Country house sandwich. Sandwich panel construction - do-it-yourself house projects, how to build a private cottage. Site preparation for building a house

The market for materials for private housing construction today is very rich: there are bricks, and, and cellular concrete, and much more. But if the question arises of a quick, easy and economical construction of a cozy, warm, reliable home, then the choice of building materials is significantly reduced. And here comparatively comes to the rescue. new technology, quickly gaining popularity - the construction of houses from sandwich panels.

What is a sandwich panel?

Sandwich panels are a popular building material today, which is manufactured in the factory on special high-performance equipment. The panel is a structure of three layers, a kind of “sandwich”: between two sheets of coating there is a layer of insulation, and the thicker and better the insulation layer, the more comfortable the conditions in the new house will be.

Different manufacturers use different materials for coating: galvanized steel, aluzinc, moisture-resistant oriented strand board, etc. Mineral wool, polyurethane foam, fiberglass, expanded polystyrene, etc. are used as insulation.

Depending on the place of application, sandwich panels are wall and roof. Wall, in turn, can be smooth, simple profiled or decorative profiled (log or siding). Roof panels are profiled on one or both sides.

Where can sandwich panels be used?

Sandwich panels are used very widely in private housing construction, while houses can be not only one-story, but also multi-story. From this material, you can quickly and easily build a house on garden plot, summer kitchen, utility rooms. First you need to build metal carcass, and then fix the sandwich panels on it.

No less popular is the technology of erecting public buildings from sandwich panels: offices, warehouses, shops, restaurants, gyms, temporary shelters for workers, gas stations. And this is fully justified: not only are such buildings built quickly and economically, if necessary, they can be easily upgraded, add an extra floor, dismantle, transport to another place, and assemble again.

Advantages and disadvantages:

The advantages of sandwich panels include:

• erection speed;
• ease of construction (does not require a powerful foundation);
• design flexibility for mobility and upgrades;
• profitability (a house made of such panels will cost two or even three times cheaper than a brick one);
• fire safety;
• environmental friendliness;
• high strength;
• excellent heat-insulating and noise-insulating properties;
• possibility of installation work in any season.

Disadvantages of sandwich panels:

• for the construction of panels, long-term heavy loads are contraindicated;
• if the installation is carried out in winter time, icing may appear at the joints;
• in the presence of basalt in the composition of the insulation, strength and thermal insulation characteristics material;
• the service life of the structure of sandwich panels is not more than 50 years;
• the carrier requires protection - metal from corrosion. And wooden - from fungus and decay;
• the combination of OSB panels with expanded polystyrene or polyurethane foam is a fire hazard.

How to choose?

When choosing sandwich panels for building a house, you should pay attention to the following factors:

Type of insulation. Expanded polystyrene is an environmentally friendly, durable material that does not allow water to pass through and retains heat well. But it's a fire hazard.

Polyurethane foam - has the lowest thermal conductivity, good waterproofing properties. It is durable, impact resistant chemical substances. Minus - fire hazard.
Mineral wool is environmentally friendly, non-flammable, safe, retains heat well. Minus - low resistance to moisture, therefore, requires additional waterproofing.

Panel thickness. An increase in the volume of the slab leads, on the one hand, to an increase in thermal insulation properties, and, on the other hand, to a decrease in usable living space, complicate installation, and an increase in the cost of the material. Therefore, it is necessary to carefully calculate optimal thickness panels.

Panel geometry. Determined by the design of the building.

Manufacturer. Only a manufacturer with sufficient experience, qualifications, a good production base and modern manufacturing technologies can guarantee the quality and durability of their products. On Russian market there are about 200 manufacturing companies of this material for construction.

The largest of them are Ruukki-Vental (Kaluga), Electroshield (Samara), Mosstroy-31 (Moscow), KZLK (Novokuznetsk), Thermosteps-MTL (Samara), Trimo-VSK (Vladimir) and others. Imported products are mainly comes from England, Finland, Poland, Korea.

Sandwich panels are a building material that has great prospects and is replacing traditional materials.

Prefabricated houses and other structures made of special sandwich panels have gained popularity in the current construction. Block buildings have proven themselves with better side in the construction of residential premises and in the construction of shopping and sports centers, markets, hangars, warehouses, etc. Buildings made of such material are economical and have a number of other advantages. There is an opinion that this material will become massive in modern and future construction.

The best reviews of sandwich panel houses come from users

Perfectly proved themselves in the construction of sandwich panels. This one is from several layers (3-4). Rigid sheets are installed on both sides different materials(galvanized metal sheet, PVC, OSB or fiberboard sheets, magnesite tiles). One or more layers of filler are laid between the layers. All components are glued polyurethane adhesive consisting of several components.

Cold or hot pressing of all components provides finished blocks of sandwich panels. Both outer and inner balls of such products are made of various materials. Moreover, the construction industry is constantly improving, using all new materials as components, and sometimes a combination of different fillers.

When completing building sandwiches, they most often use:

• mineral wool;
• polyurethane foam;
• polystyrene foam;
• fiberglass;
• polyisocyanurate foam.

Excellent reviews about houses made of sandwich panels exist among builders and owners of such buildings.

Positive feedback on prefabricated houses

Often, in the vicinity of large cities, literally in a few months, cottage settlements built in a block way grow up. Such buildings have positive reviews about prefabricated houses among developers and consumers. This type of construction is suitable for the investor due to the cost-effectiveness and speed of construction. Residents are satisfied with the properties:

• excellent thermal protection;
• incombustibility;
• aesthetics;
• ergonomics;
• good sound insulation, etc.

Benefits of building from prefabricated blocks

The biggest advantage of building structures from block systems is the speed of erection. Residential buildings are being built at a certain capacity. Have under them foundation large shopping centers, bus stations, airports. All reviews of sandwich panel houses are positive. Small and temporary structures of warehouses, hangars, construction cabins can be installed without a foundation. In a few days, such a structure can be dismantled and moved to another place. Such movement is also an advantage of block construction.

Compared with capital construction made of and similar materials, buildings made of sandwich panels are very economical and easy to use, easy to transport and install. They provide excellent thermal insulation and sound protection. Many units contain non-flammable or only fusible fillers, which will prevent fire and serve as a permit from the fire services to put the facility into operation. Therefore, there are excellent reviews about prefabricated houses from consumers.

Variety of sandwich panels

The most common in housing construction are. They include OSB chipboards on both sides, and between them - polystyrene foam insulation. This composition of components for housing construction has the most best reviews about prefabricated houses. In commercial construction, sandwich blocks are most often used, having a base made of galvanized sheet on both sides. For such blocks use a profiled or conventional a metal sheet from 0.55 mm to 1 mm thick. The heater in this case is most often mineral wool or other fillers. The main thing is that reviews of houses from sandwich panels have no complaints.

Plasterboard sandwich panels

IN Lately Sandwich panels have become popular, the surfaces of which consist of gypsum boards. Rigid polyurethane foam or others are used as a filler. Partitions are installed from such blocks in residential buildings and other premises. This material can be separated workplace storekeeper from the space of the entire warehouse. Many stores that rent certain square meters, separate the space with the help of such plasterboard partitions.

Cons of building a residential building using new technology

Summing up, I would like to note that, as in any field, this technology has its drawbacks:

1. Difficulties in finishing. Not every finish is applicable for this type of construction. Concreting, plastering and gating will have to be excluded. It is recommended to lay electrical wiring on top and sheathe the walls with drywall, install suspended or stretch ceilings.
2. You need to carefully select a reliable panel manufacturer, otherwise you risk ending up in a new, but cold or damp house.
3. It is necessary to strictly observe the construction technology. Most often, prefabricated houses suggest, the assembly of which has its own characteristics.
4. The subsequent sale of a residential building made of sandwich panels can also cause difficulties due to the lack of awareness of citizens and the experience of living.

The widespread construction of houses from sandwich panels began to spread in our country relatively recently. Western countries use this technology for many decades for the construction of not only private low-rise buildings but also for the construction of high-rise buildings.

In this article, we will look at what kind of material it is and what are the pros and cons of houses built using this technology?

What is a sandwich panel and what does it consist of?

The main idea of ​​the developers of this material is to get a building element with which you can build a house quickly and inexpensively. The technology of building houses from sandwich panels allows you to get a full-fledged housing of any complexity, in a short period of time, using a minimum of material and physical costs.

The term "sandwich" itself has nothing to do with fast food. Since this building material consists of several layers of sub-materials fastened together, this name arose more as an association with burgers.

Sandwich panel- This is a three-layer building material made of plastic, metal and insulation (wood, mineral wool, polystyrene foam). Usually, inside there is a special filler, which is closed on both sides with a lining. The result is a convenient element with which you can build walls, ceilings and floors. Also, this unique building material is used not only for finishing walls and roofs, but also for high-quality insulation and sound insulation of the facades of finished buildings and structures, as well as for protecting them from fire.

Various materials can be used as a filler. Among the most popular options are the following:

• polyurethane foam- This is the most common filler for sandwich panels. The material does not burn or rot. At the same time, it is an excellent heater;
• Styrofoam- This is a less common filler option. Such panels are slightly cheaper than the previous ones;
• Fiberglass. Such a filler is used in those structures that will be installed in fire hazardous buildings;
• Mineral wool. Such sandwich panels are considered the cheapest. But even they are distinguished by their lightness, ease of installation and good thermal insulation qualities.

The outer layers can also be made from various materials. The most popular are OSB-plates and metal. In principle, both options are quite strong and durable. However OSB boards a little cheaper metal version. But the second option has more long term operation.

How are houses and cottages built from sandwich panels?

The responsible process before starting the construction of houses, according to the technology, is the creation of a solid foundation and a frame for covering it with sandwich elements.

The whole process of building a residential building can be divided into stages:

1. Walling. The beginning of the process will mark the laying of the guide board, its dimensions correspond to the dimensions of the sandwiches. For the exact horizontal position of the board, builders use the building level;
2. Installation of corner sandwich panels. The process should start from the corner. The installation of the first element is an important task; further work on the installation of subsequent sheets depends on it. The guide board is equipped with special grooves that allow you to securely fasten each sheet of the sandwich panel. Corner sheets are fixed with self-tapping screws. The distance between fasteners must be at least 15 cm;
3. Installation of sandwich panels. After completing the finishing of the corners, proceed to the processing of the walls. The panels are fastened to each other with self-tapping screws, keeping the distance between the fasteners in height of at least 50 cm and carefully making sure that there are no gaps between the sheets. Using this technology, all subsequent sheets of finishing material are installed.

In the process of assembling houses from sandwich panels, there should not be a rush, all work is carried out gradually. It is important that, before fastening, each subsequent element is compared in size with the previous one in order to immediately identify inconsistencies and correct them.

To fill the space between the guide board and the panel, sometimes use construction foam. After completing the finishing of the base of the house with sandwich panels, they begin to build other elements of the house.

Advantages of building from sandwich panels

(1) First of all, this foundation savings. It is known that about half of the cost of building a box at home falls on foundation work. When building a house from sandwich panels, you can use a columnar foundation, a shallow strip foundation or a light slab foundation.

(2) Construction speed. Such a house can be assembled according to ready-made drawings in a few days. Typically, manufacturers of such structures bring walls to ready-made and already on the site fasten them together.

The box itself at home can be put up in just one to two weeks. Of course, much will depend on the size of the building. But in any case, the construction will take much less time than if you used the usual Construction Materials.

(3) The third advantage is heating savings in future. Sandwich panels are warm enough to build homes in the coldest regions of the country.

(4) Buildings made of sandwich panels are quite durable. Despite the fact that such houses are considered to be not the most durable compared to stone ones, practice shows that, with the right construction technology, they can be used for decades. Manufacturers of such houses in a special way dry the timber to such an extent that the wood is practically not amenable to aging.

(5) I have an opportunity increase usable living space, since the thickness of the walls of cottages made of sandwich panels is much less than in houses built of stone or blocks.

(6) The sixth advantage - Cottages from sandwich panels can be built in almost any weather conditions. The construction of the house can be carried out in winter, regardless of the ambient temperature;

(7) The seventh plus - unlike wooden houses, frame structures do not settle. It means that Finishing work you can start immediately after the construction of the box;

In addition, if necessary, it is possible to disassemble the house and reassemble it in a new place. In addition, do not forget about the cost. All materials and works will not hit hard on your wallet. Houses made of sandwich panels are much cheaper than their counterparts. This feature is strongly liked by domestic developers.

The disadvantages of this material

First of all, it is worth mentioning environmental friendliness. Some unscrupulous manufacturers of wood-based panels use formaldehyde resins to bind the fibers. This substance, being very toxic, when evaporated, can greatly affect the health of people living in such a house. Make sure that the manufacturer of sandwich panel houses has a contract with a bona fide supplier of wood-based panels.

Houses made of sandwich panels are significantly inferior in terms of durability to wooden and brick buildings. Such buildings need to be overhaul after a couple of decades of operation. But, even if you constantly maintain all the structures in the right condition, you should not expect from such a house that it will stand for a hundred years.

Another disadvantage that also affects long-term operation is the possibility of mold. Sandwich panels are quite tight, so air ventilation is poor. From here there are places where moisture stagnates. The result of this is the appearance of mold. Therefore, such houses must be carefully protected from moisture and artificial ventilation systems must be created.

Well, don't forget about fire safety. The materials used often burn well. A completely wooden house, in the event of a small hearth, will burn to the ground in a matter of hours.

Often the manufacturer claims that the wood is treated with a special solution that makes it non-combustible. But be aware that such solutions do not exist in nature, and all such events are carried out only in order to reduce the burning rate. It is also worth remembering about the foam, which does not burn, but evaporates. Styrofoam fumes can also cause irreparable harm to health.

Therefore, it is necessary to carefully choose the heating system at home and it is highly desirable to install a modern fire fighting system with panic button.

Conclusion

It is possible to build a cottage or a house from sandwich panels, and often this is the only reasonable option for a particular area, taking into account the available budget. However, care should be taken to fire safety and make sure the quality and environmental friendliness of the material of the panels. You also need to carefully approach the selection of a construction contractor, make sure that you have a license, relevant experience and positive reviews.

A sandwich panel is a design that consists of a heater and a few words roofing material and is used as the main building material for the construction of buildings of varying design complexity. For the manufacture of sandwich panels, only proven and suitable materials are used. The main material for the cover layer is usually "corrugated board" (galvanized steel coated with a polymer).

Heaters

When choosing sip panels, it is still better to seek help from specialists. But if this is not possible, it is worth studying their characteristics.

There are three main types of heaters:

• polystyrene (polystyrene foam);
• mineral wool (basalt insulation);
• polyurethane foam.

And each of these heaters has its own advantages and disadvantages.

Polyfoam is positioned as a heater, distinguished by its durability. In addition, it is an environmentally friendly material. Possesses properties of water resistance and is not afraid of the sun. But at the same time, such material is very flammable and burns quickly.

Mineral wool practically does not burn and is also harmless to health.

This insulation also tolerates biological and chemical effects well. But with a set of such important advantages, basalt insulation has a very low resistance to moisture.

Polyurethane foam is a poor conductor of heat and is easily flammable, but it has a high insulating threshold.

The thickness of the building material, and, accordingly, the price directly depends on the thickness of the insulation itself.

The issue price of the SIP panel is 1,300 rubles per square meter. Its thickness is 174 mm, width - 1250 mm, height - 2500 mm.

In our country and the CIS countries, sandwich panels of the following sizes are used:

12+100+12=124 mm;

12+150+12=174 mm;

12+200+12=224 mm.

OSB (OSB)

Introduction to the concept OSB boards should start with general classification. There are four main types of OSB. Each of them differs from others only in its indicators of moisture resistance and strength.

• OSB 1 is a board with the lowest moisture resistance strength. This type of plate is often used in the assembly of light weight parts. The advantage of these plates is their low price.
• OSB 2 - has a low moisture resistance threshold and at the same time high strength. Such plates are used mainly for the production of furniture, sometimes for load-bearing elements. Less commonly, OSB 2 is used in the construction industry, and then only for internal structures.
• OSB 3 is one of the most popular board types. These boards combine strength and moisture resistance at a nice price. They are used more often in construction for the construction of both facade and interior finishes. Sometimes OSB 3 acts as a roofing material or floor.
• OSB 4 - these OSB boards have the highest threshold of strength and moisture resistance. They are used for the construction of structures with a high level of load and in areas with high humidity.

Construction of houses from sandwich panels: advantages and disadvantages

Like any material, the use of sandwich panels has both its own and disadvantages.

First about pleasant. The main advantage of this building material is the conformity of its quality, which is evidenced by the high strength of the material, relative to the price. This factor plays a very important role in calculating the construction estimate. After all, the use of this material significantly reduces costs. Due to the lightness of the panels, the weight is lightened general design, which means that there is no need for a reinforced foundation.

See more projects of houses in the section “Projects of houses” on our website.

Do-it-yourself sandwich-panel house

The first thing that will be needed in this matter is the project of the future building. Should be given Special attention to its construction, not forgetting about the requirements and wishes. If it is not possible to build it yourself based on the complexity of the calculations, then there are a lot of companies ready to help in this matter. We will try to show you all the stages of construction in a photo report, with step by step instructions. But, all houses are individual, our photo can only be considered as an information guide.

By the way, SIP panels can be used to build not only houses, but also residential buildings. They can accommodate verandas or kitchens.

The next step is to order SIP panels or them. You can order them directly at the enterprise that is engaged in production. Here you can also view catalogs and choose everything you need for subsequent installation. When choosing panels, do not forget about the foundation - the foundation. For a structure made of such material, usually, the foundation is installed on screw piles.

Water supply, heating and electricity for the future house must be diluted even before the foundation is poured.

To avoid curvature of corners or mismatch in height, all panels must be checked for integrity and dimensional conformity before installation. If inaccuracies are noticed, contact the supplier for a replacement material.

After, you need to make it strapping using wooden beam. Then the corners are set and with the help percussion instrument holes are made. Using these holes, the beam is fastened to concrete with 12 mm anchors. Recommended distance 2.5 m. Further, the building itself is assembled on the established foundation. The assembly is started with a zero overlap, while the first SIP panels are laid on the timber.

Wall frames are assembled from timber. A mortgage board is fixed along its perimeter with special nails. The main thing here is to maintain vertical calibration and frame angles. After all, if you miss at least 1 mm somewhere, the wall will turn out to be a curve and there will be no possibility to correct it. After installing the frame, panels are applied to it.

After the construction of the general structure, the sealing of the holes begins. The joints and corners of the panels are filled with edged boards 25 * 100 mm in size. All cracks are sealed with foam.

Ceilings between floors and all supporting structures are best made of wood. You can use both timber and boards. Photos of the stages of construction are just below.

Foundation for a house from SIP panels

The foundation is, first of all, the foundation of the building. It transfers the entire load of the building to the underlying soil layers. In addition to the strength of the foundation itself, you need to consider:

• the total area of ​​​​support on the soil;
• the support capability of the soil itself;
• groundwater levels.

Experts consider the excessive abundance of concrete and metal in it to be the most common mistake when pouring the foundation.

The most popular types of foundation are:

• pile (pile-tape);
• columnar (column-tape);
• monolithic shallow slabs;
• tape deepening;
• tape deepening with a plinth.

But, it is worth noting that among this variety, for wireframe panel houses the best option would be shallow penetration.

Laying a strapping (crown) timber

For laying, a timber with a size of 2.5 * 1.5 cm is taken. Laying should begin from the middle of the foundation, while measuring its horizontal calibration. Next, the beam must be connected at the corners with a notch. After that, the details are fixed. For proper fixing, holes are drilled in the timber in a length of 1–1.5 cm with a diameter of 2 cm and the dowel is driven.

The fastening of the beam to the foundation is done with the help of anchor bolts with drowning. The fastening distance is about 1.5–2 m. The size of the bolts should be 35 cm long with a diameter of 1–1.2 cm.

Arrangement of the floor in the house from SIP panels

Another proof distinctive property Canadian technology construction, is the technology of arranging the floor.

Floors and ceilings are also built from SIP panels.

Although many contractors recommend laying a regular wooden floor with insulation between the joists and beams in such houses. These floors are reliable and more durable. In addition, this floor will be easier to disassemble or repair.

Building walls from SIP panels

When erecting walls, you need to carefully choose the source material, because the quality of the future home largely depends on its quality. The best option for outdoor work there will be a beam with a diameter of 15 cm. As for the height, here is a minimum of 1.5 m. For the inside, 10 * 15 cm is suitable. These are acceptable sizes that will help save on consumable, will minimize the number of seams and joints and achieve perfect smoothness of future walls. Assembling the walls is not easy, you need experience.

Before laying the timber in the crowns, all materials must be adjusted in accordance with the height and give them desired shape. For corner connections it is better to use the “half-tree” or “tied with a root spike” method. Connections of the outer parts are best done with a cut or on veneers. And it is better to connect the internal sections of both joints and corners with a half frame.

To begin, direct installation is necessary with the laying of a crown beam treated with an antiseptic agent into the foundation.

Arrangement of the roof in the house from SIP panels

The roof for a house built using this technique can be the most common truss. This type of roof is characterized by support in the form of grooves or Mauerlat, which are cut into beams on attic floor. The rafters are installed on the supports, the crate is stuffed on them and the roofing material is laid.

As for insulation, it is not necessary for a cold attic. But if the plans are to install an attic, then it is worth putting a heater between the rafters and covering it with a vapor barrier film.

In addition to the truss, a roof made of SIP panels is no less popular. For this type, the first step is to install the starting rafters, which are bolted to the Mauerlat. And only after that comes the laying of the panels. The panels are mounted on one side of the roof, gradually increasing the height in length with the ridge. As soon as work with the first skate is completed, you can proceed to the next one.

This installation method is more painstaking than traditional, but no less reliable.

Facade finishing

Facade finishing is the final stage of construction. Each owner makes it according to his taste and financial capabilities. Among the finishing options are now very popular: facing bricks, siding, decorative plaster.

Video

look interesting video about building a house from SIP panels.

What was done

Project: the Innsbruck project was adapted to the site and the wishes of the Customer's family, a decision was made to relocate the terrace.
foundation: based on geology and the architect's calculations, the house was built on a pile-grillage foundation.
ceilings: basement - reinforced concrete monolithic; interfloor - reinforced concrete floor slabs.
box: walls made of aerated concrete blocks, laying with masonry glue. Windows are made to order, with one-sided lamination, installation on site.
roof: metal tile.
exterior finish: walls are insulated with basalt facade insulation and plastered, finishing elements made of wood, made on site, based on TK-visualization, painted. Plinth laid out decorative stone.
interior decoration: decoration was carried out according to the design project, where the combination was taken as the basis decorative plaster with stone and wood. False beams were mounted on the ceilings.
additionally: a fireplace is installed and finished.



What was done

The very case when our Customer and we speak the same language and are inspired by the ECO high-tech style! Designer Ilya came to us with finished Project your future home! Our team liked the project - after all, such unusual and stylish solutions it's always a professional challenge!
We prepared estimates for Ilya and developed unique design solutions - all this allowed us to implement this project! Frame house made in our proven Canadian technology with 200 mm insulation along the entire contour! Outside, the house is sheathed with imitation timber. All windows are custom-made and laminated in colors according to the project. Additional accents are placed thanks to the professional coloring of imitation timber and the selection of colors.



What was done

What does it cost us to build a house? Indeed, having a team of professionals and knowledge - building a house from scratch is a matter of time! But sometimes the task is more difficult! We have introductory - an existing foundation, or buildings on the site, extensions to existing buildings and much more! For the Matsuev family, it was precisely such a difficult task. They had a foundation from an old burnt house, and a landscaped area around it! The new house had to be erected in a short time on the existing foundation. Dmitry and his family had a desire to build new house in hi-tech style. After careful measurements, a project was made that took into account the old layout, but had a new one. modern form with exciting updates! The house has appeared entry group, where you can sit at a table in cozy evenings and a complex but possible exploited roof in our lane. To implement such a roof, we called on our knowledge and modern building materials LVL beams, built-up roofing and much more to help. Now in the summer on such a roof you can arrange an unusual dinner or watch the stars at night! In the decoration, our architect also emphasized the minimalist and graphic high-tech style. Smooth stucco walls with painted planken details add personality to the wooden beams at the entrance. Inside, the house is finished with imitation timber, which is painted in different colors depending on the purpose of the room! Large windows in the living room kitchen overlooking the plot - created desired effect illumination and airiness of space! The house of the Matsuev family has graced our photo gallery in the country architecture section in high-tech style, in the style chosen by bold Customers with excellent taste.



What was done

Olga and her family have long dreamed of a country house! A reliable, solid home for life, which will perfectly fit into their difficult narrow section! With the advent of children, it was decided to realize the dream, children grow up quickly and in own house in nature, many opportunities and fresh air. We, in turn, were happy to work on an individual project at home in classical style from red brick with a bay window! After the first acquaintance with our company in a cozy office, we invited Olga to take a look at our existing construction site: evaluate the order and construction processes, store materials on the site, get acquainted with the construction team, make sure the quality of work. After visiting the facility, Olga decided to work with us! And we were happy to do our favorite work again to make another country dream come true!



What was done

Project: changes were made to the San Rafael project and redevelopment was made according to the wishes of the Customer.
ceilings: basement - reinforced concrete floor slabs; interfloor - reinforced concrete floor slabs
box: walls made of expanded clay concrete blocks, mortar masonry??? Windows inserted.
roofing: metal tile
terrace: rough enclosing elements are made, flooring is done.



What was done

Dmitry approached our company with an interesting draft design to calculate the cost. Our experience allows us to perform such calculations according to draft designs with minimal errors, no more than 2%. Having visited our construction sites and received the cost of construction, Dmitry chose us from among many of our colleagues in the shop to complete the project. Our team has begun to implement a difficult and expressive country project with spacious rooms and a garage, large windows and complex architecture. After the delivery of the project, Dmitry chose us as a contractor company, and we, in turn, wanted to do further work on the same high level! Since the object is large, Dmitry proposed a phased cooperation, namely, upon successful completion of the foundation work, we proceeded to the second part of the project - walls + ceilings + roofing. Also, the exact timing of construction was important for Dmitry, in order to speed up the construction processes, the team was reinforced by 2 experienced masons.
The box on a pile-grillage foundation was handed over right on time! The result pleased us and the Customer. All stages of work were coordinated and worked out for Dmitry and his individual project, from which all participants in the process benefited!



What was done

Project: The project of our company Inkerman was changed taking into account the wishes of the Customer's family, the house was planted on the site, taking into account the existing situation on the site and the relief
foundation: based on geology and the architect's calculations, the house was built on a reinforced pile-grillage foundation.
ceilings: wooden wooden beams, in places of large spans installation of LVL beams. The basement is insulated with 200mm basalt insulation; interfloor overlap with sound insulation 150mm.
box: box: walls made of expanded clay concrete blocks, mortar masonry. Windows inserted.
roofing: installation of metal tiles.
exterior finish: the facade is insulated with 100 mm basalt facade slabs, the facades are covered with facing bricks; color solution proposed by the architect and agreed with the customer.



What was done

The Krutov family decided to build spacious house for the life of the whole family!
From the idea to its implementation, Olga and other family members went through several stages! The choice of technology, a long work on the project, the construction of the foundation, the construction of a house with exterior finishes and then work on interior decoration! The frame technology was chosen as energy-saving, prefabricated and high-tech! Why did the Krutovs choose our company? They liked the quality of work at our construction site and the workers who gave a detailed tour! We also worked on the estimate for a long time, combining different variants finishes, comparing their cost. This made it possible to choose best option from a wide variety finishing materials and kits.
The project was created by an architect friend, but we had to work out the constructive part of it. After that, the most reliable and effective foundation was erected - UWB. Then work began on the box. A frame house with 200 mm insulation along the entire contour and a unique 300 mm roof insulation technology. Siding was chosen for the exterior spectacular combination flowers - coffee and creamy. The accents are placed thanks to the powerful roof overhangs, interfloor belt and large windows!



What was done

When you decide to become a happy owner own house and move to a new home permanent residence, first of all, you think about what the house will be like; what to build it from; how much will it cost and most importantly, WHO will do all this?
Alexander came to our company with the desire to move to his own country house. He liked the Avignon project and there was already a strip foundation. After the initial visit to the site, measurements and examination of the foundation, we gave our conclusions and recommendations. Strengthen the foundation, change the project and adapt it to the dimensions of the existing foundation! After agreeing on the cost, it was decided to build in the winter. Alexander received as a gift reinforced concrete floors, one of the leading construction teams and a house according to the project he liked, which stood on the site with exterior decoration by spring! Alexander watched every stage of construction, regularly visiting the construction site and was pleased with the result, and we were satisfied with our work. This is an individually designed Avignon project, implemented in stone technology with external insulation and siding!



What was done

Each house is a separate story of creation and implementation! Once we built a house for good people and they recommended us to someone else good man! Rumyantsev Andrey came to our company with a desire to replace the old country house to build a one-story spacious country house with a fireplace for warm family evenings... It was decided to build the house from aerated concrete blocks so that the future country handsome man would please the owner for decades! The customer voiced his wishes for finishing - and we, in turn, brought everything to life. Thanks to the detailed visualization of the project, each element of the exterior decoration is a member of a friendly ensemble! Bavarian masonry, as the final stage of exterior decoration, looks noble and thorough. Without a doubt, such a tandem - aerated concrete and brick can be safely called best solution in the field of stone housing construction - warm, affordable, beautiful, reliable. Modern technologies we have stepped forward so much that such unique configurations become available in a short time, because we built this project during the winter months. Most importantly, own necessary knowledge and constantly replenish their supply!



What was done

Project: the project of a European company was taken as a basis and was adapted to the site and the wishes of the Customer's family, a terrace and a patio were proposed, taking into account the cardinal directions on the Customer's site.
foundation: based on geology and the architect's calculations, the house was built on a pile-grid foundation.
ceilings: basement - reinforced concrete monolithic; interfloor - wooden on beams with a sound insulation device of 150 mm.
box: walls made of aerated concrete blocks, laying with masonry glue. Windows are made to order with one-sided lamination, installation on site.
roof: metal tile.
exterior finish: the walls are insulated with basalt facade insulation and plastered. Drawing on visualization added facade panels under the Tolento stone. The enclosing elements of the terrace, balcony made of wood, made on site, based on the TK-visualization, painted. Roof overhangs are hemmed with spotlights in the color of the roof.



Vladimir Murashkin, The owner of the house "brought to life according to his idea and sketch!" House options:

What was done

When Customers come to us with bright, modern ideas future home, we light up doubly! After all, to work on a new stylish project it is always interesting and a challenge, how to implement everything bold ideas From a constructive point of view, what materials should be used? Vladimir bought a plot with picturesque views of the Oka River! Such a view could not be ignored, so a dizzying terrace (51.1 m2) and a large balcony, focused on beauty, became an indispensable attribute of the future home! Vladimir wanted to relax in nature in wooden house, and it was necessary to build a house in a short time and ideal solution for such tasks has become frame technology construction! If we are different, then in everything! The house was made even more spectacular by the vertical finish with an imitation of durable larch timber, painted in natural shades with accentuated wood texture. Complement the modern look of the house - windows with lamination! It turned out to be an excellent country house, with zest and at the same time incredibly functional.

It all started with individual project, found by the Customer's family on a European site. It was with him that she came to our office for the first time. We have done preliminary calculations on the project, gave a tour of the existing construction site, shook hands and the work began to boil! The architect improved and adapted the project to the site and the Customer's family; the foreman "planted" the house on the site. Based on the fact of geological surveys, it was decided to put the house on bored piles. The frame has grown in a few weeks, then the roof, insulation, exterior finish! During the winter, a house grew on the site. The customer invited a third-party technical supervisor who monitored the process regardless of our multi-stage control. The color scheme for painting the imitation of timber was chosen by our manager and here we have a bright and cozy dream country house of the Pushkov family!