Interesting, Tips, Decor, Workshop, Furniture, Interior Click "Like" to read Make-Self.net in The garage is not only a shelter for storing your car, but also a multi-functional center for storing a variety of things: gardening equipment, sports items, tools and other little things. Organization of space in the garage...
27 Lifehacks for organizing space in your garage
Interesting, Tips, Decor, Workshop, Furniture, Interior
A garage is not only a haven for storing your car, but also a multi-functional storage center for many things: gardening equipment, sports items, tools and other small items. Organizing your garage space can be a lengthy process, but it will help bring order to the chaos for good.
INTERESTING:
INTERESTING: 70 connection methods wooden parts
INTERESTING: What can be made from plywood. 24 Master classes
INTERESTING: Original and simple furniture designs TOP 20
Tired of chaos and hours spent searching for a Phillips screwdriver? Take a look at these 27 life hacks, thanks to which you can easily and quickly restore order. With a few things from hardware store or recycled materials, you can maximize the space of your room.
Your face when you see this chaos in the garage
Use magnetic holder for knives to place small items, such as drills, keys, cue balls and other things. And no need to dig through the drawer.
With just a few pieces of wood, boxes will no longer take up valuable space in your garage. This also allows for better access to each drawer.
Why didn't I think of this before? Use fasteners for paper towels to conveniently place garbage bags.
Use cans for storing smaller items.
Make brackets out of wood to hang lawn chairs on the wall. And they will no longer get in the way.
Jars with a lid screwed to the bottom of the shelf will help you conveniently store screws, screws, nuts and other small items.
Use a rubber cord to store sports balls.
Ribbon is that thing that is always difficult to find, it is never in place. If you have the materials and basic woodworking skills, you can make this handy container that can be used both in the garage and in the workshop.
MORE DETAILS
The plastic grid is great for storing pipes, baseboards, profiles and other long materials.
No matter the size of the garage, there never seems to be enough space. Use the space below your ceiling and create hanging shelving to store items you rarely use.
SourceIt's always nice when you know where the tools are. This project will help you place all your screwdrivers in one place.
MORE DETAILS
Use plywood panels with drilled holes to store tools. It is very comfortable.
Use pipes PVC miscellaneous diameter to organize tools in your workshop or garage.
A convenient option for storing brushes in the garage.
I think everyone who has a car has encountered the problem of storing it. We have a way out. Install two latches on the wall and you will no longer have problems.
By making similar rails from plywood and boards, you can free up a lot of space in your garage.
MORE DETAILS
SourceOrganize separate storage areas in your garage. Separately for garden, tools, spare parts and more.
Thanks to this design, you can conveniently place garden tools.
MORE DETAILS
SourceMetal pots are ideal for storage detergents. You can also use them on shelves as pull-out containers.
With this design, you can easily free up space in the garage and place a ladder under the ceiling.
MORE DETAILS
Hoses and wires are the most thankless things in the garage that are difficult to store. A similar design from PVC pipes will help deal with this problem.
MORE DETAILS
On such a rack you can place a large number of tools. It can be easily modified to suit any type of instrument.
When the season ends, where do you store your fishing rods? You can buy a special rack or make your own from an iron lattice.
Rack - book
Using sheets of plywood or perforated board and sheds, you can make a convenient structure with quick access to tools.
Use perforated pipes for easy placement of tools. This is the simplest and effective method organize working space.
Make a folding workbench that will save a lot of space in your garage or workshop.
MORE DETAILS
SourceUsing a magnetic knife holder and plastic containers, you can make this convenient design.
LATEST ARTICLES
POPULAR ARTICLES
What can be made from leftover leather? 30 Ideas
30 Incredible Cat Houses You Can Make Yourself
30+ Ways to Use Leftover Paint Wisely
30 Elements that can transform a garden into a paradise
25 Excellent coffee tables that you can do yourself
10+ Home Offices That Inspire Productive Work
25 Incredible Creations Made from Wood and Epoxy Resin
24 Incomparable plywood furniture options
70 Simple Ways to Join Wooden Parts
12 Easy Ways to Create Texture on Wood
92 Useful tricks for home craftsmen
99 Amazing Ways to Refurbish an Old Chest of Drawers
7 Examples - how to make a leather wallet
40 Unusual products made of wood
20+ Toys for children from cardboard boxes
45 Ways to Update Your Closet with Wallpaper
20 Original and simple furniture designs
26 Gifts self made for the stronger sex
25 ways to make a cool interior pillow
25+ Amazing Photo Frames You Can Make Yourself
50 Extraordinary wooden lamps
60 Wonderful Examples wall clock that you want to do
40 Simple Sofas You Can Make Yourself
30 Cool Handmade Wooden Gifts
blog comments powered by Disqus
Practical storage systems for the garage or workshop.
For many people, the garage is not only a place to store a car, but also a real automotive, metalworking and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it’s so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in “men’s Eden.” This review contains simple and yet effective ideas that will help you create almost ideal storage systems in your garage.
1. Magnetic tape
Magnetic tape for storing small metal parts.
Magnetic tape pasted on the wall in the garage can be used to drill storage, scissors, bolts, nuts and other small metal parts. This magnetic holder is very convenient to use and will help prevent the loss of small but important spare parts.
2. Plastic containers
Rack made of plastic containers.
From large plastic containers and pieces of wood, you can build a large rack for storing tools, wires, spare parts and any other things. Organizing such a rack will allow you to restore order and significantly save space in your workshop or garage.
3. Rails
Rails for garbage bags and paper towels.
On one of the free walls of the garage you can place several small roof rails, on which you can conveniently place rolls of garbage bags, paper towels, sandpaper, tape, skeins of rope and much more.
4. Furniture brackets
Brackets for storing furniture.
Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.
5. Jars
Storage of nails, bolts, screws and other small items.
Bolts, nuts, nails, self-tapping screws, screws and other small things do not take up much space, but storing them mixed is extremely inconvenient. Jars with lids screwed to the bottom of a wall cabinet or under the desktop will help you put these things in order.
6. Ceiling grille
Grid for storing pipes and baseboards.
A plastic grid screwed into the corner of the garage under the ceiling is ideal for storing leftovers. water pipes, skirting boards, profiles and other long things. Such a storage system will help significantly save space in the garage and prevent possible breakdowns fragile building materials.
7. Organizer for screwdrivers
Wooden organizer for screwdrivers.
A small practical organizer for screwdrivers that any man can make by simply drilling the required number of small holes in a block of wood. This product can be hung on one of the walls of the garage or workshop to store all the screwdrivers in one place.
8. Vertical storage systems
Vertical panels for storing things.
Several perforated panels made of metal or plywood under a table or in a cabinet will allow you to get an ergonomic and convenient place for vertical storage small hand tools.
9. Plastic pipes
Storage systems made of PVC pipes.
Leftover PVC pipes of different diameters can be used to create the most different systems storage For example, pieces of wide pipe screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of medium-diameter PVC pipes you can make cells for storing various sprays, polyurethane foam, tubes of paint and other containers.
10. Tassels
Hanging storage for brushes.
It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.
11. Rack for garden tools
Wooden rack for garden tools.
To garden tools did not take up a good third of the garage space, store it on a special rack screwed to one of the walls. You can make such a rack yourself from blocks of wood, a wooden pallet or pieces plastic pipes.
12. Multifunctional rack
Pallet rack with shelves.
A wooden pallet, complemented by shelves made from pieces of wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.
13. Rod holder
A simple wire lattice can be used to create a convenient fishing rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot during the autumn-winter season.
14. Pegboard
Tool organizer made of perforated panel.
The perforated galvanized metal panel can be used to create a multi-functional wall organizer for all sorts of things. Using hooks and bolts on such a panel you can secure small hand tools, containers and containers.
Folding wooden workbench.
A folding wooden workbench that can be made from wood is a great solution for a small garage or workshop. If necessary, such a workplace can be folded and attached to the wall, freeing up space for a car or other things.
16. Wheel bracket
Bracket for wheels in the garage.
A purchased or homemade bracket will allow you to securely fix a set of wheels under the ceiling or on one of the walls.
Video bonus:
17. Wooden holders
Organizers made of wood.
People who have at least minimal skills in working with a jigsaw can easily make a lot of convenient organizers and holders for a variety of things. A large number of such storage systems will allow you to put things in order in your workshop or garage and have a clear idea of where this or that item is located.
Also read:
Love has no days off
The main thing is not to be dead. Because death occurs much earlier than the heart stops. Death occurs when spiritual life stops. Death comes then...
Orsini eggs! Very tasty and not hackneyed, just an egg pie
If you have long been bored with the traditional omelet or scrambled eggs for breakfast, then it’s time to please yourself and your loved ones with another culinary discovery. With this dish...
10 signs you've met your soul mate
Not everyone believes that among 7 billion people there is only one destined for us. Those who believe in a “soul mate” usually mean...
Cooking is an excellent activity not only for adults, but also for children. By cooking, the child develops imagination and coordination. Plus, it's an opportunity to spend some wonderful time with your baby. We share with you...
14 signs of high intelligence that cannot be faked
Maybe this is just about you? People with high intelligence do not necessarily have to be the smartest, no matter how strange it may sound. In fact, this is...
One day you want to clean out your garage. But how can we ensure that this order is practical and not decorative? 30 best ideas for you!
Order in the garage means convenient open storage all frequently used tools and compact storage of various small items “in reserve”.
Often the garage and home workshop are combined, so all tools and consumables should have a convenient storage system.
As soon as the storage system becomes not very convenient for regular maintenance, the garage again turns into a spontaneous warehouse.
It is better to use open shelves to store tools in the garage. It will be very convenient if these shelves are removable.
In the garage of the workshop it is necessary to place not only the usual set of car enthusiast tools and home handyman, but sometimes also garden tools and camping equipment.
Make the most of the entire height of the room. In plastic boxes just under the ceiling and on the floor you can put those things that you use from time to time.
The tool storage system in the garage uses the entire wall area as a stand. Separate sections-shelves for storing tools and Supplies.
Wooden guides are used here, but it is better to use metal pipes for these purposes. If over time the guide we see in the photo crumbles, a box with a heavy tool could fall right on your foot. 
You can make such an organizer for storing consumables yourself from sheets of plywood, which are connected with hinges in the form of a book.
A lockable stand-up toolbox for the DIYer's tools allows him to easily maintain desired order in the garage.
Cut plastic containers are convenient for storing nails, screws and other small items.
Hooks made from scraps of plastic pipe not only guarantee safe storage of the tool, but are quite easy to clean.
It is inconvenient to keep a working tool in a box; it is much more practical to make such an open stand for storage.
The owner has a lot of necessary little things in his garage, and each of them has its own storage method.
Most tool storage methods are simple, but still effective.
Very convenient design for storing tools and consumables! Everything is at hand, everything is in order.
Each owner has his own scope of activity and a different number of tools. But a convenient organization of work always makes you want to do something more. Take the time to organize your garage.
Sliding panels like extra bed for storing tools. Make sure that they will work reliably without getting stuck in the grooves, otherwise this storage method will not be practical.
Simple and convenient. Store your instrument wisely! If you don’t have a garage, and you store all your tools at home, then even on the door of a small closet you can organize a small work organizer.
Let's continue for the happy owners of the garage. Here is a convenient way to store metal tools on a magnetic panel.
But our garage contains more than just tools. Cuttings of plastic pipes are just a hit for homemade systems storage
Another convenient way to store all kinds of accessories in the garage.
Cluttered garden tools can also create a cluttered garage. Let's make a simple storage structure.
It is not at all difficult to assemble such a ceiling structure from pipes and own garage for storing lengthy materials.
Large sheets of plywood and drywall are best stored this way - in a vertical position. And for scraps of boards, etc. You can make such a rack from a ladder.
We can put everything that is rarely used in large plastic containers, making such a simple design.
A small workbench can also serve as storage space.
Here is his diagram.
You don't have to clean out your garage in one day. All this can be done gradually, step by step.
WHAT IS YOUR OPINION?
Many car owners use the garage not only to protect the car from the elements, but also to store tools, gardening equipment and many things that do not fit in the house. As a result, the garage resembles a Bermuda triangle, in the depths of which it is simply impossible to find anything. However, proper arrangement of the garage can turn this room into a convenient and functional workshop, which, in addition to its main task, will help you save space. “Dream House” has collected the most amazing, beautiful, well-equipped garages in this review in order to use the example of the owners of these photos to show the possibilities of the premises and, of course, give practical advice on applying what you see in practice.
Arrangement of the garage
How to arrange a garage: making a plan
Before solving the problem of how to arrange a garage, calculate its area and mentally divide it into three zones: a zone for a car, as well as a working and free zone. Since the main purpose of the garage is to maintain a car or motorcycle, the place where the transport is located and the small area around this area should always be free.
Garage design inside photo
Next, depending on the type of work you do, consider how many tools you need to store in your garage. Many car owners keep working tools in random order, placing them on makeshift shelves, in old chests of drawers, etc. Such storage, firstly, clutters up an already small area, and, secondly, creates a lot of inconvenience. It is optimal if you sort the tools and other things stored in the garage according to their need, placing in the foreground only those items that you use regularly. However, even if you ruthlessly throw out all the unnecessary junk from the garage, it may turn out that there is sorely not enough space for its neat maintenance. But this problem can be easily solved with proper organization garage storage systems.
Hanging storage systems for garage photo
Organizing a storage system in the garage
1. Shelving
Racks are the best helpers for putting things in order in the garage. On sale you can find ready-made metal or plastic structures on which it is convenient to place tools, car accessories, garden paraphernalia, etc. When choosing shelving for your garage, first of all pay attention to their size and the distance between the shelves. It is much more convenient to use designs in which you can adjust the height of the shelves, because... in this case, you can store even large items on them.
Storage systems for garages
Shelving in the garage photo
Storing your bike and other things in the garage
Setting up a garage for motorcycles and bicycles
How to clean up your garage
Metal shelving for garage photo
2. Shelves
Shelves in the garage will be a great alternative to shelving, especially considering the fact that you can make them yourself. But before making and hanging shelves, check the strength of the walls. If the walls in the garage are uneven, it makes sense to pre-plaster them with a durable solution. When choosing the height of the shelves, remember that you will not be able to use them comfortably if they are located above chin level. To save space, you can place several shelves almost under the ceiling, but they are useful only for storing the most rarely used items.
Hanging metal shelves to the garage
DIY wooden shelves in the garage photo
If you store a lot of tools in the garage, purchase or make shelves with special holes in which you can place various screwdrivers, hammer drills, small garden tools etc. Such a simple product will allow you to systematize the storage of the most necessary tools, so you will no longer waste time searching for them.
Arrangement of the garage inside with your own hands
Wooden shelves for garage photo
Alternatively, you can decorate your garage using closed shelves created from old wall cabinets.
Hanging cabinets with shelves for garage
Beautiful arrangement of a garage photo
3. Tool boards and perforated plates
Perforated plates, equipped with holders of different lengths, will be useful to those car owners who store many different attributes in the garage. On such a slab you can place gardening tools, a stepladder, helmets, sports equipment and any other things that you use regularly.
Garage arrangement inside photo
How to store equipment in the garage
Storing garden tools in the garage
You can supplement the slabs with various hooks that will serve as holders for ropes or hoses, pull-out shelves for storing a change of clothes, etc.
Photos of garages inside
DIY garage ideas photo
Organization of order and storage in the garage
If necessary, durable brackets can be attached to perforated plates, which will ensure secure storage of wheels and bicycles in the garage.
Storage of bicycles, sports and travel equipment in the garage
How to store a bike in a garage
How to hang a bike in the garage
4. Garage furniture
Many people refuse to use furniture in the garage, believing that it will take up all the free space without bringing any visible benefit. This statement is true only in relation to old large-sized furniture, which migrated to the garage as unnecessary. Modern metal garage furniture is both multifunctional and compact. As a rule, the furniture for this room is a set of cabinets and chests of drawers, but if you want to create a garage and a workshop, it makes sense to complement the furniture set with a comfortable worktop.
How to arrange the inside of a garage with your own hands photo
Tool storage furniture in the garage with chalk signatures
Creative ideas for arranging a garage
The furniture corner is best located in the farthest corner of the garage. Set up your workplace for convenience hanging shelves, racks and drawers in which the tools will be located.
Furniture for garage and workshop
Workshop in the garage photo
Garage furniture
5. Basement
If your garage is equipped with a basement, then before you force it into conservation, old car tires, unnecessary tools, etc., equip it with the same racks and shelves. Although these products will take up extra space, they will help you organize your stored items, which will ultimately save space.
Neat arrangement of the garage
Garage design is an important step towards proper arrangement
When creating your dream garage, don’t forget about its interior. It so happens that few people pay attention to the design of this room; as a result, the garage looks gloomy and unpresentable. Often, owners simply plaster the walls of the room and cover the floor with concrete, which enhances the already uncomfortable atmosphere. You can give your garage a more attractive look with the right finishing. For example, it is recommended to use as wall decoration ceramic tiles, as well as plastic or plasterboard panels in light shades.
DIY garage interior photo
In addition, when choosing furniture for the garage, try to adhere to stylistic unity. Despite the fact that this room is classified as auxiliary, the more carefully you arrange it, the more pleasant it will be for you to be in it.
DIY garage interior design photo
Garage ideas photo
Setting up a garage takes time and creativity. But with a little effort, you can debunk the myth that the garage is a place for storing junk, turning it into a convenient and functional workshop and additional space for convenient and compact storage of things.
Many car owners use a garage not only to protect the car from bad weather, but also to store tools, gardening equipment and many other things.
The article discusses the most convenient and practical do-it-yourself garage accessories that can improve the operating comfort of this room. Here are detailed recommendations for the development and creation of structures intended for convenient storage tools and car parts, advice on making furniture, as well as arranging lighting and heating systems.
The garage is intended not only for storage, but also for servicing the car. For this reason this room It should be roomy, clean, comfortable and well-equipped.
To achieve all this, it is enough to take into account the basic requirements regarding the organization of space:
- The presence of shelves for tires and tool storage significantly saves free space and allows you to optimize space.
- The quality of lighting is of great importance, since not only productivity, but also the quality of small details depends on it. repair work.
- Construction of a garage workbench, machines, inspection hole and other devices expand the range of possibilities of the car owner regarding repair and service vehicle.
Helpful advice! All these elements should not occupy space exceeding 10-20% of the garage area.
Options for shelves in the garage with your own hands: photos and tips for arranging storage spaces
About 80% of the shelves in the garage are built with your own hands to store garage accessories, namely:
- tools and additional devices;
- components for the car;
- accessories.
Often in photos of shelves in a garage with your own hands you can see them combined with a rack, which you can also make yourself. Most often, the rack is considered as the main place for storing tools. After its installation, the remaining space is filled with comfortable and spacious shelves.
Be sure to designate a place where work clothes will be stored. It is not necessary to occupy a large area; you can get by with one shelf or even a hook (depending on your needs).
A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, and polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a sand tank.
To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.
Brackets and shelves for wheels in the garage: design features
The most bulky spare parts of a vehicle include sets of tires, which can be winter or summer. When winter tires are used, summer tires are usually stored in the garage, and vice versa. Therefore, you should organize tire storage shelves or brackets.
The design of the bracket is as follows:
- Two triangular frames made from corners. Between these frames, jumpers made of any durable metal are installed.
- The triangular parts of the structure are fixed on the wall in a pre-selected location. The wheels should be installed perpendicular to the load-bearing element stands. In this case, the tires should fall slightly between the jumpers, thus being fixed on the shelf due to their own weight.
Helpful advice! It is recommended to place shelves for wheels in the garage with your own hands as close to the ceiling as possible at the optimal height. Thereby car tires will not take up useful space in the garage.
For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with discs, which can be placed one above the other in a horizontal position. The structure can be made angular and raised onto the wall.
- wooden beam;
- boards;
- chipboard sheets.
Installing tire racks is the most efficient way to store wheels. Greater savings in free space can be achieved by hanging rubber from the ceiling base along the garage wall. This option possible if the room has a large height and reinforced concrete floors in the form of slabs on the ceiling. They will be used as a basis for screwing in dowels.
Tool storage: interesting ideas for a DIY garage
To organize a convenient area for placing things, you can make your own homemade and very spacious rack or shelves. Of course, you can find hundreds of ready-made models in stores, however, making a shelf in the garage with your own hands is much cheaper than purchasing a similar product on the market.
The same problem applies to shelving. By taking on the task of making your own tool storage space, you can not only organize a convenient and practical rack, but also fit it harmoniously into the garage space.
Helpful advice! The minimum load that the structure must withstand is 150 kg or more. In this case, the maximum load limit per section is 500 kg.
Rules for the manufacture of wood products:
- Better to use wood hard rocks, for example, beech, oak, hornbeam.
- Before assembly, it is necessary to treat the wood with antiseptic agents.
- The frame parts must be carefully polished to ensure safe operation of the rack.
- To make shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL slabs with a thickness of at least 4 mm are also suitable.
The thickness of the material is determined by the loads that will subsequently act on the rack.
Recommendations for making tool shelves in the garage with your own hands
Shelves are installed in cases where the garage does not allow for a shelving unit. It is better if there are several designs.
Scheme for creating shelves for tools:
- Plan the placement of shelves, determine their size and mark them.
- Prepare material in the form of boards and fasteners.
- Using a hammer drill, make holes in the wall and install dowels with hooks in them, which will provide enhanced fixation.
- Attach hangers equipped with eyelets to the boards. For metal hangers, it is recommended to use self-tapping screws or regular nails.
- Fix finished products using building level, otherwise the tool may fall from the shelves, which makes operation unsafe.
Helpful advice! When making shelves, it is better to give preference to several short structures, since one long product can break under the weight of the tool.
At the final stage you can do decorative finishing products (paint or special film).
Technology for creating a tool rack in the garage
To create a rack with my own hands You will need boards 9 and 19 cm wide. The size of the structure can be adjusted.
Step-by-step technology:
- An element 9 cm wide is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.
- The board, the width of which is 19 cm, should be cut into pieces 36 cm long. Shelves will be made from these parts.
- On the board that will become the base of the product, it is necessary to apply markings in those places where there will be spacers. It is recommended to indent 2.5 cm on each side.
- The top spacer is glued, then the top shelf, which already has a spacer, is nailed to it. The remaining parts are mounted in the same way. Installation of the lower strut is carried out at the end.
- The structure should be turned over and the spacers should be screwed together with the base of the product.
- The surface is thoroughly cleaned using sandpaper. After this, the product must be coated with two layers of oil-based varnish or another type of finishing.
- The structure is fixed to the wall using anchor screws. Fixation should be done both under the top and bottom shelves.
Helpful advice! To strengthen the product, wood blocks should be installed between the sections. They will allow you to evenly distribute the load throughout the rack.
Organization of lighting and heating systems in the garage
To make the operation of the garage comfortable, the lighting, ventilation and heating systems in the room should be properly organized. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in confined spaces is especially acute. For a garage, vents are suitable for brickwork. They are equipped with grilles.
Factors affecting lighting levels:
- garage area, its height;
- the number and nature of the placement of work areas (sizes of a workbench for a garage, inspection pit, number of machines);
- type of decoration on the walls, its colors;
- indicator of network power density per 1 m²;
- type of garage lights.
Can be used to maintain optimal temperature different kinds heating:
- gas;
- based on used oil;
- air;
- electric ( infrared heater for garage);
- oven;
- water;
There are many alternative ways organize your own heating system.
Features of halogen, fluorescent and LED garage lights
The technical characteristics of halogen lamps are in many ways similar to incandescent lamps, but their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include long terms service – 4 thousand hours.
Helpful advice! Products must be placed in lampshades. It is also worth considering stabilization aimed at protecting against spikes electrical voltage. It is not recommended to touch such lamps with your hands (the shelf life will be reduced).
Fluorescent lamps are filled with inert gases inside. The inside of the flask is coated with a specialized composition that emits ultraviolet light under the influence of an arc-type discharge. Recommended models include IP-65 class products, protected from moisture and dust particles.
Installation LED lighting in the garage comes with the highest costs. However, they pay for themselves in 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components, and the light does not have an aggressive effect on the eyes, so there is no need to purchase additional lampshades.
Installing lighting in a garage: how to calculate
To calculate the power of conventional lamps, you can use the formula:
P = S x W/N.
Explanation of values:
- P – total required power, W/m².
- W – power of one lamp, W.
- N – number of lamps (luminaires), pcs.
- S – room area, m².
For halogen and LED lamps optimal indicator is 16-20 W/m². This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.
The calculation is influenced interior decoration room walls. In dark garages, the lighting should be brighter.
Light reflection level:
| Room area, m² | Ceiling height, m | Wall color | |
| Dark | Light | ||
| 20 | less than 3 | 0,6 | 0,75 |
| 50 | 0,75 | 0,9 | |
| 100 | 0,85 | 1 | |
| 20 | 3-5 | 0,4 | 0,55 |
| 50 | 0,6 | 0,75 | |
| 100 | 0,75 | 0,9 | |
| 50 | 5-7 | 0,4 | 0,55 |
| 100 | 0,6 | 0,75 | |
To illuminate the inspection pit in the garage, it is recommended to use low-power lamps with halogen or LED lamps, since moisture accumulating in this place can cause an electric shock. The devices are mounted on the sides in pre-made recesses.
Helpful advice! To prevent an accidentally dropped tool from breaking the lamp, the design of the lamps can be made retractable. When the pit is not in use, the devices are securely hidden in the recesses.
Do-it-yourself autonomous lighting system in the garage
There are a number of principles on the basis of which an autonomous lighting system is implemented:
- LED strips are mounted inside the lampshades (there are 300 diodes per element).
- The switch is output strictly to the panel.
- A suspended ceiling system is used for electrical wiring.
- The wires are powered by a battery connected to the network via a charger.
A multi-level lighting system for a garage is considered the most optimal. It involves installation big lamp in the middle of the room and installing small lamps in work areas.
Height calculation for a multi-level system:
| Level | Height, m |
| 1 | ceiling base |
| 2 | 1,8 |
| 3 | 0,75 |
| 4 | 0,4 |
The lamps are installed correctly if the machine does not cast a shadow on either side.
Which heater to choose for a garage
Heating of the garage is carried out using small portable devices that are able to warm up the room in a short time and subsequently maintain the optimal temperature.
When thinking about which heaters are best for a garage, many mistakenly believe that homemade device can be made exclusively from expensive components and requires a significant investment of time. For this reason, garage owners refuse this idea.
In fact, to make a garage heater with your own hands, it is enough to limit yourself to budget materials, for example, thermal film. The scheme for creating such a device is very simple and involves the use the following materials and tools:
- a kit intended for assembling a heater;
- wire equipped with a plug;
- paper laminated plastic (area of one element 1 m²);
- graphite powder;
- epoxy adhesive composition.
Helpful advice! Be sure to have a multimeter with you. This tool is useless when assembling the device, but it will be needed to check for functionality.
Thermal, or - a common heating option in the garage
Recommendations for assembling a homemade garage heater
Step-by-step instructions on how to make a garage heater:
- A mixture of glue and graphite powder is made. The more powder in the composition, the stronger the heating of the device will be. The average temperature ranges from 60-65°C.
- Plastic sheets on the rough side are coated with a mixture of glue and graphite, which is applied in zigzag strokes, after which they are fastened with their faces and fixed with a frame made from wooden slats.
- Terminals are attached to the graphite conductors and the structure is dried. Drying must be complete, otherwise moisture will damage the device.
After the heater has dried, the resistance should be checked. A garage heater is considered safe only after this check. Until this point, it is strictly forbidden to connect the device to the electrical network.
Safety restrictions:
- It is not recommended to leave the device switched on unattended or near children.
- It is prohibited to use equipment that can cause a fire.
- Do not place flammable substances or materials near the device.
Making useful gadgets for your garage with your own hands
To carry out repair and service work, you will need to build an inspection hole in the garage with your own hands, the dimensions of which will correspond to the dimensions of the car, as well as a workbench for comfortable work, plus equip the premises with machines.
Basic set of tools and materials for creation homemade workbench for garage includes:
- boards and wooden blocks;
- fasteners and ties;
- plane and other woodworking tools;
- varnishing and carpentry adhesives;
- sandpaper and drying oil.
Example of placement in a garage useful devices: 1 - s manual machines, 2 - racks and cabinets, 3 - table for various repair work, 4 - shelf for storing tires, 5 - inspection hole
Technology for making a workbench in the garage with your own hands: photos, drawings
The workbench consists of a table top and a base, as well as several clamping devices. The height of the workbench in the garage should be selected taking into account your own height. You can take the height as a guide kitchen table in a house that is convenient to work in. Be sure to make drawings to create.
Helpful advice! Ready-made drawings of a workbench for a garage, which can be found on the Internet, are suitable as a basis for self-made designs. If desired, you can customize it to suit your needs.
Garage arrangement: how to make a workbench indoors:
| Work stage | Details, size in cm | Mounting type |
| Assembling the tabletop | 20 boards (5x10x200) with grooves 2.5x2.5 in the 5th and 16th element (step 25) | Adhesive composition metal ties |
| Drying | - | - |
| Making legs (4 pcs.) | Block (10x10x80) with grooves for brackets on the front supports | Brackets |
| Assembling the base of the underframe | Frames (2 pcs.) made of boards (5x10) | Tenon connection to a depth of 2.5 cm and bolts |
| Fixing the side and rear support walls | Chipboard boards (thickness 10 mm) | Screws |
| Fixing the tabletop to the upper frame | - | Bolts |
Final processing involves impregnating the finished product with drying oil and opening it with varnish.
Recommendations for creating a viewing hole in the garage with your own hands
There are no specific sizes for a garage inspection pit. The dimensions of the car are taken as the basis.
How to make an inspection hole in a garage with optimal parameters:
- The width is selected so that there is enough space inside to work. The size is limited by the distance at which the car's wheels are seated. Each wheel needs small area to perform maneuvers. The average pit width is 0.8 m.
- The length of the pit is limited by the length of the machine. 1 m should be added to this indicator.
- The height of the garage owner is used to calculate the depth. Another 10-15 cm is added to it.
How to properly make a viewing hole in a garage using different materials:
| Material | Wall thickness, cm |
| Ceramic brick | 12-25 |
| Concrete | 15 |
| 20 |
The pit is dug taking into account the optimal width of the pit, the material chosen for the walls, as well as the thickness of the waterproofing layer. Stages of creating a pit:
- marking;
- construction of a pit;
- arrangement of the pit;
- construction of walls;
- lighting gasket.
For waterproofing walls, specialized hydrophobic impregnation is used.
Helpful advice! Using formwork, you can make reinforced recesses in the walls of the pit to accommodate tools and lighting fixtures.
Making a garage press with your own hands
To create a press, it should be made from 4 pieces metal pipes frame size 178x80 cm. These elements are connected by welding. It is recommended to be guided in your work by drawings, selected or compiled in advance. After this you need to install:
- retainer;
- removable stop;
- bottle jack (hydraulic).
You can use video materials to review the detailed technology for creating useful devices for the garage with your own hands. Such visual recommendations help to navigate the size, master step by step instructions and imagine what appearance must have a ready-made design.
Manufacturing diagram: 1 - upper power platform, 2 - nuts, 3 - lower platform, 4 - studs with a diameter of 30 mm, 5 - lower thread of the studs, 6 - hydraulic jack bottle type; 7 - base 20 mm thick
You can do it yourself. The list of useful devices does not end there. It can always be supplemented with any interesting ideas. The main thing is that the garage fully meets personal requirements in terms of comfort and convenience.
Practical storage systems for the garage or workshop.
For many people, the garage is not only a place to store a car, but also a real automotive, metalworking and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it’s so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in “men’s Eden.” This review contains simple and yet effective ideas that will help you create almost ideal storage systems in your garage.
1. Magnetic tape
Magnetic tape for storing small metal parts.
Magnetic tape glued to the wall in the garage can be used to store drills, scissors, bolts, nuts and other small metal parts. This magnetic holder is very convenient to use and will help prevent the loss of small but important spare parts.
2. Plastic containers
Rack made of plastic containers.
From large plastic containers and pieces of wood, you can build a large rack for storing tools, wires, spare parts and any other things. Organizing such a rack will allow you to restore order and significantly save space in your workshop or garage.
3. Rails
Rails for garbage bags and paper towels.
On one of the free walls of the garage you can place several small rails on which you can conveniently place rolls of garbage bags, paper towels, sandpaper, tape, coils of rope and much more.
4. Furniture brackets
Brackets for storing furniture.
Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.
5. Jars
Storage of nails, bolts, screws and other small items.
Bolts, nuts, nails, self-tapping screws, screws and other small things do not take up much space, but storing them mixed is extremely inconvenient. Jars with lids screwed to the bottom of a wall cabinet or under the desktop will help you put these things in order.
6. Ceiling grille
Grid for storing pipes and baseboards.
A plastic grid screwed into the corner of the garage under the ceiling is ideal for storing leftover water pipes, baseboards, profiles and other long items. Such a storage system will help significantly save space in the garage and prevent possible breakdowns of fragile building materials.
7. Organizer for screwdrivers
Wooden organizer for screwdrivers.
A small practical organizer for screwdrivers that any man can make by simply drilling the required number of small holes in a block of wood. This product can be hung on one of the walls of the garage or workshop to store all the screwdrivers in one place.
8. Vertical storage systems
Vertical panels for storing things.
Several perforated panels made of metal or plywood under a table or in a cabinet will provide an ergonomic and convenient place for vertical storage of small hand tools.
9. Plastic pipes
Storage systems made of PVC pipes.
Leftover PVC pipes of different diameters can be used to create a variety of storage systems. For example, pieces of wide pipe screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of medium-diameter PVC pipes you can make cells for storing various sprays, polyurethane foam, tubes of paint and other containers.
10. Tassels
Hanging storage for brushes.
It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.
11. Rack for garden tools
Wooden rack for garden tools.
To prevent garden tools from taking up a good third of the garage space, store them on a special rack screwed to one of the walls. You can make such a rack yourself from blocks of wood, a wooden pallet or pieces of plastic pipes.
12. Multifunctional rack
Pallet rack with shelves.
A wooden pallet, complemented by shelves made from pieces of wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.
13. Rod holder
Fishing rod storage.
A simple wire lattice can be used to create a convenient fishing rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot during the autumn-winter season.
14. Pegboard
Garage tools are indispensable items for every car owner. Quickly unscrew the bolts that secure the wheel, and then change it, drain and refill with fresh oil and antifreeze, even just clear snow or ice from the car windows - a tool that should always be at hand will help you do all this.
This includes gardening and construction equipment, often stored in such premises. This article offers recommendations on how to store tools in the garage correctly, and how to make some products with your own hands.
What tools are needed in the garage?
The garage is equipped with everything necessary based on the preferences of its owner. The specifics of performing repair or other types of work determine the presence of various equipment and tools in the garage. Despite the wide variety of jobs, it is advisable to have some garage tools in every room.
These include:
- A set of keys, better with a special ratchet.
- Set of heads.
- Screwdriver set.
- Pliers.
- Wire cutters.
- Round nose pliers.
- Torque wrench, which allows you to select the correct tightening torque and ensure high-quality fastening of the wheel, this is especially important when replacing it on a car.
- Set of mounts.
- Universal clamp.
- Retaining ring remover.
- Chisels.
- Magnet kit.
Various electric and pneumatic tools also make repair work easier.
It can be:
- Electric drill.
- Impact wrench.
- Bulgarian.
- Sander.
- Electric lift.
- Welding machine for complex repairs.
Car enthusiasts purchase many tools and devices at their own discretion, and some even make them themselves.
How to make a pipe bender
Owners of homestead farms often need to bend pipes or strips of metal, for example, when making their own greenhouse or laying a water supply system. There are many solutions to this problem. One of the options is shown in the photo.
To make a pipe bender you will need:
- Tree.
- Three polyurethane keel rollers for a boat trailer, which are fixed by goujons on the shafts to prevent rotation.
- Steel angles that hold the rolled pipe in a perpendicular position and prevent it from bending into a spiral.
- Stud and nut or threaded plate. These elements are needed to tighten the roller from below. Each time the pipe is rolled, the nut or threaded plate is tightened half a turn. If you need to make a bend of a small radius, but the result is a circle correct form, you may need to make from 50 to 100 runs.
- Handle with bracket for rotating the pressure roller.
Pipe bender - bottom view
The order of work is as follows:
- Wooden blanks are cut out.
- Holes for the axles are drilled.
- Axles with rollers are assembled.
- IN vertical racks bearings for the axles are inserted.
- The assembled units are mounted on the base of the pipe bender, and the guide angles are attached.
- Guide plates are fixed to the top of the base post.
- The upper part of the tool is assembled. A shaft with a roller and a handle are inserted, a pin or a long bolt is installed from below for the clamping nut.
When making a tool, special attention should be paid to the distance between the rollers. Each pipe has a minimum bend radius. The greater the distance between the rollers, the larger it will be.
In this case, less bending effort is required, and the end of the pipe will remain unrolled. The stroke of the pressure roller should be made as long as possible.
These points must be taken into account at the design stage and it is necessary to provide for the ability of the rollers to change their position if necessary. Therefore, in order for the pipe bender to be used repeatedly, the dimensions of the tool must be taken with some margin.
How to make a screw clamp
To attach a pipe bender to a workbench, as well as to perform other work, you will need various clamps. Price large quantity products of different sizes is quite high. Therefore, if you wish, you can make such designs yourself.
To make a screw clamp you will need:
- Profile metal sheet, approximately 10 millimeters thick.
- Metal rod with M10 thread at one end.
- Several M10 nuts.
The manufacturing procedure includes:
- A bracket is marked on a sheet of metal. For this you can use ready product or prepare a template yourself, at your own discretion, taking into account the requirements of operating conditions and the required dimensions.
- The workpiece is being cut. In this case, it is better to use an acetylene torch or gas cutter.
- The edges are cleaned with an angle grinder and the burrs are removed.
- Several M10 nuts are welded on the smaller side of the bracket or a hexagonal rod up to 50 millimeters long with an M10 thread along the entire length in the center of the part.
- An M10 thread of the required length is cut on a round rod with a diameter of 10 millimeters.
- Performed protective covering All elements are coated with oil or nitro paint to protect against corrosion.
A homemade garage tool may also have a more complex manufacturing process, which requires special equipment and skills.
Tip: Before use homemade instrument for a garage, you need to make sure of its quality, and most importantly, its reliability when working with it.
How to properly store tools in the garage
If it is quite difficult to make a tool for a garage with your own hands, then every owner of the premises can perform the correct and convenient placement of the tool in the garage.
In this case:
- To properly organize the space where they will be placed small parts, you can equip several rows of long shelves along the wall (see), where you can then place garage tools.
- Large items are placed in plastic containers, large-capacity boxes or special boxes.
- Small fastening tools can be stored in homemade blocks, using small food containers for this. A metal washer is glued to the bottom with superglue and attached to the wall through a strip with a magnetic strip.
- It is convenient to hang small tools available in the garage on hooks that are attached to a long wooden strip fixed to the wall.
- A special stand on the wall is perfect for storing frequently used tools.
- Metal brackets are made for hacksaws and bow saws, which can be nailed to the doors or screwed with small screws.
- Power tools in the garage are perfectly stored on racks (see) or shelves.
Tip: During the winter, power tools should be stored in the packaging in which they are sold, these can be portable plastic boxes with a handle, which will protect the product from the negative effects of moisture and mechanical damage.
- Garden tools with long handles can be attached to special metal hooks.
Advice: Special racks should not be made for mowers, wheelbarrows, concrete mixers and other large equipment. And place metal hooks closer to the garage door.
- It is convenient to store a semi-automatic welding machine or another type of machine on a special cart. Its use has the following advantages:
- welding equipment is easy to deliver to the work site;
- there is a possibility to fix gas cylinder for welding, which does not have good stability;
- saving space in the room.
It is not at all difficult for a garage owner who knows how to handle welding to make such a design himself.
The video will show you how to secure the tool in the garage, correctly place different shelves, racks and other equipment to ensure convenient use of it. Convenient, serviceable and always at hand the necessary tool - comfort in the garage for any car owner.
For a man, a garage is a second home in which he spends most free time. In order not to get lost in the amount of equipment stored in the garage, let’s put everything in its place. Let's look at the issues of zoning and landscaping space, learn how to make your own racks, workbenches and practical holders for large and small things.
Zoning the premises - dividing the garage into functional areas
Whether you're starting a project from scratch or thinking about remodeling your garage, good option for construction - two-tier zoning of space. There will be a workshop on the top floor, and a basement and pit on the bottom. Let's look at an approximate plan for the location of zones in the upper part of the garage, taking into account the convenience and specifics of the room.
Zone No. 1 is transitional. Set up a place for items that you will need when leaving the room: racks for outerwear and shoes, shelf for keys, mobile phone, bags. The transition area should be close to the door and not cluttered with the work platform, shelving or other objects.
Zone No. 2 – for household items. This space can be organized for storing items that you need in Everyday life. If you have pets, design a small rack for food and canned food. for newspapers, coffee machines, electric kettles and microwaves. The area can also be used for storing things in bulk that do not fit in the cellar.
Zone No. 3 – shelving. There may be several sites for the installation of high shelving, depending on the area of the workshop. We store gardening tools, spare parts, and work equipment in them.
Zone No. 4 is auxiliary. This is where we store large items and things that you rarely use. For example, recreational equipment, holiday decor. If desired, the corner can also be equipped with a rack for storing a set of summer and winter tires.
Zone No. 5 – sports corner. Set aside space for bicycles, rollerblades, scooters, and make a net for balls. Provide hooks, holders and nets for them so that nothing rolls down and stays firmly in place.
Zone No. 6 – work space. Equip this area with maximum comfort. Provide universal workbench for gardening, woodworking and auto repair, convenient sliding cabinets, shelves for storing small items. And don't forget about lighting. A window will be a big plus; if it is missing, use artificial lighting by connecting several 60 and 80 W lighting lamps.
Inspection pit and basement - we arrange it comfortably
Car repairs can be carried out without an inspection hole. However, an experienced car enthusiast knows that in this case it is more difficult to get to the underbody parts of the car. The back and neck get tired quickly, you have to constantly take an uncomfortable position, search the right tool also becomes difficult. An inspection pit with a basement helps the master get rid of all these problems. The first thing you need to start with is adjusting the pit to the height of the master. You should not touch the ceiling with your head and reach the parts of the lower part of the car. Add 10 cm to your height, the final number will be the comfortable depth of the inspection hole. We select the length and width of the opening according to the dimensions of your car, based on generally accepted standards. We strengthen the side parts of the recess with metal corners and cover them with boards. This finishing will extend the life of the walls and ceilings.
Don’t forget about lamps and storage niches in the side parts of the pit, in which you can put necessary tools and parts for car repairs. For ease of descent, provide a ladder or steps and a ceiling that can be used to cover the pit after completion of the work. Make it out regular boards or automate using a lifting mechanism. This way you won’t drop your tools into the hole and will protect yourself from accidentally sliding down.
An additional advantage of arranging a viewing hole is. You can store canned food and vegetables in it for the winter. When building a cellar, do not forget about ventilation and a light at the entrance.
When building a pit from scratch, consider important point- level groundwater. It should be below the floor of the pit and cellar. To build walls, use durable materials (foam blocks, M400 concrete).
Basics of installation and design of rack structures
Before placing it, decide on its dimensions. Its dimensions should not interfere with work, clutter up the garage space or interfere with the car’s turn. The best option– installation of a rack against the wall. The height of the rack depends on the size and number of items. The lower shelves are reserved for storing large items (jacks, fuel cans, welding machine). We also place the tires below or provide them with a separate shelf higher. To prevent the rack from bending due to the weight, we pay Special attention the bottom of the structure. We make it from a thick board or sheet of metal. The depth, width and space between the shelves of the rack are selected individually. Considering the average sizes of equipment and parts, the dimensions vary from 0.5 to 1 m.
To strengthen the structure on the sides we use vertical and transverse metal corners. After welding the corners, we assemble the frame according to the project, clean and prime the beams. If the frame is made of metal, we coat it with an anti-corrosion compound. After assembling the supporting parts of the rack, we cut the boards to the appropriate length. We also treat them with impregnation and open them with enamel. We fasten the boards with screws, making sure that the shelves fit tightly to the frame. To attach the rack to the wall we use large anchor bolts. To make it more convenient for you to sort your tools, we bolt a container to the side of the rack, where we put screwdrivers, car testers and other small items for work.
Workbench – preparation of the master’s workplace
One of the main elements of arranging a garage is a workbench. This is a master’s workplace that receives special attention. Before designing, we calculate the free space and outline the project according to it. We weld the workbench frame from profile pipes and metal corners. The average height of a workbench is 0.9–1 m. This parameter depends on the height of the master and his preference to work sitting or standing. After assembling the frame, we coat it with an anti-corrosion primer. We lay the base of the tabletop from a thick board 7.5 cm thick. If there are no boards, we fasten 7 sheets together thin plywood, seating them on PVA construction glue. After fastening the sheets, we place them under a press so that they are finally fastened together. Cover the base of the tabletop metal sheet 5–6 mm thick, cover it with an anti-corrosion primer.
We cut off the excess parts of the sheet with a grinder or a metal file and finally attach it with screws, drilling holes for fastenings in wooden base countertops. This surface is suitable for both carpentry and plumbing work. If desired, we equip the workbench with retractable or sliding cabinets with shelves. We hang a perforated screen on the wall above the workbench. Here you can hang the tools that you most often use in your work, providing them with shelves, hooks, and also homemade designs for nuts, bolts, self-tapping screws.
A simple floor tire rack option
It's hard to imagine a garage without a set of replacement tires. Most often they are stored in bulk. To solve this problem, consider a simple shelving unit that doesn't require any special carpentry skills. If you have free space in the garage, this option is suitable for you. floor stand. As an example, consider a two-tier rack that holds two sets of tires with a tread width of 265 mm. Floor shelving dimensions:
- width – 1.1 m;
- depth – 0.5 m;
- total height – 1.83 m.
- the distance between the shelves is 0.7 m.
If you store truck tires in the garage, you need to recalculate the dimensions. When choosing the width of the lumber, keep in mind that it can withstand a load of approximately 180-220 kg, depending on the weight of your tires. We recommend using 1.5 x 3.5 inch wood beams. To assemble the front part of the rack, we saw off two beams 183 cm long. These will be the side parts of the frame. We saw out 3 front partitions 1.1 m long. To connect the front to the back, we sawed off 6 strips of 0.5 m each.
Floor tire rack
We connect the side supports at the upper base with a longitudinal partition. Moving down in increments of 0.7 m, we attach two more longitudinal partitions to the supports. After this, we drill holes for 6 short strips and fasten them to self-tapping screws on the sides opposite the longitudinal partitions. The front frame is completely ready.
Similarly, we assemble the rear part of the rack and fasten it to the front frame. For reliability, we tighten the structure with straps on the sides. The shelf is ready, load it with tires. In order for the stand to serve for a long time, we cover it with wood impregnation, paint it and varnish it.
Hanging shelf for cordless power tools
A practical and beautiful option for storing cordless tools - hanging shelf with holders. At the bottom of the shelf there will be a drill and screwdriver different power, and on the top of the structure there are charging devices batteries. There is no need to store power tools in a case, everything is at hand. The shelf saves space and hangs on the wall. To assemble it, we prepare a board with a wall thickness of 2 cm. We measure the dimensions of power tools to select optimal size slots. We cut out short strips for attaching tools. For example, to hang 5 power tools you will need 4 strips 2 cm thick. This gap will allow you to hook a drill, screwdriver, securely fixing them in the support. We make the vertical strips higher and fasten them together with self-tapping screws.
The working height of the side parts of the structure is 23 cm. The part protruding beyond the upper edge of the shelf plays a decorative role and serves as a limiter for chargers and tools. We calculate it individually, based on the height of the equipment. We saw off two shelves, connect them with T-shaped stands for power tools and sidewalls, not forgetting to first attach square strips measuring 2x2 cm to the inner parts. We attach the top shelf in increments of 11 cm from the bottom shelf. The structure is ready. All that remains is to coat the shelf with wood primer, paint and varnish if desired. We hang the mini-rack on the wall and fill it with tools. Order has been restored here.
Simple designs for cutters, keys, files and fasteners
So that the workshop in the garage looks neat and the master can find the tools and fasteners he needs at any time, we will design several simple and convenient suspended structures. We prepare thick foam plastic and attach it to the wall on a 3 cm thick plywood backing. We fasten both parts together using liquid nails or PL 500 mounting adhesive. We wait several hours until the structure has firmly set. Thanks to the porous structure of the foam, sharp and rotating objects easily enter and are firmly fixed in the material. We insert bits, drills, cutters, crowns, keys, screwdrivers, awls, hubs, files into the foam. The ideal place to place the foam panel would be the wall above the workbench. If there is no perforated screen hanging above it, this a good option diversify the interior and concentrate cutting tools in one place.
Make a small stand near the wall next to the electric saws to store grinding wheels and cutting discs. Take regular disposables or old ones plastic plates, cut them lengthwise into two equal parts. You will get semicircular pockets. Cover the cut edge with tape, hiding and decorating sharp corners. We repaint the stands with a spray can in the desired color and fasten them to the wall with bolts in three places, below and on the sides. The storage pockets are ready; we insert grinding wheels and saw blades into them.
To prevent containers with nuts, bolts and screws from cluttering up your work space, use the idea for creating hanging structures. For the first option, prepare plastic jars. Remove the cover and attach it to wooden shelf on self-tapping screws. Fill the jars with fasteners and other small items for work, screw tightly to the lid attached to the shelf. The number of designs depends on your needs. Hanging storage jars can fill the entire lower part of the shelf. This design saves usable space and is very practical.
We make another original mini-rack for storing small items in the garage from food containers with a magnet. Using super glue, attach a round washer-shaped magnet to the bottom of the container. We attach to the perforated screen wooden slats with magnetic strips. Inside the containers we store screws, nuts, bolts, self-tapping screws and other small items that are lying around in the workbench drawer. We hang the boxes from a magnet.
