do-it-yourself children's slide. But this solution also has its drawbacks.

Firstly, in order to cover the entire slide, you must either overlap or spend money on a much more expensive sheet of metal bigger size(sheets are available in lengths of 2.5 and 6 m). There is a third option - to allocate time to search for a construction company that will agree to "cut off" the necessary piece of stainless steel from the existing roll.
Secondly, stainless steel (like other metals) gets very hot in the sun. Therefore, it is recommended to place the ramp on the north side in order to reduce the intensity of lighting of the structure. But such a layout is not always possible on the site!
Thirdly, thin steel is very sharp and completely unsafe for a child. An inaccurately bent corner can cause serious injury to the baby! Therefore, it is necessary to bend the sheet very carefully, firmly fixing it to the base shield.

Metal slide with handrails

Advice! Instead of a galvanized sheet to cover the slide, you can take an alucobond (aluminum panel) and attach it to liquid nails. The advantage of this solution is color palette material!

Secrets of a good metal slide:

The shield under the stainless steel sheet should be perfectly flat, without protrusions and drops. After all, stainless steel is extremely thin and does not compensate for surface flaws. For this, it is better to pre-sheathe the boards of the structure with fiberboard boards.
It is not recommended to buy a mirror stainless steel, as it heats up much faster and more strongly on sunny days. Much more best option- polished stainless steel.
The sheet should be much wider and longer than the slide itself. Indeed, for the safety of the child, this coating around the entire perimeter must be bent and hidden under a kind of baseboard or board.

Advice! It is necessary to fasten a sheet of metal only along the edges (to the sides and bottom). It is absolutely impossible to make fasteners on the surface of the slope of the slide!

Slide from flooring - cheap and cheerful

Another interesting and inexpensive option is to cover the slide with a sheet of linoleum. The advantages of this solution are obvious:

the material is relatively cheap (you can buy scraps that are sold at half price);
under linoleum is not needed ideally Smooth surface due to its thickness and softness;
the base does not rot under this material, it protects the tree from moisture and temperature changes (if linoleum is on the sides, in summer the slide can be made water);
linoleum softens impacts and does not form dangerous sharp corners, chips or splinters, as other coating options.

Linoleum slide suitable for home

But such a slide has enough disadvantages:

the coating must be changed annually due to its rapid wear;
in very hot weather, linoleum can melt, which is dangerous in terms of getting burned;
the sliding speed on this material is quite low;
the design with linoleum does not look very aesthetically pleasing.

For optimal glide, you can provide felt or felt mats for skating.

We build a wooden slide for a child - step by step instructions

The dream of every child is a multifunctional playground with which you can realize any ideas for games. So, step-by-step instruction to build a children's slide with their own hands.

Competent preparation is the key to successful construction

Preparatory stage:

Remove fertile soil at the construction site and level the soil. Fill the site with sand and let it settle, compact (it is advisable to complete this stage in the fall, and start building the slide in the spring).
Prepare wooden blanks (kosour, railings, boards for steps and "tunnel", timber for the base): if necessary, dry everything, saw it to the selected dimensions and carefully sand it, and then impregnate it with a protective mixture.
Paint steps, handrails and boards for the “tunnel” with multi-colored enamel in 2 layers with intermediate sanding.
From the 12th plywood, cut out the side elements (for lining the tunnel) and the sides of the slide. Treat the elements with impregnation.

Technique for mounting the base of the structure

Frame assembly:

Build a foundation. To do this, it is necessary to make holes with a garden drill, install reinforcement in them according to the level and fill everything with concrete.
Weld the corners to the reinforcement. In the pillars for the base of the slide, make cuts and mount the timber on the corners, securing everything with self-tapping screws. Connect the poles to each other with braces.
Make a ladder: fix stringers (preferably added on the back side of the board for additional structural rigidity), fill steps on them.
Mount the launch pad to which the ladder leads.
Next, make a base for the descent from a bar and install a curved metal profile (25x40) for the slope.

Bearing structures

The final stage - we finish the construction

Do-it-yourself ramp and sheathing for a playground for a playground:

Lay a plywood shield on the base for the slope and make a galvanized iron flooring. Bend around the perimeter of the sheet and attach from below to metal profile. In the boards that form the platform, cut a gap and also wrap the iron flooring there.
Under the slope, make a tunnel from the boards. Sew up the sides with plywood.
Install the sides on the slide and the railing on the stairs.
Mount the pitched roof and cover it with pre-finished plywood.
Sew up the side parts of the structure with plywood sheets and cut holes in them for a climbing slide.

Organization of the slope and sheathing of the slide

Creative slides - we make the dreams of a child come true

Children's imagination is strong and sometimes incomprehensible. In the imagination of a child, even the simplest hut can easily turn into a beautiful castle! Therefore, for fun, a simple descent with a ladder will be enough for kids. However, there are a lot of options on how to make a children's slide with your own hands in an extraordinary way and with fiction - examples in the photo.

Downhill Treehouse

Protected by a stone lion

Advice! In order to keep interest in the slide for a long time, it is desirable to provide additional entertainment elements on the launch pad.

The playground is the dream of every child aged 3 to 13. And in order for the play area to meet the changing needs of children, you need to think through all the details at the planning stage. For this, you may need to invite a specialist who will save you from having to make a children's slide with your own hands. And then a real gaming complex will appear on your site - safe and comfortable.

Video: do-it-yourself children's slide

Children carry a powerful charge of energy, so the playground is an indispensable attribute of any suburban area where there are children.

Absolutely any number of entertainment items can be installed on the site. It all depends on the financial capabilities and wishes of the owners.

You can also additionally please your children by performing entertainment with my own hands. An example is a children's slide. Absolutely simple in construction, and will please for many years, if you take the process seriously.

The process of creating a slide and the end result will serve as an additional source of joy with minimal cost. Children's slide in the country will be the best entertainment for children.

wooden slide

Such a building can be placed even inside the house, if the size of your area allows. When building a slide, it is important to remember that you need to use environmentally friendly raw materials, since the child will be in direct contact with it. Best for entertainment suitable for children wood slide.

But if you decide to build from other materials, then make sure that there are no harmful components.
This also applies to bright colors, which usually decorate the hill.

It is important to control such inserts as to the content harmful substances and fire resistance.

Install strong railings regardless of your child's age. In any case, this will save you from unwanted injuries and falls. Also, the railing will act as a balance support for the child.

Wooden slide safety

Children's wooden slide in the first place should be a safe object for play. It will perfectly fit into any exterior and interior of the house due to its calm style decision. The first will not be evident, but will only emphasize the previously created style.

In summer, in the sun, a slide made of wood heats up slowly, without burning the child on contact, like, for example, slides made of metal. This is a big plus when children often play outside.

Such a slide can be installed anywhere on the site, and not only where there is always shade and coolness. On the metal, the child will be burned, and the tree will only become warm in direct sunlight.

Even if a plastic slide for the street is more convenient, then its weak frame will not be able to serve you for a long time. It will crack, and the child may be injured from riding such a slide.

The location of the hill on the site

The slide must be located away from extraneous buildings and trees. Such a precaution will not be superfluous, because it will make your baby's games more comfortable.

You can also dot the perimeter around the slide with grass or cover it with a special artificial turf. The descent from the hill will be softer in the future and the child is less likely to fall.

The base is best fixed or concreted. Even if the child cannot move the structure with his own hands, then from frequent skating, she herself can tip over.

The height of the structure should depend on the age of the child. It is advisable not to exceed more than 2 times the height of the one who will use it. There should be no gaps, openings, holes in the structure.

Take this seriously, because children, actively moving, do not notice small obstacles. The child may get caught or stuck.

Do-it-yourself slide

If you are interested in the question of how to make a children's slide with your own hands with high quality, then you need to follow all these tips. Then the child, riding down the hill, will be completely safe and will be left without unwanted injuries.

Note!

If it's about wooden structure, then you can develop drawings of a children's slide yourself. Choose the color, texture and even shape of your own choice or use already ready photo children's slide to complete the picture.

Of the materials you will need nails, boards, slats and wooden bars. Also take care of the presence of a hammer, saw and planer. These are the most basic tools for the job.

You can simplify your construction with the help of manual or electric drill. When assembling the structure, carefully check that there are no nails sticking out anywhere.

The slope may be from plastic material. After all, a wooden ramp can eventually start up hooks if it is not treated with anything.

But with a metal slide, everything is much harder. Here you will already need a machine for welding metal. If you decide to make the ramp metal, then paint it with a special paint that will not allow it to heat up quickly.

Note!

DIY children's slide photo

Note!

Skiing from the mountain is a favorite pastime for children of all ages and only adults can provide them with convenience and comfort in this matter, and they will have more than enough fun and enthusiasm. A slide can be built from a variety of improvised materials, and from which will be discussed in this article.

What is needed for the slide

In order to make a slide with your own hands, you can use metal, plastic, wood, as well as improvised materials left over from the old cabinet and desk. At least with a little imagination, you can build a real miracle from them and put them in the corner of the children's room to the delight of your baby.

You can make a slide for your child from an old desk.

For this you will need:

lacquered cabinet door;
plywood sheet;
small boards, which can be pieces of a shovel handle, legs from a table or chair.

Manufacturing steps:

Making a hill of snow

Making a mountain with your own hands out of snow is very simple. The main thing is to wait until the temperature on the street approaches the mark of about 0 ᵒС. And, of course, the presence of a sufficient amount of snow is important.

And you will also need:

shovel made of metal or plastic;
construction spatula, scraper;
bucket or watering can;
warm gloves.

Manufacturing steps:

The primary task is to determine the location of such a homemade attraction. To minimize injury, it is imperative that you roll out onto level ground so that
the child could roll evenly until it came to a complete stop.
The height of the slide is determined based on the age of the riders. For crumbs up to 3 years old, an elevation of 1 meter high will be enough, and for older children, you can build a higher slope, the main thing is that the slope of the slope does not exceed 40 degrees.
Having rolled up several large balls, form a foundation out of them future construction. If you plan to make a sufficiently high slide, then you should consider how the children will climb it. The problem can be solved by making the same snowballs that can be laid at the foot in the form of steps.
Use a spatula and scrapers to level the surface of the steps and leave the structure until the onset of cold weather.
Fill the hill should be in the cold. It is not recommended to use a bucket or a hose for this, as there is a high risk of large holes forming. Better to use regular garden watering can or the one that housewives use to water indoor plants.
On a piece of plywood or a shovel with a wide working part, slowly pour water onto the structure. And you can cover the elevation with a large piece of cloth and pour through it - this will help the liquid to be more evenly distributed over the snow.
If, apart from the bucket, there was nothing at hand, then the water in it must be mixed with snow and cover the surface with this same slurry, leaving it to freeze overnight, and repeat the procedure in the morning.
Everything, the hill is ready. If necessary, potholes on it can be trimmed with a spatula.