Even a person who does not have experience in hand-made can make a lampshade with his own hands. Any work is used suitable materials: fabric remnants, paper, thread, glass, plastic bottles, cups or spoons. The product can be given any shape, decorating it with beads, beads, feathers, dried flowers, hand-painted. The choice of style and style of the lampshade depends on the general idea of the interior. The finished product will transform a standard floor lamp, ceiling lamp, sconce or table lamp.
New life for plastic utensils
When thinking about how to make a lampshade, pay attention to simple and available materials available in every home. Try to make an elegant and unusual ceiling with your own hands. As a material, use ordinary plastic spoons. Such a product is ideal for the kitchen, depending on the color of the spoons, it can be pure white, cream, green, orange. It is easiest to make a frame for a lampshade with your own hands from a large plastic bottle with cut neck.
For work you will need:
- a large five-liter bottle;
- sharp knife;
- wire cutters;
- glue gun;
- cord with cartridge.
The number of spoons depends on the size of the structure. Carefully cut off the handles with wire cutters, only the main parts with a notch are needed for work. Cut off the bottom and neck of a plastic bottle with a sharp knife. Fasten the parts of the spoons with the convex side up. Start work from the bottom edge of the future lampshade, attaching the parts close to each other. Place the second row with an overlap, in the form of scales. The neater the spoons are attached, the more beautiful the finished product will turn out. When finished, thread the cord with the cartridge through the holes and screw in the light bulb. 
You can also make a ceiling lamp for a chandelier from plastic bottles. Cut out decorative leaves from them, and then assemble a spectacular composition. Unusual design looks especially nice when the light is on. The craft will decorate the nursery or hallway, it will look spectacular on the veranda or loggia. For work you will need:
- soldering iron with a tip for dry soldering (bronze nickel-plated);
- dark green plastic bottles yellow color;
- coarse thread;
- acrylic glue;
- scissors;
- thick wire;
- glue gun;
- chuck with cord.
From the walls of the bottles, cut out leaves with cloves. The size is arbitrary, it is better if the leaves are different. Heat up the soldering iron and gently trace the contours of the leaves with a stinger so that they melt slightly and curl up. Be careful not to damage the blanks.
Draw the veins with a gentle touch of the soldering tip. Make the central vein deeper, put a thread in it and lightly melt the edges. When the right amount of detail is done, soak the threads acrylic varnish using a pipette. Dry the blanks. Assemble them into an arbitrary design by gluing them to the frame with a gun. There are a lot of ideas on how to make a frame for a lampshade. The easiest way is to roll it out of thick wire and glue it to the ceiling with a gun. 
According to the described technology, you can make a lampshade for a table lamp with your own hands. The product will give a dim diffused light and will easily fit into a high-tech interior.
What can be created from threads
From durable thread, cord, twine or jute rope, you can make a magnificent lampshade suitable for an eco-style interior. It is suitable for ceiling lamp or floor lamp, decorate the living room, nursery, hallway or kitchen. Very smart similar products look open summer veranda.
For work you will need:
- about 100 m of strong, harsh thread or rope;
- inflatable silicone beach ball;
- PVA glue;
- a plastic cup;
- scissors;
- cartridge with a cord;
- glue gun;
- petrolatum.
Inflate a beach ball and smear Vaseline on the surface. Make a small tool for threading. IN plastic cup make 2 holes located one opposite the other. Set the glass on a saucer and pour PVA glue into it. Pull the thread through the resulting design, and then wrap the ball around it in random order. The denser the threads are wound, the less transparent the finished product will turn out. When the work is finished, set the workpiece to dry for 24 hours. 
Gently release the air from the ball and remove it from the resulting ball of thread. Vaseline prevents the threads from sticking to the surface, so this procedure is done without difficulty. Cut out two holes, one opposite the other. The top should be small, the bottom should be wider. Pass a cord with a cartridge through the holes, fix it in the upper part with glue so that the lampshade holds tighter. A hand should pass freely into the lower hole, this is necessary to replace the light bulb. 
The finished product can be decorated by gluing coffee beans, beads or dried leaves. Attach the decor with a few drops of hot glue from glue gun. There are a lot of ideas on how to make a ceiling lamp for a chandelier with your own hands, but for starters, you should try the simplest basic options. It remains only to hang the structure from the ceiling and screw a suitable light bulb into the cartridge.
Classics of the genre: comfort with tassels
A special comfort in the house or in the country will create a lampshade made of fabric: matting, canvas, chintz or linen. 
Sewing it is easy. A strip of the required width is cut out of suitable matter and sewn onto machines from both edges. Then the matter is collected in a ring, a cord is pulled into the upper drawstring and pulled together so that the lampshade forms dense assemblies. The resulting product is put on a frame that will retain a beautiful rounded shape. 
Options for how to make a frame for a lampshade can be searched in various Internet sources. The easiest way is to use a thick wire rolled into a ring. You will need two or three of these blanks different sizes. The smallest ring is attached to the upper part, the middle one is glued in the center, bottom ring should be the largest. The finished product at the bottom can be decorated with a fringe. It is also appropriate to decorate a fabric lampshade with bows, embroidery, beads or sequins. The choice of decor depends on the style of the room. 
A lampshade for a floor lamp, made independently, will be inexpensive, and its appearance might be quite worthy. Such a product will be an excellent gift, you can involve children in the manufacture, they will really like this leisure option. Even kids can create a do-it-yourself ceiling lamp for a floor lamp; this work will be a reason for pride and a real decoration for a children's room.
Photo gallery
We bring to your attention a successful selection of 36 do-it-yourself lampshade photo ideas.
Lamps are not just a source of artificial lighting in the interior, but also an important element of decor, without which the composition looks incomplete. You can create bright accents by making a ceiling for a chandelier with your own hands, because it is not at all necessary to spend huge amounts of money on the purchase of designer models. About the nuances of work - read our article!
Where to begin?
When creating a do-it-yourself ceiling lamp, keep in mind that using an ordinary incandescent lamp is not the best idea. It is better to focus on energy-saving light bulbs, which do not heat up so much and, accordingly, do not heat up nearby parts, thereby ensuring safety. In addition, they are quite economical, which allows you not to spend money on electricity, and are also durable.
When choosing a material for a ceiling lamp, focus on both aesthetic properties and specifications. First, it must be environmentally friendly, preferably natural bases that will not spread unsafe substances with minimal heat.
Secondly, the ceiling should not collect a lot of dust: some surfaces, like fabric, are more prone to this than others. Choose an option that is easy to clean, easy to wipe with a damp cloth. This does not apply to paper, but due to the cheapness and simplicity of the material, such a chandelier can always be replaced if necessary.
Thirdly, the chandelier should illuminate the room well without dimming it. However, for some interiors, subdued lights are more suitable: in the nursery, bedroom or living room for an intimate atmosphere. In such cases, you can show your imagination by making a lampshade that creates light patterns in the room. You, as the author, can implement any of your decisions - and this is probably the main advantage of homemade ceiling lamps.
We select a ceiling lamp for the style of the interior
The chandelier can become bright accent in the interior or its inconspicuous, but important addition. With any choice, the ceiling should harmoniously match the style of the room.
Unfortunately, not every product can be created with your own hands. For example, the classics are characterized by elegant crystal, glass or hardware that you can't make yourself. But there are other options as well.
Minimalism
The laconic and laconic composition of minimalism can easily be broken due to one extra detail, which will be especially noticeable in such an interior. Regardless of the type of room, simple geometric shapes, the absence of hanging elements, as well as the monotonous color scheme, which is included in the overall palette of the space, will look appropriate here.
Metal frame structures that dim the light a little, or paper shades without decorative details, work well.
Loft
That's where you can really roam, so it's in the loft interior, in which they will look organically homemade products from unusual materials. It is not scary if the appearance of the chandeliers betrays their non-manufacturing origin, because many details of this style put forward their imperfection as the main advantage.
For ceiling lamps, it is permissible to use even familiar objects: transparent cans, metal appliances, thread or wire frames. If the ceiling height allows, then great option will be long hanging chandelier with a minimalist cap.
Scandinavian style
Despite the northern origin, this direction in the interior looks very cozy and modern. Minimalistic in nature Scandinavian style prefers natural materials, as well as light, mostly white, colors.
There are many options for the design of the chandelier - the style is not very limited in forms. But not everything can be created independently. Suitable spherical, air models thread or paper.
Provence
Coming to us from distant French villages, Provence prefers a simple, cozy aesthetic. natural materials, floral patterns, as well as light shades. Something like this should be the ceiling for the chandelier.
Items made of fabric or rounded lace look appropriate. With a small level of skill, you can ennoble a glass jar with decoupage, thereby saving money - after all, despite its simplicity, authentic Provence involves significant costs during arrangement.
Paper shades
Despite the fact that paper is not considered the most reliable basis for lampshades, the ease of working with it and the noticeable cheapness made this material very attractive among needleworkers. In addition, with its help you can update the interior at least every month, creating new crafts.
Origami plafonds
Who has not been fond of origami as a child, designing little animals or complex modular paper products? Now you can apply your skills for more practical purposes. However, even people who first encountered this activity can also easily master it and make origami ceiling lamps for a chandelier with their own hands.
These are laconic designs of different geometric shapes that fit perfectly into modern interior. It is not recommended to use very strong paper, as it does not transmit light well.
Figured products
However, lovers of a more diverse decor can create ceiling lamps of a wide variety of shapes from paper. For example, surround the lamp with paper houses, butterflies or envelopes.
The appearance of such a ceiling also depends on the surface - plain, patterned, newspaper, and so on. Combining these materials, you can achieve completely different effects.
Chinese lanterns
If you have paper lanterns at home, do not rush to use them as an independent ceiling, because this is an excellent basis for other experiments.
It can be pasted over with anything, but to avoid homemade look- we suggest decorating the ball with small paper scales or long "feathers" that will gracefully hang down to the bottom.
Plafonds from threads
Various threads and ropes make an excellent base for a lampshade, which is suitable for creating an intimate atmosphere due to the dimming effect.
graceful cocoon
A round ceiling made of randomly wound threads looks very simple and at the same time stylish. To keep such material desired shape, it is fixed with glue on a balloon, which is delicately removed after work is completed.
Although the field for creativity here is small, but you can always experiment with colors, weaving in several shades.
Knitted shade
Such a solution from threads looks less chaotic. The main conditions for its manufacture are the ability to knit or the presence of a grandmother who will kindly knit a napkin for you. The finished product must be placed on any base - metal carcass, transparent container, Chinese ball. Similarly with the first option, you can fix the lampshade on the balloon with glue.
Plafonds from bottles
Stylish indoor chandeliers different types You can even create from bottles. This includes both glass and plastic containers.
Glass bottles or jars
The principle of working with such a base is simple: choose the most beautiful and hide the lamp in it. Elongated bottles or small jars can be used. It is necessary to make sure that the glass transmits the amount of light necessary for the room, and in case of a lack, several sources can be used.
If the chandelier plays more of a decorative function, the bottle can be covered acrylic paint or painting.
Plastic shades
Plastic bottles should not be used untouched. But to make them cheap parts for homemade ceiling is quite real.
Luxurious (as far as this word is generally applicable to plastic) look chandeliers from the bottom ordinary bottles which are shaped like a flower. They are fastened together with wire for better fixation, creating a variety of compositions.
Another option is a 10-liter eggplant, glued with plastic spoons, which are lined up in several rows, like scales. The design will let in a subdued but uniform light, which will additionally decorate the product.
Plafonds made of metal elements
Enough unusual solutions for chandeliers also offer metal products. Fortunately, you don’t need to make them yourself, so you won’t need any special metalworking skills. But a spectacular appearance is provided in any case.
Kitchen appliances
Do not rush to throw away old spoons and forks - they will come in handy for creating original design. By placing a dozen fixtures around the lamp, you get a great ceiling for kitchen chandelier which fits the theme perfectly.
The same effect can be achieved using, for example, a grater. In general, you can experiment with any appliances, especially if your interior is decorated in a loft style. Just make sure the metal parts don't get too hot.
dome of gears
If you want to add a bit of steampunk to your life, make a chandelier shade out of gears. They can be obtained by dismantling an old bicycle, or bought at a flea market. But the result is definitely worth the effort!
We examined the features of making do-it-yourself ceiling lamps for chandeliers and the most popular solutions from various materials. But interesting options, of course, much more - proof of which is our selection of photographs. Enjoy watching!
Decorating the lampshade will help create a unique atmosphere of comfort in the house. In addition, it will help to give old things new life. No need to throw away old lamps and fixtures, but it is worth showing a little imagination to create a completely new one. designer item. The decor of the lamp can be made from improvised means, creating a lamp that will harmoniously complement the interior of the room.
Decor materials
In order for a hand-made lamp to look original, you can use a variety of accessories to decorate it. different materials and fixtures. Basic materials for work:
- glue (PVA, silicate or glue gun);
- twine, wire, twine;
- beads, rhinestones, beads;
- scissors;
- pliers;
- thick cardboard, sheets of white paper;
- lampshade frame;
- bulb holder and wire.
This is not a complete list of materials that are used to create a lampshade. In the work, you can use any improvised means and materials.
The simplest version of the base for the lampshade is the frame from the old lamp. You can use metal frames from old lamps, which are later decorated at the choice of the master. Can also be used as a base glass jars, plastic container. The frame of the product can be made of wicker or wood panels.
The light bulb holder and wire can be purchased on the market or use the remnants of an old lamp.
From papier-mâché
An interesting solution for interior design is a papier-mâché lampshade. For decoration you will need white paper, old newspapers (can be replaced with thin sheets paper), PVA glue, balloon, water. Before starting work, the ball is inflated to the size that the lamp will then be. The newspaper needs to be cut into long strips, which are briefly left in glue or paste. Wet the surface of the ball with water and lay out the first layer of newspaper. One of the parts of the ball is not sealed, since light will come from it in the future.
An unusual solution: if you do not cover the bottom of the ball with a newspaper layer, the light will be directed towards the floor. You can also leave the side of the ball free, in which case the light will come out to the side.
For creating unusual lamp from papier-mâché, you will need to apply 5-6 newspaper layers. Be sure to ensure that before applying the next layer, the previous one is completely dry. After completing the layout with a newspaper, the lampshade can be pasted over with white paper, apply liquid wallpaper. After decorating the lamp, the ball needs to burst, paste over the lampshade with paper inside. Make a hole for the chamber on top of the product.
From cardboard and paper
Another decor option is a paper lamp. This requires thin cardboard in white or other colors. The length of the cardboard sheet depends on the required diameter of the finished product. The selected contour is applied to the cardboard (butterflies, hearts, stars, etc.). With the help of a clerical knife, the selected drawings are cut out of the canvas. The cardboard is glued along the edges and attached to the frame of the future lamp. Along the edge of the lampshade, you can attach ribbons or a fishing line decorated with beads, on which you can hang symbols cut out of cardboard. Such a product looks very original on the ceiling of a nursery or bedroom.
Colored beads can be strung on ribbons, which will alternate with paper figures.
After turning on a lamp with such a frame, funny figures will appear on the walls of the room.
Using fabric to decorate a lamp
Fabric lampshades are easy to make and hold up well to cleaning. as the most simple option lampshade, you can take a piece of fabric that looks harmonious with the interior of the room, and sew its edge. A cord is threaded in the upper part and that's it - the lampshade is ready. Such a product is attached to a metal frame and is also easily removed.
More difficult option fabric lampshade can be decorated with ruffles, weave ribbons. Lampshades trimmed with fabric ribbons or embroidered with beads and sequins look quite original.
For the decor of the living room, you can make a lampshade, decorated with fringed ribbons. Ready-made ribbons are sold in sewing stores. A hot glue gun is used to attach the fringe to the frame. The adhesive substance is applied in a thin layer to the frame of the lamp, to which the braid is subsequently attached.
If there is a need to decorate the finished lampshade to make it match the interior, various figures can be cut out of the fabric, which are attached to the lampshade with a glue gun.
From improvised items
In any home you can find a lot of items that can be used to decorate a lamp. And if you look in the garage, you can create a whole studio of designer chandeliers. The most important thing is to show imagination and approach the choice of materials for decor outside the box.
In order to fire safety you need to use items that are resistant to impact high temperatures or screw in low-power light bulbs before starting work, the surface of the object must be cleaned of dust and dirt, degreased.
Choosing the style of the lampshade, it is worth considering the interior of the room, its purpose. For example, a lampshade made of plastic spoons would look strange in a living room that is decorated in a frilly glamorous style. At the same time, a lampshade decorated with rhinestones and stones will be completely out of place in the kitchen or in the summer gazebo.
From plastic spoons
This lamp is ideal for decorating the kitchen. It is very simple to make, while the materials for the lamp cost a penny. So, for work you will need the following materials:
- A set of plastic spoons. A total of 50-100 pieces of fixtures will be required, depending on the desired size of the lamp.
- Gun glue.
- A set of acrylic paints and brushes.
- Lampshade frame. A ready-made metal frame from an old desktop floor lamp is suitable for work.
- Scissors.
First, you need to cut off the holder from all the spoons. For each product, you must leave 0.5 cm of the boat for fastening. Further, parts of the spoon are randomly attached to the frame. They can overlap each other, imitating fish scales, or scatter, resembling rose petals. Spoon legs can also be used for decoration. After covering the entire surface of the frame, the surface of the spoon is covered with acrylic paint - plain or multi-colored. Using this decor technique, you can create a lamp in the form of a pineapple, a flower, a goldfish and others. A lampshade made of plastic spoons is suitable not only for a ceiling lamp, but also for decorating a bedside lamp in a nursery.
From plastic or glassware
Water bottles often accumulate on the farm, which can be used to decorate lamps. Before starting work, the bottle must be thoroughly washed and dried. Further actions are the freedom of the master's imagination.
For example, by cutting off the neck of a bottle, you can create an excellent holder for a light bulb holder. Several of these accessories, which are glued together, form an unusual chandelier. Bottles can be used from multi-colored plastic or coated with a transparent colored varnish. So, multi-colored rays of light will sparkle in the room.
To create a lampshade, you can also use glass pickle jars. Hanging lamps from cans at different levels will become interesting design decision in the design of the kitchen. Also, when arranging the kitchen, you can use saucers, cups, fragments from broken dishes to decorate the lampshade.
From twine
Such lamps can often be found as lanterns on the streets or on terraces. Making such a lamp at home is very simple - twine and glue are used to create it.
Before starting work, as in the case of a papier-mâché lampshade, you need to inflate a balloon right size. It is he who will serve as a form for the future product. The string must be soaked in a paste and wound around the ball in random order. The free edges of the twine are tied, while the knot must be placed at the top of the ball, where the chamber will then be located. The product will dry for about 2-3 days. Then the ball needs to burst and you can attach the chamber and the light bulb. The finished product can be decorated with large beads, dried flowers. To decorate the gazebo, you can use several of these lampshades of different sizes.
Thus, there are many options for creating an original lampshade. In work, you can use not only special equipment, but also improvised items. The manufacture and decoration of the lampshade will allow not only to decorate the house, but also to have a great time.
Good lighting can radically transform any room, just like poor quality lighting can make a room uncomfortable and gloomy. For example, in restaurants and cafes, soft warm lighting always prevails, conducive to relaxation and rest, but cold and harsh light in hospitals, on the contrary, strains the eyesight. IN winter time we especially miss sunlight, but I want the house to be light and comfortable. Beautiful floor lamps and lamps are able to create a cozy home atmosphere. But if you did not find a suitable model in the store, then you can make a lampshade for a table lamp with your own hands. How to do this - we will learn more from this article.
Where to start creating a lampshade?
First, we select a lamp or several lamps at once that you decide to transform. Devices with LED and energy-saving lamps are excellent for this.
Important! Please note that ordinary light bulbs can burn through the fabric.
First of all, we remove the frame, on which a brand new lampshade will be sewn. If not, then you can buy a new one at hardware store or specialized salon.
In principle, the frame can be made with your own hands, for this you need to purchase pliers and thick wire. At the expense of the form - here you can fantasize as much as you wish. But in order to have fewer problems, it is better to make a cone-shaped or cylindrical frame.
From what materials can a new lampshade be made?
Before considering how to make a lampshade for a table lamp with your own hands, you need to familiarize yourself with possible options choice of improvised materials. Even the most old lamp can be stylish and attractive.
You can use a variety of materials for this. For example, beautiful fabrics, old film, beads, ribbons, fabric and knitted flowers, plastic, mesh, various paper and even wallpaper.
And now let's take a closer look at the most popular options for transforming old lamps and creating real masterpieces.
DIY paper lampshade
Paper lampshades are made not only by craftsmen, but are also sold in the most ordinary stores where home furniture is presented. As a rule, they are not cheap, so it is more rational to make them yourself.
Important! The shape of such a lampshade can be any, and due to this they can be used in a variety of modern interiors.
For these purposes, you need to buy only the highest quality and densest paper so that the product lasts as long as possible.
Important! It must be remembered that the thickness of the paper will determine how much the lampshade will transmit light.
There are several varieties of paper that are ideal for the manufacture of such products:
- Rice paper lampshade. Such material is perfectly glued to old lamps, which gives them a new shine. Often finished goods decorate by means of special stamps, in particular in cases of using a monochromatic base. White lampshades are in perfect harmony with muted shades and natural materials.
- Wallpaper lampshades. This idea is especially attractive due to its minimal financial costs. You can even use the remnants of wallpaper, lying around after the repair.
Important! The most popular option is to make a cap for a table lamp in the form of an accordion:
- First, a piece of wallpaper is taken about one and a half meters long and no more than 30 centimeters wide.
- Then it is folded into an accordion.
- After that, the resulting lampshade is perforated and the laces are threaded into it.
- Then the structure is glued together.
Mesh lampshade for home
And now let's look at how to make a lampshade for a floor lamp with your own hands from the most ordinary metal mesh, which you can even find in your garden or in the country:
- You can form this material into any shape, because you just need to connect the ends and create at your discretion. More often products are made in the form of an ellipse or a ball. To get this shape, you need to use a ready-made frame made of thick cardboard or strong wire.
- A mesh lampshade is attached to the light bulb cable using the same wire.
Important! The finished lampshade can be decorated with weaving from colored laces or artificial flowers.
Lace lamp shade
With the help of such lampshades, you can make the interior of your home more elegant and light. The lace itself, depending on the variety, makes the light brighter or more diffuse.
Important! Such products look great in children's rooms, bedrooms and living rooms.
Here are a few useful tips to help you along the way:
- Naturally, the main material for making such a lampshade for a table lamp with your own hands will be lace. But if for someone they seem too expensive, then you can replace them with lace napkins or pieces of old curtains and tulle.
- The material must be cut correctly in order to give it the shape of a circle, strip or square.
- The hardest thing to glue with a special glue individual elements, so you need to do this as carefully and carefully as possible.
Important! Lace can be glued even to the most ordinary hot air balloon or a prepared frame covered with paper or cloth.
Stylish beaded lampshade
Now we will learn how to make a frame for a lampshade with our own hands, which will then be covered with beads. In this case, you can make the base from the same wire or old frame. But the product itself will be made of beads, not paper or fabric, as in previous cases.
Important! Such a lampshade will perfectly transmit light, and the result itself is truly admirable.
To work, you will need a frame, fishing line and, of course, beads:
- The end of the fishing line should be firmly attached to the base, and you can string beads on it, making knots between them so that they do not move.
- Then the second end of the fishing line is attached to the frame.
Important! The manufacturing process of such a lampshade is quite laborious, but all the work is compensated by a unique decorative effect.
Original fabric lampshade
Many needlewomen are interested in how to sew a lampshade for a table lamp from various fabrics left over after making other interior items or tailoring.
Important! In principle, light, dense, and rigid fabric is suitable for this. Some craftsmen even manage to make wool lampshades - it all depends on the interior of the apartment and their own flight of fancy.
If you already have a wire frame, it's best to use an opaque material to help hide it, such as dark-colored taffeta, cotton, or silk.
The manufacturing process of a fabric lampshade consists of several stages:
- We make a template to correctly cut the right amount of material:
- If the frame has the shape of a cylinder, then you can measure the circumference and draw one line on the fabric, and then measure the height and mark it with a second line. After that, you only need to finish the two remaining sides and cut out the finished template.
- If the frame is cone-shaped, then you need to lay out the paper, and use a pencil to mark dotted lines on the sheet as it passes over the sheet. The frame should rotate completely. Then we connect the lines and cut out the pattern.
- We apply the template to the already finished frame in order to check whether it fits clearly in size. In case of discrepancy between its dimensions, it is necessary to take measurements again and make a new template.
- Having received the correct template by all standards, we attach it to the fabric:
- If you have chosen a material with a print, then you need to position the template in such a way that all elements of the pattern look in one direction.
- It must be applied to wrong side material, and then attach with pins.
- Then we circle the template and be sure to make small allowances.
- Carefully remove the pins and wrap the allowances inward.
- We fix the fold line with pins.
- We sew the resulting parts on a sewing machine on three sides, one must remain unprocessed so that it can be done, then form a seam directly on the frame.
- With the help of an iron, we thoroughly smooth the fabric blank.
- We cover work surface a piece of old tablecloth or paper, lay out the fabric on it. Apply glue to it and wait a few minutes.
- We glue the fabric to our frame and hide the raw cut. The seam must be made as accurate as possible.
- Leave the finished lampshade for a while to dry completely. In a day, you can put it on your favorite table lamp and enjoy the result.
Lighting can both transform and make any room uncomfortable. Suffice it to recall the hospital cold corridors, and, for example, a cafe, where there is always soft warm light.
Especially in winter, people do not have enough sun, so it is very important that there is always light at home. A special cozy atmosphere can be created with the help of various lamps or floor lamps. However, it is not always possible to choose a lamp suitable for the interior of the room. But do not be upset, because for any lamp you can do.
Do-it-yourself frame and base for a lampshade
First you need to select a lamp or several lamps for which you want to make fabric lampshades. It is better to use lamps with energy-saving or LED lamps. Ordinary light bulbs can simply burn the fabric, so it's best not to risk it.
Before starting work, you need to remove the frame for which the lampshade will be created. If the lamp does not have a frame, then it can be purchased, for example, in a special store or building department.
Also, a frame for any lamp, whether it be a floor lamp, a table lamp or a chandelier, can be made independently. This will require thick wire and pliers.
The shape of the base can be any. It will be easier to make a lampshade for a cylindrical or cone-shaped frame.
How to choose a fabric for a lampshade
First of all, you need to choose the right fabric for the lampshade. You can use light, rigid or dense material. If desired, you can make a lampshade even from wool, it all depends on the idea of the creator and the interior of the room.
If the frame consists of ordinary wire, it is better to use an opaque material to close it. Dark silk, cotton and taffeta will do.
It is also worth remembering that the color of the fabric can give both cold light, and warm. In the first case, you can use blue or green fabric, and in the second - yellow, orange or red.
Necessary materials for the manufacture of a lampshade
Fabric lampshades can be done different ways. If the new lampshade is to be glued on top of a regular plain lampshade, then no preparatory work not required.
But if there is only a wire frame, then it is better to paint it first, and then wrap it with light or dark cotton tape.
To make the lampshade look neat, you need to sew it on a typewriter.
In addition, you will need:
- iron;
- simple pencil;
- ruler;
- textile;
- pins;
- threads that match the color of the material;
- kraft paper (or any thick paper, as well as whatman paper);
- glue (you can take a special one for fabric or universal).
When all necessary materials and tools at hand, you can start sewing DIY fabric lampshade.
Master class on making a lampshade with your own hands
First step
First you need to make a template to cut required amount fabrics.
There are two ways: if the framework cylindrical shape, then you can measure the circumference and draw one line on the fabric, and then measure the height and draw a second line. After that, it remains only to draw two more sides of the rectangle and cut out the template.
If the frame is cone-shaped, then you can lay out the paper, take a pencil and gradually roll the frame along the sheet, mark the lines of passage of its sides with a dotted line.
The main thing is that the frame is completely scrolled, for this you can mark the reference point on it with a piece of thread, or a pin. After that, you can connect the lines and cut out the template.
Second step
In order not to cut off more, or even worse, less fabric, you need to attach a template to the frame of the lamp - it must fit exactly in size. If the template is larger, you need to cut off the excess paper, if it is smaller, you will have to take measurements again and make a new template.
Third step
When the size of the template matches the size of the base for the lampshade, you can begin to attach it to the fabric. If the material is patterned, you need to position the template so that the drawn elements “look” in the right direction. It is necessary to calculate everything so that, for example, not to cut off the head of a flying bird. Otherwise, the lamp will look ugly.
The template must be applied to the wrong side of the fabric, and then it must be secured with pins. After that, you can carefully circle the template along the contour. If the fabric is dark in color, you can use not a simple pencil, but special fabric crayons or a bar of soap.
After that, you need to draw allowances. To do this, you need to draw lines at a distance of one and a half to two centimeters from the borders of the template.
Fourth step
Without removing the template from the fabric, you need to carefully remove the pins one at a time and wrap the allowances inside. It is necessary to fix the fold lines with pins.
Now you need to remove the template and fill sewing machine. The threads must be chosen so that they are almost invisible on the fabric.
Fifth step
Now you need to stitch the resulting part on a typewriter. This needs to be done only on three sides - one of the sides must be left unfinished, in order to later form a seam on the frame itself.
You need to stitch at a distance of five to seven millimeters from the edge. If you wish, you can process slices. But in any case, they will have to be hidden when the fabric is glued to the frame.
sixth step
After that, you need to turn on the iron and iron the fabric blank well. If wrinkled parts remain, the fabric will not stick well to the base, and the lampshade will look ugly.
seventh step
The next part of the work must be carried out in a room that is well ventilated. First you need to cover the work surface waste paper or an old tablecloth and lay out the fabric. Then you need to apply glue to it and hold for some time, which is indicated in the instructions for the glue.
eighth step
Now you can glue the fabric to the frame. It is necessary to hide the raw sections, and make the seam in such a way that the lampshade is closed with a stitched edge.
If the lampshade is attached to a wire base wrapped with cotton ribbons, it is not necessary to apply glue to the entire surface of the workpiece, it is enough only to the part that comes into contact with the details of the frame. In this case, you need to stretch the fabric well.
Ninth step
The finished lampshade must be left for a while so that it is completely dry. After about a day, you can put the lampshade on your favorite lamp and enjoy a beautiful item that will definitely become an adornment of any interior.
Fabric lampshade decoration
Table lamp with lampshade looks much nicer than just an ordinary bare lamp. But if a solid color is chosen for the lampshade, then you can decorate it in an original way. Here are some ideas on how you can interesting decoration fabric lampshade.
Lampshade in Provencal style
In order to decorate a plain lampshade, you will need a piece of fabric and a fringe. Usually used for green, turquoise and pastel shades of colors, checkered colors or floral patterns are also suitable.
First you need to choose a suitable fabric for a plain lampshade and cut out two strips from it - one to decorate the top of the lampshade. This strip of fabric should be long enough to completely wrap around the circle and make a bow. The second strip should have the circumference of the bottom of the lampshade, and a fringe must be sewn to it. You can do this on a sewing machine.
All free edges of the fabric must be processed so that it does not crumble. After that, using glue or thread with a needle, you need to attach the fringe tape to the base of the lampshade so that the fringe hangs down.
Then you need to decorate the top of the lampshade. To do this, you need to glue or also sew the ribbon along the circumference, and tie the free edges with a bow.
For lampshade in Provencal style you can also use lace. This element is good because it can be simply glued to the fabric.
You can make lace flowers, stripes, or completely glue the fabric lampshade with lace napkins.
Lampshade with fabric flowers
Another one unusual idea, which will allow table lamp with lampshade become like a flower bed - decoration with fabric flowers.
Fabric of delicate shades is perfect for flowers, you can use, for example, organza or chiffon, or you can simply take, for example, an old sweater, cut strips and twist roses out of them.
A lampshade can be decorated with just a few flowers, but if you have time and patience, you can make a whole bunch of flowers to completely cover the lampshade.
Do-it-yourself lampshade from scraps
If there are many pieces of different fabrics at home, you can make a lampshade from multi-colored shreds.
In order to make such a lampshade, it is necessary to use the technique of sewing pieces to the fabric base. The easiest way is to cut a piece of fabric to the size of the frame and divide it into several wedges.
Then you need to sew patches to each wedge the way you like - you can sew strips of fabric diagonally, or make small squares. So that the process does not drag out, it is better to use a sewing machine.
After that, all the wedges with patches will need to be sewn together and glued to the base of the lampshade.
Such a lamp can perfectly fit into the country style!
Lampshade made of unusual materials
When the lampshade is made independently, you can give free rein to your imagination and experiment. To do original thing, you must first find unusual material.
It is very interesting, for example, in the kitchen, a lampshade made of burlap can look. This fabric transmits light well. Such a lampshade can be decorated with any wooden details, for example, clothespins or wooden beads and buttons.
You can also use grandmother's old lace napkins to decorate. Also on such a lampshade you can write something with white or black paint, as is usually written on bags.
For a teenager's room, you can sew a lampshade in. This will require denim. And you don’t have to buy it, you can just cut old jeans - every person will surely have such a thing.
Such a lampshade can be decorated, for example, with a denim pocket where you can insert artificial flower or a piece of checkered handkerchief. Also for such a lampshade, you can use the application. For this, pieces of leather are suitable.
For example, for a lamp that will stand in a girl's room or bedroom, you can sew a delicate mesh lampshade. This fabric can be found in any sewing store.
It will be interesting to look at the lampshade, which is made of several layers of mesh - it will resemble a ballerina's tutu or a fluffy skirt.
